STO Partner Copy Control to Outbound Delivery Document (NL)

Hi -
Partner Schema CR for 0003 UB Type has been maintained in configuration, which allows CR (Freight Forwarder) partner function to be manually added to UB Document Types (Partner Determination Process u2013 0003 Stock Transfr PurOrd).
However, even with this configuration the CR partner does not copy to the Outbound Delivery Document.
After some analysis, I found the following:
In program SAPLMEPO (MM06EF0P_PARTNERS) FORM PARTNERS in line 97 u201Ccheck EKKO-BSAKZ equal to spaceu201D; if purchase orders have EKKO-BSAKZ = 'T' then never determine partners. I have checked the EKKO table for field BSAKZ and all STOu2019s have a T in that field. If the code is looking for <blank> in order to apply the partner it looks like the program will not attempt to retrieve the Partner Functions with BSAKZ = T.
All other partners are getting copied to the outbound Delivery, such as PI (Invoicing Party), DP (Delivering Plant), SH (Ship-To)etc.
Is there a way to have Freight Forwarder partner copy control to Outbound Delivery document at time of Delivery create from either Vendor Master or Customer Master for STO (UB Purchase Order type) / Delivery type NL?
Thank you,
Karen

remark: for me the check is in line 113 (SAPKH60407).
Please read OSS note 842829:
2. The system does not transfer the partner data from the STO to the replenishment delivery. This particularly applies to the forwarding agent. The replenishment delivery uses only the customer of the receiving plant (EKPO-WERKS) as a partner. In the replenishment delivery, this customer (EKPV-KUNNR) is the direct goods recipient. The customer is not the sold-to party or a general debtor, for whom the system would determine a (different) goods recipient using the customer master in the replenishment delivery. If the PO header contains a vendor, you can use a modification to transfer the vendor as a partner to the replenishment delivery, if required. However, this is not the standard system behavior. There is no known modification for transferring the forwarding agent.

Similar Messages

Copy control for inbound delivery

Hi All,
I need some help for copy control for inbound delivery. Can any one let me know where is the customization for this?
Is it t.code VTLA.
Path in IMG:Logistics Exectuion-->Shipping>copy control--
>specify copy control for delivery
But I am not sure if the above is the correct customization path.
The reason....
for target document type EL(Inbound delivery) the source document type is DL (order type schduling agreement). Ideally for inbound delivery the source document type should be purchase order. But I can't find the purchase order document types in F4 option.
All documents which are showing are sales order.
Awiting your reply.
Regards,
Sushanta

Specify Copy Control for Deliveries
In this menu option, you define control data for the document flow of deliveries.
You can specify for a particular delivery type, which document type is to be assigned to copied reference documents, and which item categories are to be copied.
You must also make specifications for copying requirements and data transfer, as well as quantity and value updates in document flow. This must be done for each copying procedure at header and item level on a detail screen.
Note
If you define new sales document types, item categories or schedule line categories by copying existing ones, the SAP system automatically copies all specifications for the document flow. You may want to check the copy controls for newly created sales document types, item categories or schedule line categories.
Actions
1. Check the document flow defined in the standard SAP R/3 System.
2. Define to what extent you have to modify its specifications to meet your requirements.
3. Define the document flow for deliveries with reference to sales document types.
Note
Make sure to maintain copy control for the following areas:
Sales documents
Deliveries
Billing documents
If you cannot find an entry, check the copy controls in other chapters.
Complete overview of copy control:
In the chapter on sales, you can find copy controls for:
Sales documment by sales document
Billing document by sales document
In the chapter on deliveries, you can find copy controls for:
Sales document by delivery
In the chapter on billing, you can find copy controls for:
Sales document by billing document
Delivery by billing document
Billing document by billing document

Good receipt with reference to outbound delivery document

Hello Gurus,
Could someone please help with the following scenario?
Article 1234 has base unit of measure pc, altenative measure box, 1 box = 12 PC
In the purchase order (stock transfer order from one site to another site) 4 box of article 1234 is ordered. Outbound delivery created with reference to the above purchase order (stock transfer order) has quantity of 4 boxes (this is copied from PO). And then an transfer order is created with reference to the above outbound delivery and quantity requested is 4 boxes (copied from outbound delivery), but in the transfer order confirmation the confirmed quantity is 14 pcs (this is now confirmed with base unit of measure). And now if we check the outbound delivery doc, the confirm quantity is 14 pcs (1,167 box )
But when creating good receipt with reference to the outbound delivery document, the quantity confirmed is now 14.004 pcs (this is calculated with unit of measure conversion table, i guess). But actually good receipt quantity should be 14 pcs instead of 14,004 Pcs!
What can we do in order to have 14 pc in good receipt?
Thanks in advance for your great help.
Br, Ailleen

Hi,
Thanks a lot for both of your answers. But if is there a way to receive 14 pcs instead of 14.004 pc although the system did the right calculation according to the conversion rules!
But in this case the supplying plant has issued 14 pcs but receiving plant has received 14,004 pcs and now there is discrepancy! Is there some enhancement or user exit could fix the situation or do I have to change the coding in order to solve this problem!
Thanks again for you helpful advice!
Br, Ailleen

Control Over Outbound Delivery/ System based release strategy for Outbound

Hi All,
I am working on one scenario to control the outbound delivery
AS IS : Sales Employee A accepted Order on 6th ,Decu201908 for customer B and order quantity 2 Product ABC to deliver on 15th u2019Decu201908 .
in between Sales Employee B accepted Order on 10th ,Decu201908 for customer C and order quantity 2 Product ABC to deliver on 12th u2019Decu201908.
In this circumstance the Sales Employee B delivering the products to Customer C on 12th u2019Decu201908 ,which the products kept for Customer B. and Sales employee A not able to deliver the goods to Customer B on promised date.
TO BE : How do I control the Sales Employee B should not pick the goods which are reserved by Employee A for customer B.
I would request you to give me the possibilities to control the OBD
Thanks in advance.
Regards,
Padma
Edited by: Padma Priya on Jan 6, 2009 7:50 AM
Edited by: Padma Priya on Jan 6, 2009 7:52 AM

Dear Padma
Go to material master and check what availability check you have maintained. Then go to OVZ9, select that availability check with the combination of "A" and execute. There tick the box Include sales reqmts so that stock will be reserved whoever creates the order first.
In your case, if Sales Employee A creates the sale order first and stock is available, then stock will be reserved for that order only and it cannot be diverted to subsequent orders, unless the first created sale order is deleted.
In this, there is also one constraint. Even if order is not confirmed by customer, some sales people will create a dummy sale order and reserve the stock for them. So in that way, some control should be there in such a way that orders can be created by any sales persons but the deletion option can be given to some higher officials. This basis can very well do.
thanks
G. Lakshmipathi

How to update packing list inform to an outbound delivery document

Hi all Experts,
I meet with an tough requirements, Is there any solution fuction can use to generate packing to a outbound delivery document?
PLease kindly advice, thanks!
Regards,
wei-guo

Hi,
I did a little test and, within the method CHANGE_DELIVERY_ITEM, itu2019s possible to fill the picking quantity (structure CS_LIPSD) but unfortunately during the save the added information is lost.
This is because the BAdI method is fired too soon and the routine PICKMENGE_BEARBEITEN (SAPFV50P) is not called at all.
The problem is quite complex; even after changing the picking quantities, the picking status still remains open!
The picked quantity is generally filled:
u2022     by printing the picking list
u2022     Warehouse Management by creating a transfer order
u2022     or by manual entry
Otherwise, it is assumed that picking has not yet been initiated and the result is that picked quantity is ignored.
In my opinion itu2019s very difficult to solve your problem using only the BAdI implementation.
I suggest you to propose an alternative solution such as the automatic processing of Picking Output EK00; easy to activate and absolutely standard!!!!!!
Regards,
Andrea

Outbound delivery document from Sales order

Hi ,
While creating the outbound delivery document from Sales order, all the line items of the Sales order are populated in the Delivery document. The line items where stock is not available, the line is still populated in the delivery document with zero quantity.
Pls suggest the way in config, so that at the time creation of the delivery document system to populate only the lines with the available stock.
Thnx

Hello Soumya
I could not able to find any std transaction or config via you could restrict it. However you also no till 'Picking' not completed user is not able to make postings... so i couldnt see any issue in this.
Still you need to restrict this, you to configure User Exit via you can restrich the lin items to come in delivery for no stock item.
Amol

One Outbound delivery document per multiple sales orders

hi,
We are trying to acheive to create one outbound delivery document for multiple sales order with some custom logic in user exit (which exit to use).
Is it possible? If so can you please give some inputs?
thanks
Manohar

Chk out the following link for the relebant userexit.
https://wiki.sdn.sap.com/wiki/display/ERPLO/SDUserexits
Regards,
AK

Copy text from outbound delivery to billing document

Hi Gurus,
Is there a way to copy a text from outbound delivery to billing document?
I found text determination. It is only possible to maintain text from Sales to Billing.
Thanks.
Stéphane.

Hi,
Goto the T.Code "VOFA".
Select your billing type.Details.
Goto "Output/partners/texts" tab.
Maintain the "Textdeterm. procedure" as the procedure same as your delivery.
Anotehr way is goto the T.Code "VOTXN".
Here click on "Delivery Header".
Check the check box for "Reference".
Regards,
Krishna.

STO Outbound delivery document not generated

Hi all
I am creating outbound delivery VL10B with reference to PO(STO), when I exicute (F8) after giving PO no. and Source and supplying Plant, the list is emptey. N docs. is getting created.
what should I do to solve this problum?
Help will be appericiated
Pradeep

Dear Pradip
While creating STO itself in ME21N we will be mentioning the supplying plant and receiving plant and receiving storage location
So why do you search for this in VL10B?
In your purchase order if the shipping Tab is coming delivery will automatically created in VL10B provided your PO is saved without any error
Please check your shipping data settings
Hope this information will be useful to you
Sales area 0003, 04, 21 plant is 1002
Sales area 0004, 05, 21 plant is ABCD
If you transport material from 1002 to ABCD plant then 1002 is supplying plant and ABCD is receiving plant
Now this ABCD plant should be made as a customer in XD01 mainly with shipping conditions in that data in sales area 0003, 04, 21 and this internal no has to be noted
In STO the receiving plant is being made as a customer in the supplying plants sales area and the internal customer no has to be assigned
in-img-mm-purchasing-purchase order-set up STO--define shipping data for plants
Now in that img activity that i mentioned above against plant 1002 you have to give sales area as 0003, 04, 21
Against plant ABCD you have mention sales area as 0004, 05, 21 and also this internal customer no in that internal customer tab
Then only STO can happen between these two assuming that all delivery types and other things are configured pakka
Assign delivery type and checking rule
assign document type one step procedure and under delivery tolerance
Regards
Raja

STO Process Copy control settings

Dear Gurus,
I am having issues with item number in purchase order and delivery document. I require the same item numbers in purchase order to be copied to delivery document. I think i got to do something with copy control settings. Please help me. I am confused since its an STO process.
Thanks in advance

Hi George,
Here customization can be done as follows:
Step 1: SPRO --> MM --> Purchasing --> PO --> Set up STO
In this step the customer number and sales area is assigned to Supplying & Delivering plants.
Step 2: SPRO --> Logistics Execution --> Shipping --> Delivery --> Copy control --> Specify Copy control for Deliveries
Check the settings made for DL to NL (STO) and DL to NLCC (Cross company) copy control settings.
Step 3: T.Code OVLK
The Delivery document types NL and NLCC needs to be assigned with "B" in the order required field. Thus, the system understands the data for delivery document has to be copied from Purchase order.
Thanks & Regards,
Sharan

Copy Control from Inbound Delivery to Goods Receipt

Hi Experts,
When we Post Goods Receipt against Inbound Delivery in VL32N transaction, the date (document) in the Inbound Delivery is being copied to the Document Date in the Goods Receipt Document
Ex. Inbound Delivery document date : 10/05/2010. Goods Receipt posted on 15/05/2010. The Document date in Goods Receipt found to be 10/05/2010.
However we want the system to populate the date of Goods Receipt (in this case 15/05/2010) in the document date of GR instead of the Document date in the Inbound Delivery.
Is this can be controlled thru any Configuration? Request you to provide inputs for this kind of copy control.
Thank you,
Best Regards,
Ramakrishna Mangena

Any inputs please...

Outbound Delivery Document Flow (One-Step procedure) Goods Receipt

I am trying to extract the Goods Receipt status of Outbound Deliveries which are posted using One-Step procedure. I can do this one delivery at a time using VL03N.
Some sites (plants) are configured with One-Step procedure and others are configured as Two-Step procedure.
Document flow of an Outbound Delivery is extracted from table VBFA.
For the two-step delivery process (Movement type 641) the Goods Receipt is recorded in table VBFA (Subs.doc.categ. / VBTYP_N = 'i'). Therefore, I can easily extract the goods receipts for these deliveries.
However, for the one-step procedure (Movement type 647) the Goods Receipt does not appear to be recorded in table VBFA. Does anyone know which table the Goods Receipt is stored for one-step procedure?
Using transaction VL03N we can view the document flow. It appears that for One-Step procedure the Goods Receipt is held at item level. By highlighting a delivery line in VL03N and viewing the document flow we can see the goods receipt for One-Step deliveries (therefore, the data must be held somewhere).
I understand that by using One-step procedure the goods receipt is posted automatically, so we can assume that there should never be outstanding Goods Receipts for One-Step sites. However, I have been tasked with the job of reconciling all deliveries for the past 12 months. I need to prove that a goods receipt has been posted for every single delivery.
Any advice is much appreciated.

Thankyou for the advice. I will proceed with your recommendation.
However, the query is inefficient since the link between LIKP and MKPF does not use the primary key (Article Doc. / MBLNR). We have almost 7 million records in MKPF table.
Is there any intermediate tables I can include between LIKP and MKPF so that only primary keys are used for the joins?

Outbound delivery document flow is not updated after LT0G

Hello Gurus,
after executing LT0G Returd to stock from delivery, a document flow of outbound delivery is not updated. Still an OvrllPickStatus remains = C Fully picked and OverallWMStatus = C WM trsf ord confirmd. This though the goods result to be returned correctly from 916 into stock.. What can be the reason for this malfunctioning?
Jari

Many thank for your feedback. The transaction LT0G is executed succefully and a destination storage bin results a correct quantity. Anyway I checked SM13 and a log is empty.
The notes you mentioned seemed very promising, but unfortunately they are not relevant as a release in where I am working is SAP ECC 6.0 SAPKH60013.
I am still trying to find some possible other notes but without a success so far.
Jari

STO AUTOMATIC GOODS ISSUE TO OUTBOUND DELIVERY

Hi,
I'm trying to automate the posting of a GI to a outbound delivery and can't find where in config to make the relevant setting. We are using the two step procedure and have automated the creating of the delivery but still require the GI to be posted.
Thank you for you assistance!!
Regards
Craig

create a variant for VL10B and the n schedule a job for abap RVV50R10C using this variant.
Sorry, that was the wrong info:
Correct way is
create varaint for VL06O and then schedule job for abap WS_MONITOR_OUTB_DEL_GDSI
Edited by: Jürgen L. on Jul 8, 2008 1:29 PM

Outbound delivery document cancelation

Hi,
we have delivery documents for GIs at 3PL plants. After the delivery is created - IDOCs are sent to the 3PLs. After they do the GI, they send the GI-IDOCs to us. But although the GI has been made and 3PL s have sent the GI doc via IDOC - the delivery document is not getting updated. What could be the remedy? We are unable to reverse the delivery by VL09 - as the GI has been by IDOC - system is not allowing us to reverse the delivery doc also.

Hi,
1. Try to find out & resolve the error in your inbound idoc from the plants after GI has been done, using the transaction WE02 & WPER where you will get the Idoc details. After correcting the errors you can re-process the Idocs so that your stock & FI postings will be correct.
2. If this is not possible, you have to Pass a FI JV against the Material & COGS account inorder to reflect the values in your books.
Now inorder to tally your stock you have to post a physical inv document.
Sometimes you may find the 2nd solution as not acceptable to business.
I hope these are the possible solutions to solve your issue.
Thanks & Regards,

STO Partner Copy Control to Outbound Delivery Document (NL)

Similar Messages

Maybe you are looking for