STMS configuration in EHP4
Hi Guys...........
We have installed EHP 4 SP 5 and configured STMS for 2 system landscape taking one system as virtual.But our function consultants are having issues when uploading Master data.they say that Transport Requests are being generated (actually they shud not be generated ).
I have checked all client settings and system settings.
Is there any different STMS configuration needed for EHP 4 ???????
Please any one suggest....
Regards,
sandhya.
In addtion :
If I move CI & DB on single host then the issue get`s resolved.
It means STMS / RFC works fine with ( active - passive scenario where it fails in active - active scenario )
Similar Messages
-
STMS Configuration in Distributed environment
Hello ,
Is there any extra efforts involved to configure STMS in Distributed Installation (i.e ABAP CI reside on Host A & ABAP DB redide on Host B)?
In my case DEV , QA & PRD ( CI & DB ) instalaled on indivisual servers.
In STMS configuration there is no issue with DEV & QA System while distributing the STMS.
But when I distribute & try to activate the PRD System the error :
a)RFC error :
======> CPIC-CALL: 'CMACCP : rc=20
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 'prddbhost:3301' not reached
b)RFC :CALLTP_Linux also failed to connect the system
Where in DEV & QA System the RFC "CALLTP_Linux" has no issue.
The PRD CI & DB is a HA ( active - active )
Regards,
Santopsh KaradkarIn addtion :
If I move CI & DB on single host then the issue get`s resolved.
It means STMS / RFC works fine with ( active - passive scenario where it fails in active - active scenario ) -
Error during STMS configuration
I had perform a system copy with different system ID from the source system successfully. I encounter some problem during the STMS configuration. I already set all the configuration for the target system but when I tried to transport one configuration from one client to another, it prompts out error as below:
Transport control program tp ended with error code 0247
Errors: addtobuffer has problems with data- and/or cofile
However, when I check back the source system, there are no such problem even without the 2 files above.Swiber SAP wrote:
If I did not use the same name as the source system database, the transport number will begin with the new system ID. Is there way where I can import the transport number from the source system to the target system?
In normal practice, SID of development, quality and production system's SID's are different, and we do the transport between these systems. So, answer of your question is you can do the transport if SID is different.
My question to you are :
Have you reconfigured STMS after system refresh ? What is role of the system that is created after system copy ? What is transport route of your systems in which are doing transport ?
Thanks
Sunny -
STMS Configuration - Change Virtual System with Real System
Dear all,
My system, if I go in the transaction STMS in DEV system, was configureted in the following way:
DEV => QA => PROD (Virtual System)
Now, I want to change the PROD Virtual System in PROD Real System.
How Can procede?
Can you explain step-by-step the process?
Because the system was configureted from other people, and I'm new to using the STMS.
Thanks in advanced for your help.
Best Regards,
GiulioHi,
After the planned system is physically installed it is time to replace the Virtual System with the realized system.
The procedure for the same is as under:
1) Delete the Virtual System from the transport domain
. Login into Transport Domain system client 000
· Using STMS got to Overview=> Systems
· Chose SAP Virtual System=> Delete (confirm)
· Distribute configuration change.
As soon as the configuration change is distributed, the virtual system is deleted. The import queue for this system in TMS disappears but it is available as import buffer at the operating systems level.
Now add the new (physical system) to the transport domain:
If STMS is configured as standalone system then first delete STMS configuration on PRD system
login into PRD system client 000. (delete STMS configuration if present.)
run stms -> it's ask for set up STMS -> click on other configurition (F6)
Target Host -> host name of domain controller ( host name of transport domain system)
System number -> Instance number of domain controller ( instance number of transport domain system)
Now,
Go to the Transport Domain Controller and accept the system. (As the import buffer is available at the operating system level, no change requests will be lost)
Distribute the configuration changes.
regards,
kaushal -
STMS configuration windows and unix
Dear guru,
We had a two system landscape.Dev system in windows and prd system in unix.
We are configuring the STMS . We take domain controller in prd system.The common transport Directory in Prd system that will map to dev system .There is a error messge, the dev system cannot access the bin(profiles) and .cfg files.
Kindly provide the solution.
regards
gunaYes I created a samba/CIFS.
The security levels is share .I created a same user in windows system with permisson <sid>adm user privilages.
In the Unix system acess is working fine.but windows the file system is not acess by the TMSadm user.
when the stms configuration the profile file will be access by the tmsadm and write in the profiles (/bin).that process not done by the windows server.
guna -
Existing STMS configuration and CHARM setup
Experts:
We have a pretty complicated STMS configuration because of many clients from ECC DEV, QA and one production client.
Now we want to set up CHARM.
Can we use the current STMS configuration without making any change on STMS for this CHARM project?
I have done a lot of reading on this and come up with this layout for logical components:
For customizing clients:
DEV101->QAS101-> QAS200 ->PRD100
DEV102->QAS102-> QAS200 ->PRD100
DEV103->QAS103-> QAS200 ->PRD100
For code development
DEV104->QAS104-> QAS200 ->PRD100
Because QAS200 is the only QA client that has a tp router to PRD100
We plan to create a dedicated project (therefor a dedicated maintenance cycle) for each of above logical components.
Would you please inform us whether it's smart for us NOT change current STMS configuration?
Thanks!Hi Jennifer,
I am quite sure that you can use the current STSM configuration with ChaRM. You will need to configure a logical component for each track and add to the same maintenance cycle.
It is important that you assign a transport layer to each of the development clients, but I am sure this is already done. Assign each QAS with role "target system ".
Best Regards,
Holger -
HI all,
I am trying to import the data from dev server but i got the error message " Transport control program tp ended with error code 0212" Errors: could not access file as supposed (see SLOG for more info) i think its becase of the configuration problem in stms plz help me to configure the stms correctly plz tell me the procedure.hi
i am also faceing same problem .
i have check and obsrverd that all the transport request that are released from dev --->qas which is having sidadm (owner)permission (rw-rw ) this can be imported in system
which i am trying to import the request is having root (owner) and permission (rw--r)
which i can not import into the system
i have to chage the permission to rw--rw manyally
how to change the owner ship of the transport request .
regard
prasad -
Problem with STMS configuration ( READ_PROFILE_FAILED )
Hi All,
When i am configuring STMS in solution manager getting below error.
message :READ_PROFILE_FAILED
Command TMS_PM_READ_PROFILE
Service tp Profile Service
Start Online
Function TMS_PS_READ_PROFILE_FROM_DISK
Message READ_PROFILE_FAILED
Function TMS_PS_WRITE_PROFILE_TO_DISK
Message SET_CODEPAGE_FAILED
error: Transport control program tp ended with error 0212
Please help me.
Thanks,
Balu...Hi Balu,
Key here is
DB Connect -- Link to database failed
Offline Call -- could not access file as supposed
which is tp is unable to connect to your database.. indirectly R3trans may not be working fine.
While you are configuring TMS tp will conenct to database to update database tables which it is unable to do.
Please provide trace of R3trans -d
1. Logon at OS level with <sid>adm
2. Execute R3trans -d and paste the contenct of trans.log in the same directory where you executed R3trans -d
3. If you are able to solve DB connection error your self you can else please give OS and DB version and also Environment variables for the user sidadm.
Thanks,
Kiran. -
Dear All,
We have configured a transport route configuration as below :
SND ->> Consolidation Route pointing to -->> DEV ->> Consolidation Route pointing to >> Transport Group(/ECQ/)->> QA1 & QA2 >> Delivery Route from QA1 & QA2 pointing to>> Transport Group (/PRD/) -->> PRD1 & PRD2 Systems
we have to configure the same in application side (SAP) by Extended Transport Control feature of STMS
I want to configure the back end feature of STMS.Kindly tell how to congiure for this configutration .
For information both Production & Quality servers are at different location . (i.e 1 QA & 1PROD ) , (1 QA & 1PROD ) )
Thanks
s sureshHi Suresh,
The easiest thing to do, is create a domain link between your two transport domains. When your QA and PROD systems on the different locations have the same system ID's, than this is even the only option, since a system ID needs to be unique within a transport domain.
Check the following link how to configure a domain link and some explanation about transport domains: http://help.sap.com/saphelp_nw70ehp1/helpdata/en/44/b4a0e87acc11d1899e0000e829fbbd/frameset.htm
Kind regards,
Mark Dijsselbloem -
Dear Experts,
I have some problem in STMS, During the configuration of STMS.
I have getting syntax error in STMS ad below :-
Category ABAP Programming Error
Runtime Errors SYNTAX_ERROR
ABAP Program CL_CTS_FILE_SERVICE===========CP
Application Component BC-CTS-ORG
Date and Time 07.07.2014 10:19:56
|Short text |
| Syntax error in program "CL_CTS_FILE_SERVICE===========CP ". |
|What happened? |
| Error in the ABAP Application Program |
| |
| The current ABAP program "SAPLTMSU" had to be terminated because it has |
| come across a statement that unfortunately cannot be executed. |
| |
| The following syntax error occurred in program |
| "CL_CTS_FILE_SERVICE===========CP " in include |
| "CL_CTS_FILE_SERVICE===========CM011 " in |
| line 73: |
| "The data object "FILE" does not have a component called "PURPOSE"." |
| " " |
| " " |
| " " |
| |
| The include has been created and last changed by: |
| Created by: "SAP " |
| Last changed by: "SAP " |
| Error in the ABAP Application Program |
| |
| The current ABAP program "SAPLTMSU" had to be terminated because it has |
| come across a statement that unfortunately cannot be executed. |
|Error analysis |
| The following syntax error was found in the program |
| CL_CTS_FILE_SERVICE===========CP : |
| "The data object "FILE" does not have a component called "PURPOSE"." |
| " " |
| " " |
| " " |
|Trigger Location of Runtime Error |
| Program SAPLTMSU |
| Include LTMSUU75 |
| Row 1 |
| Module type (FUNCTION) |
| Module Name TMS_UI_GET_TMSADM_CREDENTIALS |
|Source Code Extract |
|Line |SourceCde |
|>>>>>|function tms_ui_get_tmsadm_credentials. |
| 2|*"---------------------------------------------------------------------- |
| 3|*"*"Lokale Schnittstelle: |
| 4|*" IMPORTING |
| 5|*" VALUE(IV_FOREIGN_DOMAIN) TYPE TMSDOMNAM OPTIONAL |
| 6|*" VALUE(IV_REQUIRE_PWDCOPY) TYPE FLAG OPTIONAL |
| 7|*" VALUE(IV_SUPPORT_OWNPWD) TYPE FLAG DEFAULT 'X' |
| 8|*" VALUE(IV_SUPPORT_KEEPPWD) TYPE FLAG OPTIONAL |
| 9|*" EXPORTING |
| 10|*" REFERENCE(EV_PASSWORD) TYPE RFCAUTH |
| 11|*" REFERENCE(EV_STANDARD_USED) TYPE FLAG |
| 12|*" EXCEPTIONS |
| 13|*" CANCELLED_BY_USER |
| 14|*"---------------------------------------------------------------------- |
| 15| |
| 16|* fill global structure |
| 17| clear gs_dyn173. |
| 18| gs_dyn173-user = 'TMSADM'. |
| 19| gs_dyn173-domain = iv_foreign_domain. " p.k. Domainlink accept |
| 20| gs_dyn173-pwdefine = iv_require_pwdcopy. |
|Active Calls/Events |
|No. Ty. Program Include Line |
| Name |
| 5 FUNCTION SAPLTMSU LTMSUU75 1 |
| TMS_UI_GET_TMSADM_CREDENTIALS |
| 4 MODULE (PAI) SAPLTMSU LTMSUI01 333 |
| USER_COMMAND_0130 |
| 3 FUNCTION SAPLTMSU LTMSUU07 104 |
| TMS_UI_CONFIGURE_CONTROLLER |
| 2 FUNCTION SAPLTMSU LTMSUU04 121 |
| TMS_UI_CONFIGURE_SYSTEM |
| 1 MODULE (PBO) SAPLTMSU LTMSUO01 68 |
| STATUS_0100 |
Many thanks
Subhash N BhalekarDear Deepak Kori,
Thanks for quickly reply .
Please Check some details as below
1) SAP version and patch level
SAP ERP 6.0 EHP 6 and pacth level 300
2) Database version and patch level
DB Sybase 15.7 and Sybase ASE 15.7.0.1260
3) Any upgrade or patch update activity performed recently after which issue started ?
Yes , I had start up-grading SP but yet syntax error not solved , i have post that issue in SCN and also SAP OSS . you can also check my thread SAPLPA_PACKAG -
Hi All,
I wa sin process to do support patch updation which throwed an error TP_CANNOT_CONNECT_SYSTEM.
I tried to configure STMS but it shows error like "The TMS configuration is inconsistent".When i click on Overview->System and try to distribute configuration to all system it shows me error as
Command TMS_PM_DISTRIBUTE_PROFILE
Service tp Profile Service
Start Online
Function TMS_PS_WRITE_PROFILE_TO_DISK
Message SET_CODEPAGE_FAILED
Could not start transport control program tp
Kindly Help....- check your tp path and RFC. If there is error like " Error when opening an RFC connection", then check the RFC connection in SM59
- check if user authorize to start tp command
- Please try to register the tp program in the gateway as detailed by SAP note 353597 and then check the radio button "Registered Server Program" in the destination CALLTP_XXX (TCP/IP Connection in SM59)
- secinfo.* file (note 110612)
Regards,
Vincent -
STMS configuration error SAPSQL_ARRAY_INSERT_DUPREC
Hello Experts,
We have upgraded out BW system from BW3.5 to BI7 EHP1. We have deleted the current STMS config using DICO. Now when we are re-configuring the STMS, we are getting dumps stating SAPSQL_ARRAY_INSERT_DUPREC -- The ABAP/4 Open SQL array insert results in duplicate database records.
We are help up at this point. Tried to dig through various forums. Please help!
Best Regards,
Anup ThatteHi,
From which client have you deleted the TMS. Please login to 000 client of the domain controller and delete the TMS from STMS tcode and also delete all the transport routes and after that distribute changes. Then create the TMS again and add systems to it, create the transport routes and then activate and distribute the changes to the system.
Thanks & Regards,
Sharath -
STMS configuration issue due to LONG hostname
sapcrm01-esrv\sapmnt\trans
We are facing a problem in configuring STMS Actually we use term sapcrm01-esrv as hostname and now when we tried to update the TMS configuration it is using on sapcrm01 and not the other section So it generates error File
pro28\sapmnt\trans\bin\TP_DOMAIN_CRM.PFL could not found. No such directory or file exist
Also TRANSDIR parameter in the TRANSPORT TOOL(marked in blue is not picked as per the hostname & done manually) It was pro28 instead of sapcrm01-esrv
But when we test RFC connection it uses SAPCRM01 section and fleshes connection to localhost OKI am not able to do it on the local system itself.
Regards
Jaswant -
Dear Experts,
We are using ecc 5.0 on oralce database on unix.actually i got doubt to configure stms.My domain controller is Domain_TPD.
which is development system.now that system is down.and the testing server is TPU.And production is TPU.
I have a doubt that i can delete that domain controller and i can create Domain controller in production and i will add testing system to production.Do i configure the same thing in stms.is it possible to create TMS between two systems with same sid.
Please suggest me.
Regards,
NaveenHi ,
Please find answer to your questions::
1. i can delete that domain controller and i can create Domain controller in production:: yes you can delete the current configuration & make PRD system as domian controller .
2. i will add testing system to production:: yes you can add new system to new domain.
3.is it possible to create TMS between two systems with same sid.:: Same SID will not be supported in one landscape.You must have dieffrent SIDs .If you are asking the question like if you can configure the transport route in same system then you can do it by creatinf a dummy system.
Thanks..
Mohit -
Stms configuration is posible through sap*
Dear All,
I have to configure STMS in dev server but sapadmin is locked due to production password in 000 client. I m able to login to sap* and ddic but i m not getting any create option there so that i can create new user and assign sap_all and sap_new profile.
Can i cofigure STMS through SAP* in 000 client?Does sap recommend that?
Need ur suggestion
Regards
AshokDear Markus ,
So i have to create a new user in 000 client having profile of sap_all and sap_new.So i cant configure STMS through sap* and DDIC.
Actaully i m not able to create any user in 000 client through DDIC or SAP* .Do u have any idea of productive password.
I m not able to create any user not even i m getting option to change the password of exixting user.Message is coming productive password.
Need ur suggestion...
Regards
Ashok
Maybe you are looking for
-
My wife and I have our own apple accounts (for our iphones) but share (or fight really!) over the only iPad. Is it possible to download Apps from both our accounts onto the Ipad, or would this violate the T&C and so not possible? Any thoughts most we
-
Certain websites crash when I open them
I am so frustrated. I kept going to certain websites( Goodreads for example) and safari closes the minute they open. I took my iPad to the Mac store and they said there was a software issue and replaced it for free since it was still under warrant
-
When make GRN i receive this message how to solve this?
When making GRN I receive this error how to solve this? The UOM conversion does not exist Procedure The UOM conversion does not exist in the material master for the material and UOM entered Not maintained alternative unit of measure I have checked i
-
I have tried to delete it via terminal but no luck, have also run a disk permissions repair but no luck. I still shows when starting the mac or restarting it. Any of you have a good suggestion of what do?? Just hate when it appears every time I start
-
How can I fill the NRIV table ??
Hi, I want use the following form : USEREXIT_NUMBER_RANGE. But I need to fill some information in the NRIV table like new intervals range. How can I access to this table and fill my new information ? Thanks in advance for your help.