STMS configuration Activation error
I just did client copy, and trying to configure this single system. After I set the rout, and try to distribute and activate it, It gives me program error
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"TRINT_CLEAR_FOR_DBCOPY" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
Also, at check transport tool, it shows DB connect error: Error:SAP-System not installed properly. Error: EXIT(16)
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
ERRORS: Highest tp internal error was: 0233
Output from tools called by tp:
Please help on this one. Thanks a lot.
Amy
Here is the content of the file. Thanks.
START EXPORT PREPARATION SB1 e 20070925170031 AMAO reuben
START tp_getprots SB1 E 20070925170031 AMAO reuben
STOP tp_getprots SB1 E 20070925170041 AMAO reuben
STOP EXPORT PREPARATION SB1 e 20070925170041 AMAO reuben
START EXPORT PREPARATION SB1 e 20070925170545 AMAO reuben
START tp_getprots SB1 E 20070925170545 AMAO reuben
STOP tp_getprots SB1 E 20070925170555 AMAO reuben
STOP EXPORT PREPARATION SB1 e 20070925170555 AMAO reuben
HALT 20070927141002
ERROR: SAP-System not installed properly. Systems name (SB1) is different from name in TADIR (AP1)
ERROR: EXIT(16) -> process ID is: 1339486
HALT 20070927141002
ERROR: SAP-System not installed properly. Systems name (SB1) is different from name in TADIR (AP1)
ERROR: EXIT(16) -> process ID is: 1425590
HALT 20070927142625
ERROR: SAP-System not installed properly. Systems name (SB1) is different from name in TADIR (AP1)
ERROR: EXIT(16) -> process ID is: 1450052
HALT 20070927142625
ERROR: SAP-System not installed properly. Systems name (SB1) is different from name in TADIR (AP1)
ERROR: EXIT(16) -> process ID is: 1339582
HALT 20070927150158
ERROR: SAP-System not installed properly. Systems name (SB1) is different from name in TADIR (AP1)
ERROR: EXIT(16) -> process ID is: 1437916
HALT 20070927150158
ERROR: SAP-System not installed properly. Systems name (SB1) is different from name in TADIR (AP1)
ERROR: EXIT(16) -> process ID is: 1376366
HALT 20070927150315
ERROR: SAP-System not installed properly. Systems name (SB1) is different from name in TADIR (AP1)
ERROR: EXIT(16) -> process ID is: 1327126
HALT 20070927150315
ERROR: SAP-System not installed properly. Systems name (SB1) is different from name in TADIR (AP1)
ERROR: EXIT(16) -> process ID is: 1294584
HALT 20070927163616
ERROR: SAP-System not installed properly. Systems name (SB1) is different from name in TADIR (AP1)
ERROR: EXIT(16) -> process ID is: 1413342
ERROR: Connect to SB1 failed (20070927164237, probably wrong environment).
ERROR: Connect to SB1 failed (20070927164554, probably wrong environment).
Similar Messages
-
Error during STMS configuration
I had perform a system copy with different system ID from the source system successfully. I encounter some problem during the STMS configuration. I already set all the configuration for the target system but when I tried to transport one configuration from one client to another, it prompts out error as below:
Transport control program tp ended with error code 0247
Errors: addtobuffer has problems with data- and/or cofile
However, when I check back the source system, there are no such problem even without the 2 files above.Swiber SAP wrote:
If I did not use the same name as the source system database, the transport number will begin with the new system ID. Is there way where I can import the transport number from the source system to the target system?
In normal practice, SID of development, quality and production system's SID's are different, and we do the transport between these systems. So, answer of your question is you can do the transport if SID is different.
My question to you are :
Have you reconfigured STMS after system refresh ? What is role of the system that is created after system copy ? What is transport route of your systems in which are doing transport ?
Thanks
Sunny -
STMS Configuration in Distributed environment
Hello ,
Is there any extra efforts involved to configure STMS in Distributed Installation (i.e ABAP CI reside on Host A & ABAP DB redide on Host B)?
In my case DEV , QA & PRD ( CI & DB ) instalaled on indivisual servers.
In STMS configuration there is no issue with DEV & QA System while distributing the STMS.
But when I distribute & try to activate the PRD System the error :
a)RFC error :
======> CPIC-CALL: 'CMACCP : rc=20
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 'prddbhost:3301' not reached
b)RFC :CALLTP_Linux also failed to connect the system
Where in DEV & QA System the RFC "CALLTP_Linux" has no issue.
The PRD CI & DB is a HA ( active - active )
Regards,
Santopsh KaradkarIn addtion :
If I move CI & DB on single host then the issue get`s resolved.
It means STMS / RFC works fine with ( active - passive scenario where it fails in active - active scenario ) -
ADS - SFP Forms Activation Error
Dear @all, I have an activation Error in SFP for Z FORMS. ADS is configured and all configuration checks working fine:
checked: Hinweis 944221 - Fehleranalyse bei Problemen in der Formularprozessierung
checked with repords:
FP_CHECK_DESTINATION_SERVICE
FP_TEST_IA_01
FP_PDF_TEST_00
FP_TEST_00the exeption is:
#1.5^H#0015C5FEC1F3005000000EC1000060AE000483A5CC36C696#1270648025826#com.adobe.ads.request.ADSRequest#com.adobe/AdobeDocumentServices#com.adobe.ads.request.ADSRequest#SAPSUPPORT2#22098#SAP J2EE Engine JTA
Transaction : [12465520176ffffff93]
#icosap14.implico.de_W40_19162450#ADSUSER#0ad7d10a424c11dfa5100015c5fec1f3#SAPEngine_Application_Thread[impl:3]
_33##0#0#Error#1#/System/Server#Plain###Processing exception during
a "CalculateFieldHashes" operation.
Request start time: Wed Apr 07 15:47:04 CEST 2010
com.adobe.ProcessingException: com.adobe.ProcessingException: Class not
found exception while loading class SAPForm,
classpath: /usr/sap/W40/DVEBMGS01/exe/jstartup.jar:/usr/sap/W40/DVEBMGS01/exe/jvmx.jar:./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin/system/bytecode.jar:.
Exception Stack Trace:
com.adobe.ProcessingException: com.adobe.ProcessingException: Class not
found exception while loading class SAPForm,
classpath: /usr/sap/W40/DVEBMGS01/exe/jstartup.jar:/usr/sap/W40/DVEBMGS01/exe/jvmx.jar:./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin/system/bytecode.jar:.
at com.adobe.ads.request.ADSRequest.processOperations(Unknown
Source)
at com.adobe.ads.request.ADSRequest.process(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown
Source)
at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke
(NativeMethodAccessorImpl.java:85)
at sun.reflect.NativeMethodAccessorImpl.invoke
(NativeMethodAccessorImpl.java:58)
at sun.reflect.DelegatingMethodAccessorImpl.invoke
(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at
com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
at
com.sap.engine.services.webservices.runtime.RuntimeProcessor.process
(RuntimeProcessor.java:157)
at
com.sap.engine.services.webservices.runtime.RuntimeProcessor.process
(RuntimeProcessor.java:79)
at
com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
at SoapServlet.doPost(SoapServlet.java:51)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet
(HttpHandlerImpl.java:401)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
(RequestAnalizer.java:386)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
(RequestAnalizer.java:364)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.handle
(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle
(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request
(Processor.java:175)
at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run
(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java:37)
at java.security.AccessController.doPrivileged
(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java:176)
Caused by: com.adobe.ProcessingException: Class not found exception
while loading class SAPForm,
classpath: /usr/sap/W40/DVEBMGS01/exe/jstartup.jar:/usr/sap/W40/DVEBMGS01/exe/jvmx.jar:./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin/system/bytecode.jar:.
at com.adobe.ads.operation.CalculateFieldHashes.execute(Unknown
Source)
at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
... 31 more
Caused by: java.lang.ClassNotFoundException:
com.adobe.service.sap.licensing.SAPForm^M
Found in negative cache^M
Loader Info -
^M
ClassLoader name: [ejbGencom.adobe/AdobeDocumentServices]^M
Parent loader name: [com.adobe/AdobeDocumentServices]^M
References:^M
service:ejb^M
common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:signature_lib;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore^M
interface:resourcecontext_api^M
interface:resourceset_api^M
interface:transactionext^M
interface:security^M
interface:cross^M
library:opensql^M -
STMS configuration windows and unix
Dear guru,
We had a two system landscape.Dev system in windows and prd system in unix.
We are configuring the STMS . We take domain controller in prd system.The common transport Directory in Prd system that will map to dev system .There is a error messge, the dev system cannot access the bin(profiles) and .cfg files.
Kindly provide the solution.
regards
gunaYes I created a samba/CIFS.
The security levels is share .I created a same user in windows system with permisson <sid>adm user privilages.
In the Unix system acess is working fine.but windows the file system is not acess by the TMSadm user.
when the stms configuration the profile file will be access by the tmsadm and write in the profiles (/bin).that process not done by the windows server.
guna -
Hi Guys...........
We have installed EHP 4 SP 5 and configured STMS for 2 system landscape taking one system as virtual.But our function consultants are having issues when uploading Master data.they say that Transport Requests are being generated (actually they shud not be generated ).
I have checked all client settings and system settings.
Is there any different STMS configuration needed for EHP 4 ???????
Please any one suggest....
Regards,
sandhya.In addtion :
If I move CI & DB on single host then the issue get`s resolved.
It means STMS / RFC works fine with ( active - passive scenario where it fails in active - active scenario ) -
Locked Out of Mail - Suspicious Activity Error!!!!...
Locked out from sending any email ... !!!!!
No idea what this error message means and as for suspicious activity, they could have chosen a more intuitive - explanatory error message.
This is really irritating, has anybody else experienced this??
Attachments:
Suspicious Activity Error.jpg 43 KBiOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
dear all,
a few years ago I installed and configured Adobe Digital Editions. I bought some ebooks as well. Meanwhile I have switched my computer. And today I discovered my ebooks. I clicked on them and the system tells me that I have to install ADE and to activate the computer. So I successfully downloaded ADE installed it and activeated it.
ADE immediately shows me all the books I bought years ago. Then I clicked on the books I wanted to read. A window popped up which told me that the book is no more available - due to a changed path. I found no possibility to change an existing ADE configuration.
I opened ADE and added a book I bought by opening the option to add a file and openend the ebook on its new location. The ebook was loaded, authorized and I could read it. Clever - I thought. Thats the way to clean up my library. First lets delete all the ebooks in the library with the broken location. Afterwards lets add it via the option to add ebooks. Thats what I did. I deleted all the ebooks first. Afterwards I wanted to add all the books like I already did it with the first one. But - I no more could do that!
This is what I get:
Your Adobe software could not be activated. HTTP error on Adobe DRM Activator request. Adobe DRM Activator error (client code 31); HTTP code 404. Fault location: 15
Does this mean that ADE server does no more authorize my bought ebooks after I had deleted the broken-link-ones from my library?
I hope not ! - This would be awfull - all my books would be gone !!
I hope someone could follow my problem description and hope that there is a simple solution for that.
Thanks,
D.THIS FORUM SUCKS
NO RESPONSE. MY FIREWALL IS OFF, NO PROXY NO VIRUS SCAN AND DRM CRAP SPITS THIS ERROR OUT...
C___Primer_Plus.pdf:
Adobe DRM Error
System: 9
State: 4
Class: 20
Code: 31
Message:
Your Adobe software could not be activated.
HTTP error on Adobe DRM Activator request.
Adobe DRM Activator error.
Client Code: 31 - HTTP Code: 500
Fault location: 20
--- end ---
ADOBE HIGHWAY ROBBERY. -
I am getting an activation error when trying to sign in to FAceTime
I am getting an activation error when trying to sign in to FAceTime
me too after upgrading into lion..
-
0IC_C03: 2LIS_03_BF Transformation Start Routine Activation error
Hi all,
Iam getting activation error (Start Routine) while activating the transformation for the 2LIS_03_BF (Material Movements) data source for 0IC_C03 INFO CUBE. Iam getting an error for the Start Routine and the error message is as follows:
+ E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".+
Scenario: As per my client requirment i have tried to add on info object in to the existing info cube i.e., Movement Type which is an existing field in the info source and the data source and i have tried to map the same in the transformations between the info source and the info cube and activated the transformation. Then iam getting the above said start routine error, so to avoid this i have removed that object i.e., movement type from the info cube and tried to reactivate the transformations still iam getting the same routine error.
Please suggest me th approach to resolve this issue.
Regards,
PrabhakarHi Chandu,
Please find below is the routine:
PROGRAM trans_routine.
CLASS routine DEFINITION
CLASS lcl_transform DEFINITION.
PUBLIC SECTION.
Attributs
DATA:
p_check_master_data_exist
TYPE RSODSOCHECKONLY READ-ONLY,
*- Instance for getting request runtime attributs;
Available information: Refer to methods of
interface 'if_rsbk_request_admintab_view'
p_r_request
TYPE REF TO if_rsbk_request_admintab_view READ-ONLY.
PRIVATE SECTION.
TYPE-POOLS: rsd, rstr.
Rule specific types
TYPES:
BEGIN OF tys_SC_1,
InfoObject: 0STORNO Reversal Indicator.
STORNO TYPE /BI0/OISTORNO,
InfoObject: 0RT_PROMO promotion.
RT_PROMO TYPE /BI0/OIRT_PROMO,
InfoObject: 0VAL_CLASS Valuation class.
VAL_CLASS TYPE /BI0/OIVAL_CLASS,
InfoObject: 0DOC_DATE Document Date.
DOC_DATE TYPE /BI0/OIDOC_DATE,
InfoObject: 0STOCKTYPE StockType.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0STOCKCAT Stock Categories.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0PSTNG_DATE Posting date in the document.
PSTNG_DATE TYPE /BI0/OIPSTNG_DATE,
InfoObject: 0COMP_CODE Company Code.
COMP_CODE TYPE /BI0/OICOMP_CODE,
InfoObject: 0BWAPPLNM Application component.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0MOVETYPE movement Type (Inventory Management).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0STOCKRELEV BW: Relevance to Stock.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0CPPVLC BW: Purchase Value in Local currency.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0CPSVLC BW: Sales Value in Local currency.
CPSVLC TYPE /BI0/OICPSVLC,
InfoObject: 0CPSTLC BW: Sales Value in Local currency.
CPSTLC TYPE /BI0/OICPSTLC,
InfoObject: 0CPQUABU BW: Amount in base unit of Measure.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0VAL_TYPE Valuation Type.
VAL_TYPE TYPE /BI0/OIVAL_TYPE,
InfoObject: 0PROCESSKEY BW: Transaction Key.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0BATCH Batch number.
BATCH TYPE /BI0/OIBATCH,
InfoObject: 0MATMREA Reason for Goods Movement.
MATMREA TYPE /BI0/OIMATMREA,
InfoObject: 0BUS_AREA Business Area.
BUS_AREA TYPE /BI0/OIBUS_AREA,
InfoObject: 0COSTCENTER Cost Center.
COSTCENTER TYPE /BI0/OICOSTCENTER,
InfoObject: 0SOLD_TO Sold-to Party.
SOLD_TO TYPE /BI0/OISOLD_TO,
InfoObject: 0WHSE_NUM Warehouse Number / warehouse complex.
WHSE_NUM TYPE /BI0/OIWHSE_NUM,
InfoObject: 0STOR_LOC Storage Location.
STOR_LOC TYPE /BI0/OISTOR_LOC,
InfoObject: 0STRGE_BIN Storage Bin.
STRGE_BIN TYPE /BI0/OISTRGE_BIN,
InfoObject: 0STRGE_TYPE Storage Type.
STRGE_TYPE TYPE /BI0/OISTRGE_TYPE,
InfoObject: 0VENDOR Vendor.
VENDOR TYPE /BI0/OIVENDOR,
InfoObject: 0MATERIAL Material.
MATERIAL TYPE /BI0/OIMATERIAL,
InfoObject: 0DOC_NUM BW: Document Number.
DOC_NUM TYPE /BI0/OIDOC_NUM,
InfoObject: 0BASE_UOM Base Unit of Measure.
BASE_UOM TYPE /BI0/OIBASE_UOM,
InfoObject: 0DOC_YEAR BW: Document Year.
DOC_YEAR TYPE /BI0/OIDOC_YEAR,
InfoObject: 0PROFIT_CTR Profit center.
PROFIT_CTR TYPE /BI0/OIPROFIT_CTR,
InfoObject: 0DCINDIC Debit/Credit Indicator.
DCINDIC TYPE /BI0/OIDCINDIC,
InfoObject: 0LOC_CURRCY Local currency.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
InfoObject: 0PLANT Plant.
PLANT TYPE /BI0/OIPLANT,
InfoObject: 0FISCVARNT Fiscal year variant.
FISCVARNT TYPE /BI0/OIFISCVARNT,
InfoObject: 0CPNOITEMS BW: Number of activities.
CPNOITEMS TYPE /BI0/OICPNOITEMS,
InfoObject: 0CO_AREA Controlling Area.
CO_AREA TYPE /BI0/OICO_AREA,
InfoObject: 0DOC_ITEM BW: Document Line Number.
DOC_ITEM TYPE /BI0/OIDOC_ITEM,
InfoObject: 0VALUE_LC Amount in local currency.
VALUE_LC TYPE /BI0/OIVALUE_LC,
InfoObject: 0QUANT_B Quantity in base units of Measure.
QUANT_B TYPE /BI0/OIQUANT_B,
InfoObject: 0MOVE_PLANT Receiving Plant/Issuing Plant.
MOVE_PLANT TYPE /BI0/OIMOVE_PLANT,
InfoObject: 0RECORDMODE BW Delta Process: Update Mode.
RECORDMODE TYPE RODMUPDMOD,
InfoObject: 0RT_RMAPIDA RMA Physical Inventory Date.
RT_RMAPIDA TYPE /BI0/OIRT_RMAPIDA,
InfoObject: 0BWCOUNTER Additional Key Field Revaluation Document
*Record.
BWCOUNTER TYPE /BI0/OIBWCOUNTER,
InfoObject: 0INDSPECSTK Indicator: Valuation of Special stock.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0GN_R3_SSY Source System for R/3 Entity.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0RT_MOVINV movement Type is Physical Inventory.
RT_MOVINV TYPE /BI0/OIRT_MOVINV,
InfoObject: 0RT_MOVADJ movement Type is Stock Adjustment.
RT_MOVADJ TYPE /BI0/OIRT_MOVADJ,
InfoObject: 0RSL_STMAT Structured Article.
RSL_STMAT TYPE /BI0/OIRSL_STMAT,
InfoObject: 0RT_MOVRET movement Type is Return.
RT_MOVRET TYPE /BI0/OIRT_MOVRET,
InfoObject: 0RSL_STAUTO Automatically Completed Component.
RSL_STAUTO TYPE /BI0/OIRSL_STAUTO,
InfoObject: 0RT_MOVTRAN movement Type is Stock Transfer.
RT_MOVTRAN TYPE /BI0/OIRT_MOVTRAN,
InfoObject: 0RT_MATPOST Transfer Posting from Article to Article
RT_MATPOST TYPE /BI0/OIRT_MATPOST,
InfoObject: 0RT_SASTSV Share of Business Volume for Set Sales Val
*ue in Local crcy.
RT_SASTSV TYPE /BI0/OIRT_SASTSV,
InfoObject: 0RT_SASTST Share of Business Volume for Set with Tax
*in Local currency.
RT_SASTST TYPE /BI0/OIRT_SASTST,
InfoObject: 0COORDER order number.
COORDER TYPE /BI0/OICOORDER,
InfoObject: 0RMA_LNK RMA Stock Transfer Reference Item.
RMA_LNK TYPE /BI0/OIRMA_LNK,
InfoObject: 0RMA_RFLG RMA Relevance Flag.
RMA_RFLG TYPE /BI0/OIRMA_RFLG,
InfoObject: 0RTHFEES Stock Transfer Fees.
RTHFEES TYPE /BI0/OIRTHFEES,
Field: RECORD.
RECORD TYPE RSARECORD,
END OF tys_SC_1.
TYPES:
tyt_SC_1 TYPE STANDARD TABLE OF tys_SC_1
WITH NON-UNIQUE DEFAULT KEY.
$$ begin of global - insert your declaration only below this line -
... "insert your code here
$$ end of global - insert your declaration only before this line -
METHODS
start_routine
IMPORTING
request type rsrequest
datapackid type rsdatapid
EXPORTING
monitor type rstr_ty_t_monitors
CHANGING
SOURCE_PACKAGE type tyt_SC_1
RAISING
cx_rsrout_abort.
METHODS
inverse_start_routine
IMPORTING
i_th_fields_outbound TYPE rstran_t_field_inv
i_r_selset_outbound TYPE REF TO cl_rsmds_set
i_is_main_selection TYPE rs_bool
i_r_selset_outbound_complete TYPE REF TO cl_rsmds_set
i_r_universe_inbound TYPE REF TO cl_rsmds_universe
CHANGING
c_th_fields_inbound TYPE rstran_t_field_inv
c_r_selset_inbound TYPE REF TO cl_rsmds_set
c_exact TYPE rs_bool.
ENDCLASS. "routine DEFINITION
$$ begin of 2nd part global - insert your code only below this line *
TYPES:
BEGIN OF tys_SC_1_full,
InfoObject: 0STORNO Stornokennzeichen.
STORNO TYPE /BI0/OISTORNO,
InfoObject: 0RT_PROMO Aktion.
RT_PROMO TYPE /BI0/OIRT_PROMO,
InfoObject: 0VAL_CLASS Bewertungsklasse.
VAL_CLASS TYPE /BI0/OIVAL_CLASS,
InfoObject: 0DOC_DATE Belegdatum.
DOC_DATE TYPE /BI0/OIDOC_DATE,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0PSTNG_DATE Buchungsdatum im Beleg.
PSTNG_DATE TYPE /BI0/OIPSTNG_DATE,
InfoObject: 0COMP_CODE Buchungskreis.
COMP_CODE TYPE /BI0/OICOMP_CODE,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0CPSVLC BW: Verkaufswert in Hauswährung.
CPSVLC TYPE /BI0/OICPSVLC,
InfoObject: 0CPSTLC BW: VerkWmS Hauswährung.
CPSTLC TYPE /BI0/OICPSTLC,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0VAL_TYPE Bewertungsart.
VAL_TYPE TYPE /BI0/OIVAL_TYPE,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0BATCH Chargennummer.
BATCH TYPE /BI0/OIBATCH,
InfoObject: 0MATMREA Grund für die Warenbewegung.
MATMREA TYPE /BI0/OIMATMREA,
InfoObject: 0BUS_AREA Geschäftsbereich.
BUS_AREA TYPE /BI0/OIBUS_AREA,
InfoObject: 0COSTCENTER Kostenstelle.
COSTCENTER TYPE /BI0/OICOSTCENTER,
InfoObject: 0SOLD_TO Auftraggeber.
SOLD_TO TYPE /BI0/OISOLD_TO,
InfoObject: 0WHSE_NUM Lagernummer/Lagerkomplex.
WHSE_NUM TYPE /BI0/OIWHSE_NUM,
InfoObject: 0STOR_LOC Lagerort.
STOR_LOC TYPE /BI0/OISTOR_LOC,
InfoObject: 0STRGE_BIN Lagerplatz.
STRGE_BIN TYPE /BI0/OISTRGE_BIN,
InfoObject: 0STRGE_TYPE Lagertyp.
STRGE_TYPE TYPE /BI0/OISTRGE_TYPE,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
InfoObject: 0MATERIAL Material.
MATERIAL TYPE /BI0/OIMATERIAL,
InfoObject: 0DOC_NUM BW: Belegnummer.
DOC_NUM TYPE /BI0/OIDOC_NUM,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
InfoObject: 0DOC_YEAR BW: Belegjahr.
DOC_YEAR TYPE /BI0/OIDOC_YEAR,
InfoObject: 0PROFIT_CTR Profit Center.
PROFIT_CTR TYPE /BI0/OIPROFIT_CTR,
InfoObject: 0DCINDIC Soll-/Haben-Kennzeichen.
DCINDIC TYPE /BI0/OIDCINDIC,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
InfoObject: 0PLANT Werk.
PLANT TYPE /BI0/OIPLANT,
InfoObject: 0FISCVARNT Geschäftsjahresvariante.
FISCVARNT TYPE /BI0/OIFISCVARNT,
InfoObject: 0CPNOITEMS BW: Anzahl Vorgänge.
CPNOITEMS TYPE /BI0/OICPNOITEMS,
InfoObject: 0CO_AREA Kostenrechnungskreis.
CO_AREA TYPE /BI0/OICO_AREA,
InfoObject: 0DOC_ITEM BW: Belegpositionsnummer.
DOC_ITEM TYPE /BI0/OIDOC_ITEM,
InfoObject: 0VALUE_LC Betrag in Hauswährung.
VALUE_LC TYPE /BI0/OIVALUE_LC,
InfoObject: 0COORDER Auftragsnummer.
COORDER TYPE /BI0/OICOORDER,
InfoObject: 0QUANT_B Menge in Basismengeneinheiten.
QUANT_B TYPE /BI0/OIQUANT_B,
InfoObject: 0MOVE_PLANT Empfangendes/Abgebendes Werk.
MOVE_PLANT TYPE /BI0/OIMOVE_PLANT,
InfoObject: 0RECORDMODE BW Deltaverfahren: Update Modus.
RECORDMODE TYPE RODMUPDMOD,
InfoObject: 0RT_RMAPIDA RMA Inventurdatum.
RT_RMAPIDA TYPE /BI0/OIRT_RMAPIDA,
InfoObject: 0BWCOUNTER Zusätzliches Schlüsselfeld Umbewertungsbel
*egsatz.
BWCOUNTER TYPE /BI0/OIBWCOUNTER,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0RT_MOVINV Bewegungsart ist Inventur.
RT_MOVINV TYPE /BI0/OIRT_MOVINV,
InfoObject: 0RT_MOVADJ Bewegungsart ist Bestandskorrektur.
RT_MOVADJ TYPE /BI0/OIRT_MOVADJ,
InfoObject: 0RSL_STMAT Strukturierter Artikel.
RSL_STMAT TYPE /BI0/OIRSL_STMAT,
InfoObject: 0RT_MOVRET Bewegungsart ist Retoure.
RT_MOVRET TYPE /BI0/OIRT_MOVRET,
InfoObject: 0RSL_STAUTO Automatisch ergänzte Komponente.
RSL_STAUTO TYPE /BI0/OIRSL_STAUTO,
InfoObject: 0RT_MOVTRAN Bewegungsart ist Umlagerung.
RT_MOVTRAN TYPE /BI0/OIRT_MOVTRAN,
InfoObject: 0RT_MATPOST Umbuchung Artikel an Artikel.
RT_MATPOST TYPE /BI0/OIRT_MATPOST,
InfoObject: 0RT_SASTSV Umsatzanteil am Set Verkaufswert in Hauswä
*hrung.
RT_SASTSV TYPE /BI0/OIRT_SASTSV,
InfoObject: 0RT_SASTST Umsatzanteil am Set Verkaufswert mit Steue
*r in Hauswährung.
RT_SASTST TYPE /BI0/OIRT_SASTST,
Field: RECORD.
RECORD TYPE RSARECORD, END OF tys_SC_1_full.
TYPES:
tyt_SC_1_full TYPE STANDARD TABLE OF tys_SC_1_full
WITH NON-UNIQUE DEFAULT KEY.
TYPES:
BEGIN OF tys_TG_1_full,
InfoObject: 0CHNGID Änderungslauf ID.
CHNGID TYPE /BI0/OICHNGID,
InfoObject: 0RECORDTP Satztyp.
RECORDTP TYPE /BI0/OIRECORDTP,
InfoObject: 0REQUID Request ID.
REQUID TYPE /BI0/OIREQUID,
InfoObject: 0CALDAY Kalendertag.
CALDAY TYPE /BI0/OICALDAY,
InfoObject: 0CALMONTH Kalenderjahr / Monat.
CALMONTH TYPE /BI0/OICALMONTH,
InfoObject: 0CALWEEK Kalenderjahr / Woche.
CALWEEK TYPE /BI0/OICALWEEK,
InfoObject: 0CALYEAR Kalenderjahr.
CALYEAR TYPE /BI0/OICALYEAR,
InfoObject: 0MATERIAL Material.
MATERIAL TYPE /BI0/OIMATERIAL,
InfoObject: 0PLANT Werk.
PLANT TYPE /BI0/OIPLANT,
InfoObject: 0STOR_LOC Lagerort.
STOR_LOC TYPE /BI0/OISTOR_LOC,
InfoObject: 0BATCH Chargennummer.
BATCH TYPE /BI0/OIBATCH,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0GN_VENDOR Lieferant.
GN_VENDOR TYPE /BI0/OIGN_VENDOR,
InfoObject: 0RECVS_VAL Zugangswert Bewerteter Bestand.
RECVS_VAL TYPE /BI0/OIRECVS_VAL,
InfoObject: 0ISSVS_VAL Abgangswert Bewerteter Bestand.
ISSVS_VAL TYPE /BI0/OIISSVS_VAL,
InfoObject: 0ISSBLOSTCK Abgangsmenge Gesperrter Bestand.
ISSBLOSTCK TYPE /BI0/OIISSBLOSTCK,
InfoObject: 0ISSCNSSTCK Abgangsmenge Konsignationsbestand.
ISSCNSSTCK TYPE /BI0/OIISSCNSSTCK,
InfoObject: 0ISSQMSTCK Abgangsmenge Qualitätsbestand.
ISSQMSTCK TYPE /BI0/OIISSQMSTCK,
InfoObject: 0ISSTRANSST Abgangsmenge Transitbestand.
ISSTRANSST TYPE /BI0/OIISSTRANSST,
InfoObject: 0RECBLOSTCK Zugangsmenge Gesperrter Bestand.
RECBLOSTCK TYPE /BI0/OIRECBLOSTCK,
InfoObject: 0RECCNSSTCK Zugangsmenge Konsignationsbestand.
RECCNSSTCK TYPE /BI0/OIRECCNSSTCK,
InfoObject: 0RECQMSTCK Zugangsmenge Qualitätsbestand.
RECQMSTCK TYPE /BI0/OIRECQMSTCK,
InfoObject: 0RECTRANSST Zugangsmenge Transitbestand.
RECTRANSST TYPE /BI0/OIRECTRANSST,
InfoObject: 0ISSSCRP Abgangsmenge Ausschuss.
ISSSCRP TYPE /BI0/OIISSSCRP,
InfoObject: 0ISSVALSCRP Abgangswert Ausschuss.
ISSVALSCRP TYPE /BI0/OIISSVALSCRP,
InfoObject: 0RECTOTSTCK Zugangsmenge Gesamt Bestand.
RECTOTSTCK TYPE /BI0/OIRECTOTSTCK,
InfoObject: 0ISSTOTSTCK Abgangsmenge Gesamtbestand.
ISSTOTSTCK TYPE /BI0/OIISSTOTSTCK,
InfoObject: 0ISSVALSTCK Abgangsmenge Bewerteter Bestand.
ISSVALSTCK TYPE /BI0/OIISSVALSTCK,
InfoObject: 0RECVALSTCK Zugangsmenge Bewerteter Bestand.
RECVALSTCK TYPE /BI0/OIRECVALSTCK,
InfoObject: 0VENCONCON Verbrauchswerte Lieferantenkonsignationsbe
*stand.
VENCONCON TYPE /BI0/OIVENCONCON,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
Field: RECORD Nummer des Datensatzes.
RECORD TYPE RSARECORD,
END OF tys_TG_1_full.
TYPES:
BEGIN OF tys_SC_1__RULE_9,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_9.
TYPES:
BEGIN OF tys_SC_1__RULE_10,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_10.
TYPES:
BEGIN OF tys_SC_1__RULE_11,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
END OF tys_SC_1__RULE_11.
TYPES:
BEGIN OF tys_SC_1__RULE_12,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_12.
TYPES:
BEGIN OF tys_SC_1__RULE_13,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_13.
TYPES:
BEGIN OF tys_SC_1__RULE_15,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
END OF tys_SC_1__RULE_15.
TYPES:
BEGIN OF tys_SC_1__RULE_19,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_19.
TYPES:
BEGIN OF tys_SC_1__RULE_20,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_20.
TYPES:
BEGIN OF tys_SC_1__RULE_21,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_21.
TYPES:
BEGIN OF tys_SC_1__RULE_22,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_22.
TYPES:
BEGIN OF tys_SC_1__RULE_25,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
END OF tys_SC_1__RULE_25.
TYPES:
BEGIN OF tys_SC_1__RULE_31,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_31.
TYPES:
BEGIN OF tys_SC_1__RULE_37,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_37.
TYPES:
BEGIN OF tys_SC_1__RULE_38,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_38.
TYPES:
BEGIN OF tys_SC_1__RULE_39,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_39.
TYPES:
BEGIN OF tys_SC_1__RULE_40,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_40.
TYPES:
BEGIN OF tys_SC_1__RULE_41,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_41.
TYPES:
BEGIN OF tys_SC_1__RULE_42,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_42.
TYPES:
BEGIN OF tys_SC_1__RULE_43,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_43.
TYPES:
BEGIN OF tys_SC_1__RULE_51,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_51.
Additional types for start routine interface
TYPES:
data_package_structure type tys_SC_1_full.
Additional declaration for update rule interface
DATA:
MONITOR type standard table of rsmonitor WITH HEADER LINE,
MONITOR_RECNO type standard table of rsmonitors WITH HEADER LINE,
RECORD_NO LIKE SY-TABIX,
RECORD_ALL LIKE SY-TABIX,
SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS.
global definitions from update rules
INCLUDE rsbctgn_top.
INCLUDE rsbctgn_update_rules.
FORM routine_9998
TABLES DATA_PACKAGE TYPE tyt_SC_1_full
CHANGING
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
see OSS note 571669
LOOP AT DATA_PACKAGE.
IF DATA_PACKAGE-stockcat EQ 'V' OR
DATA_PACKAGE-stocktype EQ 'V'.
DELETE DATA_PACKAGE.
ENDIF.
ENDLOOP.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_9998
FORM routine_0012
USING
COMM_STRUCTURE type tys_SC_1__RULE_9
CHANGING
RESULT TYPE tys_TG_1_full-ISSCNSSTCK
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
only goods issue is considered
IF ( COMM_STRUCTURE-processkey EQ '100' "Other Issues
OR COMM_STRUCTURE-processkey EQ '101' "Returns / Vendor
OR COMM_STRUCTURE-processkey EQ '104' "Material Transfer
OR COMM_STRUCTURE-processkey EQ '105' "Stock Adjustment InvD
OR COMM_STRUCTURE-processkey EQ '106' "Stock Adjustment Other
OR COMM_STRUCTURE-processkey EQ '110' ) "Issue from Stock Transfer
AND COMM_STRUCTURE-bwapplnm EQ 'MM'
only movements which are relevant for stock control
AND COMM_STRUCTURE-stockrelev EQ '1'
AND COMM_STRUCTURE-cpquabu <> 0.
only consignment stock is considered
CASE COMM_STRUCTURE-stockcat.
WHEN 'K'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
WHEN space.
IF COMM_STRUCTURE-stocktype CA 'KLM'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
ELSE.
RETURNCODE = 4.
ENDIF.
WHEN OTHERS.
RETURNCODE = 4.
ENDCASE.
ELSE.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 4.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_0012
FORM routine_0014
USING
COMM_STRUCTURE type tys_SC_1__RULE_10
CHANGING
RESULT TYPE tys_TG_1_full-RECCNSSTCK
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
only goods receipt is considered
IF ( COMM_STRUCTURE-processkey EQ '000' "Other Receipts
OR COMM_STRUCTURE-processkey EQ '001' "Goods Receipt / Vendor
OR COMM_STRUCTURE-processkey EQ '004' "Material Transfer
OR COMM_STRUCTURE-processkey EQ '005' "Stock Adjustment InvD
OR COMM_STRUCTURE-processkey EQ '006' "Stock Adjustment Other
OR COMM_STRUCTURE-processkey EQ '010' ) "Receipt from Stock Transfer
AND COMM_STRUCTURE-bwapplnm EQ 'MM'
only movements which are relevant for stock control
AND COMM_STRUCTURE-stockrelev EQ '1'
AND COMM_STRUCTURE-cpquabu <> 0.
only consignment stock is considered
CASE COMM_STRUCTURE-stockcat.
WHEN 'K'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
WHEN space.
IF COMM_STRUCTURE-stocktype CA 'KLM'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
ELSE.
RETURNCODE = 4.
ENDIF.
WHEN OTHERS.
RETURNCODE = 4.
ENDCASE.
ELSE.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 4.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_0014
FORM routine_0041
USING
COMM_STRUCTURE type tys_SC_1__RULE_11
CHANGING
RESULT TYPE tys_TG_1_full-GN_VENDOR
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
... determine consolidated key
IF COMM_STRUCTURE-stockcat EQ 'K'.
PERFORM gn_get_global_key TABLES MONITOR
USING COMM_STRUCTURE-gn_r3_ssy
g_c_bwbeoty_r3vendor
COMM_STRUCTURE-vendor
RECORD_NO
RECORD_ALL
CHANGING RESULT
ABORT.
if the returncode is not equal zero, the result will not be updated
Endif.
RETURNCODE = 0.
ENDFORM. "routine_0041
FORM routine_0010
USING
COMM_STRUCTURE type tys_SC_1__RULE_12
CHANGING
RESULT TYPE tys_TG_1_full-ISSVS_VAL
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
only goods issue is considered
IF ( COMM_STRUCTURE-processkey EQ '100' "Other Issues
OR COMM_STRUCTURE-processkey EQ '101' "Returns / Vendor
OR COMM_STRUCTURE-processkey EQ '104' "Material Transfer
OR COMM_STRUCTURE-processkey EQ '105' "Stock Adjustment InvD
OR COMM_STRUCTURE-processkey EQ '106 -
My iPod Touch says it needs to be activated. I go to activate it using wifi and it comes up with Activation Error: this device is not registered as part of the iPod Developer Program. I'm not a memeber of that. I'm not even an developer, I'm 14. My iPod has worked normally for months now. Then I go to connect it to iTunes to reset it (I have checked and iI have the latest version) The computer recognises the iPod is connected Tand it charges but nothing appears up on iunes. It worked fine yesterday
You say you have iOS 7. If you are a developer you have access to the private OS 7 developer's forum
iOS 7 Developer forum- Apple Developer
Otherwise you are on your own
PSA: iOS 7 If you're not a developer, don't install developer betas on your iPhone | TUAW - The Unofficial Apple Weblog -
Report to track configurator activity
Hello,
I am trying to configure 2 reports to track 'CONFIGURATOR' activity
1. When has the CONFIGURATOR logged in (date)
2. If he has logged in at all what did he do
Can somebody tell me on which report configuration will be the most appropriate for this?
Thanks in advance for your help.Hello,
I am trying to configure 2 reports to track 'CONFIGURATOR' activity
1. When has the CONFIGURATOR logged in (date)
2. If he has logged in at all what did he do
Can somebody tell me on which report configuration will be the most appropriate for this?
Thanks in advance for your help. -
CR10 Dev JRC ReportSDKException Report location is not specified in the configuration file error
I'm trying to embed a simple report into a j2ee application running under BEA WebLogic(without
workshop)
using the standalone Java Reporting Component (JRC), but I'm getting the exception
shown below (along with my config and source).
I'm just wondering at the cause of the exception, because I can successfully deploy
this code to jboss.
I've tried moving the CrystalReportEngine-config.xml file everywhere, from the
/WEB-INF/classes/ folder
to the /WEB-INF/ folder to the /WEB-INF/lib/ folder.
I consulted the product documentation on the JRC and its tutorials but it has
me stumped.
I went through the BEA WebLogic Workshop tutorial, which worked for some reason,
but I'm looking to do all the coding manually without any of BEA's controls and
what not.
Any information would be GREATELY APPRECIATED!!!
Thanks,
-Colin
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Report location is
not specified in the configuration file---- Error code:-2147
215356 Error code name:fileNotOpened
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.<init>(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown
Source)
at com.crystaldecisions.report.web.viewer.ReportAgentBase.case(Unknown
Source)
at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(Unknown
Source)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(Unknown
Source)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown
Source)
at jsp_servlet.__viewreport._jspService(__viewreport.java:197)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:446)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
My EAR file structure is as follows:
/crystal/ (context)
/reports/qtrade_sp_listing.rpt
/crystalreportviewers10/ -- bunch of crystal viewing stuff
/WEB-INF/classes/CrystalReportEngine-config.xml
/WEB-INF/lib/ -- bunch of crystal jar files
My CrystalReportEngine-config.xml is as follows
<?xml version="1.0" encoding="utf-8"?>
<CrystalReportEngine-configuration>
<reportlocation>../..</reportlocation>
<timeout>10</timeout>
<keycode>A2960-01C00FA-U700063</keycode>
</CrystalReportEngine-configuration>
My relevant Web.xml looks like:
<web-app>
<context-param>
<param-name>crystal_image_uri</param-name>
<param-value>/crystal/crystalreportviewers10/</param-value>
</context-param>
<taglib>
<taglib-uri>/crystal-tags-reportviewer.tld</taglib-uri>
<taglib-location>/WEB-INF/crystal-tags-reportviewer.tld</taglib-location>
</taglib>
</web-app>
My JSP Page Source:
<%@ page language="java" contentType="text/html;charset=UTF-8"%>
<%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
<html>
<head>
<title>Web Application Page</title>
</head>
<body>
<crviewer:viewer
viewerName="SPListingReport"
reportSourceVar="_SPListingReport"
displayGroupTree="false"
displayToolbarToggleTreeButton="false"
reportSourceType="reportingComponent">
<crviewer:report reportName="reports/qtrade_sp_listing.rpt"></crviewer:report>
</crviewer:viewer>
</body>
</html>I'm trying to embed a simple report into a j2ee application running under BEA WebLogic(without
workshop)
using the standalone Java Reporting Component (JRC), but I'm getting the exception
shown below (along with my config and source).
I'm just wondering at the cause of the exception, because I can successfully deploy
this code to jboss.
I've tried moving the CrystalReportEngine-config.xml file everywhere, from the
/WEB-INF/classes/ folder
to the /WEB-INF/ folder to the /WEB-INF/lib/ folder.
I consulted the product documentation on the JRC and its tutorials but it has
me stumped.
I went through the BEA WebLogic Workshop tutorial, which worked for some reason,
but I'm looking to do all the coding manually without any of BEA's controls and
what not.
Any information would be GREATELY APPRECIATED!!!
Thanks,
-Colin
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Report location is
not specified in the configuration file---- Error code:-2147
215356 Error code name:fileNotOpened
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.<init>(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown
Source)
at com.crystaldecisions.report.web.viewer.ReportAgentBase.case(Unknown
Source)
at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(Unknown
Source)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(Unknown
Source)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown
Source)
at jsp_servlet.__viewreport._jspService(__viewreport.java:197)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:446)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
My EAR file structure is as follows:
/crystal/ (context)
/reports/qtrade_sp_listing.rpt
/crystalreportviewers10/ -- bunch of crystal viewing stuff
/WEB-INF/classes/CrystalReportEngine-config.xml
/WEB-INF/lib/ -- bunch of crystal jar files
My CrystalReportEngine-config.xml is as follows
<?xml version="1.0" encoding="utf-8"?>
<CrystalReportEngine-configuration>
<reportlocation>../..</reportlocation>
<timeout>10</timeout>
<keycode>A2960-01C00FA-U700063</keycode>
</CrystalReportEngine-configuration>
My relevant Web.xml looks like:
<web-app>
<context-param>
<param-name>crystal_image_uri</param-name>
<param-value>/crystal/crystalreportviewers10/</param-value>
</context-param>
<taglib>
<taglib-uri>/crystal-tags-reportviewer.tld</taglib-uri>
<taglib-location>/WEB-INF/crystal-tags-reportviewer.tld</taglib-location>
</taglib>
</web-app>
My JSP Page Source:
<%@ page language="java" contentType="text/html;charset=UTF-8"%>
<%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
<html>
<head>
<title>Web Application Page</title>
</head>
<body>
<crviewer:viewer
viewerName="SPListingReport"
reportSourceVar="_SPListingReport"
displayGroupTree="false"
displayToolbarToggleTreeButton="false"
reportSourceType="reportingComponent">
<crviewer:report reportName="reports/qtrade_sp_listing.rpt"></crviewer:report>
</crviewer:viewer>
</body>
</html> -
I am unable to print anything from an internet web page. I continually get "printer not activated, error code- 30" followed by "An unknown error occurred while printing". I can copy the material from the web page, place into a Word document and then print. This just started yesterday and I have no idea why. Would appreciate your advice!
See this:
[http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page] -
When I try to print from web page I get a dialogue box "Printer not activated - error code 30" followed by a dialogue box "An unknown error occurred while printing". The printer works on websites when I use Internet Explorer. Also, if I copy the web page and paste it into a Word document, I can print a copy. This issue just started this week; I have not encountered this problem prior to this week. Please advise.
What does that error message say?
See this: http://kb.mozillazine.org/Problems_printing_web_pages
Maybe you are looking for
-
Sales employee field in VA01 blocked & which fields are must to see in COPA
Hi, I am able to see all the transactions from SD and FI direct postings coming into COPA. But the management wants to see the profitability in Sales employee level also. I am able to give the sales employee wise details in FI but in SD vao1 while
-
How do I add to do list to doc?
How do I put "to do" list to my doc? I want easy access and do not want to open mail to get to it. Any thoughts? Might there a better to do list elsewhere? Thank you.
-
ITunes 2 double-clicks to play a song...
Since I've downloaded recent version of iTunes (10), I have to double click a song twice before it will play. One double click will only select the song, it won't start playing. It's very annoying, is this just a change to iTunes that I'm stuck with
-
Why it need in spring application context if integrated with hiberate
Dear all, in hiberate.xml which has specified the connection data source. I don't understand why the following need to be defined in spring application context. Or I have made a mistake that data source connection can be defined in hiberate.xml or in
-
Incomplete information contacts on phone
I have a Nokia C3 and managed my contacts with OVI suite. I have contact who have multiple phonenumbers and mailadresses. Some contacts only show the phone numbers and 1 mailadres. In Ovi suite however they are complete... How comes i only see half o