STMS import of transport
Hi Guys,
I'm trying to import a transport during upgrade from dev to quality. I need to have it in 005 quality.
1) Is it necessary to login to the target client 005 or can I directly login to 000 and select target client 005 ?
2) Is it necessary to always import changes in all the clients ?
3) After clicked on the import icon (truck), I select (F4) to see available options for clients. When I do that, it asks me to login to the target client. What might be the problem ? Is some RFC destination configured incorrectly or some parameter ?
Hi,
You must login to the Target client 005 to import the request and clicking the import icon you have select the target client from the list or you may manually enter the client no .
You must enter in to the Target client and import the Request.,
Regards
Arun
Similar Messages
-
STMS problem with transport import
Hello all
I had a problem with transports in STMS.
Log history of imported transport didn't show any error and simophore is green.
But in target system data element wasn't presented.
When i import this transport again - it's all ok.
It happened twice. And i didn't find any solutions yet.((
Did anyone have the same problem???Start import LIMUMETH/NPQ/CL_RESERVATION SPLIT_RESERV ...
0 entries from SMODILOG (CLAS/NPQ/CL_RESERVATION METH/NPQ/CL_RESERVATION SPLIT_RESERVATION
0 entries from SMODISRC (CVCLAS/NPQ/CL_RESERVATION METH/NPQ/CL_RESERVATION SPLIT_RESERVATION
0 entries from SMODISRC (CUCLAS/NPQ/CL_RESERVATION METH/NPQ/CL_RESERVATION SPLIT_RESERVATION
0 entries from SMODISRC (PRCLAS/NPQ/CL_RESERVATION METH/NPQ/CL_RESERVATION SPLIT_RESERVATION
0 entries from SMODISRC (SVCLAS/NPQ/CL_RESERVATION METH/NPQ/CL_RESERVATION SPLIT_RESERVATION
0 entries from SMODISRC (CICLAS/NPQ/CL_RESERVATION METH/NPQ/CL_RESERVATION SPLIT_RESERVATION
method SPLIT_RESERVATION include /NPQ/CL_RESERVATION===========CM01Z will be impor
REPOS /NPQ/CL_RESERVATION===========CM01M A replaced.
End of import LIMUMETH/NPQ/CL_RESERVATION SPLIT_RESERV
E071-LOCKFLAGs 000016 - 000016 updated ('2', 1 entries).
E071C entries 000016 - 000016 deleted (1 entries).
report /NPQ/CL_RESERVATION===========CM01M (L) synchronized.
report /NPQ/CL_RESERVATION===========CP (L) synchronized.
169836 5330910
LIMUTABD/NPQ/LOCATION_HIERARCHY_QRY was not imported in this step
LIMUTABD/NPQ/RESERV_ROOM_SERVICE_STR was not imported in this step
LIMUTABD/NPQ/RES_SERVICE was not imported in this step
LIMUTABD/NPQ/RES_SERVICE_DETAILS was not imported in this step
Start import LIMUWAPP/NPQ/FM SERVICE/CREA ...
Start import LIMUWAPP/NPQ/FM SERVICE/CREA ...
Start import LIMUWAPP/NPQ/FM SERVICE/GETS ...
Start import LIMUWAPP/NPQ/FM_NEW_DESIGN SERVICE/CREA ...
Start import LIMUWAPP/NPQ/FM_NEW_DESIGN SERVICE/GETS ...
0 entries from SMODILOG (WAPA/NPQ/FM_NEW_DESIGN WAPP/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCATIO
0 entries from SMODISRC (CVWAPA/NPQ/FM_NEW_DESIGN WAPP/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCAT
0 entries from SMODISRC (CUWAPA/NPQ/FM_NEW_DESIGN WAPP/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCAT
0 entries from SMODISRC (PRWAPA/NPQ/FM_NEW_DESIGN WAPP/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCAT
0 entries from SMODISRC (SVWAPA/NPQ/FM_NEW_DESIGN WAPP/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCAT
0 entries from SMODISRC (CIWAPA/NPQ/FM_NEW_DESIGN WAPP/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCAT
0 d / 0 i / 2 u / 1 = 33% ucf O2PAGCON
3 entries for O2PAGCON imported (TR/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 d / 0 i / 1 u / 0 = 0% ucf O2PAGDIR
1 entry for O2PAGDIR imported (/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 d / 0 i / 0 u / 4 = 100% ucf O2PAGDIRT
4 entries for O2PAGDIRT imported (/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 d / 0 i / 0 u / 1 = 100% ucf O2PAGEVH
1 entry for O2PAGEVH imported (/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 entries from O2PAGPAR (/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCATIONHIERARCHY %) d
0 entries from O2PAGPAR (/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCATIONHIERARCHY %) d
0 entries from O2PAGPART (/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCATIONHIERARCHY %)
0 entries from O2PAGPART (/NPQ/FM_NEW_DESIGN SERVICE/GETSRVPOINTLOCATIONHIERARCHY %)
0 entries from SOTR_USE (LIMUWAPP/NPQ/FM#_NEW#_DESIGN SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 entries from SOTR_USE (LIMUWAPP/NPQ/FM#_NEW#_DESIGN SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 entries from SOTR_USEU (LIMUWAPP/NPQ/FM#_NEW#_DESIGN SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 entries from SOTR_USEU (LIMUWAPP/NPQ/FM#_NEW#_DESIGN SERVICE/GETSRVPOINTLOCATIONHIERARCHY
End of import LIMUWAPP/NPQ/FM_NEW_DESIGN SERVICE/GETS
R3TRDTEL/NPQ/DELIVERY_POINT was not imported in this step
R3TRDTEL/NPQ/SRV_POINT was not imported in this step
E071-LOCKFLAGs 000021 - 000025 updated ('2', 5 entries).
E071C entries 000021 - 000025 deleted (5 entries).
DEVK902177 touched.
table O2PAGDIR (R) synchronized.
1 tables in P-buffer synchronized.
2 tables in R-buffer synchronized.
42832 5373742
158359 bytes read.
Transport overhead 15.3 %.
Data compressed to 5.3 %.
Duration: 14 sec (11311 bytes/sec).
1 0
Summary:
15 REPOS imported.
Totally 15 Objects imported.
Totally 1551 tabentries imported.
5373742 bytes modified in database.
[dev trc ,00000] Thu Mar 03 18:26:16 2011 13410099 13.410099
[dev trc ,00000] Disconnecting from ALL connections: 21 13.410120
[dev trc ,00000] Disconnecting from connection 0 ... 33 13.410153
[dev trc ,00000] Now I'm disconnected from SAP DB 4897 13.415050
[dev trc ,00000] Disconnected from connection 0 63 13.415113
[dev trc ,00000] statistics db_con_commit (com_total=17, com_tx=17) 26 13.415139
[dev trc ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0) 25 13.415164
Disconnected from database.
End of Transport (0000).
date&time: 03.03.2011 - 18:26:16
Main import
End date and time : 20110303182616
| Ended with return code: ===> 0 <=== -
Error when importing a Transport request in CHARM???
Hi all,
when i am trying to import a transport a request( thru CHARM) , its throwing an error " No valid system specified (Q11)" and "Import error: Check TMS Alert Viewer in target system"
Note::I was able to create a Transport request , release it but facing problem while importing to quality system.development system is ECC5.0 and quality is ECC6.0
rgds,
AnandHI abhi,
i havecreated the domain link, my ECC5.0 and ECC6.0 are in one domain of which ECC5.0 is domain controller,now i configured Solution manager as new domain controller and created a link between these two domains...
now my queries are:
1.is it enuf if i create a link between or even shud i create som transport routes between the newly added system from other domain and the existing domain
2.i am not able to see the STMS configuration in solution manager system.ie in my ECC5.0 system( domain ctrller)if i goto STMS->Overview menu-> transport routes i see the configuration, which i cannot see by logging into solution manager and wentto STMS->Overview menu-> transport routes i dont see
rgds,
Anand -
STMS Import queue Fails - FTP_FAILED
Hi All
Stms import queue fails with the following error message
System BWP Command TMS_MGR_TRANSMIT_TR_QUEUE
Client 001 Service Transport Service
User SAPBASIS Start Online
Date 14.05.2009 Function TMS_TP_ADD2BUFFER
Time 11:48:34 Message FTP_FAILED
Source file could not be opened
long text
========
An error occurred when opening the source file for reading.
File name: R901010.BWE
Directory: $TR_DATA
Error code: 16
Definition of the error codes:
03 RFC system failure
04 RFC communication failure
11 invalid EPS subdirectory
12 sapgparam failed
13 build directory failed
14 no authorization
15 build path failed
16 open failed
17 read directory failed
18 read attributes failed
System Response
Transmission was terminated.
Procedure
Eliminate the cause of the error and restart the transmission
==========
suggesstions please
Edited by: Harendranath Medarametla on May 14, 2009 11:59 AMHi Saurabh,
I am able to FTP files manually between servers.
START TRANSMIT BUFFER ENTR BWP g 20090511092623 TMSADM smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090511092638 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090512152143 MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512152159 MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g 20090512152251 TMSADM smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512152307 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090512152321 MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512152338 MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g 20090512171040 TMSADM smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512171056 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090512171405 TMSADM smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512171421 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090512171429 MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512171446 MEDARAMETLAH smuc021
START CMDIMPORT BWP L 20090512172121 MEDARAMETLAH smuc021 20090512172120681
STOP CMDIMPORT BWP L 20090512172123 MEDARAMETLAH smuc021 20090512172120681
START MAIN IMPORT BWP I 20090512172124 MEDARAMETLAH smuc021 20090512172123291
STOP MAIN IMPORT BWP I 20090512172139 MEDARAMETLAH smuc021 20090512172123291
START CMDIMPORT BWP L 20090512172139 MEDARAMETLAH smuc021 20090512172139056
STOP CMDIMPORT BWP L 20090512172343 MEDARAMETLAH smuc021 20090512172139056
START CREATE VERSIONS BEFO BWP w 20090512173112 MEDARAMETLAH smuc021
START tp_getprots BWP W 20090512173112 MEDARAMETLAH smuc021
STOP tp_getprots BWP W 20090512173322 MEDARAMETLAH smuc021
STOP CREATE VERSIONS BEFO BWP w 20090512173322 MEDARAMETLAH smuc021
START DD IMPORT BWP H 20090512173623 MEDARAMETLAH smuc021 20090512173622926
STOP DD IMPORT BWP H 20090512173855 MEDARAMETLAH smuc021 20090512173622926
START DD ACTIVATION BWP A 20090512173905 MEDARAMETLAH smuc021
START tp_getprots BWP J 20090512173905 MEDARAMETLAH smuc021
STOP tp_getprots BWP J 20090512174100 MEDARAMETLAH smuc021
STOP DD ACTIVATION BWP A 20090512174100 MEDARAMETLAH smuc021
START imp all BWP 20090512174101 MEDARAMETLAH smuc021 20090512174100971
INFO: event SAP_IMPORT_START triggered successfully
START CMDIMPORT BWP L 20090512174102 MEDARAMETLAH smuc021 20090512174100971
STOP CMDIMPORT BWP L 20090512174102 MEDARAMETLAH smuc021 20090512174100971
START DD IMPORT BWP H 20090512174103 MEDARAMETLAH smuc021 20090512174100971
STOP DD IMPORT BWP H 20090512174103 MEDARAMETLAH smuc021 20090512174100971
START DISTRIBUTION OF DD-O BWP S 20090512174103 MEDARAMETLAH smuc021 20090512174100971
START tp_getprots BWP S 20090512174103 MEDARAMETLAH smuc021 20090512174100971
STOP tp_getprots BWP S 20090512174118 MEDARAMETLAH smuc021 20090512174100971
STOP DISTRIBUTION OF DD-O BWP S 20090512174118 MEDARAMETLAH smuc021 20090512174100971
INFO TBATG CONVERSION OF BWP N not needed MEDARAMETLAH smuc021 20090512174100971
START MOVE NAMETABS BWP 6 20090512174118 MEDARAMETLAH smuc021 20090512174100971
START tp_getprots BWP P 20090512174118 MEDARAMETLAH smuc021 20090512174100971
STOP tp_getprots BWP P 20090512174223 MEDARAMETLAH smuc021 20090512174100971
STOP MOVE NAMETABS BWP 6 20090512174223 MEDARAMETLAH smuc021 20090512174100971
START MAIN IMPORT BWP I 20090512174224 MEDARAMETLAH smuc021 20090512174100971
STOP MAIN IMPORT BWP I 20090512204043 MEDARAMETLAH smuc021 20090512174100971
START TBATG CREATION OF EN BWP n 20090512204043 MEDARAMETLAH smuc021 20090512174100971
START tp_getprots BWP Y 20090512204043 MEDARAMETLAH smuc021 20090512174100971
STOP tp_getprots BWP Y 20090512204053 MEDARAMETLAH smuc021 20090512174100971
STOP TBATG CREATION OF EN BWP n 20090512204053 MEDARAMETLAH smuc021 20090512174100971
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all BWP 0004 20090512204055 MEDARAMETLAH smuc021 20090512174100971
START EXECUTION OF REPORTS BWP R 20090512204200 MEDARAMETLAH smuc021
START tp_getprots BWP R 20090512204200 MEDARAMETLAH smuc021
STOP tp_getprots BWP R 20090512205837 MEDARAMETLAH smuc021
STOP EXECUTION OF REPORTS BWP R 20090512205837 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205840 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205840 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205840 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205840 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205840 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205841 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205841 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205841 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205841 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205842 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205842 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205842 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205842 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205842 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205843 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205843 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205843 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205843 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205844 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205844 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205844 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205844 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205844 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205845 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205845 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205845 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205845 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205846 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205846 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205846 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205846 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205846 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205847 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205847 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205847 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205847 MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513095342 MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513095359 MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513095701 TMSADM smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513095718 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513095723 MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513095740 MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513100151 TMSADM smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513100208 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513100213 MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513100231 MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513100238 TMSADM STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513103804 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513103833 MEDARAMETLAH START TRANSMIT BUFFER ENTR BWP g 20090513115655 MEYERA smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513115713 MEYERA smuc021
INFO: Buffer saved as
smuc021\sapmnt\trans\buffer\BWPSAV.
======================
also please see the error when i try to connect using TP command in os
This is tp version 372.04.40 (release 700, unicode enabled)
Connection to Database of BWP was successful.
This is R3trans.exe version 6.14 (release 700 - 16.10.08 - 16:26:00).
unicode enabled version
2EETW152 Cannot open file "
SMUC013\sapmnt\trans\tmp\C090514.BWP".
R3trans.exe finished (0012).
SMUC013\sapmnt\trans\log\C090514.BWP for transport: ALL: Permission denied
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (1)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (1), I'm waiting 1
sec (20090514174859). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (2)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (2), I'm waiting 3
sec (20090514174900). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (3)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (3), I'm waiting 1
sec (20090514174903). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (4)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (4), I'm waiting 5
sec (20090514174904). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (5)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (5), I'm waiting 3
sec (20090514174909). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (6)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (6), I'm waiting 3
sec (20090514174912). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (7)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (7), I'm waiting 2
sec (20090514174915). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (8)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (8), I'm waiting 5
sec (20090514174917). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (9)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (9), I'm waiting 5
sec (20090514174922). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (10)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (10), I'm waiting
4 sec (20090514174927). My name: pid 4340 on smuc021 (bwpadm)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC: Permission denied
PANIC --> exiting
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0212
tp finished with return code: 212
meaning:
could not access file as supposed (see dev_tp or SLOG0920.BWP for more details
I have 4 system lanscape but other systems dont have this problem, even i have not maintained any permissions.
regards
hari -
How to import the transports from the SAP Integration Kit into SAP system
Hi expert,
I read the forum "Re: Integration with SAP R/3 to realise i have not done the import of transport but i don't quite understand the statement give by "Sebastian Li".
"Unpack the SAP Integration Kit zip-file. It contains a transport-folder. Here you'll find a short manual which files you should import.
Copy the needed files on your sap-system in the correct folders:
- usr\sap\trans\cofiles
- usr\sap\trans\data
Use the transaction STMS.
Also take care of the sequence of importing. See the manual for details."
Can some one explain it in more details to me. I have unzip the SAP Integration Kit n in the transport folder got 2 more folder "ansi" and "unicode_compatible". How do i know which 1 to use? Where i should copy this files to?
Please advice.
thank youHi Rajesh,
check this : logon failed. you do not have the necessary rights to design reports
@Sri -
Steps needed to import the transport request
Hello SAP gurus
I am trying to import a transport request consisting of a packacge into a server. I was able to create this transport request on first server and trying to import it into second server.
I read many postings on this site and played with STMS_IMPORT, STMS etc.,
But still can't see the package on the second server.
I don't know what I need to do on the second server (target) to make it accept this foreign transport request.
If some one can please point me to a link or document that gives the exact steps involved to do this, I would appreciate it a lot.
Thanks
Ramthanks sudhi
but i couldn't find the area allocated for basis related questions.
when i goto forums, i see only the following
Business Process Expert Application Server Community User Groups
Service-Oriented Architecture (SOA) ABAP Development Integration and Certification Center (ICC)
SAP Solutions Emerging Technologies Chinese: 中文论坛 / 中文論壇
SAP Business One Scripting Languages Japanese: 日本語フォーラム
SAP NetWeaver Business Objects Korean: 한국어 포럼
Database & OS Platforms Business Objects SDK Application Development Portuguese: Português
Portal Crystal Reports, Xcelsius and Interactive Analysis Spanish: Español
Business Intelligence University Alliances Business By Design
Industries Community Discussions
Any other suggestions will be highly appreciated.
Tks
Ram -
HI all,
Think some body deleted TR request (or something happend in the import queue) from the import queue, from that day onwards there was no transports are going on from development to quality systems. is there any chance to rebuild import queues, it was a problem in STMS imports.
pls help me.
cheers,Did you refresh the list with refresh button?
If yes, check release log of that particular transport.
Hope it helps.
Regards -
Setting Target Client in STMS- Import Queue
After restoring Db,we has some issues in Transport Routes so deleted and added the child system to Transport Domain Controller.
After adding the system, if we go to STMS->Import Overview-> QAS ( system queue name )-> here it asking to set the target client.
My issue is..when i click on " Set Target Client", it is ready to import all the transports...
Can i exclude importing all the transports and set the target client ?
Thank youHi NIA,
As mentioned by Sunny, you just have to add the NEW QAS system in the Domain.
Go to transport routes and then from "Configuration"-> "Adjust with Controller".
This will adjust the system with the Domain Controller.
Regards,
Anuj -
Import released transports to the qa system
Hi Experts,
I have released transports of couple of programs from dev system to QA system, I need to imports these transports in the QA system.
So Can anyone suggest me how to do it, as i know tcode SCC1 and STMS these are involved in it.
Any help will be of great help.
Thanks,
Prabs.Hi Ville,
I have only two systems, sysA and sysB, sysB is used for testing, and sysA for developement.
See i had a pgm and fm with two seperate transports, and i released the transports, it was successful. in se01 it displays for the trans1 completed successfully and also for trans2.
Now in sysB it is not available where should i do the imports in sysA or sysB i am confused. In sysA if i go to stms and select the for import nothing comes up.
only in sysB in stms for navigation to import it displays a number realeased transports, but the onewhich i released is not available. Is there any problem.
Or what is the issue.
Thanks,
Prabs. -
HOW TO IMPORT A TRANSPORT REQUEST AT OS LEVEL IN HP-UNIX PLATFORM?
HOW TO IMPORT A TRANSPORT REQUEST AT OS LEVEL IN HP-UNIX PLATFORM?
Dear Pavan,
When you exporting the transport request via TCODE Se01/SE09/SE10 two files are created at the OS level in Data and Cofiles folder residing in E:\usr\sap\trans.If you open these files you will see your exported request number You need to copy your reqest from the development server OS and then go to the Quality /Production OS and open the same folder E:\usr\sap\trans and paste it into the respective Datafiles and Cofiles folder.
If will surely work.
PS: I recommend not to do this way.Use tcode STMS for importing
Note: Users must be kept away from the application and database server.Hence they work on presentation server which is our GUI workstation.
Reward if hepful and your query is resolved.
Regards,
Ashutosh -
About How to delete STMS - imports- goto- history- import history log
Hi guys:
How to delete STMS ->imports->goto->history->import history log ?Hi,
Sap recommends:
Use
Over time, a large number of potentially large files can accumulate in the subdirectories cofiles, data, and log of the global transport directory. These contain important information, but they also require space and become obsolete.
Procedure:
To generate a list of all deletable files in these directories, enter the command tp check all. Files are considered deletable when the accompanying request is not marked for import into an SAP System. The list that is generated is stored as the check.log log file in the tmp subdirectory and can be read.
If you want to test the command tp clearold all, enter the command tp testold all. tp testold all simulates the actions performed by tp clearold all and writes the results to the file testold.log. This file is in the subdirectory tmp. The log file contains details of the actions of tp clearold all when cleaning up the transport directory.
To delete files from the subdirectories cofiles, log, and olddata, and to move files from the subdirectory data to the subdirectory olddata, enter the command tp clearold all. (This command works using the list generated in step 1.) The tp clearold all command writes the results to the clearold.log log file. This file is located in the tmp subdirectory.
For more information on the parameters for these commands, see Transport Profile. To get the current values, use the command tp showparams <sapsid>.
You do not need a connection to the database to execute the commands that are mentioned above. The function is independent of the installed SAP R/3 release.
Pl follow the link http://help.sap.com/saphelp_47x200/helpdata/en/3d/ad5d384ebc11d182bf0000e829fbfe/frameset.htm.
Hope this fulfils your need.
Pl award suitably.
Regards -
How to import external Transport request into sap system
Hi Gurus,
I have Transport request in the cofiles and data files into one sap system
how to import those files into another sap system (those are different sap systems)
could u tel anyone any settings is required and how to import Those Transport request.
Any help is appreciated.
Thanks in AdvanceHi Siva,
After copied the datafile and cofile in the target system go to Tcode STMS> select the target system import queue,there you go to menu extras>other request-->add, give the request no and excute it.
It will put the request in the que then you can import it to the target system.
Thanks,
Satyabrat -
Custom program to release/importa a transport request
Hi all.
I was searching the forum but I didn't found any post. Well, this is my issue: I want to create a program that can do all the transport steps: release a transport request and import this transport request in another system.
When I say "another system" I'm talking about SAP systems in the same transport route: Development --> Test --> Prod.
I didn't found any Function Module or BAPI to do this process. Any idea? I think there will be a FM/BAPI to release a transport request and another to do the import in target system.
Thanks in advance. Regards,
Roberto CampoHello,
To do the release : TMS_TP_EXPORT
To do the import : TMS_TP_IMPORT
For the rest check function modules in function group TMST in tcode SE80.
I don't understand why you want such a program.
Importing transports can be automated via STMS (example automatic import every 10 minutes), then you don't need to write your own program, because after release of your transport, transport comes in the QA import queue and will be imported via the automatic job.
Success.
Wim -
Stms Import Refresh Display Screen
Hello,
I want to automatically refresh diplay screen of stms import screen. i made a configuration extras personal settings update
display automatically but nothing changed. how can i do?what exactly you are looking for? do you want to know whether the transport imported or not? instead of refreshing the queue? If this is the case then I suggest you can use synchronous option while importing the transport.
-
Error while importing a transport request
Hi,
I installed two SAP ECC6 EHP6 IDES sytems and created a transport route between them.
When I try to import a Transport request I get the following error:
HALT: inconsistent preview tables E071K_STR (size=344) and E071KS_PREVIEW (size=128)
Please help me find a solution to this problem.Hello Occoro,
There are multiple steps you need to do, I am not sure if the following note is applicable to your version of SAP.
1730009 - Import queue does not work
Downloading R3trans and tp is similar to downloading kernel.
Download the versions relevant to your SAP Kernel 7.20, the latest patch should be available at http://service.sap.com/swdc
In the same area where you get SAP Kernels, you should be able to get files such as:
R3trans_xxx-xxxxxx.SAR
tp_xxx-xxxx.SAR
Download these files, uncar them to your kernel directory typically /sapmnt/<SID>/exe
Refer to the following note for more details:
19466 - Downloading SAP kernel patches
Good luck.
Regards,
Siddhesh
Maybe you are looking for
-
Web browser activex control could not be loaded in compiled exe
Hi everyone. I just met this issue again. Previously I solved this issue by registering the mscomctl.ocx, nicont.dll, nicontdt.dll in version 7.1. Now we are using 8.5.2, and the problem came up again. I've tried the following: 1. use the latest nico
-
Moving CS6 and Lightroom 4 to new computer
Is there a way to install upgrade versions of Photoshop CS6 and Lightroom 4 onto a newly purchased computer without having to reinstall all previous versions. I have been upgrading Photoshop since CS3 and Lightroom since Lightroom 2. What a pain if I
-
We are using report RPLINFC0 to display all the infotypes maintained against an employee. Client wants this report for a range of Personnel numbers. Is there any standard report which displays all the infotypes maintained against a range of Personnel
-
Partial collection Failure for nexus 5548UP in PI 2.1
Hi there, I get "Partial Collection Failure" in the inventory collection status in Prime Infrastructure for all my Nexus 5548UP (8 devices). i have seen in the PI 2.1 release notes that a bug CSCum16230 which look like my problem has been resolved i
-
I'm losing my downloads in software udater!!
I have been trying to download the new Mac OSX udate (10.4.8) which is 147mb, and it keeps getting to 100 and then disconecting/erroring and then when i try again its back to 0 percent, i have to start all over!! I'm only on a normal dial up connecti