STO by Storage Location

Hello Every One,
is there any way to create STO by Storage location, i mean just like plant if i made storage location as a vendor, and then create STO, any comments or any suggestions.
regards,
qsm sap

HI
NO  U  CAN  NOT  DO  STO  IN  STORAGE  LOCATION WISE
U  CAN  DO  TRANSFER POSTING USING MOVT  311  STORAGE  LOCATION  TO  STORAGE  LOCATION IN  ONE  STEP
IN  MOVT  313  STORAGE  LOCTION  TO  STORAGE  LOCATION  IN  TWO  STEP PROCEDURE
OK
KISHORE

Similar Messages

  • Excise for STO for Storage location

    I have a requirement whre i want to create Excise invoice for STO between storage location, as i already raised this doubt in SD community, but did not got the satisfaction.
    As i want to use the same excise NUMBER series which is assingned to excise document when i create Excise with reference to Billing Document.
    Plz guide how i will configure for Excise for STO in case of Storage location transfer and how i will maintain the same series for the EXCISE which i have created for when i create excise with referecence to my billing document.

    not required

  • STO Between Storage location configuration

    Hi,
    We are using STO configured for Plant to Plant stock transfer.
    Now we wish to configure STO between Storage Location
    We wish to know whether STO between Storage locations can be used along with STO between Plants.
    We are in ECC 6.0.
    Regards,
    Kiran

    Hi Kiran,
    Yes, you can use STO with plant to plant as well as STO with st.loc to st.loc. but the plants have to be differnet plants.
    Check the customizing for st.loc. sto in ECC 6.0
    Cheers,
    Satish Purandare

  • Stock transfer between plants without STO and storage locations

    Hi.
    In case of stock transfer betwen storage locations with one step it is possible to do stock transfer between different stock types. But in Two step it is only possible to do stock transfer from unrestricted to unrestricted.
    In case of Stock transfer between Plants without STO in one and two step stock transfer, it is possible to do stock transfer  from unrestricted to unrestricted.
    Is there any reason for this?

    Hi
    Thanks for your reply. But i could not understand the sentence - But this is not possibles with 2 step procedure. becasue 2 step is recored will be maintained . In 2 step it not possible. Can you please eloborate on this
    Regards,
    Vivek Swarnapuri

  • STO for storage location to storage location with delivery charges

    Dear Users,
    Please advice the configuration & pre-requisites for storage to storage location STO with delivery charges within a plant.
    Thanks & Regards,
    Shyam

    Moderator message:
    Please put some efforts into a search
    Storage location to storage location stock transfers have been many times discussed as well as delivery charges in UB stock transfer order.
    Do not just post your requirements and expect others to do your job.
    If you dont know how to search, then please see these blogs:
    A good way to search the forum is with google. See this blog with details for a good search
    Getting the Most out of Google: Optimizing Your Search Queries
    This blog describes how to use the SCN search:
    How to use SCN search
    The discussions are not a replacement for proper training
    Thread locked

  • STO Issuing Storage location

    HI
       We use STO process to transfer goods between two plants in same company code
    we are in *4.7 Version *
    Our requirement is to have an option to enter issuing storage location or have the BADI defualt the Sloc from a Z Table
    Thanks
    Kumar

    Hi,
    Why do you need to source it from Z* table? Is standard OVL3 transaction not suitable for you?
    Regards,
    Dominik Modrzejewski

  • SETTINGS STO FOR STORAGE LOCATIONS

    Hi all,
    am new to this community.plz explain me is it necessary to do the settings in spro for sto for storage loacations and why??????

    Hi Amrita,
    First, Wel Come to SAP Community...........
    Plz go through below STO config..........
    Follow the below steps to to make STO between two plants belongs to different company company codes.It is also called as Inter Company STO.....
    1)Create one Customer Master in XD01 with respect to Supplying Plant Sales Area and assign this Customer no with Receiving Plant in OLME->PO-> set up STO->Define shipping data for plant and for the supplying Plant assign the above sales area.( Make sure,In Customer Master,sales Area Tab: you are maintaining shipping condition)
    2) For Receiving Plant Pur. Org and Co.Code Combination create Vendor master in XK01 and in this vendor master assign the Supplying plant in Pur.Org.Data screen->Extras--> Add.Pur.data
    3) OLME->PO-> Set up STO------>For your supplying plant assign document type NB, Delivery type NLCC and Checking Rule RP
    4)then For your supplying Plant and receiving Plant assign Document type NB
    5)Make sure you are maintaining Sales View for the material at supplying Plant and in Sales /Gen plant Data view maintain Availability check, Loading group and Transportation group.
    6) In SPRo-->Logistics execution> Shipping->Basic shipping functions->Shipping point Determination>assign shipping points-> For your Loading group,Shipping Condition and Supplying plant combination,Assign shipping point
    these are the configuration settings you have to do in background.
    Then Create STO from Receing Plant in ME21N with document type NB.
    Based on that STO, Create Delivery in VL10B from supplying Plant
    Do PGI in VL02N from Supplying plant
    Do GR in MIGO at Receiving Plant keeping Outbound delivery as a ref. document.
    Now your STO bet. two plants belongs to diff. Co.Codes will be completed.
    For Intra-Company STO: ie)STO bet. Plants belongs to same Co.Code
    1)Create one Customer for Supplying Plant Sales area and assign this Customer no with Receiving Plant in OLME---> PO -
    > Set up STO -
    > define Shipping Data for plants. and maintain the same sales area in your Supplying plant.
    2) In OLME---> PO -
    > Set up STO.....for your Document Type: UB and Suppying plant Combination assign Del. Type NL and Checking rule RP
    3) In OLME---> PO -
    > Set up STO...for your Supplying Plant and Receiving Plant combination Maintain Doc. Type : UB
    Make sure you are maintaining Sales View for your Material at Supplying Plant.
    4) Maintain Shipping point at, SPRO----> Logistics Execution -
    > Shipping -
    > Basic Shipping Functions -
    > Shipping Point Determination for Plants.....there for your Loading group,Shipping Condition, Shipping Plant combination maintain Shipping plant..
    Now Create STO in ME21N with Doc.type: UB at Receiving Plant.
    Then Create Delivery in VL10B from Supplying Plant...
    Then Do PGI in VL02N from supplying Plant.
    Then do GR at Receiving Plant based on Outbound Delivery at Receiving Plant...
    For Intra-Company STO:
    1)Create one Customer for Supplying Plant Sales area and assign this Customer no with Receiving Plant in OLME---> PO -
    > Set up STO -
    > define Shipping Data for plants. and maintain the same sales area in your Supplying plant.
    2) In OLME---> PO -
    > Set up STO.....for your Document Type: UB and Suppying plant Combination assign Del. Type NL and Checking rule RP
    3) In OLME---> PO -
    > Set up STO...for your Supplying Plant and Receiving Plant combination Maintain Doc. Type : UB
    Make sure you are maintaining Sales View for your Material at Supplying Plant.
    4) Maintain Shipping point at, SPRO----> Logistics Execution -
    > Shipping -
    > Basic Shipping Functions -
    > Shipping Point Determination for Plants.....there for your Loading group,Shipping Condition, Shipping Plant combination maintain Shipping plant..
    Now Create STO in ME21N with Doc.type: UB at Receiving Plant.
    Then Create Delivery in VL10B from Supplying Plant...
    Then Do PGI in VL02N from supplying Plant.
    Then do GR at Receiving Plant based on Outbound Delivery at Receiving Plant...
    Follow the below steps to to make STO between two plants ( different company company codes).It is also called as Inter Company STO.....
    1)Create one Customer Master in XD01 with respect to Supplying Plant Sales Area and assign this Customer no with Receiving Plant in OLME->PO-> set up STO->Define shipping data for plant and for the supplying Plant assign the above sales area.( Make sure,In Customer Master,sales Area Tab: you are maintaining shipping condition)
    2) For Receiving Plant Pur. Org and Co.Code Combination create Vendor master in XK01 and in this vendor master assign the Supplying plant in Pur.Org.Data screen->Extras--> Add.Pur.data
    3) OLME->PO-> Set up STO------>For your supplying plant assign document type NB, Delivery type NLCC and Checking Rule RP
    4)then For your supplying Plant and receiving Plant assign Document type NB
    5)Make sure you are maintaining Sales View for the material at supplying Plant and in Sales /Gen plant Data view maintain Availability check, Loading group and Transportation group.
    6) In SPRo-->Logistics execution> Shipping->Basic shipping functions->Shipping point Determination>assign shipping points-> For your Loading group,Shipping Condition and Supplying plant combination,Assign shipping point
    these are the configuration settings you have to do in background.
    Then Create STO from Receing Plant in ME21N with document type NB.
    Based on that STO, Create Delivery in VL10B from supplying Plant
    Do PGI in VL02N from Supplying plant
    Do GR in MIGO at Receiving Plant keeping Outbound delivery as a ref. document.
    Regards,
    Raghunath

  • Shipping point in STO defined upon storage location

    Hello, all
    On stock transport order I want to set up shipping point in a way that it is determined regarding to storage location I have entered in header of STO.
    Storage location is saved in field EKKO-ZZLGORT (tab Customer data). Now I need solution how to determine or overwrite shipping point when entering items.
    For example:
    . if storage location is 100, shipping point should be AAAA
    . if storage location is 200, shipping point should be BBBB
    I know that shipping point is determined according to combination of Plant-Shipping conditions-Loading group. And it works this way now.
    Is it possible to do this via customizing ? If user-exit is needed please specify which and what must be modified. I'm not a programmer but I know business process. Will get help of programmer if needed.
    I'm looking for this solution because I want to prevent that VL10b puts Stock transport orders with different storage location in header on same delivery.
    Thanx in advance,
    RJ

    Hi,
    You should be able to use METHOD if_ex_me_process_po_cust~process_item to change the shipping point. We've created a customer table in which we've set the corresponding plant, SLOC and shipping point combination which is read during execution of the BADI.
    You can also use METHOD if_ex_le_shp_delivery_proc~save_document_prepare for changing the shipping point in the delivery.
    We've used above for return items. We're on 6.0 as well and for all non return items, standard customizing is available, but not for returns.
    Hope this helps.
    MdZ

  • STO between plant and storage location MRP area

    Dear PP/DS experts,
    For some business requirements, I want to model stock trnasfer order scenario from plant to storage lacation MRP area but the system only make stock trasnfer reservation.
    In my EPR system, I maintainted storage location MRP area material with special procurement 45, then the transportaion lane is created between location 1200(location type 1001) to MRP area 1300(location type 1007).
    My question :
    1) Is it possible to make stock transfer order scenario instead of stock transfer reservation between plant and MRP area ?
    2) If possible, Is there something to do more in master data maintenance except mentioned above in ERP ?
    Thanks in advance for your help.
    Regards,
    Lee, Seung Won

    Hi,
    Yes you can perform intracompany STO (Plant to plant) and STO at Storage location level at the same time,
    We are using same for our client.
    http://www.architectsap.com/blog/sap/how-to-setup-stock-transport-order-between-two-storage-locations/
    Regards,
    Gopala.S

  • Define Shipping Data for Stock Transfers Between Storage Locations

    Hi Guru,
    Can i know what is the purpose to maintain Customer, SHipping data for each storage location for the STO between storage location?
    Purchasing --> Purchase Order -->
    Set up Stock Transport Order-->
    Set Up Stock Transfer Between Storage Locations-->
    Define Shipping Data for Stock Transfers Between Storage Locations

    The Sales org, Distribution channel, Shipping point, Vendor and Customer are maintained to created the delivery.
    It is for the transfer of stock between storage locations with any movement type.
    Eg: When you do a 311 movement type from Sloc A to Sloc B, then it will create a inbound delivery with the Vendor specified for Sloc A and an outbound delivery from Sloc B with the Customer specified assuming the customer and the vendor as the Plant.
    You have to create a internal Vendor and Customer.
    Hope it helps.

  • Making Issuing Storage Location" required entry

    Hi,
    I want to make "Issuing Storage Location" required entry only stock transport order. Our document type is ZUNS. Selection key is UBF.
    In SPRO:
    Material management --> PO -->Define screen layout at document level
    I ve selected "UBF Stock transport order" document type. Selection group is supplying plant. Then I ve marked "Issuing Storage Location" as a required (mandatory) entry indicator.
    Then I ve crated a stock transport order but Issuing Storage Location field is not mandatory. Is there another way make it required entry?

    Hi,
    I believe you will have to activate the settings for STO between storage location, in the setup stock transport order config, Set Up Stock Transfer Between Storage Locations, do the settings,read the IMG documentation if you need help in setting this up.
    Regards
    Chandra Shekhar

  • Storage location to storage location

    Hi all,
    I am doing STO from storage location to storage location in MIGO. While doing so is it possible to get excise tab in migo.   If there any settings for that please let me know..
    Regards
    Mahesh

    Hi
    Excise will be levied only if the material moves from a plant to another plant or a depot.
    If u try to move a material from a storage location to another within a plant  then there will not be any excise involvement.
    Check with ur finance guys .
    Also if u r trying to move ur material to a storage location outside ur plant, then  the same has to created as a plant or a depot and then STO has to be done.
    Basically for India excise comes to paly a role when the material leaves the premises only.
    Check and revert .
    Thx
    Raja

  • Availablity check at storage location level in STO

    Hi,
      There is an unique requirement from my client with respect to the Availability check at storage location level in STO
    Process:
      Based  on the inputs from APO we are creating STR for moving the material from one plant to another plant. These STR’s will be converted into STO through ME59N batch job. During STO creation process system will do the availability check and only if stock is available in the issuing plant then only STO will be generated.
    During this availability check the stock will be considered at plant level and not at storage location level.
    Requirement/Scenario:
    Issuing plant contains two storage location ( location A & B).FG stock exists in both the locations.
    Our requirement is system should create separate line items in the STO based on the availability of the stock in the respective storage locations.
    Example
    Total required qty: 1000  of material X
    material X - Stock in Storage location A  : 600
    material X - Stock in Storage location B : 400
    Two separate line item needs to be created in the STO
    Sl no
    Material
    qty
    Issuing storage location
    1
    X
    600
    A
    2
    X
    400
    B
    Is there any function module available for doing Availability check at storage location level so that it can be called in ME59N with the enhancement.
    Please suggest how to achieve this. If any enhancements needs to be done we will do it.
    Thanks & regards,
    Prashanth

    Hi Nilesh,
    in SAP standard the system is always checking on plant level first and then on the storage location level, there is no possibility to change this behaviour.
    I'm also not sure if the process is correct, because if you have also requirements on plant level only then you would create negative ATP if you confirm on storage location level even though there is no ATP on plant level.
    I'm also not aware of a user-exit that would suite your requirement, additionally according to the IMG documentation the user-exits in the availability check area should only be carried out in agreement with SAP.
    Regards,
    Markus

  • PO number not displaying for STO PO between storage locations in VL10B

    Hi Experts
    I have created a STO PO for stock transfer between 2 storage locations.
    The PO has been created correctly - along with the "Shipping" details aptly.
    However, when I execute VL10B along with the PO, the output screen doesn't show the PO created.
    I have checked various discussions and verified the same. However, I am unable to create the outbound delivery for the PO.
    Please help me on this.
    Best Regards
    Sudhi

    Remove everything from the selection screen (including shipping point and delv. date). Just put the PO in the Purchase Order tab. Check all the other tabs, material, user role etc for extraneous/incorrect info.
    Does the PO appear then?

  • Issuing Storage location in STO

    In the STO process the system is allowing to save the STO without Issuing storage location. But, at the time of delivery creation the system is throwing an error message that Zero delivery quantity is not permitted. Now if the issuing storage location is entered manually then the delivery can be created successfully.
    Please suggest the possible solution to avoid this.

    IMG >  Enterprise Structure > Assignment > Logistics Execution > Assign warehouse number to plant/storage location
    That's a WM configuration, and is irrelevant for picking storage location determination.
    In fact the determination is in the exact opposite direction, SAP will use the plant/storage location to determine the warehouse number, not the other way around.
    The correct path is: IMG -> Logistics Execution -> Shipping -> Picking -> Determine Picking location -> Assign Picking locations.

Maybe you are looking for