STMS - Import Queue not updating
Hi,
I'm hoping for a little guidance to track down a problem.
We have a simple 3 system configuration (DEV > QAS > PROD) and we're currently about 2 months away from going live with the Production box.
However, the STMS import queue for Production hasn't updated since 13/09. It's status is "Data obsolete or missing".
Being a bit of a novice, I'm not sure where to start to try track down why, after 12 months, this queue has stopped updating.
Any help would be appreciated.
Thanks
If the queue is not been updated the most likely scenario is that it can't read the trasnport directory or the STMS config is not maintained properly... what happen when you try to refresh the queue?... any errors?, Check the system status in the domain controller if theres an issue try to redistribute.
Regards
Juan
Similar Messages
-
STMS Import queue Fails - FTP_FAILED
Hi All
Stms import queue fails with the following error message
System BWP Command TMS_MGR_TRANSMIT_TR_QUEUE
Client 001 Service Transport Service
User SAPBASIS Start Online
Date 14.05.2009 Function TMS_TP_ADD2BUFFER
Time 11:48:34 Message FTP_FAILED
Source file could not be opened
long text
========
An error occurred when opening the source file for reading.
File name: R901010.BWE
Directory: $TR_DATA
Error code: 16
Definition of the error codes:
03 RFC system failure
04 RFC communication failure
11 invalid EPS subdirectory
12 sapgparam failed
13 build directory failed
14 no authorization
15 build path failed
16 open failed
17 read directory failed
18 read attributes failed
System Response
Transmission was terminated.
Procedure
Eliminate the cause of the error and restart the transmission
==========
suggesstions please
Edited by: Harendranath Medarametla on May 14, 2009 11:59 AMHi Saurabh,
I am able to FTP files manually between servers.
START TRANSMIT BUFFER ENTR BWP g 20090511092623 TMSADM smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090511092638 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090512152143 MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512152159 MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g 20090512152251 TMSADM smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512152307 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090512152321 MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512152338 MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g 20090512171040 TMSADM smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512171056 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090512171405 TMSADM smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512171421 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090512171429 MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090512171446 MEDARAMETLAH smuc021
START CMDIMPORT BWP L 20090512172121 MEDARAMETLAH smuc021 20090512172120681
STOP CMDIMPORT BWP L 20090512172123 MEDARAMETLAH smuc021 20090512172120681
START MAIN IMPORT BWP I 20090512172124 MEDARAMETLAH smuc021 20090512172123291
STOP MAIN IMPORT BWP I 20090512172139 MEDARAMETLAH smuc021 20090512172123291
START CMDIMPORT BWP L 20090512172139 MEDARAMETLAH smuc021 20090512172139056
STOP CMDIMPORT BWP L 20090512172343 MEDARAMETLAH smuc021 20090512172139056
START CREATE VERSIONS BEFO BWP w 20090512173112 MEDARAMETLAH smuc021
START tp_getprots BWP W 20090512173112 MEDARAMETLAH smuc021
STOP tp_getprots BWP W 20090512173322 MEDARAMETLAH smuc021
STOP CREATE VERSIONS BEFO BWP w 20090512173322 MEDARAMETLAH smuc021
START DD IMPORT BWP H 20090512173623 MEDARAMETLAH smuc021 20090512173622926
STOP DD IMPORT BWP H 20090512173855 MEDARAMETLAH smuc021 20090512173622926
START DD ACTIVATION BWP A 20090512173905 MEDARAMETLAH smuc021
START tp_getprots BWP J 20090512173905 MEDARAMETLAH smuc021
STOP tp_getprots BWP J 20090512174100 MEDARAMETLAH smuc021
STOP DD ACTIVATION BWP A 20090512174100 MEDARAMETLAH smuc021
START imp all BWP 20090512174101 MEDARAMETLAH smuc021 20090512174100971
INFO: event SAP_IMPORT_START triggered successfully
START CMDIMPORT BWP L 20090512174102 MEDARAMETLAH smuc021 20090512174100971
STOP CMDIMPORT BWP L 20090512174102 MEDARAMETLAH smuc021 20090512174100971
START DD IMPORT BWP H 20090512174103 MEDARAMETLAH smuc021 20090512174100971
STOP DD IMPORT BWP H 20090512174103 MEDARAMETLAH smuc021 20090512174100971
START DISTRIBUTION OF DD-O BWP S 20090512174103 MEDARAMETLAH smuc021 20090512174100971
START tp_getprots BWP S 20090512174103 MEDARAMETLAH smuc021 20090512174100971
STOP tp_getprots BWP S 20090512174118 MEDARAMETLAH smuc021 20090512174100971
STOP DISTRIBUTION OF DD-O BWP S 20090512174118 MEDARAMETLAH smuc021 20090512174100971
INFO TBATG CONVERSION OF BWP N not needed MEDARAMETLAH smuc021 20090512174100971
START MOVE NAMETABS BWP 6 20090512174118 MEDARAMETLAH smuc021 20090512174100971
START tp_getprots BWP P 20090512174118 MEDARAMETLAH smuc021 20090512174100971
STOP tp_getprots BWP P 20090512174223 MEDARAMETLAH smuc021 20090512174100971
STOP MOVE NAMETABS BWP 6 20090512174223 MEDARAMETLAH smuc021 20090512174100971
START MAIN IMPORT BWP I 20090512174224 MEDARAMETLAH smuc021 20090512174100971
STOP MAIN IMPORT BWP I 20090512204043 MEDARAMETLAH smuc021 20090512174100971
START TBATG CREATION OF EN BWP n 20090512204043 MEDARAMETLAH smuc021 20090512174100971
START tp_getprots BWP Y 20090512204043 MEDARAMETLAH smuc021 20090512174100971
STOP tp_getprots BWP Y 20090512204053 MEDARAMETLAH smuc021 20090512174100971
STOP TBATG CREATION OF EN BWP n 20090512204053 MEDARAMETLAH smuc021 20090512174100971
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all BWP 0004 20090512204055 MEDARAMETLAH smuc021 20090512174100971
START EXECUTION OF REPORTS BWP R 20090512204200 MEDARAMETLAH smuc021
START tp_getprots BWP R 20090512204200 MEDARAMETLAH smuc021
STOP tp_getprots BWP R 20090512205837 MEDARAMETLAH smuc021
STOP EXECUTION OF REPORTS BWP R 20090512205837 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205840 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205840 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205840 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205840 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205840 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205841 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205841 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205841 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205841 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205842 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205842 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205842 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205842 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205842 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205843 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205843 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205843 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205843 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205844 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205844 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205844 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205844 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205844 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205845 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205845 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205845 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205845 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205846 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205846 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205846 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205846 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205846 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205847 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205847 MEDARAMETLAH smuc021
START tp_rm_cntl_mark BWP 20090512205847 MEDARAMETLAH smuc021
STOP tp_rm_cntl_mark BWP 20090512205847 MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513095342 MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513095359 MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513095701 TMSADM smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513095718 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513095723 MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513095740 MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513100151 TMSADM smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513100208 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513100213 MEDARAMETLAH smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513100231 MEDARAMETLAH smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513100238 TMSADM STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513103804 TMSADM smuc021
START TRANSMIT BUFFER ENTR BWP g 20090513103833 MEDARAMETLAH START TRANSMIT BUFFER ENTR BWP g 20090513115655 MEYERA smuc021
STOP TRANSMIT BUFFER ENTR BWP g 0000 20090513115713 MEYERA smuc021
INFO: Buffer saved as
smuc021\sapmnt\trans\buffer\BWPSAV.
======================
also please see the error when i try to connect using TP command in os
This is tp version 372.04.40 (release 700, unicode enabled)
Connection to Database of BWP was successful.
This is R3trans.exe version 6.14 (release 700 - 16.10.08 - 16:26:00).
unicode enabled version
2EETW152 Cannot open file "
SMUC013\sapmnt\trans\tmp\C090514.BWP".
R3trans.exe finished (0012).
SMUC013\sapmnt\trans\log\C090514.BWP for transport: ALL: Permission denied
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (1)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (1), I'm waiting 1
sec (20090514174859). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (2)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (2), I'm waiting 3
sec (20090514174900). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (3)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (3), I'm waiting 1
sec (20090514174903). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (4)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (4), I'm waiting 5
sec (20090514174904). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (5)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (5), I'm waiting 3
sec (20090514174909). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (6)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (6), I'm waiting 3
sec (20090514174912). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (7)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (7), I'm waiting 2
sec (20090514174915). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (8)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (8), I'm waiting 5
sec (20090514174917). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (9)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (9), I'm waiting 5
sec (20090514174922). My name: pid 4340 on smuc021 (bwpadm)
Access denied on
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC (10)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC is already in use (10), I'm waiting
4 sec (20090514174927). My name: pid 4340 on smuc021 (bwpadm)
SMUC013\sapmnt\trans\tmp\SLOG0920.BWP.LOC: Permission denied
PANIC --> exiting
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0212
tp finished with return code: 212
meaning:
could not access file as supposed (see dev_tp or SLOG0920.BWP for more details
I have 4 system lanscape but other systems dont have this problem, even i have not maintained any permissions.
regards
hari -
Hi All,
I want to know if there is a way (program) that i can use to refresh the import queue in STMS automatically even when the import queue screen is not open. I am experiencing some intresting scenario and i am not sure if its normal. please let me know:
- I have recently added Sandbox system in the already existed TMS landscape. Domain links are used since Sandbox and DEV are in different network. When i release the transport in DEV its supposed to go to QAS import queue and also to Sandbox import queue in parallel. I can see them in QAS queue automatically without refreshing it, however it does not go to the Sandbox queue even after I refresh the import queue of Sanbox system (from Sandbox System). The only way It goes to the Sandbox import queue in Sandbox Queue is when I go the the Import Queue of Sandbox system in DEV system and Refresh it there. Is there normal? After I refresh import queue for Sandbox in DEV , i go to the Sandbox system and click on sandbox queue then refresh it there and it comes right through. I understand the concept of adujst the transport files by clicking the green arrow since they dont share same Central Trans Dir and i am also aware of the SAP report to perform this automatically.
-My question is, Why do is it required to refresh the import queue for Sandbox system "in DEV system" ? and is there any Report/Program that i can schedule in the Background in DEV that refreshes all import queues for all systems there even when the import screen is not open?
please suggest. thanks.I will put your question in more clear way!!
You are not able to view the transport in SANDBOX STMS(Auto refersh is active) untill you refresh from DEV STMS ...Is this ?? I dont think it should happen you are accesing the same screen from DEV or SANDBOX.
Just try what i have mentioned above
1) In sandbox select personal setting and do as per firt post
2) Release any request in DEV (Dont open STMS in DEV system )
3) Check if transport is available in SANDBOX STMS(Login to SANDBOX only)
Paste here the observations....
Regards, -
HI all,
Think some body deleted TR request (or something happend in the import queue) from the import queue, from that day onwards there was no transports are going on from development to quality systems. is there any chance to rebuild import queues, it was a problem in STMS imports.
pls help me.
cheers,Did you refresh the list with refresh button?
If yes, check release log of that particular transport.
Hope it helps.
Regards -
Setting Target Client in STMS- Import Queue
After restoring Db,we has some issues in Transport Routes so deleted and added the child system to Transport Domain Controller.
After adding the system, if we go to STMS->Import Overview-> QAS ( system queue name )-> here it asking to set the target client.
My issue is..when i click on " Set Target Client", it is ready to import all the transports...
Can i exclude importing all the transports and set the target client ?
Thank youHi NIA,
As mentioned by Sunny, you just have to add the NEW QAS system in the Domain.
Go to transport routes and then from "Configuration"-> "Adjust with Controller".
This will adjust the system with the Domain Controller.
Regards,
Anuj -
Hi All,
I need to import an externall request in to my environment.
The problem occur when I following steps:
1) Logon in Dev environment
2) Trx. STMS
3) Import Overview
4) Select Dev Queue
5) Extras->Other Requests->Add
The Add option Menu is disable.
How can I able the Add option menu, please ?
In another hand(Quality and Production) the Add option Menu is able.
Thanks
Regards
Marcos MagalhãesHi All,
The problem was solved with the following way:
The requests in DEV queue without target client(with red collor) were removed.
After that I updated the dev queue and menu worked fine.
Thanks
everybody!!!
Edited by: Marcos Magalhães on Jan 27, 2010 5:31 PM -
Transport queue is not updating?
Hi Gurus,
We have a 4 system landscape Dev->Test->Quality->PRD. After a transport is released from SE03 why the import queues are not update with the released request, except the "Test" Enviornment not the other systems in my landscapre (Quality & PRD)? but once the request has been imported into the "Test" enviornment, the Quality import queue and PRD import queue are updated? why not, once its released in "Dev" in the first place?
Thanks in Advance
AhamedDear Guru,
According to setup in my landscape, my Test system is the source system for the "Quality" & "Production". from this source system a delivery route is configured for the other two systems ( Quality & Production)
Note from: help.sap.com
When you set up a delivery route, you are making sure that all change requests that are imported into the routeu2019s source system are automatically flagged for import into the routeu2019s target system.
Thanks for your support, I appreaciate it.
Ahamed -
Short text problem in import queue (STMS)
hello,
I have a problem with the short text in the import queue on STMS,.
The short text no longer appears on new request, but still appear on import history.
would anyone help me with this matter?
Anthony P.This topic already discussed many times. If you search on SDN you will get the answer.
Unde stms import queue there is a icon personal setting --> under other setting make sure the read missing texts from data file is ticked. -
Need to delete the SPAM requests from the import queue
Dear all,
There were some issues with my QA system SAP patch application and we were forced to do a DB refresh from our production system. Now our QA system ABAP stack is having an issue with the STMS import queue which shows 4 old patches(witch were applied to the system before the refresh) with u201Crequest will not be importedu201D status. When I try to delete these requests from the import queue it shows the following error
u201CThis is tp version 372.04.29 (release 700, unicode enabled)
ERROR: Client 'ALL' is not possible.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0246
standard output from tp and from tools called by tpu201D
When I try to import a new support package it gives the following error,
Error in phase: CHECK_REQUIREMENTS
Reason for error: QUEUE_NOT_EMPTY
Not sure how these requests arew still in the import queue even after the DB refresh. How can I delete these 4 old requests from the import queue?
The System is ECC6.0 ABAP+JAVA stack with Oracle 10g on Win2003 server.
Thank you,
Siju SamDear Ganesh,
I have tried the steps you suggested, but still the import queue is not cleared.
Now I just wanted to remove these entires from the STMS=>queue=>import queue list.
Number Request Clt Owner Short Text
1 SAPKB70013 ALL SAPUSER Basis Support Package 13 for 7.00
2 SAPKA70013 ALL SAPUSER ABA Support Package 13 for 7.00
3 SAPKB70014 ALL SAPUSER Basis Support Package 14 for 7.00
4 SAPKA70014 ALL SAPUSER ABA Support Package 14 for 7.00
I think these requests(Patches) are not there in the tp buffer/(import queue) but somehow some table entries shows the status that they are still in the queue. So I just wanted to reset the status that These TPs are already applied.
Thank you,
Siju Sam -
Dear experts,
We have DEV,QAS & PRD(ON AIX and oracle 9.2) and solman (win2k3 & oracle 10.20 single system TMS).Few days ago we had configured Change request management successfully.As per requirement we had made Domain link between SOLMAN and Domain controller (QAS).Everything was working fine till two days ago when we observed that R/3 systems were not able to read the import queue of SOLMAN.Even solman was not reading its own import queue and giving error TP PROGRAM COULD NOT BE STARTED.checked sharing,permissions,hosts file entry ,service file entry ,rfcs(CALLTP_WindowsNT) but no benefit.But while checking dev_rfc we got the log
* Trace file opened at 20100518 100121 India Standard Time, SAP-REL 700,0,221 RFC-VER U 3 1090073 MT-SL
======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout during connection setup (check that partner exists)
ABAP Programm: SAPLSTPA (Transaction: )
Called function module: RFC_TP_INTERFACE_VERSION
User: TMSADM (Client: 000)
Destination: CALLTP_WindowsNT (handle: 3, 60566250, {243662DF-DDF4-F173-B81D-001A64656336})
SERVER> RFC Server Session (handle: 1, 95414842, {4BF07341-C79C-00D0-E100-8000AC10013A})
SERVER> Caller host:
SERVER> Caller transaction code: STMS (Caller Program: SAPLTMSC)
SERVER> Called function module: TMS_CI_START_SERVICE
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3339
CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456*
Timeout during connection setup (check that partner exists)
Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1833
seems to us that TP is not able to resolve host nameas entry is blank .Check RZ10 and tp profile where host name is mentioned.how to resolve this issue.please help me out.
Regards
RahulHi,
Have you tried restarting the SAP system (SOLMAN system) ?
Please check the HOST file on each server whether it also contains "host" entries for other servers.
Also check the below note if applicable in your problem.
[Note 616621 - RFC listener does not start after importing SR3|https://service.sap.com/sap/support/notes/616621]
Regards.
Rajesh Narkhede -
STMS: how to hide the Import All Requests button in the import queue view?
Hi All,
I'd like to know how to hide the "Import all requests" button in the import queue view.
Thanks a lot for your answers.
G.Hi,
about hiding i have a doubt but u can inactivate by following procedure,
As referred in a thread:
On the domain controller, in STMS>overview>systems>(double click the one you want to change)>Select Transport Tool tab and click on change. Add Import_single_only value 1, import_single_strategy value 1 and no_import_all value 1. Save distribute and activate.
or
Refer to OSS NOTE 194000.
Thanks & regards. -
Problem STMS: "Copying Import Queue SID "
Hello
I have a quetion, yesterday we changed the name server of production, now when I want to make the tranports I got this message
Copying Import Queue <SID>, I had checked the configuration of stms, RFCs and I did the test and these are ok
In the alert viewer I found this mesage
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: connection to partner 'prod.line-online.com:1823'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
Procedure
Contact your system administrator or use report RSTPTEST to localize the error. You can then execute the command again.
I don`t know Where can I check?
thanks a lotHi Danny,
Can u just clear us is the is the problem with transport control program is resolved.
in the above reply u r telling the requests don't load in the queue.
Is that means spool request or transport request. please clear the point.
Also as ur telling in SM21: "Spool is full" ; and another message says: "Run-time error "SPOOL_INTERNAL_ERROR" occurred"
are occurring. Can u just go to those work processes, and analyze the trace file errors(which will be listed in red colour).
if ur having any issues, paste the trace file error log here.
let us know if u have any issues,
Regards,
Ravi -
STMS Transport Route Administration - Import Targets not modifiable.
Hello. I'm trying to configure cCTS for use with CHARM. I have created my system clusters and defined a consolidation and delivery route for the clusters. Now when I double click on my clusters in edit mode and navigate to the Import Targets tab, I am not able to modify this tab. I have been following the cCTS for CHARM and QGM Configuration guide.
Thanks Jessica
I'm also working with OSS SAP Support now to try and resolve my issue.
In short I can some up the problem and testing completed so far.
<b>To Start:</b>
The Server group removed old QA server from our SAP Landscape, therefore STMS Transport Route required rebuilding.
<b>Systems:</b>
We have a very complex system setup with SAP R3, CRM and BW systems. Each system has it's own server (Dev = R3D, CRD & BWD, QA Testing is now = R3T, CRT & BWT, Production = R3P, CRP & BWP) The Original QA servers are now being removed (R3Q, CRQ & BWQ)
CRD is the Transport Domain Controller, with transport bins located on CRD for R3D & BWD, CRT for R3T & BWT and CRP for R3P & BWP. (Firewalls and Server locations are the root cause for the different Trans Directories)
<b>Transport route:</b>
Transport route for SAP R3 was: R3D -> R3Q -> R3T & R3P (in a delivery group). The new Transport Route needs to be R3D -> R3T -> R3P.
<b>Main Problem now:</b> With the Transport Route configured like R3D -> R3T -> R3P, any new transport requests created in R3D moves to the R3T Import Queue automatically when the transport is released. Once the transport is successfully imported into R3T, it should automatically be added to the R3P Import Queue, but does not.
<b>Present work around:</b> I've reconfigured the Transport route to R3D -> R3T & R3P. Any tranport request once released, is successfully added to both the R3T & R3P Import Queues.
I have checked all SAPService<sid> OS users and passwords, ensured that the TMSADM user was recreated and working on each of the systems, used telnet to log onto each of the servers from each of the other servers at the OS level (to ensure it's not a landscape firewall security issue), I've also checked all RFC connections in the same manner (to ensure each system can reach the others), recreated the route from R3T to R3P as both a Consolidation and a Delivery type of route,
I will post any resolution found later.
Thanks for the help anyway -
I export part of my master catalog to a laptop. I include the image files so I can edit the files at full res. After managing and editing files I import the catalog back into the master catalog. When importing I check to replace metadata, develop settings and negative files. I have been running some tests to be sure all my work is being captured in the master catalog by this process. I find that if I change develop settings or photo ratings this is detected when the file is imported and the data in the master catalog is updated properly. The surprise is that if I delete files or move files among folders in the exported catalog these changes are not detected and these changes are not updated inthe master catalog. It seems bizarre to me that such changes are not detected but I do not see how to get LR to recognize these changes and include them in the catalog update. Without this capability I don't see how to use catalogs to move part of a catalog to another computer for edits and file management and then move back to the master catalog.
There are various reasons why Lightroom works this way, but you'll need use pick flags to indicate photos to be deleted, and other metadata like colours or collections.
-
Sharepoint 2013 Active Directory Import- Manager field not updating
Hi,
SharePoint 2013 Active directory import -Manager field not updating
Concern/Issue-
We are using SharePoint and configured the Active Directory Import .First import it seems everything is working fine and OOB Organization chart built using User profile data is coming out right.
Now the user is moved from one Organization Unit to Another.
Now our Manager field is not Updating .There is change in AD manager attribute but not reflecting in the SharePoint User profile.
Manger field is mapped to "manager" attribute in SharePoint.
We tried removing the user and Re-Import using Incremental import but no luck.
Thanks for help in advance
SachinMoving a user from one OU to another in AD won't normally change the Manager attribute in AD. You would need to edit the user's organization settings to change the manager value in AD. I've also seen these changes not be picked up unless something
other than just the manager field in AD changing. Try changing something like Office location and see if the manager change is picked up by AD Import.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.
Maybe you are looking for
-
End of file 16072 error encore V 1.5.1.42735
I've been at this awhile and usually don't have much trouble so this is beginning to make me a little cranky. I used to get this error once in a while for the usual reasons (vid and audio not same length and mismatch on time/duration on animated but
-
Battery Failure and Kernel Panics. Help!
Hi all, Thanks in advance for your help. About a week ago, after I had left my computer alone for two days, it randomly shut off when the meter up top said it had 40 minutes. Then, when it was closed in sleep mode and I opened it, it told me it had t
-
hi guys, how do i make sure there are spaces between words in my System.out.println statetments please.. this is what i have tried but doesnt work System.out.println(" The measurements of the firstbox are " + awidth + aheight + adepth); the following
-
I recently inherited a network as a job change, and it has never been configured with VLANs. So, it is a completely flat network. My goal is to setup a few VLANs for our corporate wireless, guest wireless, voip, etc. Right now, I have about 220 devic
-
What does this mean: -deprecation for details?
hello,i am having a problem viewing this file. whenever a compile it i get this message: NOTE: Hint1.java uses or overrides a deprecated API. NOTE: Recompile with -deprecation for details. can anyone help me what this means? thanks. here is the file: