Stitching: Aperture 3 and Microsoft ICE

Hi forum members.
I recently switched from Aperture 2 to 3. I use Microsoft ICE for stitching panaromas.
Before i can use ICE for stitching, I have to export my Canon CR2-RAW-files to jpeg.
Stitching worked well with the exports from Aperture 2 but now i only get a message that the selected photos don't overlap. It's got something to do with the export from Aperture 3 (with metadata).
Anyone who has experienced the same problems ... and solved them?
Help would be very much appreciated.

Hi MacGyver,
Do you rotate/crop your photos in Aperture ? If so, you have to export your photos at a % size, not restricted to pixel sizes. Pixel-sized output will put rotated photos out of proportion with each other.
If that's not the case, sorry, I have no answer.

Similar Messages

Aperture, Photoshop, and Apple's possible direction for Image Editing

All,
After using Aperture now for several days, and reading many different forum topics, in particular this one which speaks of desired enhancements to Aperture:
http://discussions.apple.com/thread.jspa?threadID=253594&tstart=0
there is one thing that really sticks out on my mind. While all of us photographers have slightly different specifics to our workflow, in general they are very similar. And with respect to Aperture, there is one huge area where most of us seem to be hitting the brick wall: image adjustments, and by extension, image file management. Let me explain what I mean.
I think it is a fair generalization to say that the vast majority of serious digital photographers are using Photoshop (or some other image editing app, but I'm just going to refer to Photoshop for convenience) for post-processing of some kind. In using Aperture, and figuring out how to fit it into workflow, we've got this situation of how to move from organization and image library management to the full gamut of image adjusting functionality (photoshop) and back again to library management. The need to use photoshop then exposes the issue of how files are stored on the filesystem, etc. Stay with me here...
I have found myself thinking, and it is pretty clearly demonstrated in the forum topic mentioned above where folks are making suggestions for improvements to Aperture, that there's this barrel people are over in knowing whether Photoshop and Aperture should live in the workflow together, or whether Aperture should (or is intended to) replace Photoshop in the workflow. This got me to thinking about the fundamental question -- what is the intent, i.e. the vision for Aperture? Is it meant to replace Photoshop, or restated, is Aperture meant to be the app in which all image adjustments are to be made, OR is Aperture meant to just ease workflow, and is it intended not to be the primary app for image adjustments, but rather integrate with the primary image adjustment app?
The reason I bring this up is that the answer to this question makes all the difference in what enhancement requests and what people should expect from Aperture now, and in future versions. If Aperture is the primary place for image adjustment, then its obvious that there are some very significant additions that need to take place to Aperture, and likewise, the issue of putting images on the filesystem becomes much less important. However, if Aperture is a workflow-easer, then such image adjustment improvements are minimally important if at all, and filesystem / Photoshop / PSD file integration becomes paramount.
I know what Aperture does, what features it provides, etc. But I can't help but realize that its not really that clear (or I just don't understand yet) what the full scope of Aperture now and in the future is intended to be, and the forum topics are pretty decent documentation of the fact that the user base at this point is fairly cloudy on that too.
I can't help thinking that in the midst of the Apple pro line of tools, where we have tools that edit: video, audio, DVD creation, text effects, and now digital photography workflow, that there's one glaring hole: static image editing, i.e. a direct Photoshop competitor. I went through the Aperture video demos before Aperture shipped, and watched these photo pros talk incessantly about how "now there's an app that addresses how I work -- Aperture". That's great, but Apple has to know the role that Photoshop plays in present photography workflow -- for those pros too. So I'm sitting here thinking to myself, why would Apple roll out such a product with some clear workflow hurdles to common Photoshop usage.
Ok, here's the punchline: does anyone else here have a sneaking suspicion that Apple is not to far off from releasing their own image editing application that's a direct Photoshop competitor? I mean come on, Final Cut Pro, Motion, Sountrack, and by extension of the CEO to Pixar, Renderman. How can you not have a static image adjustment application entering the scene at some point?
I'm curious what others think. I'm just trying to make sense of how to fit the neat stuff I see in Aperture into a workflow that doesn't play very nicely with Aperture at some points (because I'm using Photoshop).
Brad
Powerbook G4-1.33GHz-17" / Powermac G4-1.4GHz Mac OS X (10.4.2) PB: 1GB RAM, Radeon 9600-64MB / PM: 1.25GB RAM, Radeon 9000Pro-128MB

So Apple adds curves adjustments,
we'll need noise reduction, greater sharpening
capability, etc., etc., and then when we have all
those features, surely we'll need masking and select
capability to perform those adjustments selectively,
etc. Where does it end?
Actually that could be a good cut-off point - add a few more/better 'global' adjustments but leave all mask, selection and layer based tasks to external editors. Personally, I used to swear by curves, but haven't really touched them in PS for a year since shooting more RAW and learning how to use the shadow/highlight adjustment properly. Sometimes for overall colour for JPEGs, but that bit can be done just as well in levels.
My workflow isn't particularly typical, but here goes.
Type of photography - stitched panoramas as a professional, plus general snapshots/nature/landscape as hobby. Single user with no network storage.
Currently I use a very organised folder structure in the Finder, along with aliases in DragThing docks for easy access to final stitched files, all with their own unique ID. RAW conversions are done in ACR/PSCS2, or Bibble if I'm in a hurry on the laptop. About 40% of the panos are shot in RAW, 40% are bracketed JPEG and the remaining 20% are 'single' JPEG. The panoramas go through quite a lot of post-processing in PS using a whole series of actions and AppleScripts.
I'm expecting my workflow to look something like this:
1) Download directly into Aperture, possibly with added help from Automator/Applescript when it comes to proper date-based names.
2) Divide download into a new album for each panorama.
2a) If it is a people pano there will be quite a lot of duplicate shots for each panohead position - make a stack for each position and choose picks - this bit will speed things up enormously by itself. Reorder stacks to fit correct order of images going around the scene.
3) Export to TIFF (sometimes JPEG) and stitch using PTMac (sometimes Realviz Stitcher). Oh, and any people who think Aperture is limited, buggy and bad value should go and look at Stitcher - it costs the same, has a far more limited feature set, is on version 5 and by comparison makes Aperture look bug-free.
4) Bring stitched panorama into Photoshop to adjust seams through layers if needed, flatten, final tone adjustments (usually using shadow/highlight), possibly some colour tweaks, sharpen. For bracketed shots I will blend together the three exposures at this point using a custom action - this kind of thing is unlikely ever to make it to Aperture.
5) Bring final print-ready file into Aperture for cataloguing/backup.
5a) If file is too big for Aperture, make a smaller version for cataloguing and store original file in Finder. This gives me a good file for 90% of purposes, with the huge file available with a bit more work.
Too big? I've found that Aperture gets sluggish with files over 18-20,000 pixels wide, and chokes totally somewhere between 25,000 and 32,000 pixels wide - 'image format unsupported'.
To summarise - organise and convert in Aperture, stitch in specialist software, do PS-specific stuff then bring final image back in to join the source images.
Ian

TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the

Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.

How can I install Aperture on my new Macbook Pro. I am up to date with my Mac Pro, I have the Aperture 1 and installation disks but cant remember how I got to 3. Can anyone help? Many thanks regards Alf

I have an up to date version of Aperture on my Mac Pro, and I would like to install it on my new Mac book Pro. I have the original installation disks for Aperture 1 and 2. I cant remember how I got to Aperture 3, I think it was via a web download but not sure. I have checked my purchases in the App Store but there is no indication of me buying an upgrade to Aperture 3.
Ive tried to download it from the App Store but it wants me to pay again.
Can anyone help on how to install Aperture 3 on my new Macbook .
Many thanks regards Alf

Then you can download the Trial version of Aperture 3 and unlock it with your serial numbers - you will need all three for all three versions: A current link to the Trial version is in this support document, also instructions on how to reinstall on different systems:
Aperture 3.4: May quit unexpectedly on launch after updating
Regards
Léonie
BTW: Your Aperture 3 serial number will be displayed in the "About" panel - the panel you see, when you use the command "About Aperture" from the Aperture menu in the main menu bar.

I use Windows Vista and Microsoft Outlook. After migrating to iCloud, the calendar of iCloud tranferred only part of my past Calendar items to the folder iCloud Calendar in my Outlook. How can I transfer all the entries?

I use Windows Vista and Microsoft Outlook. After migrating to iCloud, the calendar of iCloud tranferred only part of my past Calendar items to the folder iCloud Calendar in my Outlook. How can I transfer all the entries? In iCloud's site all are there.

If the calendar is on iCoud.com, all you would need to do to get it on your phone is go to Settings>iCloud on your phone, sign into your iCoud account and turn Calendars on. The iCloud calendars will then download to your phone.

MAJOR PROBLEMS WITH IPHONE 3G AND MICROSOFT EXCHANGE!!!! PLEASE HELP!!!!

Ok,
My exchange server at work was synced to my iphone and has worked with no issues. I then exchanged my phone because there were issues with my bluetooth not syncing properly. So with this new phone, it prompts me to enter in my exchange server password every few days. I contacted my IT department as well and microsoft to get this issue resolved because I assume that there were issues with the exchange server. They were both able to see an event viewer and it showed that my iphone was attempting to log in numerous amounts of times, which locks out my account after 3 incorrect log ins. Even when I erased the exchange account from my phone, it still showed that the phone in the event viewer was trying to log in over and over again. I then did a master clear and restore and the process was removed in the event viewer. So then I called my IT department to unlock my account after I cleared everything. I was able to sync everything again with it working properly. Now its a day later and the my exchanger server prompts me to enter in the password AGAIN and my exchange account is locked AGAIN because the event viewer at work is showing the same issues. Is my Iphone not saving the password correctly? What do I do? My IT department even created a dummy account to see if a new account would fix the issues but yet no cigar! HELP!!

The iPhone you returned is still syncing against your server and locking out your account. Someone possibly has access to your mail data. I'd recommend having your Exchange Administrator install the Microsoft Exchange Server ActiveSync Web Administration Tool (http://www.microsoft.com/downloads/details.aspx?FamilyID=E6851D23-D145-4DBF-A2CC -E0B4C6301453&displaylang=en) and attempt to wipe/delete/block that other iPhone.
Message was edited by: ethanm

I have updated to ios 7 and Microsoft outlook web access for work emails no longer works nor my remote access can you help

I have updated to ios 7 and Microsoft outlook web access for work emails no longer works nor my remote access can you help

This happened to me as well. I read somewhere else that resetting the network settings (General, Reset, Reset Network Settings) would help and it partially did. I get half (the folders) of the Web Access screen rather than a blank screen. I tried tihs a few more times and got the right half (the messages) on occasion but never the whole web page.

WIN 8.1 and MICROSOFT LIFECAM HD-3000 compatibilty - Preview screen "blacked-out"

It seems that there are hundreds of Users with Webcam issues since WIN 8.1 has been downloaded. I have trawled sites and Forums for procedures to ensure that my LIFECAM HD-3000 will work otherwise it a waste of £14.99. No solution has worked. Drivers and
software have been re-loaded from official MS site, and/or Safe Starts undertaken, and/or uninstalling and then re-installing and nothing works.
I think that the problem is that the CAMERA APP built-in with WINS 8 or 8.1 is "always on" in the background and stops other programs/programmes using the webcam output. Is one definitive answer to get webcams working in WINS8.1. Even the MANYCAM
software fails to work with WIN8.1.
Help. Thank you.

Hi,
This could be driver issue. Please contact the manufacturer to ask for the latest driver for your Webcam in Windows 8.1, and reinstall it to check the results. If there is not, we need wait for the updates from manufacturer.
Meanwhile, to use webcam, we need to get it properly set.
Set Windows 8.1 Apps that May Use the Webcam, Microphone & other devices
http://www.7tutorials.com/set-windows-81-apps-may-use-webcam-microphone-other-devices
This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore,
Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you
completely understand the risk before retrieving any software from the Internet.
Hope these could be helpful.
Kate Li
TechNet Community Support

Windows 7 on Bootcamp I am locked into a DOS screen and it is not installing. I have been on line with Apple and microsoft and they can't help. I have lated versions of Lion and bootcamp. HELP

I ran bootcamp and tried to install Windows 7. I end up with a DOS screen and an unresponsive keyboard.
I have been on line with Apple and microsoft and they can't help. I have lated versions of Lion and bootcamp. HELP!
My Lion is up to date.
I used the 64-bit windows disc.
Should I try parallels?

Do you have a DOS screen with a command prompt or just a blank screen?
Is your Windows 7 x64 an original MS Full Version Installation DVD?
Did Windows 7 Install Disc start?
If it did you would have had to choose the location of where to install Windows 7.
Did you select the Partition named BOOTCAMP that corresponded to the Partition Size you created in BootCamp?
Were you asked to format the Partition?
Did you format the partition to NTFS and then get an option to click NEXT and actually start the Windows 7 installation?
Do you have a wired USB keyboard and wired USB mouse?
If you actual went through the installation and restarted then here are some things to try:
First try doing a CONTROL-ALT-DELETE and see if a Windows Option Screen appears.
If you get the Screen you will have some options displayed.
You want to highlight and click TASK MANAGER which should be the bottom choice I beleive.
If Task Manager runs you will get a window showing all the processes running.
See if you can find EXPLORER.
If EXPLORER is running highlight it and go to the bottom right and click the END TASK button.
Now go to the Top Left Menu Bar.
Click FILE
In the sub menu that opens select RUN or RUN NEW TASK (Not sure which it is in Windoes 7 as I am running Windows 8)
Once RUN is selected a new window will open to CREATE NEW TASK
Type in EXPLORER and then the OK button.
If Windows 7 installed properly the Desktop should appear after a bit of time.
Your first concern is to get your keyboard running so you may have to remove and reinstall Windows using Boot Camp on the Mac Side.
Let us know how it goes..

I am using a verizon email address and microsoft office for mac outlook program to manage my emails. Does any one know if the apple outlook version offers the ability to save emails as a pdf so that I can save it to my hard drive and how to access?

I am using a verizon email address and microsoft office for mac outlook program to manage my emails. Does any one know if the apple outlook version offers the ability to save emails as a pdf so that I can save it to my hard drive and how to access?

This is the Microsoft forum site that parallels what Apple has:
Office for Mac forums
It's not uncommon for MS employees who work with the Mac side of the business to help there. All in all a useful resource for Office:Mac

HT201070 I currently use OS 10.6.8 and Aperture 3, and just got a Nikon D600. It seems the the RAW Compatibility updates (4.01) are for use only with OS 10.7.5 or later, is that right? Do I need to update my whole OS to use this camera? Thank you!

I currently use OS 10.6.8 and Aperture 3, and just got a Nikon D600. It seems the the RAW Compatibility updates (4.01) are for use only with OS 10.7.5 or later, is that right? Do I need to update my whole OS to use this camera? Thank you!

Thanks to Bobthefisherman & Turbostar. Turns out I've got a corrupted disk (which I found out via "verify disk" on Disk Utility First Aid. Previously, I never thought to verify disk -- only to repair permissions -- so I never knew my HD had been corrupted.
Wasn't able to do a clean install of OSX10.6 because my SuperDrive only sporadically will load discs, so I am taking it to the Apple Store to see if they can do a clean install, and depending upon costs, get the Superdrive replaced.
The HD wasn't partioned by the way. And I did have just over 40GB of contiguous space.
Thanks again.

How do I remove Aperture trial and go back to iPhoto (be kind, I'm new).

How do I remove the Aperture trial and go back to iPhoto. For my usage (just iPhone pics/movies) iPhoto is okay for me, but now I cannot figure out how to remove Aperture, when I drag to Trash I get a warning that Aperture is a system file.
Please help, but also, please go slow if you can help, I am new to my Mac.

Should be pretty easy as follows:
1 - Make sure you have copies of any pictures you want that are inside Aperture somewhere on your computer.
2 - Quit Aperture > Remove any Aperture icon from dock > drag the Aperture program (lens icon) from Applications folder to the Trash > proceed through any warning dialog (including entering password as required) to complete the process.
Note - new security features in OS X Lion may present those warning dialogs to prevent accidental deletion of Apple programs.
3 - Hold down the 'Option' key and use the 'Go' menu in menu bar and select the 'Library' option.
4 - In the Library folder, open the 'Application Support' folder and delete any Aperture folder found.
5 - While still in the Library folder, open the 'Preferences' folder and delete both the 'com.apple.Aperture.plist' and 'com.apple.Aperture.plist.lockfile' file.
6 - While still in the Library folder, open the 'Caches' folder and delete the 'com.apple.Aperture' folder.
7 - Go the your 'Pictures' folder and drag the 'Aperture Library' (may be named Aperture Trial Library or similar) to the Trash to delete it as well.
8 - Empty the Finder Trash to remove Aperture.
Note - there are some files and Aperture folders in the '/Library' folder (which is in the root of your system drive), but you don't really need to remove those. Since you are a beginner, it is probably better not to for now.
That should do it.
Additional edit: There are two Library folders I am referring to. The first is the one in your user account 'Home' folder which is the one you are going to by using the 'Go' menu. This is the one you are deleting files from in the steps listed. The second Library folder is the one in the root of your system drive and is not typically a location for beginners to work with (thus the final note above). Hope that is clear enough.
Message was edited by: CorkyO2 to add clarity concerning the 'Library' folder.

Aperture 2 and 3 and Snow Leopard

My system with Aperture 2 was perfect.
Then I believe that Snow Leopard killed Aperture 2.
When I first installed Snow Leopard my machine felt like new again but slowly and slowly over the last few months the whole system seems to feel less and less snappy.
I don't use many video-intensive applications - my main one is Aperture 2, so this is where I find my main cause for concern.
Painfully slow adjustments with lagging, beach-balling, CPU-hogging, and RAM theft.
The main culprits seem to be Highlights/Shadows, Straighten, Crop, and Retouching… although my open mind says that could simply be because they form the latter part of my tweaking process.
There seems to be a thumbnail generation issue. Every adjustment that is made generates a new thumbnail - as you work through your tweaks that process seems to get backed up and slow everything down.
There seems to also be a video issue. Tweaking horizontal photos in full screen causes twice as much lag as a vertical image. Why? Take a look - it's obvious - in full screen edit a vertical image is about half the size of a horizontal one.
There seems to be a memory issue. Aperture seems to use a large amount of processor and RAM and sometimes doesn't let go of it or it gets caught in some kind of a loop. I've no idea what I'm talking about here. All I know is when I look at Activity Monitor the numbers are going through the roof and I can barely concentrate on them because of the noise from my fans.
There have been various and quite diverse suggestions on this and other forums as to what the underlying problem is and I have done my best to look into those and see what can help.
I have an early-2008 MBP 4,1 - 2.6 Intel Core 2 Duo - 4GB (factory-fitted) RAM - GeForce 8600M (512MB) GT.
I have done everything possible: all software totally up-to-date, re-installed combo updates, rebuilt Aperture libraries, run consistency checks, fresh Aperture install, fresh Snow Leopard install, repaired permissions, booted in 32bit, booted in 64bit, run hardware tests, deleted plists, cleared caches, downloaded and run applications like Onyx and Snow Leopard Cache Cleaner (amongst others) to ensure everything is in ship-shape along with various test applications to gauge if components like my hard drive are dying.
I keep my system clean and tidy. I have now stripped out bloat. I even took out iPhoto in case its 'iLife' browser link to Aperture was an issue. I have 85GB free on a 200GB. All components are original as factory-fitted by Apple.
Everything that any seemingly intelligent person on any decent forum has suggested has been done - in particular I thank the many users here on the Apple forum for all their information sharing… I try to read them all.
From what I see on the forums, I am not alone.
Nothing has fixed this problem.
I (and no doubt many others) have fed this information back to Apple.
Aperture 2 and/or Snow Leopard has a problem that has not been fixed.
Aperture 3 got released and I trialled it and swiftly uninstalled it because the exact same problems are there - even with one single photo in it.
My concern is that Apple will not fix the cause of the problem which seems to lie outside of Aperture.
If Apple concentrate on making Aperture 3 work better inside a possibly shaky Snow Leopard then I will be very disappointed.
I'm not forking out for a new version of software just because Apple broke my current software. Don't get me wrong - I do actually WANT to buy Aperture 3 because it has functional improvements and advancements that I would love to be using providing it works properly - and for me (and it appears for 'quite a few' others as well) it just simply doesn't… and neither does Aperture 2 any more.
I am no technical expert (as you've probably noted already) but a MAJOR bug seems to lie in the relationship between Snow Leopard, graphics cards, and the way it handles memory - and so in turn graphically-intensive applications like Aperture are high-lighting these problems more than others.
I am sure there are people without these problems. Perhaps these problems relate to specific hardware configurations. My configuration is Apple standard. I really shouldn't have these problems.
Until Apple fix this major bug I cannot remotely consider Aperture 3.
Until Apple fix this major bug I could never buy Apple again.
Up until Snow Leopard you had a VERY happy camper. I had a perfect machine and I was shouting Mac from the rooftops to anyone that would listen.
And then it seems Snow Leopard broke my machine.
What a shame.
I really want to use Apple, I actually really like Snow Leopard, I really want to use Aperture, I really want to carry on telling people how wonderful the Apple Mac experience is (or was...) but Apple are currently making it very difficult for me to continue doing so.
Please fix Snow Leopard.
This will hopefully fix Aperture 2 and Aperture 3.
Unless anyone else has a fix?
Sincere apologies to all for banging on for so long !!

Thanks for your input setwart.
When I make adjustments I do want Aperture to provide me with a new version so that I can see the original image and also that I have a version which I have already adjusted. I've previously tried changing that preference before with no improvement in performance unfortunately, but it's not really what I was referring to.
Versions, thumbnails and previews were very confusing terms to me for a while… actually, in some ways, they still are but my understanding is 'a little' better now.
That said, I probably used the wrong term.
What I meant was that every time you make an adjustment Aperture seems to produce a 'record' or 'snap-shot' of your image including that latest adjustment. In so doing you have an entire history of each adjustment you have made. In my head I picture this like a movie film-strip with each frame differing slightly. You increase your saturation by a single point? Another snap-shot. Fancy another single point on your saturation? Another snap-shot… and so on.
It is typical that I will make a bare minimum of 20 adjustments on each image, and that's before even thinking about straightening, cropping, and retouching… and then maybe I'll go back and tweak everything again !!
Somehow, my system is having difficulty in keeping up to speed with all of those snap-shots of individual adjustments. Certain adjustments will drastically slow things down more than others, and then I get to play with the beach-balls.
But - it used to handle these things just fine and that's what I'm trying to get back to.
Thanks again for getting involved.

I kept a dual boot of windows 7 and mac os x lion in macbook pro. so, should i keep antivirus for windows 7? which is prescribable between bit defender(bd) and microsoft security essentials(mse)?does bd and mse un-installs easily?

i kept a dual boot of windows 7 and mac os x lion in macbook pro. so, should i keep antivirus for windows 7? which is prescribable between bit defender(bd) and microsoft security essentials(mse)?does bd and mse un-installs easily?

lower your font size unless you have difficulty
MS Security Essentials is excellent
Then again maybe time to investigate Windows 8 RP (which uses Defender)

Integration of sap R/3 (4.7) and Microsoft active directory (2003)

Hi All,
I would like to know integration of sap R/3 (4.7) and Microsoft active directory (2003) and also SAP EP and Microsoft active directory. I have been working as a ep consultant with a local bank. I am new for this integration work, So please kindly provide me the steps for integrating these both directories.
Pls help me with this issue.
Thanks in advance,
Regards,
Raghav.

Hi,
First You should read:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bc72b890-0201-0010-3a8d-e31e3e266893
Regards,
Jarek

Stitching: Aperture 3 and Microsoft ICE

Similar Messages

Maybe you are looking for