STO - Delivery to be created from specific storage location

Hi,
My requirement is after STO creation stock would be consider from a specific Storage Location and if stock is not available in that specified storage location system should throw an error at the time of delivery creation(VL10B) or delivery would be created for the available stock in the specified storage location.
Please advice what configuration to be done to achieve this functionality.
Thanks,
Victor

Dear Venkatesh,
Thanks for your prompt reply,
But I could not find the Storage Location field in Purchase Order Header, checked in field selection layout 'UBF' and in table 'EKKO', wherein a Storage location field is available in Item Overview next to the receiving Plant.
Plz help me out,
regards,
urendra

Similar Messages

  • How to pull inventory from a specific storage location

    Hi guys,
    I wonder how can i determine which storage location should we pull  the stock from ... We have a plant, warehouse and a storage lcoation (XX01) and now i need to create another storgae location (XX02) for the same plant warehouse... now when i create the order system pulls the componenets from same old storage location (XX01)... even though i have inventory in the new storage location ....can somebody guide me how to pull from new storage location. Thanks much

    In addition to helpful hints from other experts, I would like to discuss on other three aspects:
    1.  MRP Run:  This new storage loc is normally operated by production staff before issuing to production orders.  Therefore, some planners do not want to include this stock in the MRP Run.  You can do so by exclude the storage location from MRP (via configuration or material master - set to 1 - Storage location stock Excluded in MRP).  Alternatively, you can plan your replenishment via MRP run by setting with reorder point concept.  You can maintain reorder point and replenishment qty in MRP4 if you create at plant/stor.loc. level and set Sloc MRP indicator to 2 (Stor.stock planned separately).  Then when you run MRP, if stor.loc.stock falls below reorder point, reservration to transfer (311 movement type) is created.  This can be an alternative to the nex point I would like to mention.
    2.  Replenishment:  If you want the production staff to plan replenishment themselves, you can use pull list (MF60).  With the certain setting in the MF60 variant screen, you can create the transfer from store to prod.sloc. or create manual reservation.  Pull list can combine requirements from many production orders, calculate net req. (prod.order reservation - current stock), and perform the replenishment for you. 
    3.  ATP:  Your ATP for component can be set to check the stock at the plant level instead of sloc.level by configuration.  You cannot exclude some of sloc. if you check at plant level though. 
    In terms of material master setup, besides Prod.Sloc.Location in MRP2, you can maintain the stock determination group.  Then, you can add more rules like first from consignment then own stock of sloc. A, then B, then C, for examples.
    Hope it helps.

  • One SO but I would like Post Goods Issue from different Storage Locations?

    Dear All,
    Pls help me solve this issue below:
    I have one SO, Item xzy, Qty = 300 but I would like to Post Goods Issue from different Storage Locations (Qty = 100 for each locations)
    E.g I have 3 storage locations: A, B, C and need to assign Post Goods Issue authorizations to 3 users U1, U2, U3:
    - U1 can Post Goods Issue from storage location A only (but cannot from B, C)
    - U2 can Post Goods Issue from storage location B only (but cannot from A, C)
    - U3 can Post Goods Issue from storage location C only (but cannot from A, B)
    How can I assign the Authorization for users?
    How can I create Outbound Delivery:
    a. 1 SO --> 1 outbound delivery --> Post GI 3 times
    b. 1 SO --> 3 outbound delivery --> Post GI
    Thank you very much for your support
    Cao Huy.

    Hi Senthils,
    Pls see my comment below:
    For Authorization check for storage Location
    1. GO to the following Menu path
    Spro>Material Management> Inventory manangement and Physical Inventory>Authorization Management>Authorization check for Storage Location.
    Here you have activate authorization tick for storage location and plant combination.
    --> Done
    2. Set authorization for Authorization object MM_MSEG_LGO thro Basis for the combination of movement type and storage location
    for each user.
    --> Done
    There are 3 storage locations(A,B,C) in one outbound delivery, and when user 01 tries to Post GI this outbound, it means that the system will Post GI for all line items in this outbound, but user 01 has not authorization for location B, C.
    How can user 01 Post GI from only location A in this outbound???
    And then user 02 will Post GI from only location B in this outbound,
    user 03 will Post GI from only location C in this outbound.
    Thanks
    Cao Huy

  • MM Transaction did not flow to PA - specific storage location with mvt 945

    Dear all,
    When we use movement type 945 to transfer some materials from one plant to another plant, the difference of the inventory value (due to the different standard prices in different plant) are charged to a COGS account.  This COGS account has been mapped to a value field (Inventory adjustment value field) in PA transfer structure.  The business transaction RMWL has been checked for "relevant to legal update" using SM30 - V_TKE_BUS_TRANS" (we are on SAP 7.1 patch level 6). 
    This MM/FI value flow issue only happen to the stock transfers from this specific storage location with this movement type 945. 
    I don't see whether or where to specify storage location in PA configuration.  The plant has been added to "assign costing keys to any characteristics".
    Can you please let me know what the cause might be?
    Thank you so much!
    Jennifer

    Dear all,
    When we use movement type 945 to transfer some materials from one plant to another plant, the difference of the inventory value (due to the different standard prices in different plant) are charged to a COGS account.  This COGS account has been mapped to a value field (Inventory adjustment value field) in PA transfer structure.  The business transaction RMWL has been checked for "relevant to legal update" using SM30 - V_TKE_BUS_TRANS" (we are on SAP 7.1 patch level 6). 
    This MM/FI value flow issue only happen to the stock transfers from this specific storage location with this movement type 945. 
    I don't see whether or where to specify storage location in PA configuration.  The plant has been added to "assign costing keys to any characteristics".
    Can you please let me know what the cause might be?
    Thank you so much!
    Jennifer

  • Transfer material from one storage location to another storage location

    Is there any bapi  to transfer material from one storage location to another storage location

    Hi,
    You need to use the below BAPI
    BAPI_GOODSMVT_CREATE
    Regards
    Sudheer

  • How to block movement type 261 and 262 from several storage locations

    Dear Expert,
    Can we block the  261 and 262 movement type from several storage locations? These storage locations are not affected by the MRP run, where for the materials that have been moved to these storage locations their existance are not count. These storage locations could not be used for confirmation production order, therefore i want to block  261 and 262 movement type from these storage locations.
    Thanks
    Pauline

    Dear Pauline,
    if my understanding is correct abt ur query,
    1) you want in confirmation screen, Consumption should happen only from one storage location
    2) Rest all storage locations should not be allowed
    3) Maintain Storage location in BOM component view, in mass you can maintain in CEWB
    4) Now GO with SHD0, Make storage location field as Out put only, for CO11N Transaction
    Plz refer this link for SHD0 Demo
    [https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/transactionVariant-AStepbyStepGuidefor+Creation]
    Regards
    Madhu Kumar

  • SAP AFS - VL10B delivery from specified storage location

    Dear all,
    I have created STO for an AFS material.
    As this material is available in various storage locations of the supplying plant.
    Now I am trying to create delivery through VL10B, entered the Purchase Order, Plant and specific location in the material tab, but system is not generating any outbound delivery in the background.
    again, in VL10B, if I have not specified any storage location in the material tab, system is generating the Outbound delivery for multiple storage locations with reference to batch split.
    How come system is not picking the specified storage location in VL10B transaction.
    Can I specify the issuing storage location while creating the STO, so that during VL10B, automatically the system will pickup the same storage location.
    thanks in advance,
    urendra

    Dear Urendra,
    If you creating a delivery for an AFS material, system picks the stocks based on the allocation rule defined in the system. Hence first efine the allocation rule in the system.
    To achieve the functionality of issuing stock in case of a STO from a
    particular storage location kindly maintain the below customizing.
    1) Go to transaction J3AS -> arun detail -> define allocation logic ->
    stock sorting
    3) Here maintain a stock sort rule .
    5) To this sort rule you can assign fields in this case it would be
    LGONR with field values EW and QA
    6)Once that is done, give the priority to the storage location in
    accordance to your requirement.
    7) Assign this sort rule to the main Arun type following the
    path J3AS-> ARun type-> here select Arun type and then under allocation tab
    go to the allocation rule maintained , out here there is the option
    stock sorting.
    Once this is done the storage location picked would be in the order
    of the above mentioned priority.
    Only if there is no stock in storage location of higher priority
    will the stock be then picked from storage location of lower priority.
    I hope this helps.
    Regards,
    Rakesh

  • Calculating  PO Delivery Date when created from PR

    Hi,
    When a PO is created with reference to a PR, the "delivery date" is copied from the PR. However, if the PR has been unprocessed for 7 days, the delivery date is now effectively old.
    So is it possible to change the settings so that instead the delivery date is always calculated from lead time either in PIR or material master, so it is always accurate.
    For example:
    Requisition created on 1st July for delivery 1st Aug based on lead time.
    PO created after 1 week - on 8th July - delivery date in PO is 1st Aug - unless changed prior to printing manually.
    Please advise,
    Thanks.

    do you really think that this is the way to improve the situation.
    Instead of changing SAP, you should speed up your buyers.
    If the material is needed on August 1st.
    Then the delivery date of august 1st + 7 day for sleeping buyers  does not meet the requirements of the planner.
    Maybe you should think about extending the lead time with the sleep time (purchasing processing time), so MRP can plan more accurate the next time.

  • Has anyone picked materials from one storage location but confirmed TO to different storage location?

    The business does not want to use MRP areas to segregate materials between service part and production. What they want to do is separate service parts on deliveries at our shipping storage types (915/916) from MRP view. This requirement is primarily for our international shipping area. We may pick parts for an international shipment and the parts will sit on the delivery - not goods issued because we don't want to invoice - for up to 3 months. During that time, MRP sees the inventory so replenishment is not done in a timely fashion or parts may get stolen from the shipment for a production requirement because the inventory is seen.
    Could one solution be to create a non-MRP relevant storage location (say 1200) and place the shipping storage types in this storage location?  Then when the transfer order creates, the system would show the source to be from the MRP relevant SLoc (1100), stype (130), bin (A-01-A), - these are examples - with the destination to be to non-MRP relevant SLoc 1200, stype 915, bin (dynamic using the delivery number) 0080745298? Has anyone had this type of request or know of a way to satisfy the business requirements without different MRP areas? They also do not want to have two transfer orders - one with a 601 movement and one with a 311 movement.
    Any known solutions or outside-the-box thinking would greatly appreciated.
    Marla

    I don't have the solution, just some critical questions and hints
    Even a non-MRP relevant storage location can be warehouse managed.
    The stock is shown in any stock list as long it is not goods issued, no matter if it is stored in a
    non-MRP relevant storage location.
    Stock that is picked for a delivery is not available for others, it is reserved. A delivery is a MRP element and hence should be taken into consideration in the planning run.
    A non-MRP relevant storage location will only solve your planning issues if you move the material there if it is not yet picked  and allocated to a delivery.
    Do your thieves really use SAP to check if the stock is there, or do they just see the stock in the warehouse? As said, the non-MRP relevant storage location will not solve this issue since the stock is still visible.

  • Where data come from in storage location automatically?

    Hi!
    In SPRO, if I select  the storage location automatically option (in movement type and in plant), when the systems creates the data automatically, where the data comes from?
    Thanks in advance.

    in the moment when you perform the first movement to this storage location, then SAP will extend the material master. Most fields in the material master storage location view are not storage location specifc, the are kept at client or plant level. Only a few fields are storage location specific. you either have to complete those fields later manually or you must not activate auto storage location creation .

  • While doing delivery batch is showing in two storage location

    Dear All,
    I have following senario in WM:
    First I will create Packing order for my End product, here batch will generate.
    For this Material Quality is active that is Insp type 04.
    Here i will do LT10- I will transfer to Final Bin that is Finish Goods storage location say SL01.
    After this i will go for QA32 and here I will cleare the quality and transfer to FG storage location SL02.
    Now i will check the stock for the batch. but here i am observing the stock for the batch one is with stock indicator with 'Q' and one more stock without 'Q'
    Now I want to delivery the material how i can delivery? here i am getting that material in two starage locations SL01 and SL02.
    here which one i should consider for delivery.
    Please guide.
    Thanks in advance.

    Are you talking aobut storage locations or storage bins?
    First I will create Packing order for my End product, here batch will generate.
    For this Material Quality is active that is Insp type 04.
    I guess this posts the receipt into Q status in storage type 901 with dynamic bin of the packing order.
    Here i will do LT10- I will transfer to Final Bin that is Finish Goods storage location say SL01.
    So you move your goods while they are in Q-status.
    After this i will go for QA32 and here I will cleare the quality and transfer to FG storage location SL02.
    Now i will check the stock for the batch. but here i am observing the stock for the batch one is with stock indicator with 'Q' and one more stock without 'Q'
    QA32 resets the Q-status at IM level.
    If you have not yet changed the status in WM too, then you transfer just unrestricted use stock to your final bin, hence you have your batch in to different bins, one with with q status and one with unrestricted use status.
    You have to execute LU04 to process the status transfer as well in WM.  This will then clear the situation. Best is to o this before you move stocks.
    Now I want to delivery the material how i can delivery? here i am getting that material in two starage locations SL01 and SL02.
    here which one i should consider for delivery.
    you can only consider unrestricted use stock in the bin where the material physically resides.

  • How to restrict Stock posting in Specific Storage Location

    We Want to restrict posting of cenvet creadit taken material to specific storage loacation at time of GRN (MVT 105)

    HI
    IMaterial master view in mrp-2 view there is option to procurement for EP. here you specify the storage location so while posting the GR system pick the same sto location.
    which material you want to post just make the changes in mmr.
    creation of user wise authorization  also you can reach this with help of basis.
    laxman

  • QI stock from one Storage location to other

    I have a scenario where QM is implemented and Material is received in storage location "A" against purchase order through movement type 101.But for testing we need to send material to storage location"B"for testing. I want to send the material under inspection lying in storage location "A" to "B" for testing purpose. Is it possible to move stock under quality inspection , If yes through which movement tyep. Is there any process in QM which allows the stock under quality inspection to move.
    Thanks in advance
    Regards,
    Jeewan

    hi
    Goto MB1B and try with this movement types
    311 Transfer posting storage location to storage location in one step
    The quantity is transferred from unrestricted-use stock of the issuing storage location to unrestricted use in the receiving storage location.
    Possible special stock indicators: E, K, M, Q
    313 Stock transfer storage location to storage location in two steps - removal from storage
    The quantity is transferred from unrestricted-use stock of the issuing storage location to stock in transfer in the receiving storage location.
    Possible special stock indicators:
    • K Goods receipt for purchase order to consignment stock
    • O Goods receipt for purchase order to stock of material provided to vendor
    • E GR for purchase order or order to sales order stock
    • Q GR for purchase order or order to project stock.
    Regards

  • Mail: How to check an account ONLY from specific Network Location?

    I use multiple macs, and use my .mac account to synchronize mail accounts, rules, smart mailboxes, signatures, etc.
    However, I'd actually like to specifically NOT check certain accounts on some machines.
    Even though the account settings are synced, I thought I might be able to take advantage of "Network Locations" to create specific network locations like HOME or WORK and thusly create a combination of mail and network location preferences that would solve my particular need. The idea being that it would allow me to specify in mail's settings (somehow) that a particular mail account should only check the server for messages if the current network location is actually WORK, and if the network location was HOME, it should just not check.
    Some other apps (ie: Snerdware's Groupcal) will check the network location setting and not perform checks if the current location is not the expected one.
    So the question is, is there some way to make Mail.app 2.1.3 on Tiger do this?

    30 messages displayed is the default, but you can change that.  On your email page, under "settings" is an option to change the number of messages per page.  One  option is "no limit."

  • Material transfer from one storage location to another storage location

    HI
    ISSUE : Actually we have to post 4 no's from storage location 1500  FNWP to 1500  BSTR
    .by MB1B T.Code.But System takes 1,001.96gms  automatically. *( movement type 911  E ) (  they want to post in units EA )*
    Solution : In material master data classification tab given material conversion so when we raise mb1b then automatically it is converted to GRAMS
    Is it correct ?

    what is the base unit of the material?
    EA
    are UNE and EA maintained as alternative units?
    sorry i dont know une meaning but in material master data in addition tab they maintain conversion from EA to Gram.
    what is the unit used in the the sales order?  
      EA

Maybe you are looking for

  • Multiple Digital Signatures in one Form

    Hello I have an Interactive Forms that requires the digital signing of 6 different users. There is a control under the Web Dynpro Native named : Signature : Sign and Lock which allows multiple signatures but I am not able to use it correctly. I need

  • Should I buy an Iomega USB Zip drive for my Mac G5?

    Zip disks are handy for doing routine backup of genetal documents such as Word and Excel files, unlike CD-R's where after one use they are done and just have to be thrown away. I had a zip drive with my old G4, but some people give the latest model o

  • Firefox is not allowing certain websites to load can sign in remotely to make sure it is installed correctly and completely?

    Can you sign into my computer remotely to make sure that I've installed firefox correctly and completely. I seem to be missing plugins, adobe, java, fire fox won't allow me to download them. On certain websites I'm getting error messages.

  • Strokes overlapping in Illustrator CS5

    Hello, I'm having a problem with the overlapping strokes in Illustrator CS5. It's a bit difficult to explain but, basically, I need one end of a stroke to go beneath another stroke, but the other end of the stroke has to go on top of something. Here'

  • APEX and RS232

    Hello, Can APEX capture data from RS232 serial communication? Thank, Tom