STMS change request release problem

Hi
I am not able to release change requests, sab task able to release, but problem in main request, when I press , release directly, on the bottom it shows u2026tp successfully connected / check writeability of buffers finished with return cod 0. Then screen hangs u2026 manually I have to stop the transition.
I have configured STMS 4,5 times but same problem, in SM59 all retaliated RFCs working fine.
Our System is ERP 6.0, HPUX with DB2
Kindly give me a solution.
But in Tcode STMS >>Monitor>>TMS Alerts>>TMS Alert viewer showers following error:
Date       Time       User           Function      Message                                            System   Clt
23.05.10   17:29:07   TMSADM         TMS_TS_GET_TRLIST    NO_LOG                SID      000
23.05.10   16:58:25   TMSADM         TMS_PS_READ_PROFILE_FROM_DISK                               READ_PROFILE_FAILED                                            SID      000
23.05.10   16:57:30   TMSADM         TMS_PS_READ_PROFILE_FROM_DISK                                 READ_PROFILE_FAILED                                            SID      000
23.05.10   15:55:59   TMSADM         TMS_TP_MAINTAIN_BUFFER                                        RFC_SYSTEM_FAILURE                                             SID      200
23.05.10   15:05:36   TMSADM         TMS_TS_GET_TRLIST                                             NO_LOG                                                         SID     000
23.05.10   15:01:29   TMSADM         TMS_TS_GET_TRLIST                                             NO_LOG                                                         SID     000
23.05.10   14:53:00   TMSADM         TMS_TS_GET_TRLIST                                             NO_LOG                                                         SID    000
23.05.10   14:51:38   TMSADM         TMS_TS_GET_TRLIST                                             NO_LOG                                                         SID      000
Regards
Sunny

Hi Sunny,
Its hard to tell what might be the problem.
I would recommend that you:
- update kernel to the latest patch level for your release
- update your transport tools, tp and R3trans to the latest available for your release
- go into STMS - system pverview and do the 3 checks: Connection test, transport directory, transport tool
check if they all pass.
- try to release a transport and then if it still freezes after all of the above, stop it and check the system log, trans.log, the latest logs in usr/sap/trans/tmp and usr/sap/trans/log to see what was the action it was doing before it froze. That will give a clue as to where the issue may be.
regards,
Paul

Similar Messages

  • Change request released & but not visible

    Hi kaushal & all,
    Customizing change request is released from development system & data file & co-files are not generated which inturn i can't manage to
    see the request in queue.Also log is not visible for the released request.

    Hi,
    Customizing change request is released from development system & data file & co-files are not generated
    For the above reason only two possibilities if STMS configuration is proper.
    - Request is local request
    - No target system is define in released request.
    in your development system run se01 -> in display tab enter request -> press enter.
    double click on request -> select properties tab -> make sure target system indicate your QAS system.
    regards,
    kaushal

  • A problem about change request release se10,urgent!

    hello,everyone,
    when I use tcode se10 to release my change requestno,
    an error occured:
    'test call of transport control program (tp) ended with return code 0232',what it mean?who knows?
    pls give me help,.thanks very much.

    Hi Niuniu,
    Try this to vaoid the problem.
    On Transport Domain Controller:
    - goto /nSTMS
    - Overview -> Systems
    - Click client then select u2018SAP Systemu2019 -> Update Configuration (Ctrl+F2)
    - Extras -> Generate RFC Destinations
    - Repeat this for Controller instance itself ! ! !
    On Domain Clients:
    - goto /nSTMS
    - Overview -> Systems
    - Client its instance (eg DEV) then u2018SAP Systemu2019 -> Update Configuration (Ctrl+F2)
    - Extras -> Generate RFC Destinations
    Dont forget to reward points if found useful.
    Thanks,
    Satyesh

  • Local change request

    hi
    i released local change request in my development server .but it is not showing request number in queue any another place. i want that local change request released request in quality server queue
    is there a way to modification in released request .
    any possible to the released request get back to original place.
    pls give me solution

    Local change request will not create any request files (data/cofiles), you can create another request manually and add the object of the local request. SE09 --> create request --> select type of request (customization or workbench) --> type des and create new request.
    expand the newly created request and select include objects --> and the appropriate request.
    alternative is do minor changes in the program and it will popup you for new changes reuqest.
    cheers,
    -Sunil

  • Unable to release the change request from se01

    HI All,
    Recently i had applied Rsecnotes as per sap recommendation in EWA Report and I implemented successfully in DEV System. But, When i try to release the change requests from SE01 in (DEV System)
    it is giving the error message "Object Func<objectname> is inactive". I have unlocked all the request and checked but still problem exsist.
    Please help me to release the request and implement in the landscape.
    Thanks,
    Rajesh N

    Hi,
    Activate the object using se03 and then relaese the request
    thanks

  • Solution Manager 3.2 SP 8- Change Request Management Configuration Problem

    Hi friends,
    We are in process of implementing SOLMAN 3.2 SP8 in our landscape.I am facing  problem in configuring change request management.
    When the developer is working on an urgent correction document we are facing a problem.The steps we are following are here under provided.
    Step 1 :
    Selected Action "In development" - > it created the transport request in the dev system.
    Step 2:
    Action "Log into System" -> made correction attached to the transport request manually and released the task.
    Step 3:
    Action "Release transport requests" -> The transport request in the development was released.
    Step 4:
    Went for action "Pass to correction" -> I am facing exceptions which conveys
    Status was reset by system
    A condition is not satisfied because of an exceptional situation
    Not all transport requests yet released
    And we would be thankful if you provide the authorization required for the different roles in the change request management.I have followed the help file of SOLMAN 3.2 and create the users as under
    User - Role
    SOCM_RQSTR - ZSAP_SOCM_REQUESTER
    (Derrived from SAP_SOCM_REQUESTER)
    SOCM_DVLPR - ZSAP_SOCM_DEVELOPER
    (Derrived from SAP_SOCM_DEVELOPER)
    SOCM_CHNGNGR - ZSAP_SOCM_CHANGE_MANAGER
    (Derrived from SAP_SOCM_CHANGE_MANAGER)
    SOCM_CHNGNGR - ZSAP_SOCM_IT_OPERATOR
    (Derrived from SAP_SOCM_IT_OPERATOR)
    Even then I am facing problems while developer creating transport requests and while logging into development system.
    I tried adding S_RFC,S_RFCACL auth objects to their roles but did not help.
    Pl. suggest.
    Thanks & Regards
    Mrutyunjay
    Message was edited by: Mrutyunjay Rao Dora

    Hi all,
    We are trying to implement the Change Request Management piece in Solution Manager 3.2. 
    We are facing the following issues which I think relate to the same reason:
    1)We have created a Maintenance Project in SOLAR_PROJECT_ADMIN and assigned it a logical component, which consists of our two system landscape (namely DEVàQAS). We have also created the IMG project in the DEV system and have distributed that IMG project to both the Solution manager system and the DEV system. Now we have to make the maintenance cycle and task list for that maintenance project, but as we select the project and click on “create project cycle” it shows the message "The project is not released. Hence cycle can not be created". It is showing the status of project as locked .How can we open or unlock the project to remove the error?
    2) Also after selecting the SMI project when we click on the button “CTS status switches” or “project specific Transport route” it responds with the error "Project landscape not configured; set the project status to "open" first ".
    3)When we click on “synchronize single project” it prompts for the login of connected system (Development System) and after login, it gives an error "Warning, problems during synchronization of the system Landscape".
    For Error resolution, we have checked the system landscape and it does not give us any errors. We have done that, both from the solution manager by going to the transaction SOLAR_PROJECT_ADMIN -->  >system landscape tab>selecting our logical component and doing a check by clicking the "Check system Landscape" button. It returns with "no Errors". We also did a check on the TMS configuration by logging directly on to the TMS domain controller system and checking the Transport routes. We have checked the RFC connections without any errors.
    Any help would be greatly appreciated.
    Thanks
    Abhi

  • Released Change Requests have changed status to modifiable

    Hi all,
    something very rare happend some days ago in my development R/3 client.  Every released change request appear as modifiable, i mean, all the change requests that have been released before a specific day (eg. 14 Setiembre) now appear as modifiable.
    The tasks that these change requests contain maintain the correct status (released) but the father change request appear as modifiable.
    SAP says something about avoiding import requests(scc1) when other requests are been released.  I didn't got it.
    Now we need a secure way to correct the status of these requests.  Can you help me please.
    REgards,
    Christian

    From my scant knowledge I would recommend reading about SE03 to verify system settings (not modifiable, etc.) and be looking at SCC4 for checking the changeable status for applicable client.  You should be checking STMS and its documentation very carefully.<a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/frameset.htm">Transport Management System</a>
    I am sure other Gurus can help, but I remember reading documentation for these transactions as well as SE95 (Modification Assistant).
    Please post these kind of questions in the appropriate forum, by the way.
    Thanks,
    Marilyn

  • Release local change request

    Dear all,
    I would like to back up some of my change requests. But when release them, they are not available in transport directory of this system. Do you know how to resolve this problem ?
    Thank you very much,
    Sylvecat

    Hi,
    Go to SE10.
    Select the released Check Button
    You will get it.
    Regards
    Sandipan

  • Change the  description of the change request number" in SE10 after release

    Hi All
    Is there way to change the
    "description of the change request number" in SE10
    after releasing the change request number?
    appreciate your feedback
    Thanks you
    Iver

    Hello
    I do not know a way to do it in se10 but a simple program could do the trick.
    Include the following code in your program.
    update e07t set as4text = 'your new description'
          where trkorr = your_cr and langu = 'E'.
    Of course you will have to wrestle with the 'moral issue' of directly updating SAP delivered tables
    Regards
    Greg Kern.

  • How to release the Change request (Task in Repair Mode)

    Hello everybody,
    I have change request in that one Task in Repair mode.
    when i trying to release, it give the error message like
    Repair HRDK900911 may only contain repaired objects
    Diagnosis
    In repairs, you can only lock and edit those objects whose original exists in another SAP System.
    The object R3TR PROG /VWK/GPS_VCD_R was found in the object list of your repair HRDK900911. This object is not a copy but the original.
    So please suggest me
    How to release the Task (Repair) so I can release  the request.
    Thanks

    Yes you wont be able to release the request till you remove the flag from SE03.
    Goto SE03 > Display Repaired Objects
    Select Your object and remove the repair flag from top <Repair Flag>
    R3TR PROG <Your Object>
    Also as you are getting an error
    No valid change license available for namespace
    In SE03-->Display/change Namespace
    when I check the specified Namespace then their is no Repair License.
    So please suggest me Repair License is required?
    check what namespace it is refrerring to ... A namespace name should be there....
    1. Go to SE06 and click on the System Change Option.
    2. Verify that Namespace Systems Development  /Namespace/  is "Modifiable".
    or
    1. Run transaction SM30
    2. Enter V_TRNSPACE
    2. Click Maintain
    3. Double Click on Namespace /NAMESPACE/
    4. Change Namespace role from P to C, then hit Save
    All the best !
    Edited by: prateek_y on Aug 30, 2010 3:21 PM

  • Release change request. It remains in pending

    Hi all,
    when I try to release directly a change request from my development system it started but it remains in pending with the following message "tp successfully connected". In the process of the operating system (W2000) it is present but it does not work.
    If I stop the transaction after long time, the process is still present in the list of active process.
    This is my SAP release:
    SAP R3 Enterprise 470x200 on Windows 2000 server - DB Oracle 9.2.0.6.0
    Kernel 640 not unicode patch level 101
    Could you please help me??
    Thanks in advanced
    Moreno

    have a look into directory
       \usr\sap\trans\tmp
    and additionaly to the latest
       \usr\sap\trans\log\SLOG*
    file.
    specially the 2nd file should normaly tell you more.
    regards
    Peter

  • Authorized Status problem in change Request

    Hi All,
    when a correction is completed/withdrawn, generally the change request status changes to Implemented/new and we used to confirm the realization.
    The Problem is due to some missing configuration(in status attribuites), this was not done before and tickets were created and authorized.
    now after the necassary configuration being done, For the open corrections it is changing to implemented. but for already completed corrections the status is still Authorized only.
    It is always getting displayed in the report as not completed ones.
    Kindly guide on how can we close this change requestswith status authorized and whose corrections are completed already.
    Regards,
    Subhashini.

    Hi Subhashini.
    I am running in to the same problem....
    The Problem is due to some missing configuration(in status attribuites), this was not done before and tickets were created and authorized.
    Could you please tell me what changes you did to resolve the issue ?
    Please see the active thread:
    [Re: Controlling ACTION in ChaRM|Re: Controlling ACTION in ChaRM]
    Regards.
    Rajesh Narkhede

  • Released the Transport Request which is in Local Change Request

    Hi,
            Actually without knowing I have released  transport requests which are  under Local Change Request.Due to this they are not available for importing in Quality system.My  Package is also there in one of those Requests.Now please guide me how to recover these requests.
    Regards
    Karthik

    Hello Karthik
    The easiest way should be to copy the object list of your local request to a new (transportable) workbench request.
    However, the system might tell you that your objects can only be put into a local request.
    In this case you need to find out why your objects are not (yet) transportable.
    Usually there are two reasons for local request:
    1.) The request does not have a target system -> check the request header and enter the correct target system (if possible)
    2.) Your package has an inappropriate transport layer assigned -> change the transport layer
    Regards
      Uwe

  • Ifference between change request and release request and transport request

    what is the difference between change request and release request and transport request and customization  request?

    Please refer to this link :
    http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
    Regards,
    Praveen
    Pl reward if helpful

  • STMS change systems in the request

    Hello,
    Due a administration process, I have in the Development systems transport request released with the wrong target systems.
    Of course I need import the released request to the correct target system, how i can do this?
    Because is not posible change the target systems in released requests.
    Any idea to transport the request to the correct target systems?
    thanks in advance
    Javier

    Hello,
    I have  a pretty simple solution provided both the incorrect target and correct target systems are included in the same TMS i.e are having same TMS domain. I am also assuming that the transports have not been imported into incorrect target system.
    In this scenario go to the import queue of the incorrect target system (using STMS_IMPORT). Select the block of transport requests which need to be moved to correct target. This can be done from menu using EDIT-->SELECT BLOCK.
    After this from menu choose Request>Forward>System. Give the correct target system and then these transports will also get forwarded to import buffer of correct target.
    If however the transports have been imported in incorrect target system then you need to go import history and then there again do a block selection and then forward those teansport .
    Using this you can do an enmass forwarding in one single go.
    Using the option Extras>Other Requests>Add you can add only 1 transport at a given point of time unless of course you use CATT like I do.
    Regards.
    Ruchit Khushu.

Maybe you are looking for