STO DIFFERNCE BETWEEN UB AND NB

HI all
can someone plz tell me the differnces between po type NB and UB
and y do we use UB for Intra Company and NB for Intercompany
where exactly is the contrl\ol
olz clarify

hi
UB: If the supplying plant and Receiving Plant belong to the same company code. then we use UB document type.
If you use own document type you should ensure transport control field.
NB : If the Supplying plant and Receiving plant belong to different company code then use document type NB.
difference : IF the company need billing document for stock transfer use NB document.
else use UB document for the stock transfer .
regards
murali

Similar Messages

Basic differnce between 000 and 001 clients.

what is the basic differnce between 000 and 001 clients?
why do we use client 000 as source client while client copy?

Hi Kumar
The basic difference between Client 000 and Client 001 is that Client 000 is client independent instace while Client 001 is Client dependent.
Client 000 is SAP source client while Client 001 doesn't exits for every installation.
Regards
Shashank

Differnce between unicode and non unicode

Hi every body i want to differnce between unicode and non unicode and for what purposes this ulities are used explain me little brief what is t code for that , how to checj version, how to convert uni to non uni ?
Advance Thanks
Vishnuprasad.G

Hello Vishnu,
before Release 6.10, SAP software only used codes where every character is displayed by one byte, therefore character sets like these are also called single-byte codepages. However, every one of these character sets is only suitable for a limited number of languages.
Problems arise if you try to work with texts written in different incompatible character sets in one central system. If, for example, a system only has a West European character set, other characters cannot be correctly processed.
As of 6.10, to resolve these issues, SAP has introduced Unicode. Each character is generally mapped using 2 bytes and this offers a maximum of 65 536 bit combinations.
Thus, a Unicode-compatible ABAP program is one where all Unicode checks are in effect. Such programs return the same results in UC systems as in non-UC systems. To perform the relevant syntax checks, you must activate the "UC checks" flag in the screens of the program and class attributes.
With TC: /nUCCHECH you can check a program set for a syntax errors in UC environment.
Bye,
Peter

Differnce between portal and collaboration

Hi All
What is differnce between portal and collaboration & uses as well?
Thanks in advance
Raja.S

Periodic billing is used when you want to bill the customer at different points of time based on the periodicity or progress of the work. Milestone billing can be used for this type of billing purposes when you want to have billing control from the project.
Resource billing is based on the resource consumption for the particular activities. Dynamic Item Processor (DIP) profile is used for the resource related billing.
Further information acn be had from the link
[http://help.sap.com/saphelp_47x200/helpdata/en/aa/96853478616434e10000009b38f83b/frameset.htm]
Hope this is of some help
Venu

Differnce between MMPV and OB52

Wat is the differnce between OB52 and MMPV,
Thanks
Ramki

Hi Ramki,
This question has been answered already in several threads before.
Please use the search before posting new threads.
Hi Priyanka,
Sam has already answered the question.
Why are you replying with same answer and requesting points for that please do not do that.
Thank you

Differnce Between /n and /BEND

Hi,
Differnce Between /n and /BEND?
thanks and regards
sarath

Hi ,
/n ends the particular transaction .
/bend - This means batch end .
This comes only in BDC concept .This is where you transfer data from the legacy system to sap R/3 system .When you are performing recording process and you dont want to continue any more you give /bend .

Differnce between periodic and Resourse billing.

Differnce between periodic and Resourse billing, and how to do it in sap?..
Can anyone suggest me step wise
Thanks in advance

Periodic billing is used when you want to bill the customer at different points of time based on the periodicity or progress of the work. Milestone billing can be used for this type of billing purposes when you want to have billing control from the project.
Resource billing is based on the resource consumption for the particular activities. Dynamic Item Processor (DIP) profile is used for the resource related billing.
Further information acn be had from the link
[http://help.sap.com/saphelp_47x200/helpdata/en/aa/96853478616434e10000009b38f83b/frameset.htm]
Hope this is of some help
Venu

Differnce Between OBIEE and BO And Cognos

Hi experts.
I would like to know the differnce between OBIEE , BO And Cognos. Is there is any white paper regarding this.
Thanks in advance
Regards
Frnds

Hi Friend ;)
Check out this.. http://www.forumtopics.com/busobj/viewtopic.php?p=543325&sid=21c3e9a1b9dd85679d5e51c335b8a74e
also http://oracle.ittoolbox.com/groups/strategy-planning/oracle-projectmanagement/what-is-obiee-1681803
Thanks & Regards
Kishore Guggilla
Edited by: Kishore Guggilla on Nov 20, 2008 11:52 AM

Differnce between exception_init and init_exception

I have declared an usernamed exception and wanted to call...
I came to know that these can be called by using two of the below -
Pragma Exception_init
Pragma Init_Exception
What is the differnce between[b] exception_init and init_exception ? And where they can be used ?
awating for your rresponse ..!

Oracle Database 10g Enterprise Edition Release 10.2.0.3.0:
SQL>declare
2     my_exception exception;
3     pragma exception_init(my_exception, -20101);
4 begin
5     raise my_exception;
6 exception
7     when my_exception then
8        dbms_output.put_line(sqlerrm);
9 end;
10 /
ORA-20101:
PL/SQL procedure successfully completed.
SQL>declare
2     my_exception exception;
3     pragma init_exception(my_exception, -20101);
4 begin
5     raise my_exception;
6 exception
7     when my_exception then
8        dbms_output.put_line(sqlerrm);
9 end;
10 /
   pragma init_exception(my_exception, -20101);
ERROR at line 3:
ORA-06550: line 3, column 11:
PLS-00127: Pragma INIT_EXCEPTION is not a supported pragma

Differnce between sync and async webservices

All,
What is the difference between sync and async web services?
Actually i am looking for a web service, which doesn't return a response. is this achievable?
Thanks

SRAVZ wrote:
What is the difference between sync and async web services?from a webservice protocal perspective there is no difference. you still make a request and get a response. the difference is in what the initial response contains. in a synchronous call, the initial response will contain the final result. in an asynchronous call, the initial response will not contain the final result, but may contain some sort of "ticket" which can be used in a subsequent call to get the final result. generally, the client will need to poll the webservice until the final result is available.
Actually i am looking for a web service, which doesn't return a response. is this achievable?it's not really possible to not return any response. http is a request/response protocol. if you don't have any data to return, then the response will be fairly minimal, but it will still exist.
Edited by: jtahlborn on Dec 2, 2012 9:22 AM

Differnce between requestor and preparer

Hi,
Can u please any one give the description of purchase requisition details.
I have one doubut how to find the requetor and preparer of perticular requisition ,where is stored in data base.
what is the derfernce between requestor and preparer.
i know only preparer is nothing but buyer hwo ever create the requisition it is stored in po_requisition_headers_all column as preparer_id,\
But i don't know what is requestor and where it is stored.
Thank's

Preparer id is at the req. header level. It is the employee id of the person who actually types in the req.
Requestor id is at the line level. It is the employee id of the person who actually requested the material.
In a lot of companies, a manager will request material but his admin will type the req. Here the manager is requestor and the admin is the perparer.
Hope this answers your question
Sandeep Gandhi
Independent Consultant
513-325-9026

Differnce between jre and container

This may be a silly question, but i want to know what is the difference between jre and a container?

gtkrish wrote:
yes i am specifying about containers like sevlet container , it also does the job of executing code,right?No. The JVM is executing the code (insofar as the JVM ever actually executes anything). The container simply manages some of that code for you, and provides services to your code, such as JNDI

Differnce between KE24 and VA05

Hi,
I found that the customer wise information is not macthing between KE24 and VA05. Infact the total seems to be matching, while the individual customers seems to be getting consolidated to a few customers.
This has started happening only recently.
Can any one tell me why is this happening.
Regards,
Arun

Periodic billing is used when you want to bill the customer at different points of time based on the periodicity or progress of the work. Milestone billing can be used for this type of billing purposes when you want to have billing control from the project.
Resource billing is based on the resource consumption for the particular activities. Dynamic Item Processor (DIP) profile is used for the resource related billing.
Further information acn be had from the link
[http://help.sap.com/saphelp_47x200/helpdata/en/aa/96853478616434e10000009b38f83b/frameset.htm]
Hope this is of some help
Venu

Differnce between RPC and RMI

Hello,
Can anyone please tell me in detail the difference between RPC and RMI? If possible can you pls give examples?
Thanks in advance.
KiranJyot

Thank you for the reply.
Yes, I did google about this. But, it was not clear to me. I did ATM application using both RPC and RMI. Even though, it worked fine and did not lose points in my assignments, unfortunately the concepts were not clear.
Can you please explain me what does it meant by - there is objects involved in RMI. In RPC, invoking functions is done through a proxy function. It will be great if you can explain it using ATM application.
Regards,
KiranJyothi

Differnce between jstl and struts

hi friends
Can anyone one tell me the difference between struts and jstl.
Let me know which one is most suitable to use.
thanks in advance

Is google not installed on your machine?
Struts and JSF are both web application development frameworks. Both have advantages/disadvantages. Google around for comparisions. There are many around the internet.
JSTL is a library of useful custom tags for JSP. It enables you to avoid using scriptlet code in JSPs.
Struts and JSTL are not mutually exclusive. In fact they work quite well together.
JSF and JSTL don't play so well together. That may have changed with the JSP2.1 unified expression language, but if you're writing JSF, you normally don't need JSTL tags.
Cheers,
evnafets

STO DIFFERNCE BETWEEN UB AND NB

Similar Messages

Maybe you are looking for