STMS -- TRANSPORT TOOL ERROR DB CONNECT : LINK TO BD FAILED ? HELP

HAI,
     i have installed a new sandbox with SAP 4.7c x200 , on windows 2003 and 64 bit kernel.
I have to apply support packages to it .
After fresh installation , i configured TMS and now when i check the tp  as
STMS>OVERVIEW>SYSTEMS>SAP SYSTEM>CHECK-->TRANSPORT TOOLS , there a tree structure opens  and everything is fine except the tree part tp call  having DB CONNECT : LINNK TO DATABASE FAILED  AND
offline call having  CONNECT  FAILED  DUOE TO DBSL LOAD FAIL
these two comes in yellow and when i follow the detail it gives a pop up message
as below:
      This is tp version 340.16.24 (release 640)         
Warning: Parameter DBHOST is no longer used.       
Warning: Parameter DBNAME is no longer used.       
ERROR: No connect due to DbSl Load Lib Failure     
ERROR: environment variable dbms_type is not set.  
ERROR: Connect to UPG failed (20071102130751).     
INFO: no trace information stored                  
tp returncode summary:                             
TOOLS: Highest return code of single steps was: 0  
ERRORS: Highest tp internal error was: 0249        
standard output from tp and from tools called by tp:
So when i apply package it stops in CHECK_REQUIREMENT PHASE indicating that connection with db failed, also whe i reun to connect it is giving everything fine
help me out
regards
manu

Hi,
please try to set the env variable 'dbms_type=mss' globally - just to make sure that we don't get confused here by specific users. I think tp should run under the account SAPService<SID>. Lets see what happens then...
Regards,
Sven

Similar Messages

  • Error in Check transport tool" DB Connect Link to database failed"

    Hello Guys,
    I am trying to close a request but I can't , the return this mensage :
    <b>"Test call of transport control progam(TP) ended with return code 0232"</b>
    when I try to check transport rout, I see the error below :
          <b>  DB connect            Link to database failed                  
            Offline call                   connect failed                           </b>
    My Database is SQL SERVER 2000
    Thanks

    Hai....
    Just i want to confirm, was STMS was configured previously,
    if No, Configure it .
    If yes log-in to the Domain Controller system 000 client, and execute the T-code STMS, From the menu goto Overview -> Systems
    you will be displayed all your systems, by selecting one by one system execute " Update Configuration"  from SAP System Menu.
    Regards
    KHS

  • Error : HTTP Connection to ABAP Runtime failed

    Hi,
       i am working on xml to flatfile interface.when i am trying to test the scenario from ID - > Tools -> Test configuration option i am getting below error.
    Receiver Determination <Not found>
    Internal Error Http connection to ABAP runtime failed.
    Error : 403 for bidden.
    I have checked in Receiver determination its been configured properly.
    Is it any basis settings problem ?
    Thnx,
    Siva.

    Hi Siva,
    Check this links
    /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
    http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
    Regards
    Ramesh

  • PI internal error : HTTP connection to ABAP Runtime failed

    Hi Experts,
    From last 3 days,I am geting a SAP PI internal error(PFA for the detail).for that error,previous sucessful scenario also not working.The error I am getting in the 'TEST CONFIGURATION' of the ID:(sometimes i am getting this error in ' Receiver Determination' and sometimes in 'interface determination & mapping')
    [ Receiver Determination
    <Not found>
    Internal Error
    HTTP connection to ABAP Runtime failed. Error: Unexpected end of file from server URL: http://deveppi103:8002/sap/xi/simulation?sap-client=117 User: PIDIRUSER ]
    Please,suggest.
    Regards,
    Raj Tripathy

    Hi Raj,
    We had faced this issue a few days back and there was an entry missing in the table.
    This issue has been discussed on this forum multiple times:
    Prefix number: entry missing for system TST client
    workflow- Prefix number: entry missing for system xxx Client xxx
    Regards,
    Sanjeev.

  • In iWeb I created a hyperlink to a file on my computer. When I publish I get a 404 error for the link.  Can anyone help?

    In iWeb I created a hyperlink to a file on my computer. When I publish I get a 404 error for the link.  Can anyone help?

    How would I check to see if the like works when I enable via the inspector pane
    If you enable hyperlinks when you click on the link link to the pdf file it will open a browser window and display the pdf file.
    I upload the pdf files to the server and link to them as if they were an external web page:
    That's been more reliable for me than linking to the file as Link To: A file and have iWeb upload the pdf file to the serve.

  • My Ipad has stopped receiving emails today. It has IOS7 on it. The settings are correct but says "connection to the server failed" help!

    My Ipad has stopped receiving emails today. It has IOS7 on it. The settings are correct but says "connection to the server failed" help!
    It is the same accout that has been working find for years and just after I updated the software this has happened. My Mac is still receiving and sending via Outlook with the same account and settings. My Iphone 5C has also stopped and I tried deleting the account and adding again (via exchange as it's an exchange accout) the same way I always do and it won't even recognise it to add the settings.
    So annoying. Can anyone help?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

  • TMS Check Transport Tool Error

    Hello Experts,
    We have migrated the database from Informix(DEV old machine) to Oracle(DEV New machine) and found the system up and running fine except the DBconnect failed error when i run the STMS->system overview->select the system as DEV-->R3System->check->Transport tool.
    Please find the error log herewith:
    developertrace,0] Logon as OPS$-user to get SAPR3's password            
    developertrace,0] Connecting as /@DEV on connection 0 ...               
    developertrace,0]   >oci_logon(con_hdl=0, user='', dbname='DEV')        
    dbsloci.,6405] *** ERROR => CONNECT failed with sql error '1019'        
                                                             developertrace,0] Try to connect with default password        
    developertrace,0] Connecting as SAPR3/<pwd>@DEV on connection 0 ...     
    developertrace,0]   >oci_logon(con_hdl=0, user='SAPR3', dbname='DEV')   
                                                            dbsloci.,6405] *** ERROR => CONNECT failed with sql error '12705'       
    We have tried almost every option given in the SAP notes but couldnt figure out the issue. We are now not able to support PRD now as the DEV is not available. Can any one quickly help me in resolving the issue...
    R3 -> 45B
    OS: UNIX
    Kernel: 45B_EXT
    We are getting no error when we run R3Trans -x and R3Trans -d as well.
    Please help us in resolving the issue ASAP...
    P.S: If you could give your contact number, iam ready to call you and talk to you regarding the issue and can work upon this.
    Thanks and Regards,
    Mani
    +91 934 749 6777

    Hi Ruchit,
    Please find the trans.log file after I run R3Trans -x herewith:
    4 ETW000  [developertrace,0] New connection 0 created            20  0.034731
    4 ETW000  [developertrace,0] db_con_connect (con_name=R/3)       62  0.034793
    4 ETW000  [developertrace,0] Got ORACLE_HOME=/oracle/DEV/920_64 from environment
    4 ETW000                                                         89  0.034882
    4 ETW000  [developertrace,0] -->oci_initialize                   23  0.034905
    4 ETW000  [developertrace,0] Got ORACLE_SID=DEV from environment
    4 ETW000                                                         42  0.034947
    4 ETW000  [developertrace,0] Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environme
    nt
    4 ETW000                                                         29  0.034976
    4 ETW000  [developertrace,0] Logon as OPS$-user to get SAPR3's password
    4 ETW000                                                         22  0.034998
    4 ETW000  [developertrace,0] Connecting as /@DEV on connection 0 ...
    4 ETW000                                                         29  0.035027
    4 ETW000  [developertrace,0] -->oci_logon(con_hdl=0, user='', dbname='DEV')
    4 ETW000                                                         31  0.035058
    4 ETW000  [developertrace,0] Now I'm connected to ORACLE      62893  0.097951
    4 ETW000  [developertrace,0] Got SAPR3's password from table SAPUSER
    4 ETW000                                                       1408  0.099359
    4 ETW000  [developertrace,0] Disconnecting from connection 0 ...
    4 ETW000                                                         23  0.099382
    4 ETW000  [developertrace,0] -->oci_logoff(con_hdl=0)            22  0.099404
    4 ETW000  [developertrace,0] Now I'm disconnected from ORACLE
    4 ETW000                                                       1032  0.100436
    4 ETW000  [developertrace,0] Try to connect with the password I got from OPS$-us
    er
    4 ETW000                                                         25  0.100461
    4 ETW000  [developertrace,0] Connecting as SAPR3/<pwd>@DEV on connection 0 ...
    4 ETW000                                                         22  0.100483
    4 ETW000  [developertrace,0] -->oci_logon(con_hdl=0, user='SAPR3', dbname='DEV')
    4 ETW000                                                         22  0.100505
    4 ETW000  [developertrace,0] Now I'm connected to ORACLE      40345  0.140850
    So as this is not giving any error, i dont think this is a problem with sapr3 password.
    Apart from that we suspect that there is some problem with the env variable ORA_NLS33... but couldnt get to the bottom of the problem...
    Please find the trace file we got when we ran tp command:
    [developertrace,0] db_con_connect (con_name=R/3)                64  0.058188
    [developertrace,0] Got ORACLE_HOME=/oracle/DEV/920_64 from environment
                                                                     85  0.058273
    [developertrace,0] -->oci_initialize                            23  0.058296
    [developertrace,0] Got TNS_ADMIN=/oracle/DEV/920_64/network/admin from environment
                                                                     42  0.058338
    [developertrace,0] Got ORACLE_SID= from environment             43  0.058381
    [developertrace,0] Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environment
                                                                     29  0.058410
    [developertrace,0] Logon as OPS$-user to get SAPR3's password
                                                                     21  0.058431
    [developertrace,0] Connecting as /@DEV on connection 0 ...
                                                                     28  0.058459
    [developertrace,0] -->oci_logon(con_hdl=0, user='', dbname='DEV')
                                                                     30  0.058489
    [dbsloci.,6405] *** ERROR => CONNECT failed with sql error '1019'
                                                                   2235  0.060724
    [developertrace,0] Try to connect with default password         18  0.060742
    [developertrace,0] Connecting as SAPR3/<pwd>@DEV on connection 0 ...
                                                                     23  0.060765
    [developertrace,0] -->oci_logon(con_hdl=0, user='SAPR3', dbname='DEV')
                                                                     22  0.060787
    [dbsloci.,6405] *** ERROR => CONNECT failed with sql error '12705'
                                                                  60464  0.121251
    [        ,597] ***LOG BY2=>sql error 12705 performing CON       48  0.121299
    [        ,597] ***LOG BY0=>                                     17  0.121316
    [tpsqlora.c,1104] end: tp_connect                               13  0.121329
    Any help in this way is very much appreciative.
    Best Regards,
    Mani

  • Check Transport Tool error

    Hi,
    We are having a problem when checking the transport tool for our PRD system from the domain controller which is DEV system. Our landscape is this:
    Our DEV system/server resides in one location, the QAS and PRD server resides on another location which has different network than DEV. Is that possible to configure the transport management system with that kind of landscape? And if it is okay for a transport route to be generated for the three systems?
    When we check on the transport tool for PRD system from domain controller, we are getting inconsistent output. Please see attached screenshot.
    Hoping for a prompt response.
    Thank you!
    Regards,
    AJ

    Hi Deepanshu,
    Yes i have configured it by including PS3 and QS3 in the domain system of DEV (Domain controller) and approved it their. but when i do the distribute and activate TMS configuration, QS3 and PS3 is interrupted. Please see below error:
    And i again checked the RFC connections it is all working fine.
    But when i check the transport tool for PS3 it says below error:
    Thank you!
    Regards,
    AJ

  • DB Connect - Link to database failed

    I encountered error when I use the TMS Check Transport Tool. Both DB Connect and Offline Call failed during tp Call. Below are the log from the error.
    I have seen through notes 351586 TP: DBSL error 107, DB error 208 with Connect and have set up the enviornment variables and the users in the SQL server. Yet am not able to resolve the issue.
    Thanks,
    Aniruddha
    ERP: DB_CONNECT
    This is tp version 370.00.09 (release 700, unicode enabled)
    Warning: Parameter DBHOST is no longer used.
    Warning: Parameter DBNAME is no longer used.
    ERROR: Connect to ERP failed (20070430005138, probably wrong environment).
    TRACE-INFO: 1:  [dev trc     ,00000]  Mon Apr 30 00:51:38 2007                                     2031  0.002031
    TRACE-INFO: 2:  [dev trc     ,00000]  load shared library (dbmssslib.dll), hdl 0                      9  0.002040
    TRACE-INFO: 3:  [dev trc     ,00000]      using "D:\usr\sap\ERP\DVEBMGS10\exe\dbmssslib.dll"          9  0.002049
    TRACE-INFO: 4:  [dev trc     ,00000]  Thread ID:5552                                               1578  0.003627
    TRACE-INFO: 5:  [dev trc     ,00000]  Thank You for using the SLOLEDB-interface                      10  0.003637
    TRACE-INFO: 6:  [dev trc     ,00000]  Using dynamic link library 'D:\usr\sap\ERP\DVEBMGS10\exe\dbmssslib.dll'
    TRACE-INFO: 7:                                                                                18  0.003655
    TRACE-INFO: 8:  [dev trc     ,00000]  dbmssslib.dll patch info                                       19  0.003674
    TRACE-INFO: 9:  [dev trc     ,00000]    patchlevel   0                                                8  0.003682
    TRACE-INFO: 10:  [dev trc     ,00000]    patchno      72                                               7  0.003689
    TRACE-INFO: 11:  [dev trc     ,00000]    patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
    TRACE-INFO: 12:                                                                                11  0.003700
    TRACE-INFO: 13:  [dev trc     ,00000]  np:(local) connection used on IWDFVM2160                       62  0.003762
    TRACE-INFO: 14:  [dev trc     ,00000]  CopyLocalParameters: dbuser is 'dbo'                           12  0.003774
    TRACE-INFO: 15:  [dev trc     ,00000]  Using Provider SQLNCLI                                       7171  0.010945
    TRACE-INFO: 16:  [dev trc     ,00000]  OpenOledbConnection: MARS property was set successfully.      117  0.011062
    TRACE-INFO: 17:  [dev trc     ,00000]  Provider Release:9.00.1399.06                               55773  0.066835
    TRACE-INFO: 18:  [dev trc     ,00000]  Using Provider SQLNCLI                                        412  0.067247
    TRACE-INFO: 19:  [dev trc     ,00000]  OpenOledbConnection: MARS property was set successfully.       74  0.067321
    TRACE-INFO: 20:  [dev trc     ,00000]  i'm dbo but there exists 1 users <> dbo with tables SVERS ==> connect terminated
    TRACE-INFO: 21:                                                                                4320  0.071641
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0232
    standard output from tp and from tools called by tp:

    The default profile (default.pfl) has the following entries.
    SAPDBHOST = IWDFVM2160
    dbms/type = mss
    dbs/mss/server = IWDFVM2160
    dbs/mss/dbname = ERP
    dbs/mss/schema = erp
    system name being IWDFVM2160.
    None of the other profile files have any of the entries mentioned above: the files are(ERP_DVEBMGS10_iwdfvm2160, ERP_SCS00_iwdfvm2160)
    Do i need to make an entry in any of these files.
    Regards,
    Aniruddha

  • Error message: CONNECTION FAILURE. DOWNLOADING FAILED. IMAGE CANNOT BE LOADED. PLEASE TRY AGA

    I recently purchased Photoshop Touch for use on my Samsung Galaxy Note 10.1. I have uploaded files to Creative Cloud from CS5 version of Photoshop. I can view the file thumbnails on my tablet, but when I go to open them, I get the following error every time:
    CONNECTION FAILURE. DOWNLOADING FAILED. IMAGE CANNOT BE LOADED. PLEASE TRY AGAIN.
    Any ideas on what I can do to resolve this issue would be greatly appreciated. I am ready to pull my hair out!! Thanks

    What kind of file type are you trying to open? - Guido

  • ERROR 53761 Connection  Bind through PTA failed (91). Retrying...

    We are using Enterprise Directory Server 7.0 (zip version) on two Linux machines A & B. Independently directory servers are working fine on both machines A & B. DSCC is running on Machine A (deployed in Sun app server 9.1)which is managing the directory server (DS1) on same machine A.
    We want to manage DS2 running on machine B using DSCC running on machine A. We can create a instance on DS2 (machine2) using DSCC running on machine A but see the operation error in DSCC console as "Unexpected Error".
    I checked the DS2 error logs, it says..
    [12/Oct/2010:10:23:13 -0700] - ERROR<53761> - Plugins - conn=-1 op=-1 msgId=-1 - Connection Bind through PTA failed (91). Retrying...
    [12/Oct/2010:10:23:13 -0700] - ERROR<53761> - Plugins - conn=-1 op=-1 msgId=-1 - Connection Bind through PTA failed (91).
    I tried to enable the access via DSCC to DS1, it enables the access as "message comes successfully enabled" but i still do see the operation error in DSCC console as "Unexpected Error" for DS2.
    This is my current pass through plugin entry in DS2
    dn: cn=Pass Through Authentication,cn=plugins,cn=config
    objectClass: top
    objectClass: nsSlapdPlugin
    objectClass: ds-signedPlugin
    objectClass: extensibleObject
    cn: Pass Through Authentication
    nsslapd-pluginPath: /opt/ldapapp/ds7/dsee7/lib/passthru-plugin.so
    nsslapd-pluginInitfunc: passthruauth_init
    nsslapd-pluginType: preoperation
    nsslapd-pluginarg0: ldap://DS1.csueastbay.edu:3998/cn=dscc
    nsslapd-pluginEnabled: on
    modifiersName: cn=dirmgr
    modifyTimestamp: 20101007221727Z
    nsslapd-pluginId: passthruauth
    nsslapd-pluginVersion: 7.0
    nsslapd-pluginVendor: Sun Microsystems, Inc.
    nsslapd-pluginDescription: pass through authentication plugin
    if I set the nsslapd-pluginarg0 parameter as ldap://*DS2*.csueastbay.edu:3998/cn=dscc (Note DS2 instead of DS1) then I get the operational status in DSCC for DS2 host as Inaccessible (*to enable access click on the server and then on "Enable Access")* .
    Now I enable the access using DSCC on host A and message comes access is enabled successfully for DS2 and but I again see the operational Status as "Unexpected Error" for DS2 host.
    Could you please shadow some light what could be wrong?
    Appreciated your quick response.
    Thanks

    Thanks for the reply. I do see the host names in /etc/hosts file on both the machines ( DSCC as well actual directory server) but no positive response yet. I think the error is lying here. Ran dsccmon on the server where Directory server 7.0 is running.
    [diruser@ds1 ~]$ dsccmon view-servers -E
    Server Status Version Entry# Suffix# Roles
    ds1.csueastbay.edu:1389 ERROR - 0 0 ---
    ds1.csueastbay.edu:1389 {
    ERROR_UNEXPECTED_FAILURE[javax.naming.NamingException: [LDAP: error code 1 - Can't connect to the LDAP server]]
    at com.sun.directory.dcc.core.ServerCacheEntryImpl.reportException(ServerCacheEntryImpl.java:195)
    at com.sun.directory.dcc.core.ServerLoader.run(TopologyLoader.java:334)
    Caused by: javax.naming.NamingException: [LDAP: error code 1 - Can't connect to the LDAP server]
    at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3081)
    at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2987)
    at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2789)
    at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2703)
    at com.sun.jndi.ldap.LdapCtx.ensureOpen(LdapCtx.java:2602)
    at com.sun.jndi.ldap.LdapCtx.ensureOpen(LdapCtx.java:2576)
    at com.sun.jndi.ldap.LdapCtx.reconnect(LdapCtx.java:2572)
    at javax.naming.ldap.InitialLdapContext.reconnect(InitialLdapContext.java:173)
    at com.sun.directory.common.ssl.LdapContextUtils$3.run(LdapContextUtils.java:251)
    at java.lang.Thread.run(Thread.java:619)
    Embedded exception:
    javax.naming.NamingException: [LDAP: error code 1 - Can't connect to the LDAP server]
    at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3081)
    at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2987)
    at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2789)
    at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2703)
    at com.sun.jndi.ldap.LdapCtx.ensureOpen(LdapCtx.java:2602)
    at com.sun.jndi.ldap.LdapCtx.ensureOpen(LdapCtx.java:2576)
    at com.sun.jndi.ldap.LdapCtx.reconnect(LdapCtx.java:2572)
    at javax.naming.ldap.InitialLdapContext.reconnect(InitialLdapContext.java:173)
    at com.sun.directory.common.ssl.LdapContextUtils$3.run(LdapContextUtils.java:251)
    at java.lang.Thread.run(Thread.java:619)
    1 server error(s) displayed

  • TS3899 unable to receive hotmail from iphone 4s. its keep spinning with error the connection to the server failed. Some time it downloads old mails.

    I am unable to receive email from hotmail. It is spinning with checking for email message. Some time it downloads old emails and then those emails disappears and redownloads.  some times shows connection to the server failed.  From laptop there are no issues with account or email. Any ideas?

    Hi Friend,
    Look at this discussion: https://discussions.apple.com/message/20830562?ac_cid=sa123456#20830562
    You probably will think that discussion has not the same problem as you, but probably has your answer there.
    So please have a look and try those solutions.
    Hope it will be helpful

  • Exchange Server Error - The connection to the server failed

    Since two days ago, one of my GMAIL accounts on my iPhone stopped receiving emails.  I use Exchange Server, and have been getting the following message: Cannot Get Mail.  The connection to the server failed.
    I have tried multiple things as stated over the forum(s) but nothing seems to be working.  This is only affecting one account (the most important one!), while the remaining two GMAIL accounts on the same device are working fine.
    Can someone tell me how to fix this problem and continue to receive emails using exchange server?
    Thanks

    OK - 5 of us at work, all with iPhone 5's, all 32Gb. 2 of us can sign into Gmail using the Exchange Server with no problems, the other 3 (including me) cannot get emails to push. When set to push it comes up with "cannot get mail the connection to the server failed". (If set to Fetch then it does work) So we deleted all our accounts and the two that could connect with push tried it on our phones that wouldn't to see if it was a Gmail thing but they couldn't connect either - same message. I tried on on of the other phones and hey presto, it works! We are all running the same OS (iOS6.1.2) So it has to be device specific - what is going on here???? !!! Really, really hacking me off now - wish I'd never bought the bloody thing. Rapidly going off Apple...

  • SQL SEREVR CONNECTION TO LOCAL DATABASE FAILED ,help!!

    Hai,
           I detached my dev database from sql server 2000 enterprise manager and then i replaced my old data files mdf,ndf and ldf with the new once on the same location. now when i start sql server it is not showing any of databases , i also registered the sql server again and it gives me mesage can't connect to database login failed.
       i think there must be some password at db level which is causing problem.
    if i have to change the old password at this stage what should i do??
    hope i find some solution
    regards
    jase

    Hi,
    you must logon with another user. Use a local admin. Logon on Windows with another local admin and connect to your SQl Server. Once you are connected attach the database again. Then you are able to connect via sidadm again.
    The root cause is, that the default database of the sidadm is detached, so the sidadm cannot log on.
    A second way can be to use the osql.exe tool. Open a command promt and run
    osql -E -dmaster
    This should you connect to the default instance of the server and switch to the master database, Then you can run
    exec sp_defaultdb '<sid>adm','master'
    go
    Then you should be able to logon as sidadm as well.
    regards
      Clas

  • Mail displaying the message "cannot get mail the connection to the server failed" Help!!!

    Hi
    Overnight both my hotmail accounts on my Iphone 4s, through Mail, have stopped working and I cannot access my email. Every time I try I get the message "Cannot get Mail. Connection to the Server Failed"
    I have rebooted my phone, deleted and readded the accoutns and even reset my network settings to factory seeting but nothing works. A few hours ago it randomly started working again but has since stopped.
    Please Help!!!

    Contact Microsoft to see if Hotmail is having any issues.
    The issue described is not an iPhone or iOS issue.

Maybe you are looking for