STO from MRP area to MRP area

Is it possible to confirgure the system to create stock transfer orders from one MPR area to another MRP area? I know that you can go from plant to MRP area and MRP area to plant.  We would like the material shortages, found in the planning plant/mrp area to pass the STO to to procurement plant/MRP area. We want the STO at the MRP area level and not at the plant level of the procurement plant. 
Thank you for your responses.

Hello
If you want to have stock transfers generated by MRP, you must assign a special procurement type. Also, make sure that, on the special procurement type customizing, you have defined the supplying plant.
If you want to have the issuing storage location determined by MRP, please read carefully the WIKI below:
Issuing storage location on stock transfers created by MRP and BAdI MD_EXT_SUP - ERP Manufacturing (PP) - SCN Wiki
BR
Caetano

Similar Messages

  • MRP areas and MRP controller..

    In a plant if there are some 100 x materials and 100 y materials..
    The requirement is when the 100x materials are planned ,The 100 y materials should not be planned(i e 100 y materials should not be considered in planning). How to map this in MRP.
    I have heard that using MRP controllers or MRP areas this can be achieved.But I don know how?
    If anybody cud help me in how to proceed this?

    HI
    This can be achieved through the user exit in MD01 based on MRP controller assing different MRP controller for X and Y material and with the help of ABAP you can use exit in MD01 and run mrp  with that  exit in MD01
    sorry the user exit which is used in my scenario which is  same as of yours is M61X0001 as Suggeste by Mr Mangalraj
    Regards
    Anupam Sharma
    Edited by: anupam sharma on Nov 26, 2009 11:15 AM
    Edited by: anupam sharma on Nov 26, 2009 11:17 AM

  • RIMODINI for CIF Object: [MRP Area Matl, MRP Areas]

    Hi Experts,
    We have Material maintained at MRP areas in R/3. Integration model is maintained with CIF object : [MRP Area Matl, MRP Areas] to bring the new material master at MRP Area changes through Delta mode(CFM3), but the changes to existing material in Integration model at MRP Area does not come over immediately to APO and not through DELTA mode.
    We have to execute Report: RIMODINI to bring the changes of existing material master changes at MRP Area level to APO. Since its a performance intensive it takes too long  to execute to bring changes over to APO.
    Is there alternative method of bringing the existing material master changes at MRP area level for CIF object : [MRP Area Matl, MRP Areas] to APO without executing RIMODINI.
    Additional Information: R/3: SAP_APPL     470     0030     SAPKH47030
                                     R/3: PI                2004_1_470     0015     SAPKIPZI5F
                                    APO:SCM                    500     0012     SAPKY50012
    Thanks,
    K Sendil Kumar
    Thanks,
    K sendil Kumar

    Hi Sendil,
    Are you getting this error only for Material or other master data also?
    Please can you quickly check below mentioned checks:-
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/scm/cif
    Regards
    Samir

  • MRP Areas and MRP

    Hi I've created MRP areas, and expect to run MRP by MRP area, however, when I click on the drop down list beside the field MRP area in MD01 I do not get a list to select an individual MRP area.  Is this right?
    Thanks

    Hi,
    we can use Total planning(MD01) for a single plant or use scope of planning to control whether total planning is to be carried out for single plant/sevaral plant/ for one MRP Area/sevaral MRP areas/ combination of plant and MRP Areas.
    Steps :
    1.Group together the plants which are to be planned in spro in --->Define scope of planning.(OM0E)
    2. Define the scope of planning as 999 for ex and give description.
    2. Now select that and Specify the sequence in which Plants and MRP Areas are to be planned,
    3.Goto new entries and enter the plant as 1000/MRP Area as 1000 with counter 1 and plant as 1100 with counter 2 and save.
    4.Execute the total planning either as online job or as background job.
    5.The planning run has to be always started with paralle processing.
    In SPRO in define parallel processing in MRP enter the destination for parallel processing for ex your server name and enter the no .of sessions as 1 and save.
    6.Tcode MD01 enter the scope of planning group and selet the parallel processing and enter. Hope the above points taken care and resolve the issue. Thanking you.

  • When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been.  How do I do this without the document changing?

    When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been.  How do I do this without the document changing?
    I need to be able to send it to a PC in order to print it.

    Hard to say what is happening without examining the file.
    If you like click on my blue name and email me both the .pages file and the the .pdf you have made from it.
    Peter
    ps It would help to say what version of Pages you are using and on what you are running it. iOS or Mac and what version.

  • TS3899 Cannot send email from iPhone. Outgoing settings are correct. Checked against iPad setting which are OK and can send mail OK.

    Cannot send email from iPhone. Outgoing settings are correct. Checked them against iPad settings which are OK and can send mail. What can I do?

    For IOS7.02
    The user name and password are in two places. Make  sure they are correct in both locations.
    Settings>>Mail, Contacts, Calendars>>your email>>
    First spot is here under INCOMING MAIL SERVER
    Below this is OUTGOING MAIL SERVER
    Select: SMTP smtp.comcast.net>> PRIMARY SERVER :smtp.comcast.net>>second location of user name and password
    Here is the second place that the user name and password must be checked.
    I had changed my password in the first spot, but not the second spot. I had been receiving the same error message. This fixed my problem.

  • HT201317 Photos from my iphone and ipad are going into my photo stream on the devices but aren't going into the folder on my windows PC. They used to but they suddenly stopped. Has anyone else had this same problem?. I have checked all settings and they a

    Photos from my iphone and ipad are going into my photo stream on the devices but aren't going into the folder on my windows PC. They used to but they suddenly stopped. Has anyone else had this same problem?. I have checked all settings and they appear OK

    Hi AP_In_Surbiton,
    I am really sorry that you have had so much trouble getting your Caller ID up and going.  I'll be happy to help you out with this and get it working for you.
    Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
    Thx
    Craig
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
    td-p/30">Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • HOW TO DELETE FILES FROM ADOBE READER IF THEY ARE UNNECESSARY

    HOW TO DELETE FILES FROM ADOBE READER IF THEY ARE UNNECESSARY

    Hi,
    You might need to sign up at https://cloud.acrobat.com/ and choose 'Files' tab where you can find all the files.
    Select all the files you want to remove and choose 'Delete' option.
    Regards,
    Anubha

  • TS3367 If I have an IPad mini and my wife has an IPad, can I connect to her IPad with FaceTime from my IPad Mini? Are multiple Apple ID's required? One for each device/person?

    If I have an IPad mini and my wife has an IPad, can I connect to her IPad with FaceTime from my IPad Mini? Are multiple Apple ID's required? One for each device/person?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • I am unable to dial India toll free numbers from my iphone, these numbers are like 1800-***-1515. There is nothing as dial assist in Ios7.1.1 which i can disable and dial in india toll free numbers.Please respond if anyone has any solution

    I am unable to dial India toll free numbers from my iphone, these numbers are like 1800-***-1515. There is nothing as dial assist in Ios7.1.1 which i can disable and dial in india toll free numbers.Please respond if anyone has any solution

    Check this post, the dial assist is part of the iOS 7.1, according to page 49 of the iphone_user_guide
    Make calls to your contacts and favorites while traveling abroad. (GSM) Go to Settings > Phone and turn on Dial Assist. Dial Assist automatically adds the prefix or country code for calls to the U.S.
    This user had a similar problem and solved it by switching off the dial assist feature in Settings/Phone/Dial Assist
    Re: How to save toll free no starts with 1800?

  • I recently migrated my MacBook from 10.5.8 to 10.6.8, using the Snow Leopard CD I purchased from Apple. Since then I have noticed a strange ozone smell coming from the MacBook in the area where the hinges are to open and close the unit. I was told by Appl

    I recently migrated my MacBook from 10.5.8 to 10.6.8, using the Snow Leopard CD I purchased from Apple. Since then I have noticed a strange ozone smell coming from the MacBook in the area where the hinges are to open and close the unit. I was told by Apple that it probably is not serious and is coming from the fans in the MacBook. It is true that the smell/odor is more intense when the fans are working. Apple said I should take the MacBook to an Apple Store to have the hardware checked out. Everything seems to be working correctly. I am backing up automatically wirelessly to a Time Capsule, which I had not done until recently, although I had purchased the Time Capsule in 2009. I have not noticed this odor before. Does anyone suspect something more serious that may be going on?

    You may be smelling it because with the new OS the processor is having to work harder causing it to get hotter then it would with the other OS.  I can't say there is nothing wrong, but what could be happening is just that, it's getting hotter so the fan is spinning faster and moving more air so you are getting more of the smell then you would before.  I would still continue to back it up, and take it to the Apple Store at a Genius Bar and have them look at it to make sure.  Was the computer ever in a smoky environment??

  • I want to Facetime my Ipad from my Iphone but they are both set up with the same Apple id.  Do I need to create a new id for one of them in order to facetime with the other?

    I want to Facetime my Ipad from my Iphone but they are both set up with the same Apple id.  Do I need to create a new id for one of them in order to facetime with the other?

    You should be able to call the iPad using your Apple ID from the iPhone. When calling from iPad use the iPhone's phone number to initiate the call.

  • HT204406 Hello,  I have songs that show they are "Waiting" for download from the cloud but they are greyed out.  Some songs in one album are done others in the same album will not download. It is not a time function because i have been working on this for

    Hello,  I have songs that show they are "Waiting" for download from the cloud but they are greyed out.  Some songs in one album are done others in the same album will not download. It is not a time function because i have been working on this for weeks. I have allowed my compter to run for days and the songs are still not accessible.  I have a Match subscription and Match is working.  If I click on the "Genre" link the greyed out songs show that they are ready for download from the cloud but I cannot download them.  I have downloaded over 1500 other songs, so I am trying to understand what is going on here. I would appreciate any help anyone can give me.
    Thanks

    I did think about that and if I have to I will do that, however there are about 50 songs. I have closed and reopened iTunes several times and I am sure that I have the latest version. It fails right away but I can click on the cloud download icon and download the song that it failed on ... therefore it is not that song "or any one song" causing the issue. Any ideas?

  • Seven of my albums from iPhoto 9.5.1 are no longer visible. The photos are still in iPhoto - is there a way to get the metadata back?

    Seven of my albums from iPhoto 9.5.1 are no longer visible. The photos are still visible in iPhoto, but the albums are completely gone (another 10  albums are still visible). The missing albums are visible in iPhoto Library Manager (I downloaded the free version and when it loaded the library the missing albums were visible)
    About 6 months ago 4 different albums disappeared and I assumed my kids had accidentally deleted them; however, they haven't been allowed to touch the computer since then, so I can't blame them this time! Last time I lost albums I spent hours re-creating them but I am hoping that there is an easier way of getting the metadata to function again - I know I could create a new library with iphoto Library Manager but I would have to buy the full version and can't afford to do that.
    Not sure if it has anything to do with updating the application? (I updated recently and I'm not sure exactly when the albums disappeared.

    Use the rebuild function in iPhoto Library Manager. That does not require a purchase. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

  • How do you remove items from the assets panel that are duplicated?

    How do you remove items from the assets panel that are duplicated?

    If you add an item to a slideshow, you'll usually see 2 entries for that image in the assets panel - one represents the thumbnail, and the other represents the larger 'hero' image.
    It sounds like you may have added the same image to your slideshow twice. You can select one of the hero images or thumbnail images in your slideshow and use the delete key to remove it. Then the extra 2 entries in the assets panel should disappear.

Maybe you are looking for