STO from storgae location to storgae location with in the plant

Is it possible to create stock transport order to move stock from one storage location to other storage loctaion with in the plant? what are configuration settings required?
how to define sending storgae location.
Thank you

hi
In 4.7 version you will not get the Storage location to storage location Stock transfer option.
This is applicable to the ECC version only.
In 4.7 version you can adapt the Transfer posting from Storage loc to Storage loc using the Movement type 311,
but if you need the delivery type, Shipping data for Stock transfer b/w Storage loc to Storage location it is not possible in 4.7 version. It is only avalible in ECC versions.
Stock Transfer Between Storage Locations
u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
u2022 As a result of which user can input issuing storage location with supplying plant.
u2022 Facility of using different delivery types for different issuing storage locations is available.
u2022 Shipping Point data can also be determined based on the issuing storage location.
if u want u can try following in ECC version
STO in Storage loc
http://sapfunctional.com/MM/StockTransfer/Configure.htm
hope it clears
regards
kunal

Similar Messages

  • Hi Friends... I'm trying to delete a back-up file on mu TC but I get the message "The operation could not be completed because the item "bands" is in use. I'd like to start the Back from scratch, could help me out with deleting the current file?

    Hi Friends...
    I’m trying to delete a back-up file on mu TC but I get the message “The operation could not be completed because the item “bands” is in use. I’d like to start the Back from scratch, could help me out with deleting the current file?

    Sorry, I am very confused. I asked the following question....
    Is this the only backup file on your Mac, or do you have other backup files and data on the Time Capsule disk?
    The answer that you gave was....
    This is the only one
    Now you are saying that....
    But I have lots of other files on Time Capsule! The back up file is only one of them.
    Can you clarify, please?

  • TS3899 unable to receive hotmail from iphone 4s. its keep spinning with error the connection to the server failed. Some time it downloads old mails.

    I am unable to receive email from hotmail. It is spinning with checking for email message. Some time it downloads old emails and then those emails disappears and redownloads.  some times shows connection to the server failed.  From laptop there are no issues with account or email. Any ideas?

    Hi Friend,
    Look at this discussion: https://discussions.apple.com/message/20830562?ac_cid=sa123456#20830562
    You probably will think that discussion has not the same problem as you, but probably has your answer there.
    So please have a look and try those solutions.
    Hope it will be helpful

  • How can I remove all my bookmarks from iCloud and start a fresh with only the ones on my iMac

    I accidentally deleted bookmark gilders on my iPad 4 and iCloud removed them from my iMac, iPhone 5, iPhone 4, iPad 2 and MacBook Pro. I turned off Safari on all devices for syncing with iCloud and used Time Machine to restore my Bookmarks.plist on my iMac, but iCloud keeps removing it and replacing the plist with the latest version. I want to remove all the Safari a bookmarks from iCloud, but don't know how to do this, can anyone help.

    Just a note about the difference between these two things:
    * "export" and "import" use an ancient HTML document format that all browsers can understand. When you import bookmarks, Firefox may place them into an Imported Bookmarks folder, or into Unsorted Bookmarks. This does not displace existing bookmarks, and Firefox does not automatically remove duplicates.
    * "backup" and "restore" use a more comprehensive JSON data file, which contains extra information about your bookmarks (such as tags) not contained in the traditional export file. HOWEVER, a restore completely replaces all existing bookmarks, so the restore feature cannot be used to merge in a set of additional bookmarks.
    Related support articles:
    * [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]]
    * [[Import Bookmarks from a HTML file]]
    * [[Restore bookmarks from backup or move them to another computer]]
    Some users find the disk-based Windows Favorites folder a convenient way to organize bookmarks. If you do, too, and you do not need to preserve tags on your bookmarks, you could export each profile's bookmarks to HTML and import them all into IE11. Organize them in the Windows Favorites folder, then export from IE11 to HTML and import that file into each Firefox profile. See: [http://windows.microsoft.com/en-us/internet-explorer/add-view-organize-favorites].

  • Is there any way of moving music from ipod to a new computer with out the old computer?

    i have an older ipod. the computer i set it up on is dead and gone. is there anyway to keep the music on it and put more on it with a new computer?

    See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
    Recovering your iTunes library from your iPod or iOS device
    B-rock

  • Is it possible to import my playlist from a different computer to anouther with out the use of a flashdrive?

    Is it possible to import a music library from one computer to anouter with out a flash drive or eny other forms of music storage?

    Connect both to the same network, transfer entire library from source machine to target by way of a shared folder.
    tt2

  • Storage Location level ATP check with CRM

    Hi:
    I am on an implemenation where the integration is between CRM, EWM and GATP. So, consider the situation where the sales order check is done through CRM and a call to GATP is made.
    Some background on supply
    EWM would like to receive the goods into storage location ROD (Received On Dock) and then do a movement type to move it to storage location AFS (Available For Sale). The sales orders should consider only the supply from storage location AFS and not ROD.
    First question is, is it possible to do a storage location level determination in CRM? I don't think so but wanted to confirm. The reason is because even a plant determination is not possible in CRM when you integrate with GATP (the plant is determined through Rules).
    Now, suppose that we have determined the storage location called AFS (in gATP through enhancement) and will do an ATP only at that level in GATP. Suppose that the first plant that will be checked is Plant A and then based on the location determination procedure, the next plant that will be checked is Plant B. When the system checks supply at Plant B, then the question is this: will it still check only at storage location AFS in Plant B or will it check at the plant level? The requirement will be to check at the same storage location level (which means that whatever process we used to determine the storage location at Plant A has to be followed for Plant B also).
    One option that can be considered is to check at the Storage Location MRP Area level (there seems to be better support for RBA and Storage Location MRP Area than just storage location). See SAP Note 412314. But this is also complicated.
    Another option is to not check at the storage location level but represent the various stocks with stock types (stock type ROD and stock type AFS) and only the stock type AFS will be used in the list of ATP categories.
    Please share any experience that you may have in this.
    Thanks,

    Hi Satish,
    In my project also we had this requirement to determine the correct Storage location after plant has been determined by using rules.
    What we did is as follows:
    - We created a Z table which had entries for all plants and preferred storage locations for those plant (only one entry per plant) in your case it will be like:
    Plant A - AFC
    Plant B - AFC
    Plant C - AFC
    - We used a ATP user exit in APO to get the storage location of source plant ( which was determined in APO via rules) from the Z table.
    I hope this helps.
    Please let me know if you have any questions.
    Thanks,
    Anupam
    Edited by: Anupam Sengar on Dec 20, 2011 12:03 AM

  • My macbook air was stolen from checked baggage. I have the box with all the information. Is there a way to disable this device?  Block it from my Yahoo email? Locate it? Any ideas?

    HI, My Macbook Air was stolen this week from my checked baggage.
    I have the box with all the information SN etc.. Is there a way to disable this device?  Block it from my Yahoo email? Locate it? Any ideas?

    If you activated "Find My Mac" in iCloud before the loss, maybe. Otherwise no.

  • STO for storage location to storage location with delivery charges

    Dear Users,
    Please advice the configuration & pre-requisites for storage to storage location STO with delivery charges within a plant.
    Thanks & Regards,
    Shyam

    Moderator message:
    Please put some efforts into a search
    Storage location to storage location stock transfers have been many times discussed as well as delivery charges in UB stock transfer order.
    Do not just post your requirements and expect others to do your job.
    If you dont know how to search, then please see these blogs:
    A good way to search the forum is with google. See this blog with details for a good search
    Getting the Most out of Google: Optimizing Your Search Queries
    This blog describes how to use the SCN search:
    How to use SCN search
    The discussions are not a replacement for proper training
    Thread locked

  • I want to change screenshot location from my Solid State hard drive with OSX on it, to my 2nd storage hard drive, how do I do this?

    I want to change screenshot location from my Solid State hard drive with OSX on it, to my 2nd storage hard drive, how do I do this?
    I am aware of "defaults write com.apple.screencapture *location*" but I want to change the location to my 2nd drive which doesn't have OSX on it... everytime I've tried to insert MacintoshHD2 in there it just doesn't work... any tips?

    I'm having the same problem.  I've entered the following path in terminal:
    "defaults write.com.apple.screencapture location /Volumes/Macintosh HD 2/[my username]/Downloads"
    But it's not working.  It keeps going to the SSD Downloads folder.
    What am I doing wrong?

  • I just bought a Macbook Air. I also have an external harddrive for which to transfer and save all my existing music from my PC. Will I have any troubles with iTunes recognizing where my music is located if I keep it on the external harddrive?

    I just bought a Macbook Air. I also have an external harddrive for which to transfer and save all my existing music from my PC. Will I have any troubles with iTunes recognizing where my music is located if I keep it on the external harddrive and not save it on the computer's harddrive?

    Just be sure to Follow the steps here to transfer your iTunes to an External Drive...
    Backup iTunes to an External Drive
    http://support.apple.com/kb/HT1751

  • Problem with STO from non-WM to WM-HU

    Hi,
    We have found out recently that we cannot move materials from non-WM to WM-HU storage locations with STO (313-315). When we are trying to post 313 from non-WM storage location, system gives error "ILN basis no. for plant XXXX, stor.locat. XXXX or whse number not found" where XXXX is the plant id and storage location id for non-WM stor.loc., so it should not have any ILN configured.
    We have been using this functionality for a long time, last time in Septmeber. But since the problem applies to all materials and all STOs between non-WM and WM-HU, the problem is not connected to material master or specific storage location but should be some general setting in the system.
    Does anybody has any idea where to look for?
    Best regards,
    Ewa
    Edited by: Ewa Bozejewicz on Nov 13, 2009 2:23 PM

    Hello,
    You probably already solved your problem (hope for you!) anyway it should have to do with SSCC number
    Glossary: International Location Number (ILN)
    Check the customozing under Logistic General - >Handling Unit Management -->External Identification
    Regards
    Claudio

  • I have added a location to an event in calendar the event has synced to my phone with the address but it doesn't give a preview or the option to direct to the location?

    I have spent all morning trying to get locations to add to events on my iMac this now works and has synced with my phone but when I open the event in my phone it has the address but doesn't show a map and doesnt give an option to get directions. I have an interview in a city I've never been to before and will need my phone to direct me from the train station. I know I can just do a search when I arrive but surely there's a way to do it from the calander evernt without having to copy and paste the location from calander to maps?

    Did you follow the instructions on that page exactly ? The instructions work for me e.g. selecting a free app in the App Store app and tapping on 'free', then 'install app' and 'create new apple id' - filling in my details then gave a 'none' option on the payment details :

  • I lost my itunes media folder how can I export the photos from my ipad to another location

    I lost my itunes media folder and also my iPhoto files. I have the majority of the photos from iPhoto library on my iPad. How can I get them from my iPad to another location. Like exporting them to a folder on an external drive.Is this possible. I know I can move photos I've taken with the ipad to a new iphoto, but how can a get the old iphoto photos from my ipad to a new location? I'm basically starting over. Don't ask what happened. It was horrible.

    An external drive? Not sure that there is any way of doing that. There are a number of WiFi transfer apps that should let you transfer the photos back to the Mac itself. Look at some of these.
    https://www.google.com/search?q=wifi%20photo%20transfer%20from%20iPad%20to%20Mac
    This application allows you to transfer all iPad content back to your computer.
    http://www.wideanglesoftware.com/touchcopy/index.php

  • I was in a car collision and need proof of my location when I called 911. The Police Dept., refused to respond, since there were no injuries.   Now, I have a dispute with the other driver who is falsely stating accident happened at another intersection. I

    I was in a car collision and need proof of my location when I called 911. The Police Dept., refused to respond, since there were no injuries.
    Now, I have a dispute with the other driver who is falsely stating accident happened at another intersection. In addition of calling 911 twice, I also took pictures of damages. Unfortunately, I did not take pictures of the intersection signs.
    My AT&T carrier states that this info. can only be disclosed by a subpoena. My insurance carrier states that they will not subpoena this info., since it is a civil case only.
    The Police Department does not keep records of calls they do not attend to.
    How can I get this location  info. from my i phone device if at all possible?
    Thanks,
    Pecosa
    iPhone 4, iOS 6.0.1

    Johnathan Burger,
    I did take photos of the damages to car and license plates, but NOT the intersection signs.
    How do I get the GPS Data in the exit data of photos? Please advise.
    Thanks,
    Message was edited by: Pecosa
    Message was edited by: Pecosa

Maybe you are looking for