STMS - Queue description name change

Hi when I use STMS > Overview > Imports, I can see the names for our Dev, QA, and Production systems. I need to change the detail in the texts, how do I do this?
Thanks in advance
Wendy

Hi, log on controller system(dev),then STMS,click buttom System overview,double click on required system,then click Change buttom...

Similar Messages

Outlook does not connect to Exchange 2013 after name change due to marriage

When launching Outlook and clicking through the setup wizard to create a new profile, Outlook auto-discovers the correct email alias. When establishing a connection it successfully checks network connectivity and successfully searches the email settings.
When it attempts to logon to the mail server the error comes up.
"The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."
Clicking "Check Name" gives the error:
"The name cannot be resolved. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."
The same result occurs with a manual setup.
We are running Exchange Server 2013. User workstations are running Outlook 2013 on Windows 7 Pro. All updates have been applied as of March 31, 2015.
All name changes have been made in AD and Exchange. Old aliases and new aliases are set in Exchange. Offline Address books are updated daily. The local profile and registry settings have been updated on the workstation and the user is successfully logging
into the profile. The issue is only with Outlook 2013. User can access mail through OWA and ActiveSync on their mobile device.
Logging the user into another workstation and running the wizard returns the same results, which rules out the possible problem being with the workstation.

Hi,
According to your description, I understand that failed auto-configure Outlook with error “The name cannot be resolved. The connection to Microsoft Exchange is unavailable…”, however OWA works fine.
If I misunderstand your concern, please do not hesitate to let me know.
Are all account or any special user experience this question?
If OWA works fine, it indicate that the mailbox database is mounted, and mailbox works well.
I notice that you have changed the account name before issue arise, because external access, the client locates the Autodiscover service on the Internet by using the primary SMTP domain address from the user's email address.
More details about Autodiscover service, for your reference:
https://technet.microsoft.com/en-us/library/bb124251.aspx?f=255&MSPPError=-2147217396
Please try below command to force update address list, GAL, OAB, then test again:
Get-AddressList | update-AddressList
Get-GlobalAddressList | update-GlobalAdressList
Get-OfflineAddressBook | Update-OfflineAddressBook
If the issue persists, please wait for some time to complete configuration.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Description name of the purchase order

Hello experts,
My problem is the following : we change the description name of the purchase order in SRM, then we save the document and the old name is coming back. It doesn't take into account the modification.
Regards,
Kiolla

Hi,
I hope you are changing the description in the doc change badi. If its on the UI then please raise OSS message.
Regards
Azad

Computer Name changed to MINWINPC

We have about 200 computers that show their computer name as "MINWINPC". Doing an "ipconfig /all" shows the original computer name but doing a "net user" shows the computer name as "MINWINPC". In the control panel applet - the original computer shows but
the registry key: HKLM\System\CurrentControlSet\Control\ComputerName\ComputerName shows as "MINWINPC". Users can still access the network but administrators are unable to remotely access those machines. The fix appears to be as simple as changing the registry
key back to the original computer name(and rebooting) but I would like to figure out what is causing the issue. Some of the machines seem to have the name change occur after they have received the latest round of patches from Microsoft after the reboot.
It is not happening to all our Vista machines. I have changed the computer name back the original, uninstalled all updates from the day of the name change and resintalled the patches but have been unsuccessful in recreating the problem. Any thoughts?

I know this is an old thread but a new patch is causing the same issue MS13-098. The only Microsoft submission I have found is in Japanese and is translated as follows:
Phenomenon
In Windows Server 2008 or Windows Vista, you might not be able to log an error appears to apply the new update the following programs, if you try to log on after the restart. • MS12-024 (KB2653956)
• MS13-098 (KB2893294)
Error message displayed is as follows.
Incorrect password or user name
Back to the top | feedback
Collapse image Cause
This behavior occurs when you apply the update KB2653956 in the state of some data is damaged following registry key, or does not exist.
HKEY_LOCAL_MACHINE \ SCHEMA \ wcm :/ / Microsoft-Windows-CoreOS? ...
Any string will contain the part of the ... Note:. Also, make sure to load the SystemRoot% \ system32 \ SMI \ Store \ Machine \ SCHEMA.DAT file% if the HKEY_LOCAL_MACHINE \ SCHEMA does not exist.
When you apply the update of KB2653956 in the state where the registry key is not present, the value of the following registry is changed to MINWINPC, logon will not be able to.
• HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ComputerName \ ActiveComputerName
• HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ComputerName \ ComputerName
Back to the top | feedback
Collapse image Solution
If this occurs, change to the correct computer name the value of the ComputerName registry and ActiveComputerName start in safe mode, has been mentioned above, and then restart.
Back to the top | feedback
Collapse image Workaround
To prevent this phenomenon occurs, you download and run the System Update Readiness Tool from the following KB.
http://support.microsoft.com/kb/947821
By performing the system update Preparation tool registry that is described in Section Symptoms are repaired.
If the repair is made, starting with log Recreated missing key as the following WinDir% \ Logs \ CBS \ CheckSUR.log file% is recorded.
Recreated missing key:? Wcm :/ / Microsoft-Windows-CoreOS ... \ metadata \ elements \ ComputerName
In addition, regardless of the presence or absence of entry damaged Microsoft-Windows-CoreOS, you can set the value of the ComputerName key in this tool. For this reason, the following log is recorded in the CheckSUR.log.
Recreated value: @ _type.
Recreated value: @ dataOnly.
Recreated value: @ default.
Recreated value: @ description.
Recreated value: @ displayName.
Recreated value: @ handler.
Recreated value: @ legacyName.
Recreated value: @ legacyType.
Recreated value: @ migrate.
Recreated value: @ scope.
Recreated value: @ xsd: type.
Back to the top | feedback
Note: This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. It contains information in response to emerging issues are listed. As a result of the speed of information provided may be typographical
errors are included in the article, you might be revised at any time without prior notice. For other considerations, and use conditions
Please refer to.
Back to the top | feedback
Collapse image Property
December 11, 2013 - Revision: - Last Review: 2901584: 4.0 Document Number
This document that was written about products for.
• Windows Vista Business
• Windows Vista Business 64-bit edition
• Windows Vista Enterprise
• Windows Vista Enterprise 64-bit edition
• Windows Vista Home Basic
• Windows Vista Home Basic 64-bit edition
• Windows Vista Home Premium
• Windows Vista Home Premium 64-bit edition
• Windows Vista Starter
• Windows Vista Ultimate
• Windows Vista Ultimate 64-bit edition
• Windows Server 2008 Datacenter
• Windows Server 2008 Datacenter without Hyper-V
• Windows Server 2008 Enterprise
• Windows Server 2008 Enterprise without Hyper-V
• Windows Server 2008 for Itanium-Based Systems
• Windows Server 2008 Foundation
• Windows Server 2008 Standard
• Windows Server 2008 Standard without Hyper-V
• Windows Web Server 2008
• Windows HPC Server 2008
• Windows Essential Business Server 2008
Hopefully Microsoft will get this on the MS13-098 Bulletin immediately which they are always slow doing.

Why my workflow name changed?

Hi All,
Once I republished my workflow, my workflow name changed into "Workflow Status (1) ". Initially it was like "Workflow Status". What will be issue, how to fix this?
Thanks in advance!

Hi Sam,
According to your description, my understanding is that the workflow name changed to Workflow Status(1) after re-publishing the workflow.
I recommend to remove the Workflow Status(1) from SharePoint and then re-edit the workflow in SharePoint Designer, then publish it again to see if the issue still occurs.
Please go to Workflow Settings of the list which the workflow associated with and then Click Remove a workflow.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
See http://www.alsoft.com/diskwarrior/

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question. When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
Can I fully change the name without doing a complete re-install of Lion and all my apps?

One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

Logical system name changes

All,
Has anyone faced a scenario where you need to change the logical name for any SAP system?
For instance:
System      Logical Name                                                    System      Logical name B
BW                      A                     system is pointing to            ECC                  B
ECC will be upgraded and system name will changed to C
Is that possible? If so do you forsee any issues? Can we switch ECC B to ECC C with no issues?
I appreciate any help.
Regards

Hello Mike,
please elaborate a little more your inquiry. Are you talking about the ALE logical name changing? For this, please check the following notes:
#544509 ALE: Converting the name of the "logical system"
#121163 UTI: Logical System names
If you're referring to a domain name changing (like a Windows domain name change) or a hostname change, please refer to the following notes:
#96317:   Host names during R/3 upgrade, tips & tricks
#1275273: Hostname change on 7.10/7.11 java stacks
#757692: Changing the hostname for J2EE Engine 6.40/7.0 installation
#8307:    Changing host name on R/3 host: What do you do?
#1070561: SMD: Best practice for planned domain name changes
and on the following SDN threads:
/message/9196590#9196590 [original link is broken]
Re: Domain name change
Re: Change the Domain Controller
How to change hostname
Change Domain Controller
Or, lastly, you're talking about a SID change? On this case, you must perform a system copy to change de SID, please refer to the following note:
#11692: Renaming the system ID
(Sorry for the long and generic answer)
I hope this information helps.
Best regards,
Tomas Black

Batch rename, name changes after frame 99

Hi, I put a folder into bridge to do a batch rename and called the text MILAN/SYRIA and gave for first number 00.
After frame 99 the name changed to a weird Adobe Bridge Batch Rename Temp 10037
Which you can see better in the RAW windows, the 99 and the following one.
Photoshop doesn't like to open a name like that, can't blame her.
of course I strongly suppose that I should have given 3 digits in Batch rename, and l am looking for your confirmation, and while I am here
why was my card full at 0485 pictures when a folder I think takes as many as 9999, how do you finish a folder if your card is full?
i suppose you change card and you keep going with the same folder? Sorry about the camera question, couldn't keep it, thanks dona

no,no, i started with 00 two digits only, batch rename changed to 623 after i put the folder back in just in order to take the screenshot, i dont know why but that always happens if i put the folder back in after usage, but i do know for life now that if I am going to take over 100 shots, which is most of the time, i should start with 001 or 000.
See, this is the first number that was given to the first file, 01,WHICH actually became 00, i don't have it here.
So it rest to know where is "Preserve file name " in current metadata, and would that make it possible to revert to the original CR2 number?
Why not to change name straight from the new name? thanks

Where can I find a description of changes introduced in rev 29.0?

UI has changed significantly. I'd like to see a description of changes rather than having to figure them out on my own.

Which can be found on say mozilla.org under the green Firefox download button where it says [http://www.mozilla.org/en-US/firefox/notes/ What’s New].

InDesign CS4: File names change to string of numbers

Occasionally, one of our users will save an InDesign CS4 file, only to have the file name change. For example, a file originally named "#kwn25501.bcbsNM.indd" was saved as "#kwn25501.bc157-1223857848."
If the user is not aware that this has happened, things can go horribly, terribly wrong in our production environment. The "numbered" file may be missing key elements, or be somehow be corrupt in some fashion. In one case, this led us to having to reprint a job because the "numbered" file was missing a photo; somehow, that file was used (and perhaps renamed after the fact) to create the final output.
We use Macs running InDesign CS4 6.0.5. Some of our Macs are running Tiger 10.4.11, while others are running Leopard 10.5.8. The problem seems to related to the Leopard machines, although that is not 100 percent certain at this point. All of these Macs are bound to Active Directory and save files to a Windows 2003 server. I know Adobe recommends against working on files over a network, but perhaps there is an explanation for this file renaming aside from network issues.
Any light that can be shed on this issue will be greatly appreciated. Thanks!
Kevin Stauffer

Check to see if maybe your original filename is the problem.
You may need that particular name for a workflow reason, but some of the symbols in the middle of your filename are generally not a good idea. Especially working off of a server, file names should be ONLY alpha-numeric characters, no symbols, no periods (except for the file type) and only underscores or dashes to separate words, no spaces.
The reason is some of those symbols get picked up as machine language and all sorts of bad can happen as a result.
Message was edited by: Michael Riordan

HT1229 How do you transfer photos to external backup and keep the photos in events with event name or with description name. Each time I have tried to transfer them they only transfer with a jpg number so you don't know what photos are what.

How do you transfer photos to external backup and keep the photos in events with event name or with description name. Each time I have tried to transfer them they only transfer with a jpg number so you don't know what photos are what. When you have several thousand photos it is difficult to determined what is what.
Why does iPhoto have the ability to put photos in events and to give them descriptions if it doesn't transfer this info with the photo. I want to back my photos up to an external drive.

The simplest way to achieve what you want is to back up the iPhoto Library. That will get everything.
You sem to be exporting from iPhoto to the Finder. The Finder does not have the same organisation capabilities as iPhoto. If you're going to do that you need to understand some of the differences between the two.
Event Name will become Folder Name.
'Description Name' I guess is the Title you give the Photo
Jpeg Number is the File Name assigned by your camera.
So: File -> Export
Set your Kind to Jpeg
Select your preferred Quality
Check the Boxes at 'Titles and Descriptions' and Location Information
Under FIlename select 'Use Title'
Click on Export. In the Next Window choose a New Folder as your export destination and then Name that as you prefer
Regards
TD

E-mail Attachment Name Changes

I have a following problem with mail attachments: When I drag the attachment from my mail window onto my desktop, the attachment name changes to "unknown". So for example, "cat.jpg" would become "unknown.jpg". To make this a bit more complicated, the problem is a bit random and from this it follows that sometimes the file keeps the original and correct file name and sometimes it changes it. Also, this problem occurs only when I drag the attachment (which normally is image) from email window, but if I pull the attachment from above the message window, where it has a little arrow and it shows all the attachment icons, this problem does not happen. I am running Tiger and Mail 2.1. It would we really great if you could take a sec to answer this if you have any idea at all what this problem might to be. Thanks!
Best, Rauno

Hi Rauno, and a warm welcome to the forums!
Hmmm, since it's random, might try this...
Quit Mail, then In your home folder, try moving this +folder & file+ to the Desktop then reboot...
First, Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these files to the Desktop.
/Users/YourUserName/Library/Caches/Mail
Move to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
You can always move them back if it doesn't help.

Display name of shared calendar in Outlook clients after name change on the Exchange Server

I have changed the name of a conference room resource calendar on the Exchange server but the name change is not being reflected in the end user's Outlook clients. I tested a remove/re-add and that worked but I cannot have everyone in the company do this.
Is there anyway to force the change down to the Outlook clients?

I don't know for sure, but if this is the case, then it's highly likely that the GUID is used by the client after its first view of the calendar. From that point on, it appears it doesn't "revisit" the directory for updated names.
We'd need Outlook team feedback for confirmation.

Why does the PDFs' name change when i view them in the iBooks app?

i have some past papers and marking schemes in my iTunes library....when i sync them to my iPad, they appear just fine....they are there just the way i named them and all...
but when i open them, the name changes to some coded-ish name with lots of numbers and all that....
is it possible for me to change some setting and save the name i want for those PDFs? Or am I going to have to live with this madness?
please help!

Hello, I wanted to follow up on this issue after reviewing some of the changes with the current update. [https://bugzilla.mozilla.org/show_bug.cgi?id=1049521] This bug addressed some Windows HKEYs that are changed when Firefox is updated/or installed.
As an update, a patch has been made and changes are on the way for fresh installs of Firefox :-)

STMS - Queue description name change

Similar Messages

Maybe you are looking for