STMS configuration issue due to LONG hostname

sapcrm01-esrv\sapmnt\trans
We are facing a problem in configuring STMS Actually we use term sapcrm01-esrv as hostname and now when we tried to update the TMS configuration it is using on sapcrm01 and not the other section So it generates error File
pro28\sapmnt\trans\bin\TP_DOMAIN_CRM.PFL could not found. No such directory or file exist
Also TRANSDIR parameter in the TRANSPORT TOOL(marked in blue is not picked as per the hostname & done manually) It was pro28 instead of sapcrm01-esrv
But when we test RFC connection it uses SAPCRM01 section and fleshes connection to localhost OK

I am not able to do it on the local system itself.
Regards
Jaswant

Similar Messages

STMS configuration Issue

Hello Gurus,
I Need your help Urgently
We have our DEV CRM system : C74
PRD system : CAP
I configured each system as domain and to link them used the following
STMS>System Overview>SAP System>Create System>Domain Link.
from the PRD system.
I added the domain link from CAP and approved.
The system seems configured.
Both the systems TRANS directory are different
CAP:
ocbomsap07\sapmnt\trans
C74:
OCBOMSAP05\sapmnt\trans
The STMS seems to be configured , but when i run STMS Tx on CAP or C74 it shows both systems , but when i click on C74 queue the queue shows "empty"
There is no TR seen in C74 queue .
May i know why ?? or what setting have i done wrong ??
CAP queue shows more than 1000 request which i seem is ok.
I tested one TR and it got released and is reflected in PRD system and is waiting to be imported.
But my major concern why the TR's are not seen in DEV system queue ??
Regards,
Victor

Hi Victor,
I guess you are missing the logic here.
In dev system, you create and release the TR for other systems like QS and PRD.
In the import queue of QAS/PRD the TR will be visible.
I believe there is no issue with you configuration.
Regards,
Dipesh

[EPM Configuration] OracleDB - OC4J Configuration issue .... not found

Hello,
after analysing endlessly the existing workarounds for this problem, i conclude that mine is not posted yet.
Intro
In order to install EPM, i had to install Oracle Database 11g. After the installation, an error ocurred stating that configurations were not saved and i could run manually "ECMA.bat" later.
I tried to configure it by creating environment variables such as:
- ORACLE_SID
- ORACLE_HOSTNAME
- ORACLE_UNQNAME
So far, i haven't tried to executed ECMA.bat for the last time, since I am quite sure that i will fail due to not recognizing the hostname.
The issue
Whili trying to make sure that the database is correctly configured, i tried to access to the webpage, unsuccessfully.
Then i found my problem in the forums:
When i type in CMD:
--> (I type)
C:\OracleDB_app\alexandreyin\product\11.2.0\dbhome_1>emctl status dbconsole
--> (returns)
OC4J Configuration issue. C:\OracleDB_app\alexandreyin\product\11.2.0\dbhome_1/o
c4j/j2ee/OC4J_DBConsole_HPCM.lab.pt_orcl not found.
In fact there was no folder with that name, nor something like "/OC4J_DBConsole_localhost_orcl" as many posts suggests.
I only have folders like:
- "home"
- "oc4j_applications"
- "OC4J_DBConsole"
- "OC4J_Workflow_Component_Container"
- "OC4J_Workflow_Management_Container"
- "utilities"
- "deploy_db_wf"
Some posts suggests me to change my /driver/etc/host file, but i think my current file is correct:
--> (Content of host gile)
127.0.0.1 localhost
XX.XXX.XXX.XXX HPCM.lab.pt
Honestly, i am out of ideas and i wish any experienced colleague could give me a hint.
Thanks in advance

Hi,
It is worth having a look at the following document on Oracle support.
Problem - emctl start dbconsole Fails with Error OC4J Configuration issue OC4J_DBConsole_<HOSTNAME>_<DBNAME> not found *[ID 555218.1]*
Linux 64bit DBConsole Fails With "OC4J Configuration issue cannot find /oc4j/j2ee/oc4j_DBConsole_..." *[ID 462325.1]*
Thanks,
HyperEPM

Can't access icloud due to long running script

keep getting this error message when logging on to icloud to access my email:
can't access icloud due to long running script
And if I do get logged into icloud and try to open the email application I can't open my email or any other applicationii.
HELP

Welcome to the Apple Community.
Delete your mail account from Mail preferences and set it up again using the Mail Server Information.
Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
Entering iCloud email settings manually in Snow Leopard or Leopard
Entering iCloud email settings manually in Tiger

Wondershare's iDraft for $2.99 will not update crashing issues due to 4.2!

Wondershare will not update their iDraft App, on the App Store, for compatibility issues due to iOS 4.2! iDraft costs $2.99, and should be pulled from the app store. An app should not be sold, until the issue is addressed. It's wrong, and I want to see some progress, instead of emails saying that we are heading in a different direction... Then return email back saying that we are now working on the issue, and I could get a discount on Wondershare apps...
Wondershares response to fix the Crashing issues for iDraft...
(1st Response)
"Dear Customer,
Thanks for contacting us. This is Ivan from support team.
Currently iDraft does not support iOS 4.2, and we do not provide future upgrades for this product due to our company long-term blueprint.
Sorry for the inconvenience.
We are now working on a new application on Android platform.
Just let me know if you have any question."
(2nd Response)
"Dear Customer,
I am very sorry for the trouble.
We have temporary paused the future upgrades of this product, but never permanently give up it.
And we are focused on another product which we hope it can bring more fun to all iPad users.
I have forwarded your message to our R&D department, and we will look into this case and improve the software performance.
As compensation, we can offer you an extra 20% off if you are interested on any product on our official site. Just let me know the product name.
Let me know if you have any question."
(3rd Response)
"Dear Customer,
I am very sorry for the trouble.
Currently iDraft does not support iOS 4.x, we are now working on the update.
If you don't mind, I recommend you wait for next upgrade.
I will send a message to you as soon as we launch it.
Or you may contact Apple for refund if you prefer. We would like to offer you a refund but we are not able to do it, there is no refund option in vendor's portal."
I have reported the issue to Apple, and thought this may be of interest to you guys as well.
Your Thoughts?

Welcome to Apple Support Communities
Snow Leopard is a paid upgrade. http://support.apple.com/kb/sp575 Call Apple to buy Snow Leopard. Then, make a backup, insert the DVD and upgrade. When it finishes, open  > Software Update

Anti-relay filter configuration issues

Configuration issues with the anti-relay filter in Messaging Server 4.1x.
The following information addresses common questions about configuration issues
with the anti-relay filter in Messaging Server 4.1x: 

<OL>
<LI>Question: 
What is the difference between the delivery
and submission
options? 

Answer: 
The submission option
allows specified users to send email to any email address in the world.
These users are typically internal users.

The delivery option
allows specified users to receive email from anybody. These users
are also typically internal users.

A standard filter will appear something as follows: 

# This is the anti-relay config file written by Jay at iPlanet
# The first section sets default conditions
resolvehostnames:0
useauthinfo:0
advertiseauthinfo:1
# This section sets domains to be delivered to by anybody
delivery:*@my.domain.com
# This section sets domains that can send any place
submission:129.12.4.*


<LI>Question: 
The delivery
option works properly. However, why doesn't the
submission option
appear to be allowing emails from specified users to pass through?

Answer: 
The problem with the submission behavior could be due to the setting of the
the resolvehostnames
parameter. If this parameter is turned on
(resolvehostnames:1),
then all entries in this configuration file must be fully qualified
host names. Although wildcards will work, you cannot specify IP
addresses with this configuration setting.


<LI>Question: 
Is it possible to allow people outside of my network to connect to the server
and send mail out?

Answer: 
Yes. To allow outside users to connect to the server and send mail
to any address, without granting the same privilege to the rest of the world,
activate the authenticated SMTP portion of the filter via the
useauthinfo option.
Setting this parameter to "1" (i.e., useauthinfo:1
) will require a user who is not in a
submission address and who is attempting to send email to an address not in
the delivery range to authenticate with a user ID and password.
</OL>

For additional information on the anti-relay filter, please refer to the
Messaging Server 4.1 Administrator's Guide at 

http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/ubefiltr.htm#1073677

Prashant:
Are you using a UBE filter to configure domain-based anti-relayinging? We had better luck with the anti-relay plug-in. There is some info on this (for 4.15) at
http://docs.sun.com/source/816-6044-10/ubefiltr.htm#1069973
You have to enable the plug-in using configutil, per the above. The anti-relay plug-in is controlled by antirelay.conf. Be aware that the pattern matching rules are very limited, and not well documented. Fortunately, the source code to the plug-in is included, and you can see what it is doing. To pass the tests we had to add a hard-coded test for a "%" in the source and recompile:
*** antirelay.c.orig Thu Oct 31 04:42:13 2002
--- antirelay.c Thu Oct 31 04:22:07 2002
*** 934,939 ****
--- 934,940 ----
* Weight must be non-zero to begin with so that matches on just "*"
* will work.
+ if( strchr(text,'%') != NULL ) return ABORT;
weight = TRUE;
for ( ; *p; text++, p++) {
if (*text == '\0' && p != '')
Not a really elegant hack, but we didn't need a fully functional regex engine.

"Enterprise manager configuration failed due to the ff... 11 g/windows 7

I get this error message, when using DBCA to create a database. Please help! Studying on my own for OCA.
Error message : "Enterprise manager configuration failed due to the following error - Listener is not up or database service is not registered with it. Start the listener and register database service and run EM Configuration Assistant again."
I did the following :
(1)Checked listener service properties and found that the path to executable was
driveletter:\app\product\11.1.0\db_2\bin\oracle.exeoca11g
I change the path above to what is listed below:
driveletter:\app\product\11.1.0\db_2\bin\tnslsnr
I updated :HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OracleOCA11gTNSListener
image file to reflect the change .
I got the above suggestion from a blog. Not sure if it is right or wrong, but it seems logical. However, it did not resolve my issue
(2) I ran the emca script in db_home/bin directory as suggested by the warning message in DBCA wizard. Reboot my PC. Still no luck.
(3) I open DBCA to verify the database(via delete) is created, and yes it is .
I open EM and attempted to log into the tool as Sys/sysdba user. I get username and/or password are invalid error message. URL: https(strike-through)localhost://158/em/console/logon/logon
I can connect to SQl plus as either a sys/sysdba user but into EM.

Ok here is my listener status
C:\>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 25-JAN-2013 14:01
:59
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 25-JAN-2013 07:12:48
Uptime 0 days 6 hr. 49 min. 13 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\app\Barbara\product\11.2.0\dbhome_2\network\admin\l
istener.ora
Listener Log File c:\app\barbara\diag\tnslsnr\Lenovo-PC\listener\alert\l
og.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "OCA11GXDB" has 1 instance(s).
Instance "oca11g", status READY, has 1 handler(s) for this service...
Service "OCA2XDB" has 1 instance(s).
Instance "oca2", status READY, has 1 handler(s) for this service...
Service "oca11g" has 1 instance(s).
Instance "oca11g", status READY, has 1 handler(s) for this service...
Service "oca2" has 1 instance(s).
Instance "oca2", status READY, has 1 handler(s) for this service...
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
This is the OracleoraDB11g_home1TNSlistner image file value is this
C:\app\Barbara\product\11.2.0\dbhome_2\BIN\TNSLSNR
Aaaah! I do not like the sound of this. Oracle enterprise edition does not support windows home edition and Oracle XE does not have DBCA included.
Ok, so this is a road block, please suggest alternative routes.
Thanks
Edited by: Ant13 on Jan 25, 2013 2:21 PM
Edited by: Ant13 on Jan 25, 2013 2:33 PM

Strange issue when pausing LONG audiobook--pressing play again changes the

Strange issue when pausing LONG audiobook--pressing play again changes the position within the book--it doesn't start back exactly where it left off.
The audiobook of "Harry Potter and the Half Blood Prince" is between 18 and 19 HOURS long--all as one long track/file.
I've noticed that when I pause while listening and then press play again, it "rewinds" and starts playing portions of the audiobook from about 10 minutes prior--but the time stamp doesn't change. At least this is the time frame from the first "test". Other pauses/plays may result in different time differences.
The first time this happened, I didn't realize what it was doing. I pressed play (from the pause) and I heard a portion that I had already played. I thought that the bookmark just didn't "remember" as it should have, so I scrubbed forward trying to find where I remembered leaving off. If you end up pausing/playing even a couple of times with this happening each time, the portion of the audiobook that you're playing and the time stamp becomes COMPLETELY off! For example, almost an hour into the time stamp was really only about 10-15 minutes into the actual book.
I'm not sure if this makes any sense, but hopefully it does to someone. It's very frustrating to have this happen simply because you had to pause while listening. You have to scrub backwards or forwards each time to find out where you REALLY left off at and the time stamp becomes of no help value since it doesn't change as the playback position moves itself.
I'm sure that this is something happening due to the extreme length of the audio file. That maybe it can't track as precisely as it could with shorter lengths. ???
Any ideas? Has anyone else seen this happen? Any ideas on whether or not there is anything that can be done to prevent this?

I'm glad that I'm not the only one having this
problem. It's ironic that we're both having issues
with the SAME audiobook. I haven't had a chance to
listen to Books 1-5 much to see if they have the same
issue or not--I don't remember any on the few parts
that I've played for my nephews.
Yeah, I know! I was shocked to see that. I recently finished HP5 (twice), and NEVER had this issue, but it is a much smaller file size.
I'm thinking that I may try to convert to AAC before
I try the splitting program--in theory, it's easier
to start right back in again when you only have 1
track to find, than when you have dozens/hundreds of
smaller tracks. It's sometimes hard to remember
which track you left off with--even if it's
"bookmarked" within that track.
I dunno anything about AAC, to be honest. Never used it. My plan is to split the MP3 into smaller MP3s by chapter and load them on a playlist. Of course, I will have to label them all nice and pretty. It is a long book, but you could always just load a couple of chapter files at a time. The only thing that I can see that would be kind of a pain about splitting it with the Cool MP3 is searching thru the file for each chapter and setting break points.
My only concern is how much quality I'm losing by
converting from one compressed format--MP3--to
another compressed format AAC.
Yeah. Ew. No clue. Sounds unpleasant to me. Again, I really do not do anything with AAC.
I suppose, since it's
spoken word instead of music, the change shouldn't be
too noticable. I'm not sure what kind of time frame
it'll require to convert. I'll probably try it with
book 1 first--since it's the smallest.
May depend on the program. The one I got boasts no quality loss. You may wanna scrounge around the download sites and see which one sounds like it has the best features, even if you do just get a free trial version of something. I would definitely read the editor's ratings. I tend to trust that more than the typical end user's. They show how many stars the editor gives a product, and you can click that for the review, or sometimes they have labeled tabs where you can access the review.
As for how long it takes me to rip that particular file and if that actually fixes the scrubbing problem, I will have to let you know tomorrow. WAAAAY past my bedtime!
Keep me updated on your end. I sure which that there
was an explanation for why it happens.
Will do! I am thinking you hit the nail on the head with the length. That was exactly what popped into my mind when I figured out what the goofy thing was doing.
Talk to you later!
HP dv5117d, iTunes 7.0.2.16 Windows XP Pro 1st gen 4GB nano, sw ver 1.3

JDBC initialize failed due to long idling time

Hi gurus
Anyone having similar problem and would like to share their solution for the problem stated below.
Normally the integration for IDOC-XI-JDBC scenarios is working fine, but when the R3 halt sending IDOC to XI, the JDBC connection to MS SQL 2000 server failed to process and initialise due to long idling time. Currently the temporary solution is to go to XI change the Integration Directory : Communication Channel for the JDBC - Activate - Clear Cache. Then go to R3, retrigger the IDOC again. And the above problem will be resolved. But after a while (long idling time again), this problem arise once again.
2008-10-21 15:18:45     Success     Message successfully received by messaging system. Profile: XI URL: http://locahost:50600/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2008-10-21 15:18:45     Success     Using connection JDBC_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2008-10-21 15:18:45     Success     Message successfully put into the queue.
2008-10-21 15:18:45     Success     The message was successfully retrieved from the receive queue.
2008-10-21 15:18:45     Success     The message status set to DLNG.
2008-10-21 15:18:45     Success     Delivering to channel: CC_IDOC_TO_DBMS_ESMS_588
2008-10-21 15:18:45     Success     MP: Entering module processor
2008-10-21 15:18:45     Success     MP: Processing local module localejbs/CallSapAdapter
2008-10-21 15:18:45     Success     Receiver JDBC adapter: processing started; QoS required: ExactlyOnce
2008-10-21 15:18:45     Error     JDBC adapter receiver channel CC_IDOC_TO_DBMS_ESMS_588 not initialized. Unable to proceed due to null
2008-10-21 15:18:46     Error     MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: JDBC Adapter configuration not initialized: null
2008-10-21 15:18:46     Error     Exception caught by adapter framework: JDBC Adapter configuration not initialized: null
2008-10-21 15:18:46     Error     Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: JDBC Adapter configuration not initialized: null.
2008-10-21 15:18:46     Success     The message status set to WAIT.
2008-10-21 15:18:46     Success     The asynchronous message was successfully scheduled to be delivered at Tue Oct 21 15:23:46 GMT+08:00 2008.
2008-10-21 15:23:46     Success     The message status set to TBDL.
2008-10-21 15:23:46     Success     Retrying to deliver message to the application. Retry: 1
2008-10-21 15:23:46     Success     The message was successfully retrieved from the receive queue.
2008-10-21 15:23:46     Success     The message status set to DLNG.
2008-10-21 15:23:46     Success     Delivering to channel: CC_IDOC_TO_DBMS_ESMS_588
2008-10-21 15:23:46     Success     MP: Entering module processor
2008-10-21 15:23:46     Success     MP: Processing local module localejbs/CallSapAdapter
2008-10-21 15:23:46     Success     Receiver JDBC adapter: processing started; QoS required: ExactlyOnce
2008-10-21 15:23:46     Error     JDBC adapter receiver channel CC_IDOC_TO_DBMS_ESMS_588 not initialized. Unable to proceed due to null
2008-10-21 15:23:46     Error     MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: JDBC Adapter configuration not initialized: null
2008-10-21 15:23:46     Error     Exception caught by adapter framework: JDBC Adapter configuration not initialized: null
2008-10-21 15:23:46     Error     Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: JDBC Adapter configuration not initialized: null.
2008-10-21 15:23:46     Success     The message status set to WAIT.
2008-10-21 15:23:46     Success     The asynchronous message was successfully scheduled to be delivered at Tue Oct 21 15:28:46 GMT+08:00 2008.
2008-10-21 15:28:46     Success     The message status set to TBDL.
Edited by: Malcolm Pang on Oct 23, 2008 11:08 AM

In the JDBC adapter , select option Disconnect From Database after Each message processing.
This will solve the process as your JDBC Database seems to be closing the connection after a particular idle time.
Regards
Bhavesh

STMS Configuration in Distributed environment

Hello ,
Is there any extra efforts involved to configure STMS in Distributed Installation (i.e ABAP CI reside on Host A & ABAP DB redide on Host B)?
In my case DEV , QA & PRD ( CI & DB ) instalaled on indivisual servers.
In STMS configuration there is no issue with DEV & QA System while distributing the STMS.
But when I distribute & try to activate the PRD System the error :
a)RFC error :
======> CPIC-CALL: 'CMACCP : rc=20
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 'prddbhost:3301' not reached
b)RFC :CALLTP_Linux also failed to connect the system
Where in DEV & QA System the RFC "CALLTP_Linux" has no issue.
The PRD CI & DB is a HA ( active - active )
Regards,
Santopsh Karadkar

In addtion :
If I move CI & DB on single host then the issue get`s resolved.
It means STMS / RFC works fine with ( active - passive scenario where it fails in active - active scenario )

Oracle 11g Fusion Middleware (11.1.1.3.0) Report Configuration Issue

Oracle 11g Fusion Middleware (11.1.1.3.0) Report Configuration Issue
=============================================
Hi All,
I have installed Oracle 11g Fusion Middleware (11.1.1.3.0) on Oracle Linux 5 and getting some issues while configuring. What's happening is that when I run my report, it looks for the library attached to it. If I define the REPORTS_PATH in reports.sh, it works fine.
What I want to achieve is to push reports to use REPORTS_PATH environment variable from rwserver.conf instead of reports.sh
Someone told me to remove the REPORTS_PATH from reports.sh and add the REPORTS_PATH from reports.sh to a default.env in rwserver.conf, but it didn't worked.
What I know about the report server stuff in 11g Fusion Middleware is that it consists of two different servers (Standalone and In Process). Our application runs report using SRW.RUN_REPORT which basically use In Process report server setting in rwserver.conf to run the report.
The heirarchy in which reports try to look for the REPORTS_PATH is
1) REPORTS.sh
2) rwserver.conf
3) Settings as per Oracle Enterprise Manager Configuration Settings.
My standalone report server name is ReportsServer_hostname_asinst_F and the In Process Server name is rep_wls_reports_hostname_asinst_frd. When I define rep_wls_reports_hostname_asinst_frd (In process Report Server Name) for the server name parameter, I do not get any results for the report run using srw.run_report. Also I can't see the reason behind the report executed because of the following issue
http://hostname:8888/reports/rwservlet/showjobs?server=rep_wls_reports_hostname_asinst_frd
REP-51019: System user authentication is missing.
** the Singlesignon in rwservlet.properties is defined as no
But when I define ReportsServer_hostname_asinst_F (Standalone Report Server Name) as server parameter and ran the report using srw.run_report, I get result with the REPORTS_PATH defined in reports.sh not using rwserver.conf file.
http://hostname:8888/reports/rwservlet/showjobs?server=ReportsServer_hostname_asinst_F
(which shows the report just run).
Can someone who did Report Server configuration using ENV files (changing rwserver.conf), pls. send me the screenshots. Want to make sure if I am changing the correct files under correct location.
Pls. feel free to ask me questions related to the environment set up.
Thanks

Your question belongs in {forum:id=84}
John

EM Configuration issue.

I have installed grid agent on different server. When i ran emctl status agent i am getting below error.
EM Configuration issue. /u01/app/oracle/product/10g/hostname.com_ORCL.
OS is AIX
Thanks in advance...

I am in AGENT_HOME.You are under Agent installation that's one thing. You also need to make sure your environment variable ORACLE_HOME point to AGENT_HOME not the database installation.

OC4J Configuration issue Oracle 11g R2 Windows XP and Windows 7

Hallo!I have installed Oracle Database 11.2.0.1.0 on both Windows XP and Windows 7 on 2 different machines.
Before installing on both OSs,I had installed Microsoft Loopback Adapter and had set hostname as JOEY-PC and IP address 192.168.0.X.Once the installations were complete and I restarted the machines,I could not start OEM and the error below appears
C:\Documents and Settings\JOEY>emctl start dbconsole
OC4J Configuration issue. C:\app\JOEY\product\11.2.0\dbhome_1/oc4j/j2ee/OC4J_DBConsole_JOEY-PC_orcl not found.
When I went to the C:\app\JOEY\product\11.2.0\dbhome_1\oc4j\j2ee directory,I found the folder OC4J_DBConsole_localhost_orcl instead of OC4J_DBConsole_JOEY-PC_orcl.
I assumed that by using Microsoft Loopback Adapter,I would avoid the error above and that the OC4J_DBConsole folder would permanently remain as OC4J_DBConsole_JOEY-PC_orcl instead of OC4J_DBConsole_localhost_orcl.
Why is this folder changing its name and how can I resolve this issue?
Thanks.

Pl post the contents of the file C:\WINDOWS\System32\drivers\etc\hosts on both servers
What steps did you take to set the hostname to JOEY-PC ?
Srini

STMS configuration for transports

We have a landscape of 3 systems in version 4.7 ext 110. We cuurently perform the transport activity at the operating system level, with tp commands. We have to move to STMS transactions because we no longer will have access to operating system.
The DEV system client is 040 and the QAS and PRD system clients are 010. In STMS, it is currently not possible to provide client information for an import.
Can anybody explain why it is not possible and how to fix this issue ?
Best regards
Daniel

Dear Danial,
Please do these steps
1.Request moving one client to another client u can use scc1
2.Another method is u can add the request in stms_import t-code >go to>extra>add-->request.
3.Then it will come on list.
4.Now go to login stms_import click>truk ickon>import qoue
after that u check reply,for furthur any help let me know.
Regards,
K.Ramamoorthy

STMS configuration in EHP4

Hi Guys...........
We have installed EHP 4 SP 5 and configured STMS for 2 system landscape taking one system as virtual.But our function consultants are having issues when uploading Master data.they say that Transport Requests are being generated (actually they shud not be generated ).
I have checked all client settings and system settings.
Is there any different STMS configuration needed for EHP 4 ???????
Please any one suggest....
Regards,
sandhya.

In addtion :
If I move CI & DB on single host then the issue get`s resolved.
It means STMS / RFC works fine with ( active - passive scenario where it fails in active - active scenario )

STMS configuration issue due to LONG hostname

Similar Messages

Maybe you are looking for