STO from GR Blocked to Gr Blocked
Hi,
We have one scenario in which HQ procures a material and tranfer it to different sites.Client want that material is not be valuated till its accepted by the sites.
So I want to receive material at HQ in Gr blocked stock .
But my question is
Can we create a stock transport order from one plant (Gr Blocked) to another Plant (Gr blocked).
Please Suggest the possible solution.
Regards,
Vijay
hi,
Always the transfer is possible from unrestricted use to unres. use only....
You can do b/w these and later post to Gr blocked stock....
ie.
1. release mtrl from gr block stock to UNrestricted use...in plant 1...
2. then posted to plant 2 to unrestricted use...
3. then move it to gr block stock in plant 2..
hope it helps..
Regards
Priyanka.P
Edited by: Priyanka Paltanwale on Sep 24, 2008 8:35 AM
Similar Messages
-
I keep getting calls from a block caller id and it's some dude speaking arabian what do i do? How do i stop this?
Stop answering calls with blocked numbers. If it's someone who really wants to talk to you, they'll leave you a message and you can call them back.
-
Report for released orders from credit block
Dear Friends,
Can you tell me any report which can give us the list of released sales orders from credit block with user ID (who released) and date (when released). If no standard report is availble then please give me the table where this data gets stored, so that I can create a query.
Thanks in Advance,
Sreehari.Dear Krishnan,
Thank you very much for your immediate response...................
With VBUK-CMGST (D) we can get the list of orders which were released from credit block, but I require the ID and Date (who released and when relaesed).
I hope my requirement is clear.
Thanks & Regards,
Sreehari. -
Is it possible to delete data from a block based on a view?
I have a data block based on a view. I have set the delete allowed property to 'yes' using the object navigator, have set the database permission to allow delete, done a search through all the code to see where the delete_allowed property on the block may be reset in some trigger yet cannot delete records from the block.
Any ideas?There are at least two/three ways to do this...
Put an on-delete trigger on the block of the view with code something like this...
delete from mytable where mytable_id = :myblock.mytable_id;
...or...
dont do the above and add an instead of trigger to the view in the database. The instead of trigger intercepts the delete statement that would fail and executes code that you write in the trigger to go delete in mytable "instead of" the view.
... or...
if you want to base a block on a procedure.. See this thread... Notice the metalink id in the thread..
Re: Data block based on a procedure..
Message was edited by:
Mark Reichman -
What is the best way to filter an IP from being blocked?
What is the best way to filter an IP from being blocked by a false positive? Event Action Filter?
I'll assume you really mean "blocked" as opposed to "denied". You can either create an event action filter and subtract the blocked action, or you can add the address to the "never block" addresses.
-
I need to remove the following string "Price: $5.80-" from
text block listed below... I have a bunch of text blocks similar to
this one listed below, but they all have this sort of string in
them ("Price: $5.80-")... Each text block has a "Price" and end an
"-" mark... Is there anyway to strip this line out of everyone of
my listings...
M635
Small Smooth Ring Pull w/backplate in Patine Black
Height: 1 3/16"
Width: 1 3/16"
Projection: 1 3/16"3/4"
Base Material: Steel
Screws: Screw Pack
Price: $5.80-
Thank for the help!!!In the code below, I assume the "Price" will be on a separate
line. -
Printing the Package output from Anonymous block
Hi,
I need to call the below package from anonymous block and get the output.
Could you let me know.
I tried using this, but i don't get data.
===========Anonymous Block=====================================================================
declare
var xxdc.xxdc_sr_log_his_pkg.sr_tbl_type;
l_sr_idx_bi BINARY_INTEGER := 0;
BEGIN
xxdc.xxdc_sr_log_his_pkg.service_record('14040',var);
dbms_output.put_line('CLAIM_CREDIT_OFFERS :'||var(l_sr_idx_bi).qa_credit_offers(l_sr_idx_bi).character1 );
end;
=============================================================================================
============================================================================================
Package Spec
TYPE cr_offer_type IS TABLE OF apps.qa_results_v%ROWTYPE
INDEX BY BINARY_INTEGER;
TYPE sr_rec_type IS RECORD
(task_status apps.jtf_task_statuses_tl.name%TYPE
,task_type apps.jtf_task_types_tl.name%TYPE
,qa_credit_offers cr_offer_type
TYPE sr_tbl_type IS TABLE OF sr_rec_type
INDEX BY BINARY_INTEGER;
PROCEDURE service_record(p_service_req_num IN VARCHAR2
,p_service_req_tbl OUT sr_tbl_type
Package Body
FOR emp_row_rec IN cur_credit_off
LOOP
l_sr_tbl(l_sr_idx_bi).qa_credit_offers(l_sr_idx_bi).character1 := emp_row_rec.character1;
--dbms_output.put_line( l_sr_tbl(l_sr_idx_bi).qa_credit_offers(l_sr_idx_bi).character1); --commenting for testing
l_sr_idx_bi := l_sr_idx_bi + 1;
END LOOP;
p_service_req_tbl := l_sr_tbl;
=============================================================================================
ThankHi,
Did you issue the SQL*Plus command
SET SERVEROUTPUT ON
or, if you're using some other front end, its equivalent?
Can you ever see output from dbms_output? For example, what happens when you run this?
SET SERVEROUTPUT ON
BEGIN
dbms_output.put_line ('Hello, world!');
END;
Since I don't have your tables, I can't actually run your code. If you'd post CREATE TABLE and INSERT statements, or re-write the package to reference commonly available tables, such as those in the scott schema, then I could test it. -
Is there a way to get photo from a blocked "Photoshop Album 3.0" with Ps?
Is there a way to get photos from a blocked "Photoshop Album 3.0" with Ps?
If you are on a Mac, you can use File Juicer to extract image files from just about anything.
Next time you post, please give more specific details.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, including total VRAM installed, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you (not necessarily this poster).
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
How can I see messages that where sent from a blocked person?
How can I see messages that where sent from a blocked contact?
Nohemi911 wrote:
How can I see messages that where sent from a blocked contact?
You don't that is the reason you blocked that person so you won't see the message. -
I have Problem in fetching data from CONTROL BLOCK
Sir,
I am facing problem in fetching data from control block.
Asif.is your control-block a filter-block for the detail-block?
Do you want to see only the detail-data of the user-id you have displayed in the master? -
Transfer posting from consignment blocked to unrestricted blocked
Hi All,
I need a movement type to move stock from consignment blocked to owned blocked in one step.
is there any way to change either movement type 325 K or 411 K ?
I know I can do it using 2 movement types, but I need just one.
Regards,
CDYou can only create new movement types by copy of existing movement type, hence you cannot do in one step what is not designed that way by SAP.
-
CO-PA characteristics population from coding block
Hi I have defined couple of custom fields in my coding block (GL field extensions).
Users will be populating these fields while posting the document.
Is there nay way ( config, substitution or user exit ) thru which we can populate these fields in profitability segment ( CO-PA characteristics )?Hi,
I reckon that you would like to have attributes in those custom fields as COPA characteristic? if so, firstly you would need to add a Characteristic to Operating Concern and Segment.
Are the values in those custom fields in your coding block being derived from other attribute, for example, material master or customer master? If that is the case, you would be able to use Derivation or Table look up.
If that is not possible to derive or look up from a table and need to transfer from coding block, you may explore the possibility to activate SAP enhancement COPA0001.
Hope that helps
taro -
Hi all ,
I have tried unix command from PLSQL Block,
Please see the code.
DECLARE
stat INTEGER;
host_command varchar2(100);
errormsg VARCHAR2(80);
command varchar2(2000);
BEGIN
command:='touch /home/oracle/testting.txt';
dbms_pipe.reset_buffer;
host_command:= dbms_pipe.unique_session_name;
dbms_output.put_line('host_command:'||host_command);
dbms_pipe.pack_message(command);
dbms_output.put_line('pack message:'||command);
stat := dbms_pipe.send_message(host_command);
dbms_output.put_line('stat:'||stat);
IF stat <> 0 THEN
raise_application_error(-20000, 'Error:'||TO_CHAR(stat)||' sending on pipe');
END IF;
stat := dbms_pipe.receive_message(host_command);
dbms_output.put_line('stat2:'||stat);
IF stat <> 0 THEN
raise_application_error(-20000, 'Error:'||TO_CHAR(stat)||' receiving on pipe');
END IF;
dbms_pipe.unpack_message(errormsg);
dbms_output.put_line('errormsg:'||errormsg);
IF errormsg <> 'SUCCESS' THEN
raise_application_error(-20000, 'Execution error: '||errormsg);
END IF;
END;
Nothing happend from this code just getting only following result with error.
-----------------result-----------------------------
host_command:ORA$PIPE$002D19820001
pack message:touch /home/oracle/testting.txt
stat:0
stat2:0
errormsg:touch /home/oracle/testting.txt
DECLARE
ERROR at line 1:
ORA-20000: Execution error: touch /home/oracle/testting.txt
ORA-06512: at line 33
Can any one tell me what i doing wrong in this code.
I m working on Oracle 11g and AIX unix server.This is the forum for the SQL Developer product, not for general PL/SQL questions. There is a link to the SQL and PL/SQL forum in the announcement at the top of this forum.
-
Sales order released from Credit block, but Purchase Requistion not created
Hi,
In third party sales scenario based on Scheduline Line category configuration purchase requistion creates when the order is created. If order is blocked for credit check then purchase requistion will not be created until order released from credit.
Here my scenario is
I have two users like A and B. When A releases the order from credit block by using transaction VKM1, Sales order releasing from credit and creating Purchase requistion. But, if the order is released by B, Sales order is getting released from credit but purchase requstion is not getting created.
There is no issue from security side, we activated trace and analysed everything it is not security issue.
Thanks and Regards
Alokam Chandra SekharHi Lakshmi,
Thanks for reply. I followed your instructions, pls find my observations below.
1. Can you check the below settings:
What is the Credit status in the header status tab page of the sales order for the B's sales order?
Is it "Not approved or releasedu201D If it is not approved, you might have released the sales order in VKM3, but you might not have saved it.
Reply: We are releasing order through VKM1 and after releasing the order the status is showing as "Released".
2. Did you use the same material for B's Sales order? If it a different material check the Item category and Schedule line category whether these are same with A's sales order.
Reply: Both the orders has same information, like material Item category and scheduline category
3. Check in the Schedule line tab page --> Procurement button whether you have maintain vendor, Source determination and Info record.
Source list has been verified through ME03 transaction and vendor data maintained correctly.
I really appreciate your time and efforts on this.. looking forward some more suggestions...
Thanks and Regards
Alokam Chandra Sekhar -
How to load DataBlock based on the Multiple Condition from another block
Hi
How to load a Data Block based on the Multiple values from another block. For eg.EMP is the Master Data block and SAL is the child Datablock.When query JOS% in the Master Block(EMP) then display all the Sal details in the SAL block for all the employees starting with JOS , When clicking one buton or if it is possible in the loadin of the MasterBlockHi,
I presume you are using database block relations.
Put automatic query = yes in relation properties.
Do you have block level trigger ON-POPULATE-DETAILS?
In that you can find the relation and query - Using built-ins
Find_Relation and Query_Master_Details
Maybe you are looking for
-
Formatted on Mac OS === how to use on Windows
I´m traveling, and want to use my ipod 4G on my friend´s computer - windows xp. But when I connect the ipod, iTunes says this "iTunes has detected an iPod formatted on Macintosh. You must reformat this iPod to use it on XP". Is this for real???? Is t
-
Batik error in Builder 3b2 on OS X
I've been trying to work through the Flex tutorial at http://learn.adobe.com/wiki/display/Flex/1d.+RIA+Tutorial, but when I finally tried to compile, I got an error message saying there was an internal build error, and I should check the Error Log. H
-
QX10 Crashes on Android 4.4
Purchased a QX10 to use with my Nexus 5 running Android 4.4. The PlayMemories app crashes on connect to the device. It appears Sony was using an unpublished NDK API in development of the application, and now the API has eitehr been removed to gone pr
-
Express Document Update was teriminated received from author
Hi Experts, After posting documents in f-55,while updating document its showing pop-up error 'Express Document "update was terminated" received from author'. I had checked in SM13- its showing document no does not exist. then we checked SNRO t-code f
-
How do I go from 10.6.8 to lion? :)
Hey guys, I would REALLY love help with this. Last time I asked a question no one answered after 2 days. Hopefully this can get answered neatly and fast my question is as simple as it can get: Is it possible to go from 10.6.8 to lion? I do not wish t