STO PGI happening with out stock checking
Dear All,
My base unit of EA. Order unit CV - Case. Conversion rate is 1 CV = 144 EA.
While I stock in MMBE if found 143.998 EA.
I raised STO for 1CV and created deliery (VL10B) and done PGI (VL02N) for 1 CV, system allowed me to proceed all these activities. When I am doing GR for STO it is throwing the error saying that PL stock in transit exceeded by 0.002 EA.
How to over come this (i.e) during PGI itself system should not allow me to proceed as there are 0.002 EA is in deficit, Pls guide me how to proced now?
Rgds
Srini
Dear Srinivasan
Unfortunately we are not having any such control during PGI , No message settign also available if PGI qty is higher than the STO quantity. Take the help of your abaper if the Badi mentioned below is of any help to you- LE_SHP_GOODSMOVMNT this controls the qty duirng PGI. If not, there are two options. either maintain tolerance level in materialmaster ( purchasing value key) or Cancell th PGI doc in VL09 & re_ do the STO as per available quanitity and Do the Picking and PGI again.
Regards
Similar Messages
-
Delivery created with out stock
Hi folks,
Sales order has been created for 'X' material,but there is 0 stock available for this material "X", ATP has been carried out and has proposed a further date, but when try to create a delivery,delivery documnet has been created even though there is 0 stock ( no stock ) for material 'X'.
How is this possible..................? actually SAP doesn't allow to create a delivery with out stock.............
please suggest.................
points will be rewarded................Hello,
The system will allow you to create a delivery even if there is not stock. But it will not allow you to create post goods issue until the stock available in the storage.
I think there are user exits to prevent system to create the delivery if stock is not available.
Prase -
How to achieve Check point functionality in SSIS with out using check point.
I got question from
interview!!! How
to achieve Check
point functionality in SSIS with out using check point. If package
fails it has to be re-run from the point that it failed instead
of rerunning the entire package.without
using check point.
Please
any one can explain step by step...Sorry you have failed your interview question. Good thing you remembered it, thought about it, and ask a question about it. The solution is actually very straightforward.
Create a table to store the state of your progress. Before each step read the table to find out where left off, then skip each completed step. After each step write to the table which step you have completed. A step can be anything, a task, a component,
a row, an import file, an export file. You don't have to use a table, it could also be a file, just something you can read and write, and does not disappear when your package stops.
If you find this difficult to comprehend, think of a checklist of things you do everyday and work from there. -
Documents created at the time of STO wit and with out SD
Hi all
Can any one help me in this matter
What documents will be created at the time of STO with and with out SD.
Wity Rgds
SekharHi
1) Documents Generated for STO without SD:( STO bet. Plants belongs to same Company Code).
At Issueing Plant, Stock Account is Credited, BSX
At Receiving Plant, Stock account is Debited, BSX (+)..
If you maintain Std. Price for your Material in receiving Plant and if there is any price diff. bet. Material at Issueing plant and Receiving Plant....then the Price Diff. Account ( Transaction event Key- AUM ) will be triggered.
2) Documents Generated for STO with SD:( STO bet. Plants belongs to same Company Code)
Documents will be generated same like above
3)Documents Generated for STO with SD:( STO bet. Plants belongs to Diff. Company Code)
At Supplying Plant:
Stock Account will be Credited , BSX
Cost of Goods sold Acc. will be Debited, GBB - VAY
At Receiving Plant:
Stock Account will be Debited, BSX
GR/IR Clearing Acc. will be Credited, WRX
Reward if useful
Regards
S.Baskaran -
PEAP Happening with out certificate
How could peap authentication be successful with out server certificate on the client i mean its not installed or autoenrolled on the client which is an windows xp with sp2.
I am using ACS appliance which runs 4.0 and has a self-signed certificate in it.
i am believing no one could login to the network with out the certificate in the client either physically installed or auto enrolled but i couls able to login with out certificate.how could this be possible.For PEAP, the certificate is there for the client to validate that it is connecting to the right server; it is not there to support validating the client TO the server.
Verifying the validity of the server prevents / reduces the chance that someone is executing something like a "Man-in-the-Middle" attack.
If you are trying to verify the client to the server (server validates the client), then you need something like EAP-FAST or EAP-TLS ... EAP-TLS wold require a certificate on the client.
Choosing an auth/auth scheme will depend on who/what you are trying to protect, and where you judge the higher risk is most likely to occur.
In this case, the cert required by PEAP is there to protect the client against connecting to a malicious user who is acting as the authentic portal into a networking system (i.e., to steal credentials or information).
Good Luck
Scott -
Dear all
In some circumstances our client is done the customer sales thro JV documents. In this trading process the materail which are procured are still in stock. Now they want COGS account debit, Inventory account credit G/L for this items.
Please tell me how to post the items without doing PGI. It means inventory shouldnot keep with plant.Hi
In MB1A select mvt type 231 and do the transaction which will post consumption with ref to ur sale order.
Reg
Raja -
Issue in V_V2: Can system rescheduling the sales order with out stock
Hello All,
I created sales orders with one material. For that material the stock is zero now. The system has not confirmed the qty in sales orders while creating.
After that as per the client we ran the V_V2 for rescheduling, but system has not rescheduled any schedu lines in any sales orders.
Is it due to lack of stock?
One more point is we do not have Delivery proposal option in sales order. Only One time delivery option.
Is it due to this setting?
Please help me to solve this issue.
Regards
LakshmikanthHi
Because there is checking rule set at order level , thats why once stocks is not there due to unavailabilty of stocks system not allow to go for V_V2.
for this u hav to deactivate under oVZ8/9
thanks
mk -
Function module for se16 with out authority check for se16
Hi ,
I am creating a tode YSE16 which has same functionality as SE16 but having its own authority check. I am calling a function module RS_TABLE_LIST_CREATE function module to get the functionality of SE16. But is there any way that i can get the function module which do not check for the authorization for se16 and execute my tcode.
Regards,
Sri.Hi Sri,
If I am not wrong this is the question?
Guys , Sri is modifying the YSE16 as per this requirement. Do u have some other solution? Thanks.
Requirement is to create customized tcodes YSE16, YSM30 and YSE38 for se16, sm0 and se38. Lets start with YSE16.
Client want YSE16 tcode to restrict users based on some tables within a authorization group or even * value for auth group field.
SE16 restricted on:
S_TABU_DIS
Auth Group and Activity
As per Requirement YSE16 tcode sld be restricted on :
Y_TABU_DI2 (customized object)
Auth Group, Activity and Table name
We dont want to give SE16 to users in Production. So basically requirement is to restrict users on table name with YSE16 irrespective on authorization group. User sld only be able to access the table mentioned in Table name field.
so Srilu is trying to modify the Program. Can you please suggest some other way to modify it.
Thanks.
Regards,
Naveen Dalal -
Need urgent help -update customer account with out stock(Reserve Invoice)
hi
when we creating an invoice ,it will update both customer account and
invetory account. i need only customer account. how can do with this function using oInvoice buisness object and oinvoices lines. i am using
C#
Thanks
Edited by: sap_beginer on May 1, 2008 2:55 PMIts same as I wrote you in other thread, use service type of invoice as
.DocType = SAPbobsCOM.BoDocumentTypes.dDocument_Service
Petr -
Stock transfer with zero stock
Hi all,
Stock tranfer is happening with zero stock.
Is there any way to avoid this ?
Thanks
JeyakanthanHi Jeyakanthan,
If you have already selected 'Block below negative quantity', please check Item Master Data ->Stock Tab: checkbox for
'Manage Stock by Warehouse' is ticked or not.
With it ticked, the system considers the stock in each warehouse and none of the warehouses can go into negative stock for this item.
If this box is not ticked, the system calculates the overall stock availability and e.g. if you do a stock transfer for an item from warehouse A to warehouse B, you will never go into negative stock in an overall view for this particular item although it is negative in warehouse A.
To sum up, you need to check the box "Manage Inventory by Warehouse" in the "Item Master Data" and at the same time "Block below negative quantity" checkbox in the Document Settings in order to block negative quantity by warehouse.
I hope this answers your question.
Regards,
Ivy Zhang
SAP Business One Forums Team -
Action with out validation still showing error messages
Hello, I have a save action on a PopUp thats has the "with out validation" checked but still the error messages are shown... the problem is that y want to validate the fields by myself, not let the framework do it.
The other question I had is, is there a way to show the validation messages from the framework into the popup? because there are showing in the main window.
Thanks.the problem is the acceptable range is wrong or probably wrong. this is resulting in your download speed being lower than the acceptable range and therefore shown in red
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
My user group photo changed with out my authorization
I went to log onto my computer and noticed that the photo of myself which come up on the screen when i type my password in had changed to a picture of an animal. How did this happen with out my authorisation?
Some one may have access to your MBP. I suggest that you change your password.
Ciao. -
PGI using Stock with Special Stock Indicator "E". (STO)
Hi,
We are in the process of creating Stock Transfer.
While doing PGI the System is displaying the following message:
Only 0 EA of material 1103DGC22LB 08062009 available
When we executed T Code MMBE, we found the Stock exits with Special Stock Indicator "E".
Is it possible to do the PGI using Stock with Special Stock Indicator "E"?
Or what would be best possible to handle this situation.
Please guide.
Regards,
PKIf the stock has special stock indicator E. then you can see this in MMBe as Sales Order stock. If you dispaly the details, then you can see the Sales Order number and item for which the stock is assigned. Unless there is some reason that you want to take this stock from the sales order (for example the sales order is to be rejected), then you shouldn't take this stock as you will be unable to fullfill the sales order. If you want ot borrow the stock, then you could do a transfer as advised by previous person from sales order stock to own stock and after you get replacement stock transfer some back to sales order stock, to fullfill the order. If you are using MTO then you could also create a new production order assigned to the sales order to make the stock in the special stock segment.
Rgds
Richard -
How Goods Issu happens in the Stock transfer process with outbound delivery
Hi,
Can you please explain me how the goods issue happens in the Stock transfer scenario with outbound delivery?
can we use VL02n for goods issue for single delivery doc(Delivery type-RL).
Can we use the transaction VL23 for collective processing of goods issue for stock transfers.
ThanksHi Anil,
->You can use VL02N transaction to do PGI for the outbound delivery in the Stock transfer scenario.
-->But you have mentioned that delivery type is RL -is this returns delivery
Normally NL delivery will be used in STO(Rplenishment
delivery)
-->You can use VL06G transaction for collective PGI
The transaction VL23 for delivery schdule in the back ground
I hope it will help you,
Regards,
Murali. -
Opening and closing stock with sales order and with out sales order
hello,
any body please help me my client want to check opening stock and and closing stock in areport.
material contains batch and some material with sales order and some are with out sales order. my client is asking this in a single layout. please tell me isthere any teport or bapi or function module to get this report.
this is very uregent. and layout is requesting like opening stock, production stock, sales stock and closing stock.
please guide me to get this report.
Thanks & Regads
BhaktaTransaction MB5B
For sales order related use specila stock as E and use radio button indicator in stock type
For stock w/o sales order, use special stock indiactor as "space' and stock type valuated stock.
to get a perticular month,opening stock/closing stock enter the start date/end date as month start and end date.
See the o/p which will give the stock as required by you
Maybe you are looking for
-
Error while runing diadem asynchronous script from labview on dual core processor
Urgent need of some help / advice here! Single core runs fine... dual core produces error: Error in <XYaxis.vbs> (line: 17, column: 1): Error while opening object. The object currently open has no subobjects. Forgotten ObjClose? The main software bui
-
Is it possible to convert only select statement into procedure in Oracle
Hi, Just i wanted to convert the below query in to procedure.Procedure input is 'P.Column1' SELECT P.Column1 AS PRODUCT, D.Column2 AS Column2N, D.Column3 AS LongColumn2iption, P.Column4 AS PRODUCICE, D.Column5 AS BilliuctID, E.Column6 As Impaenue, C.
-
Nokia lumia 925 display problem
Hi everyone, I have owned Lumia 925 and having trouble with its display as it gets low in din light. It gets lie even greater than the phone's default low level.
-
Trying to download gov't form from VA. Have Adobe 11.0.07. VA website says this needs update. What is the latest update or problem?
-
OneNote 2013 - Locking Section keyboard shortcut not working
I have OneNote 2013 full PC version. I have a notebook stored somewhere in live.net that has a password protected section. After I unlock the section when I want to lock it using the Keyboard Shortcut (CTRL+ALT+L) it does not work. I have tried eve