STO not picked up in delivery VL10B

Hi,
I have created a Intercompany PO for which the shipping data was created correctly. But when i try to do a delivery using VL10B , the document is not picked up for delivery.
The problem is coming for the new document type which was created few days ago , there is no issue if i use the old document type. I remember somewhere we need to maintain the document type in delivery copy control , but could not recollect where exactly it is.
I checked with all the necessary configs , but could not get a break through. Any help would be highly appreciated.
Regards

J Sudhakar wrote:
> I have created a Intercompany PO for which the shipping data was created correctly. But when i try to do a delivery using VL10B , the document is not picked up for delivery.
Dear,
When you use VL10B and execute and then you tried to create delivery in background which failed.
Now get the LOG of delivery creation you will get the error message post that message (As when ever system fails to create a delivery it generates a Log stating the reason of failure)
To get the Log -> Use Log for delivery creation (Shift +F4) from the VL10B output screen ->Then from here use (Shift +F8) (Notes) to get the log
Edited by: redriver on Feb 8, 2012 4:43 AM

Similar Messages

VL10B does not pick NB Po

Hi
Have a strange issue, VL10B does not pick the PO, cross company purchases
The delivery date is more than 60 dyas, while the delivery creation date is within VL10B std time period of 30 days.
Also do not get anything in VETVG
If I put route, VL10B starts picking the PO. And if I now remove the route and rerun VL10B the PO is still picked??
Any advise is appreciated..

Hello,
Make a variant for the transaction VL10B.
Run the transaction VL10B --> Remove all the entries --> Go to --> Variants --> Save as a variant.
Whenever you want to excute this transaction, call the variant from VL10B --> Go to --> Variants --> Get varints --> Execute.
Prase

Delivery not picked in Wave in T code VL35

Hi Friends,
I have created delivery for 201 Movement (Issue to Cost Centre)and with HODN-Item Category. This is not picked up for Wave in VL35 T Code.
Please let me know if there is any SPRO setting missed out.
Is there any Upgrade related issue. (ECC 6 from ECC 5.0)
Please guide.
Thanks and regards,
Sharabh

I think HOD delivery type is for handling units, which may not be picked using VL35.
Regards,
Aroop

Planed delivery cost- account is not picking in MIRO?

Hi,
Here in pricing procedure even though for the planned delivery costs condition type - account key and account is assigned in obyc & even then the relevant GL is not picking, instead only manual account assigned GL only picked up always kindly let me know the possible causes?
when I create a cost centre based PO with acct assignment category K, the GL which I am assigning in PO only picked up..
kindly let me know the possible causes for the same?
regards,
ARCHU

Hi,
1st one should know where & how account assigned PO will be used.If you used account assigned PO(lts say K), then during GR, you will have account entries
Consumption A/C :Dr
GR/IR Clearing A/C: Cr
During MIRO posting, the GR/IR Clearing A/C as accounting entries:
GR/IR Clearing A/C: Dr
Vendor A/C: Cr
Check the link how GL account for a material group is treated, when a purchase order is created with account assigned with material group and all assignment done in OBYC , OMQW & OME9.
http://www.bluemarlinsys.com/ns/0603-03.asp
Regards,
Biju K

Outbound Delivery - Storage Location not Picking Up.

Hi all..
I am trying to create a Outbound Delivery , but the Storage Location is not picking up at all.
Its blank . ...
Please any one guide me what are all the Master Data checks and config checks i have to look
upon.
Thanks
Balaji

Thanks Charlier & GS .
Issue was solved , i didnt meniton in the Sales document.
Thanks
balaji

Pricing proccedure maintained (8KEZ, AKE5, 0KEK) not picking in STO

Hi Gurus
We are using transfer pricing concept in transfer of trading goods from one plant another plant.
Profit center document is generating but at the actual amount of material master value.
It is not picking the Revenue value that is maintained in AKE5 (plant/material/partner profit center)
Can any one guide me why condition record value is not picking at the time of stock transfer.
Thanks and regards
Sahil

Hi Pradeep
Material Ledger is not activated.
As per your instruction we activated the material ledger in OMX1. But we are getting an errormessage in delivery "Valuation area KLP1 not yet productive with material ledger".
Can you tell me the steps for activating material ledger and its impact.
Thanks and regras
Sahil

For STO with Doc. Type UB, shipping instruction not picking automatically..

Dear All,
For STO with Doc. Type UB, shipping instruction not picking automatically.. Please advise.
Regards

Hi
Please verify in the config the below is populated already....
SPRO -> Material Management --> Purchasing --> Purchase Order --> Set up Stock Transport Order --> define Shipping Data for Plants
Open the Recieving & Shipping plant ID's and maintain their own shipping data and save.
Maintain: Sales Org:
Distr Channel:
Div:
Aside: your shipping plant is already configured with Sh.Point - Tcode: OVL2
Regards
RG

Inventory movement takes away delivery note picked qty.

We have a situation that delivery note is created and picking is saved.
Inventory movement such as MB1A, MB1B, MB1C or Post Goods Issue, the system will only check available inventory and not worry about confirmed and/or committed quantities. And take away picked qty from delivery note. Is this a SAP standard behavier or we are missing some setting?
Thanks,
Dori

Hi,
It is a standard behaviour of the system : some movements must have priority against sales requirement : if you need to scrap the goods, if you need to return the goods to the vendor, if you want to put the goods from unrestricted stock to quality or blocked stock, ..., idem with a change of storage location, ...
If you really want to avoid this, there is some customizing in inventory management :(spro + MM + IM + outbound and transfers + availability checks or somethng like this) : like in SD for sales orders and deliveries, you will be able to decide by movement type and transaction what kind of stock you want to take into account.
But, from what I know, no one excluded sales requirements. But we are in an SD forum
Rgds,
Philippe

Business area is not picking into delivery.URGENT

Hi Guru,
I created order with 3 material one material belongs to different plant. So I created two delivery for one delivery business area is picking and for other business area is not picking in delivery document so I am unable to do PGI it's giving error message that Business area is requred for G/L acct.

hi,
not to confuse yourself. see these steps to determine the business area.
1. define the business area - ( link that with your division.)
IMG=ENTERPRISE STURCTURE = FINANCIAL ACCOUNTING= DEFINE BUSINESS AREA.
2. assign that your salea area. thru the same menu path but in assignment under sales and distribution.
3. maintain the rules by sales area as 2 for your sales area.
after all this, u try it , it will be determine your requirement.
reward points if it is useful.
regards
KR

Not picking the stock for the delivery

Dear friends,
Though the stock is available, it is not getting picked for the delivery.
Can you guide me what are the things I should check to solve the issue.
With regards,
Atul

Hi,
If the picking tab is grayed use T.Code LT03.( IF ware house management is activated).Here fill the ware house number and plant and mention the delivery note number also. Now use The T.Code TCode VL02N here u can see the system automatically picks the required quantity.
If the picking tab is not in gray mode mention the storage location and the plant correctly. Even though the system is not picking the quantity check the Picking location determination with rule MALA.and also check any open orders are crated for the particular material .
regards,
vas.
Message was edited by:
v.s.vas.

ME2L not picking req.tracking number (Delivery Date)

Hello,
We just upgrade our system to ECC-6-EHP7 from ECC6.
In our Previuos system , in ME2L we can see the req.tracking number(Dely Date).
But in the new system , the field is there but the value is not picking.
Do anyone has any ideas...Plz share.
I have attached screenshots for ur reference.

This looks very much like an own development, I would certainly not take this to SAP.
SAP is consistent, if there is a table field identical to a field in the screen then the values are shown 1:1.
there might be more fields in a screen than in the table, those are then computed during runtime.
Your case looks like this "tracking number field" is only used as an output field for some other value.
A programmer should be able to determine at least the program name and then he can check
if there was a modification in your old system e.g. from SE38 via the program versions
or he uses this guide to find the potential exits or BAdIs

STO- How to control Over delivery with batch split?

Dear All,
In STO Scenario, how to control the over delivery?
I created a PO for the Intra Company stock transfer & Delivery created in the Background with the T Code VL10B. When I am doing picking using T code VL02N, the system is allowing to add more than PO Quantity in batches and system displaying the warning message (Specified quantity is greater than the open quantity/Message no. VL287) & allowing to save the deliver document..
Hence plz suggest how to restrict the same.
Hope it is clear.
Thanks & Regards
varun

I am also in the same boat.
I searched the forum and got the link STO - How to control Over delivery ?
I checked OSS notes 548914, 386340,215488 but to no avail.
I suggested user exit USEREXIT_SAVE_DOCUMENT_PREPARE in include MV50AFZ1 to my technical team for finding the resolution. So far it is still on hold.
If you come across any other solution, you can update the forum so that it would be helpful for many others.
Regards,

STO - How to control Over delivery ?

Dear All,
In STO Scenario, how to control the over delivery?
Please note that I have already assigned a tolerance % in my Purchase Value key & same has been assinged to my material.
Now when I create a STO for this material system is picking up this Overtolerance percentage. But Still If I create a delivery more than the PO Qty (which exceeds the tolerance %). System is allowing to save the delivery.
Hence plz suggest how to restrict the same.
Please note that I am selecting the Partially Delivery indicator in STO as A - Create a delivery with qty. greater than zero Since tolerance wont work if I select Partially delivery allowed.
Hope it is clear.
Thanks & Regards,

From OSS note 548914 Over/underdelivry tolerances for GR/GI for stock transp.ord.
R E L E A S E < 4.70
Stock transport orders without SD processing / delivery (for example movement type 351 for the goods issue, Transaction MB1B, MB11):
During the creation of goods issues for stock transport orders the system does NOT include overdelivery tolerances (T156F-FELDM = DM07M-UETMG) maintained in the purchase order item. The system checks only against the quantity ordered during which the system may display message M7022, which can be customized. This is valid for both stock transfers within a company code and for cross-company-code stock transfers.
Stock transport orders with SD processing / delivery (for example movement type 641 for the goods issue, SD Transactions VL02, VL10):
If these are stock transport orders with SD processing, the system neither checksduring the goods receipt nor during the goods issue against the quantity ordered + overdelivery tolerance.
R E L E A S E >= 4.70
As of Release 470 there is, if required, a check against underdelivery tolerances (Field V_T161W-TOLKZ) during the goods issue for the stock transport order. Otherwise the checks are as described for the earlier releases. Customizing: IMG => Materials Management => Purchasing => Purchase Order => ..underdelivery tolerances

Billing Type is not picked up in Intercompany Invoice

Hi,
The scenario is Intercompany STO. Here the flow is Purchase Order-Outbound Delivery- Invoice. No sales order.
I have two billing types, proforma invoice and Intercompany invoice. Both are copy of standard types.
I have maintained copy control for both of the invoices.The flow is working fine. But there is a issue.
The issue is while creating billing, I have to manually pick the billing type.( i.e. ZIV, copy of IV). If I don't select the billing type, I get a error " Billing type ZNLC can not be invoiced with billing type IV" (Here, ZNLC is my delivery type, copy of NLCC).Its not picking the correct billing type(ZIV).
I can't understand where this reference to IV is made. I have deleted the copy control from ZNLC to IV as it is not required.
As per my knowledge, the reference billing document is picked through copy controls and sales document settings. (VOV8)
Even I have checked item category. Is there any other settings?
Could someone suggest what is the cause for this error and how to rectify it?
Thanks and Regards,
Pathanjali Bhat

Hi Bhat,
After ur explanation wat i understand is you did the configuration i.e copy control ZNLC ---> ZIV and also u did with proforma Invoice i.e u did the copy control with 2 types of invoices .
I think so , because of that reason system is not able pick the sutable document type
Delete one copy control which is not required.. and try it.
If it will work let me know..
Reward if it is useful.
regards
Durga Prasad

While creating the Transfer Order system is not picking Sale order stock?

Hi All,
In the B2B process the system is not picking the stock from from sale order stock while creating the transfer order? Please suggest.
Summary : Here we are creating the PR in the sale order and STO is created using the same PR to procure the materials from the WM plant to sale order plant. Since here intialy we are moving the stock to our sale order in WM plant and then picking the same. But while creating the Transfer order system is not picking the sale order stock in WM plant.
Regards.

C S Javali
Check in schedule line in transaction flow whether Transfer Req /assembly is checked or not
Regards
Pradeep

STO not picked up in delivery VL10B

Similar Messages

Maybe you are looking for