STO PO price should flow automatically into STO invoice

Hi
Pls. let me know how to automate flow of STO PO price into STO invoice.
thanks

Hello Shreya,
It is possible to copy the purchase order price PB00 into IV invoice:
> in copy control Delivery > IV Billing
     the field pricing source (PRSQU) must be 'A',
     the field pricing type (KNPRS) should NOT redetermine the price
     (for example 'G').
> both pricing procedures in billing and purchase order must have
the same pricing condition (in standard PB00).
Hope this helps.
Regards,
Raghavendra

Similar Messages

PR price should flow in Contract/sa/po

hi,
i have one requirement that user enter the Price in valuation price in Valuation tab of Purchase requistion .
this price should flow into PO and can't be cahnged.Is there any setting is there
thanks in advance
Rami Reddy

hi,
IN std PR is an internal doc, here in this the valuation price flows from the material master.PO is an external doc, here we are maintaining the price manually or through inforecord.if you dont want the user to change the price then maintain inforecord for the material and vendor combination and achieve it.
we cant achieve this functionality
Regards,
velu

STO delivery date should not be in weekend.

Hi expert,
i just want to make sure the STO delivery date should skip weekend or give a warning message in case it is calcuated based on planned delivery time to be the weekend. Now I know that the calendar in receiving plant configuration can reach this request. but what i concern is, if i change this config, the impact is too big. Does any one have better idea?
also, it looks like that the calendar in unloading point in ship-to master data doesn't work for this.
Thanks!

Dear Srinivas,
Change the check as follows from
Check: BKPF-BUDAT>SYST-DATUM
to
BKPF-BUDAT <= BKPF-CPUDT
add BSEG-KOART = 'K' in prerequisite
Regards,
NCC Talluri

Application should start automatically as soon the user logs into windows.

Hello All,
I have a requirement.
I am developed a time sheet application using web dynpro. This application is configured on the portal & is working fine. Now, I want to make some changes, may be at Portal Content side or Application side, but want this -
As soon as the User loges into the Windows with user id & password, this timesheet application residing on the portal should start automatically and should record the time. Similarly, if the user shuts-down, the application should again record the time. Thus giving the actual time the user worked.
Please reply. Thanks.
Best Regards
Chander Kararia

Hello Satyajit,
Below are the comments on your queries.
1. It would be better if the application starts silently. But, in case, if we choose other way i.e the browser opens automatically and displays the application (expecting the button needs to be clicked by the user) that will also do.
2. In case of system shut-down, I am still to come up with some materialized concept. But, here are few ideas...
a). The application should check if the time entry is available for the current date. If so, should display the text for LogOut only. This will make user understand not to hit it.
b). It should keep on accepting all the sessions (logging & logout) n number of times for the current date.
I would prefer (b) as a better option.
If you have some more conceptual idea, please suggest.
Best Regards
Chander Kararia

How to close STO so that it (data related to STO ) will come into BW

Hi ,
How we close STO so that data will come into BW for reporting purpose.
Regards,
ntt

hi,
You use the delivery completed indicator when there is no further GR is expected but possible...So now when when you wanna close the STO as you don't want any furhter GR, GI for same, then in that case you can use the indicator....
Whenever you do GR for STO later...the delivery completed indicator get auto unticked...
Regards
Priyanka.P
Is your question answered??
Edited by: Priyanka Paltanwale on Jun 2, 2009 9:41 AM

How to update transaction data automatically into MySQL database using PI

Dear All,
With reference to subject matter I want a sincere advice regarding how to update transaction data automatically into MySQL database using PI. Is there any link available where I can get step-by-step process.
Ex: I have a MYSQL database in my organization. Whenever a delivery created in SAP some fields like DO Number, DO quantity, SO/STO number should get updated in MYSQL database automatically.
This scenario is related to updation of transactional data into MYSQL DB and I want your suggestions pertaining to same issue.
Thanks and Regards,
Chandra Sekhar

Hi .
Develop a sceanrio between SAP to Database system,When the data updates in SAP Tables read the data and update it in DATA Base using JDBC adapter,but there will be some delay in updating data in MySQL.
serach in sdn for IDOC-TOJDBC sceannario,many documents available for the same.
Regards,
Raja Sekhar

In Billing Base Price should be in grey mode and in Sales order Change mode

Hi
I have one requirenment the Base price (ZPR0) should pick automatically from condition records and system should allow to change ZPR0 in Sales Order item level , where as it should be Grey mode in billing document item level.
1. In the condition type ZPR0 i had maintainted as NO LIMITATION and in copy controls of VTFL the pricing type as" D"
so system is allowing to change the base price at both Sales order & billing doc level.
my requirement is System should allow to change the price manually in Sales order and at billing document it should be in grey mode, so that no user cannot change the price at billing level.
Regards,
Satya

Dear Kota,
If i maintained as "B" than system will not allow to change in Sales order.
See my req. is System should allow the user to change price in Sales Order and it should not allow the user to change in Billing doc.
Regards,
Satya

In Billing doc Base price should not change where as in SO system allow

Hi
I have one requirenment the Base price (ZPR0) should pick automatically from condition records and system should allow to change ZPR0 in Sales Order item level , where as it should be Grey mode in billing document item level.
1. In the condition type ZPR0 i had maintainted as NO LIMITATION and in copy controls of VTFL the pricing type as" D"
so system is allowing to change the base price at both Sales order & billing doc level.
my requirement is System should allow to change the price manually in Sales order and at billing document it should be in grey mode, so that no user cannot change the price at billing level.
Regards,
Satya

Hi ,
Create transaction varient for vf01 and vf02 in SHD0 and assign it to Users.
Regards,
Suresh

Reg.condition types should come automatically during CR and Billing creatio

Dear Friends
I create new condition types for MRP price and other taxes which is working fine but I have to be entered each time when I create CR and Billing, I want those conditions which is mentioned in the procedure-.control data should come automatically during the the CR and Billing. Please advice me. Previously I got a reply that should create condition record for each condition in VK11,HOW it is possible ?
I didnot assign any access sequence to my conditions which is newly created, so that the above problem could be arrived?
Thanks in advance
Rajakumar.K

Hi,
If there is access sequence then it is possible to bring condition in sales document automatically.
for this Just create on dummy access sequence and assign to condition type
Generate table with combination of only sales organization by V/03
Create access sequence by V/07 and assign this table
Assign this access sequence to condition type
in V/06 under change can be made tab for Manual entries put blank (No limitations)
Maintain condition record for condition type (with price or without price)
Then condition will come automatically
kapil

Multiple deliveries getting combined into one invoice automatically by job

Hello All,
I'm facing issue, multiple deliveries are getting combined in one invoice automatically. The invoices are created by background jobs. It should not combine the multiple deliveries into one invoice ideally as it is being created by background jobs. Could any one please share what might be the cause of it.
Thanks in advance.
Regards,
Sumit

Hi
When you run the dialog or batch billing job the prgram SDBILLDL is triggered.
It simply reads the billing due index (VKDFS) and retrieves all due documents
for processing (internal table V60P_INPUT_VKDFIF)
The program in the standard processes 1000 entries at a time as required
and if each entry processed passes the split criteria (outlined in note 11162)
The system could in theory create one invoice for all 1000 entries picked up.
You see this processing here:
CALL FUNCTION 'SD_COLLECTIVE_RUN_EXECUTE'
LOOP AT V60P_INPUT_VKDFIF WHERE SELKZ NE SPACE.
    ON CHANGE OF V60P_INPUT_VKDFIF-KUNNR OR
                 V60P_INPUT_VKDFIF-VKORG OR
                 V60P_INPUT_VKDFIF-V_FKART.
      IF COUNTER > 0.
        CLEAR SY-CALLD.
        DELETE ADJACENT DUPLICATES FROM XKOMFK.
              PERFORM RV_INVOICE_CREATE                         >>>>>
As you see above, the system tries to bill all entries together
where the customer, sales org and billing type are the same.
It will do this 1000 times before it forces a split.
(you will also notice user exits here which can be used to change this
outcome)
Check note 11162 for the details of what header fields will cause a split.
As outlined previously you could use an item data transfer routine and the field
ZUKRI to force a split on your own terms.
Hope this helps explain the system behaviour
Kind regards
        PERFORM RV_INVOICE_CREATE                                       >>>>>>

What factors should be taken into account for Custom Exceptions

hi,
I just want to know that What factors should be taken into account for making Custom Exceptions.
any examples will appreciated.
regards,
vjoy

Do you want this to be checked exception? If so extend it from Exception or subclass of it. If it is unchecked exception (not forced by javac to be caught by callers), then extend it from RuntimeException or subclass of it. Exceptions are serializable objects and so have serialVersionID field. Also, to allow for exception chaining, define a constructor that accepts "cause" (http://java.sun.com/j2se/1.4.2/docs/guide/lang/chained-exceptions.html)

Considerations should be taken into account when designing an RTF Template

What overall considerations should be taken into account when designing an RTF template?.
For example, how the tables should be set. When the report is running, I don't want to happen to the fields leaving the position defined during design.

Hi,
from my point of view, so general questions are not answered there...
One note,
I'm trying to get the data first, "load it" (for example) into Word and only then generate the tables using the wizards. This will give the effect.
Eldar A.

I was looking at the "Find my iPhone" app and I have a doubt regarding how it works for the macbook. In order to detect the location, the macbook should remain signed into iCloud. What if the thief logs out of iCloud. Would we able to locate the macbook?

I was looking at the "Find my iPhone" app and I have a doubt regarding how it works for the macbook. In order to detect the location, the macbook should remain signed into iCloud. What if the person who has stolen my macbook logs out of iCloud.
It should work fine for iPhone/iPad because we can enable "Restrictions" to prevent the user from signing out of iCloud. Do we have simialr settings for the macbook?
Thanks,

If it's not on the device list, it indicates that someone has gone to Find My iPhone on icloud.com and manually deleted it from the device list (as explained here: http://help.apple.com/icloud/#mmfc0eeddd), and it has not gone back online since (which would cause it to reappear on the device list; Find My iPhone has been turned of in settings on the device; the iClolud account has been deleted from the device; or the entire devices has been erased and restored.
Unfortunately, there's no other way to track the phone other than through Find My iPhone. You could call your carrier and see if they would blackliste it so at least the theif couldn't use it.

Return Free Items should copied into the invoice.

Dear All,
We created a return sales order with two line items.First line item is REN and second line item is RENN item category type.When we created the sales order at that time RENN was not billing relevant.(in VOV7).I have made the delivery and did the PGR. Now the client requirement is they want RENN should copied into the invoice.So now i changed in VOV7 for RENN item category and tried to invoice that open Delivery.But the system is still not copying the return free items into the invoice.
So what changes do i neeed to do in return delivery document or return sales order so that free item should reflect in the invoice.
Regards
Debasish

Hi
Can you check the status of the free return item (Renn)in the delivery and run the below report
RVDELSTA
if the above report is not updating then kindly take the help of Abaper to create a program to update the same ,please find the
program below:
TABLES: VBFA.
data: cnt like sy-tabix.
SELECT SINGLE * from vbfa where VBTYP_N = ' ' and vbelv = ' '.
if sy-subrc = 0.
UPDATE vbfa SET PLMIN = ' ' where vbelv = ' ' and vbtyp_n = ''.
endif.
KIndly check the ossnote 445763
Regards
Damu

USER EXIT/ BADI (The price should not be changed in the billing document)

Hi all,
We have given manual entry provision for pricing in Sales order level. But as per the company requirement, the price should not be changed in the billing document. Also the point to be considered is, it is a delivery based billing.
Kindly help me for finding USER EXIT/ BADI to achieve my requirement.
Thanks.

Hi,
Please refer to OSS notes:
105621 - Authorization check for the condition screen - you can use following user-exit includes for changing the condition tab to display only:
    USEREXIT_FIELD_MODIFICATION
    USEREXIT_PRICING_CHECK
    USEREXIT_FIELD_MODIFIC_LEER
    USEREXIT_FIELD_MODIFIC_KZWI
    USEREXIT_FIELD_MODIFIC_KOPF
1165078 - Authorization check for conditions or subtotals - from ECC6.0 EHP4 there is a dedicated BAdI for authorization check, however if the user is not aurhorized to change the conditions, the conditions are not visible for the user as well.
Regards,
Marcin

STO PO price should flow automatically into STO invoice

Similar Messages

Maybe you are looking for