STO quantity not in ATP CO09

Hello,
I made "Stock transport order" - "UB" and I can't see it in CO09 (Availibility check). I have assigned delivery type to checking rule". Could you tell me what else must be done?
In that moment CO09 runs well after NL delivery is made, but it is to late.
Any suggestions?
Best regards,
/MK..
Edited by: Maciej Kromolicki on Jan 25, 2009 12:16 PM

Hi,
I created a STO and executed CO09 - there was no problem, the STO appeared.
In selection screen of CO09 I used checking rule "01". When you enter the transaction you can choose "
Scope of check" button to see what are the settings behind your availability group & checking rule combination (this can be set in transaction OVZ9 - SPRO > Sales > Basic Functionc > AC and TR > AC > AC with ATP Logic or AP > Carry Out Control for AC).
If I removed the flag from "Incl. purchase orders" checkbox, no PO and STO were diaplyed.
This is just one idea...
Regards,
Csaba

Similar Messages

Quantity not confirmed in the STO

Dear All,
I have an issue in the Stock Transport Order.
While creating STO (UB), Material not getting confirmed.
Material is in Stock at Supplying plant.
I carried out availability check also. It is not yet confirmed.
What may be possibility of error. Any suggestions.
Regards,
Rajesh L

Hi,
STO PO Not confirmed means --> you can't save the PO.
Please explain
SAM

Outbound Quantity should be equal to or less than STO quantity.

Dear Gurus,
My client have problem regarding the quantity in Outbound deliveries.
Suppose in STO quantity is 100, user is making partial Outbound Delivery(OBD) say of 50 quantity today and making OBD of 60 quantity tomorrow . system is allowing to make OBD of more quantity than STO has.
System is not allowing to make Goods receipts of second OBD of 60 quantity by throwing error of quantity exceeds,then user is going to STO again and increasing the quantity in STO equal to shortage.
My problem is how i can stop user so that he can not make OBD more than STO quantity? What setting i have to change in system so that system will give error at OBD creation stage itself.
Thanks in Advance.
parag.

Dear friend
Delivery item categories settings 0VLP will not work in STO because STO is a purchase order not sales order
This is an input that i got from MM forum
Please go thro this as it will useful to you
STO - How to control Over delivery ? Please check OSS note 548914.
I have searched in MM forum and found this thread which is relevant to your requirement
Forum post in ERP - Logistics Materials Management (MM): STO - How to control Over delivery ?
STO - How to control Over delivery ?
From OSS note 548914 Over/underdelivry tolerances for GR/GI for stock transp.ord.
u2022 R E L E A S E < 4.70
Stock transport orders without SD processing / delivery (for example movement type 351 for the goods issue, Transaction MB1B, MB11):
During the creation of goods issues for stock transport orders the system does NOT include overdelivery tolerances (T156F-FELDM = DM07M-UETMG) maintained in the purchase order item. The system checks only against the quantity ordered during which the system may display message M7022, which can be customized. This is valid for both stock transfers within a company code and for cross-company-code stock transfers.
Stock transport orders with SD processing / delivery (for example movement type 641 for the goods issue, SD Transactions VL02, VL10):
If these are stock transport orders with SD processing, the system neither checksduring the goods receipt nor during the goods issue against the quantity ordered + overdelivery tolerance.
u2022 R E L E A S E >= 4.70
As of Release 470 there is, if required, a check against underdelivery tolerances (Field V_T161W-TOLKZ) during the goods issue for the stock transport order. Otherwise the checks are as described for the earlier releases. Customizing: IMG => Materials Management => Purchasing => Purchase Order => ..underdelivery tolerances
My Issue is solved.
Using the BADI LE_SHP_GOODSMOVMNT we were able to control this scenario.
Take the help of the abaper & proceed.
This is not possible thro customization only thro user exit it can be controlled
Dear friend
There is one way to control over delivery in STO
Go to t code OMCQ
Select message M7 - 024 and change from warning to error
Under delivery can be controlled by img-mm-purchasing-purchase order-set up STO----assign delivery type ,one step procedure and under delivery tolerances
Regards
Raja
Edited by: ramanathan raja on Mar 20, 2009 12:14 PM

Delivery is happening more than STO quantity

Hi
I have come across the situation where delievery is happening more than the STO quantity, Delievery type is NL and item category is NLN. I wish to know the reason of this behaviour. Is there any standard solution apart from user exit.

Hi
Through standard configuration it is not possible
It has been discussed many times this issue
Over delivery in STO can be controlled by userexits or BADI only
Delivery item category configuration will not work (0VLP settings will work for only deliveries initiated from sales orders )
Yesterday too this issue was discussed
Enclosing herewith the thread fro your reference
In that MM thread is there which clearly answers you
forum post in ERP - Sales and Distribution (SD) General: Re: Restriction on delivery against STO
Re: Restriction on delivery against STO
Regards
Raja

CATM transaction_System error: quantity not completely distributed

Hello,
When i execute the transcation CATM(entering of time), system was displaying the error in SM12/SM13 as "System error: quantity not completely distributed".
but when i checked the accounts and the cost were transferred. so shall i repeat the transcation CATM again any?
Question: while doing CATM transcation, why the error is displaying??
Please be noted that i referred note 100690.
Service PO is cretaed for 1 PC and service enetry sheet is created.
The goods issue quantity (EKET-WAMNG) at schedule line level deviates from the quantity of goods received actually posted (according to the PO history).
EKBE-quantity - 1PC
EKET-WAMNG- 0 PC
Process: MM and HR module was linked in the business process.
In a Purcahse order , personnel number(HR module) need to maintain for our vendor. then service PO is cretaed and service enetry sheet is careted.
Regards,
Pabbati Obulesu

Hi Pabbati Obulesu
Have you already run the relevant correction report from note 100690? Was there any change to the table entries?
Also check the consistency between the GR postings and the status of the SES.

HOw to restrict a quantity not to be transfered

Hi Gurus,
It is possible to restrict a quantity not to be transfered until its Result recording and UD is not completed. I have a scenario in which PO is generated using Movement type 103, Lot is created, but not cleared( Result recoding/UD not done). Now Store has transfered material using MIGO (Movement type 105) to some location.
Idealy it should not be transfered untill unless its inspection lot is not cleared.

Hi,
You need to carry out the following steps:
1. Remove the authorization of movement type 105 from store person's id.
2. In the customization, go to QM--> QI --> Inspection Lot completion --> define inventory posting, over here, confirm the the entry of movement type 105 for the VMENGE01 and GR blocked stock.
3. So, whenever you carryout the usage decision and stock posting, material will be moved to un-restricted stock from usage decision only.
Thanks
SUMIT GUPTA

How to restrict the delivery quantity not more than target quantity?

Dear Gurus,
How to restrict the delivery quantity not more than target quantity in a scheduling agreement? I think there are 2 methods.
1. I found that setting 0 in Overdelivery Tolerance Limit in Info Record is not effective. Why?
2. I want to set E for the message but can't find the place. The message is generated when entering and saving quantity as delivery quantity that is larger than target quantity. How can I set E to a message (067, as I remember)
Any other effective method? Please advice. Thanks.
Regards,
David

Dear all,
It is not OK after checking everywhere you mentioned. I tested in 2 clients. In the development enviroment client, it works whatever E or W. In test enviroment, it does not work (meassge is W).
I think there must be somewhere besides of those you menetioned.
I notes that SAP help for the overdelivery tollerance setting of scheduling agreement:
Overdelivery Tolerance Limit
Percentage (based on the order quantity) up to which an overdelivery of this item will be accepted.
Dependencies
If you have set the indicator in the Partial delivery/Item field to 'D' (partial delivery allowed), this takes priority. It makes no sense to define a tolerance limit for overdelivery in such case.
Where can I see: 'the indicator in the Partial delivery/Item field to 'D' (partial delivery allowed)'? I want to check it.
Pls help! Thanks.
Regards,
David

Stock Transport Order (STO)will not create delivery

I have created a intercompany Stock Transport Order (STO) and it has created the shipping tab in the Purchase order(PO), and all seems to be correct.
I have material in the plant, yet when I go to create the delivery using VL10G, the PO does not show as a choice. I also do not get an error, so I cannot tell why it is not creating the delivery.
Is there a way to see an anaylis of why the STO is not showing as a choice?
Thanks,

Hi,
Please check the delivery date in the STO created.and adjust the del creation date etc input fields at VL10G and try the posting.If there exists no error in the po created.

G/L balance sheet in STO is not balance

Dear All,
in t-code fs10n my g/l acc is not balance in STO (Internal plant with same company code) the balance is occure my procedure is
1-creating stock transport order
2-creating delivery & post goods issue
3-creating billing document
4-creating excise invoice . here two document is created one
AED ,BED ,ECESS is credited & cenvat suspense is debited & 2nd
cenvat suspense is credited ,.stock transfer is credited & customer is debited
5-goods received wrt excise invoice . here one acc document is created
AED ,BED ,ECESS is debited & cenvat clearing is credited
Actually in billing cenvat suspense is debit &credit but in migo cenvat clearing is credited so it shows in my g/l balance sheet in sto im not doing miri to balance cenvat clearing debited so how can i balance my g/l balance
Can we capture excise invoice in migo .
how can we balance those sto have done
pls give ur valuable suggection.
Regards
Amin

Hi,
I guess this account is a reconciliatons account, and so, you have clear you customer before to equal balances.
rgds

Error while TO creation LT10 - Putaway quantity not zero

Hi All,
I am trying to create a Transfer order via LT10 (or via LQ02) where the available stock is available. The error log that I see says - "Putaway quantity not zero", Message no. L1605.
The stock Scenarion is like below:
Total stock                   15
Avail.stock                   15
Stock for put.                40
Pick quantity                  0
What I understand for any stock transfer to happen there should be Available Stock. Now I want to use this 15 qty for further processing by using transaction LT10 or may be LQ02. Why does standard SAP not allow this?
If I do the stock transfer via LT01 for above scenario it does allow us to use the available stock.
The error is coming from below code of program RLS10034
*........Quants mit einzulagernden Mengen nicht markierbar!............
if itab-einme ne 0.
    itab-ikone = sym_locked.
    itab-msgid = 'L1'.
    itab-msgno = '605'.
    itab-msgty = 'E'.
endif.
Pls advice why the check is there in place when it could have been avoided and how to remove this check?
Thanks,
Ravi Sabhachandani

yes you are right there is a check and with standard SAP that is not possible you need to look for alternate method.Never came across this type of scenario in past however my suggestion is to have a look on the below function module and user exit that might be helpful
L_TO_CREATE_POSTING_CHANGE
MWMTOAU3 for posting change notices
Even if you are able to mange this with some custom code I see a operation issue there
LQ02 is help to the change the stock from one stock type to another (or quant characteristic) as per your test data if I will transfer the 15 pc from unrestricted to Quality and later on the transfer order of 40 get's confirmed (which is having the unrested stock) in the same bin (this depend on the configuration of mixing) how the worker will come to know which is quality reject or which is unrested by looking physically
Total stock                   15
Avail.stock                   15
Stock for put.                40
Pick quantity                  0

Fixed quantity not supported for alternative items

Hi dears,
I was trying to configure in a Bill of Material a group of components marked together as "Alternative item", having the Fixed quantity indicator set (so the quantity is not in proportioned with the order quantity).
However, when I do this action I have the error message no. 29485 "Fixed quantity not supported for alternative items", because a fixed quantity is not allowed for alternative items.
Leaving out the fact that I don't understand for which kind of logic this should be done, do you know if there is any solution to achive the same result (use alternative item and each of them should be with fixed quantity despite th eorder quantity)?
Thanks and regards,
Giovanni

Daily structure relationship step: remove relation
CLOSING

ATP CO09 reporting in BW

Hello everyone,
Is there anywhere to get ATP (CO09) information from R/3 to BW? What is the best method?
Thanks,
C~

Hi,
Please find the follwoing for webreporting.
Wad 7.0 links
Presentation: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6dd54713-0c01-0010-8691-a3576b9a95d9
Pdf: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cedbc9bb-0601-0010-1a8f-b9684aaf0204
http://help.sap.com/saphelp_nw2004s/helpdata/en/83/54973910a9bc12e10000000a114084/frameset.htm
help.sap.com
http://help.sap.com/saphelp_nw04s/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/47/d4fed1c60a9743ade3b4cf306d5d48/frameset.htm
Creating Web Applications with the BEx Web Application Designer
http://help.sap.com/saphelp_nw04s/helpdata/en/44/b26a3b74a4fc31e10000000a114084/frameset.htm
pdf files
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6f969190-0201-0010-2c9b-89b55c42c4d4
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b085e86e-2353-2910-0c96-9f6ab693d0e6
E class on WAD
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/8783eb70-0701-0010-7dab-8531d45da926?prtmode=navigate

LQ02 (RLLQ0200) Putaway quantity not zero

Scenario:
o Two KANBAN control cycles (WM Replenishment Strategy) for a material
o u201CCombine posting changesu201D-set in the customizing (Stor. Location Control in Warehouse Mgmt)
o Stock determination active / IM-311 mvtype used for WM-KANBAN-replenishement
o Both KANBAN control cycles set to u201Cemptyu201D such that two transfer orders (dest stor. type 150 KANBAN) created
o One of the transfer order is confirmed
o Available material on stock is K consignment (special stock type)
Problem
It is not possible to execute the WM903/IM411K-posting via LQ02 if there are two transfer orders and only one of the transfer order is confirmed.
Error message u201CPutaway quantity not zerou201D (status icon locked within LQ02)
The system allows the WM903/IM411K-posting via LQ02 only after both transfer orders are confirmed.
LQ01 is able to execute the posting change (related to the confirmed KANBAN TO) with IM-311-K mvtype. But I don`t want to have consignment stock in the IM-destination storage location therefore the WM903/IM411-K-posting needs to be done before the 311-IM-posting.
Thank you in advance!

yes you are right there is a check and with standard SAP that is not possible you need to look for alternate method.Never came across this type of scenario in past however my suggestion is to have a look on the below function module and user exit that might be helpful
L_TO_CREATE_POSTING_CHANGE
MWMTOAU3 for posting change notices
Even if you are able to mange this with some custom code I see a operation issue there
LQ02 is help to the change the stock from one stock type to another (or quant characteristic) as per your test data if I will transfer the 15 pc from unrestricted to Quality and later on the transfer order of 40 get's confirmed (which is having the unrested stock) in the same bin (this depend on the configuration of mixing) how the worker will come to know which is quality reject or which is unrested by looking physically
Total stock                   15
Avail.stock                   15
Stock for put.                40
Pick quantity                  0

Total confirmation quantity not equal to planned confirmation quantity

HI
In co11. if i entered more than operation quantity
its showing warning message
Total confirmation quantity not equal to planned confirmation quantity
Message no. RU117
how can i change into error msg???
thanks in advance

Dear,
Go to OPJB then select
00000000 RU 117 Total confirmation quantity not equal to planned confirmation quantity E- Error.
It will work for you.
Regards,
R.Brahmankar

Negative quantity not allowed for Put Away Planned

Dear Experts,
I'm trying to activate the PDI document but the system show the error message: Negative quantity not allowed for Put Away Planned.
I was looking the document flow from the item 10 and I saw there is one task was created with quantity "1 box" and the same document was cancelled but the quantity "2 box" was cancelled. I believe because of this is happening the error.
All items from my HU is with the same problem, duplicate the quantity during canceling.
Somebody can give me advice how fix it.
I found a SAPNote but Note 1674037:Negative Put Away Planned quantity (PWP) due to "Store HUs" but I need a workaround to fix my actual PDI and finish the process.
Regards,
Alan Mattos

Hi Petr,
I checked the transaction SMQ2 and I dont have anything stuck there. Then I tried to change de deliveryquantity but the field quantity isn't available to change. My PDI document already been the Goods Receipt Status "Completed". I try to reverse this document and the system show the message: Delivery is locked (Posting Not Possible). I believe its happening because the PDI isn't active.
Do you have other idea ???
Thank you a lot for your help.

STO quantity not in ATP CO09

Similar Messages

Maybe you are looking for