STO - Storage Location to Storage Location

Hi
Is there facility in 4.6C version to set up storage locaion
to storage location transfer STO ?
B'Coz iam not able to found Customizing setting in SPRO.
RRS.

Hi,
In 4.6 C version you will not get the Storage location to storage location Stock transfer option.
This is applicable to the ECC version only.
In 4.6C version you can adapt the Transfer posting from Storage loc to Storage loc using the Movement type 311,
but if you need the delivery type, Shipping data for Stock transfer b/w Storage loc to Storage location it is not possible in 4.6 C version. It is only avalibla in ECC versions.
rgds
Chidanand

Similar Messages

STO for storage location to storage location with delivery charges

Dear Users,
Please advice the configuration & pre-requisites for storage to storage location STO with delivery charges within a plant.
Thanks & Regards,
Shyam

Moderator message:
Please put some efforts into a search
Storage location to storage location stock transfers have been many times discussed as well as delivery charges in UB stock transfer order.
Do not just post your requirements and expect others to do your job.
If you dont know how to search, then please see these blogs:
A good way to search the forum is with google. See this blog with details for a good search
Getting the Most out of Google: Optimizing Your Search Queries
This blog describes how to use the SCN search:
How to use SCN search
The discussions are not a replacement for proper training
Thread locked

Storage location to storage location

Hi all,
I am doing STO from storage location to storage location in MIGO. While doing so is it possible to get excise tab in migo. If there any settings for that please let me know..
Regards
Mahesh

Hi
Excise will be levied only if the material moves from a plant to another plant or a depot.
If u try to move a material from a storage location to another within a plant then there will not be any excise involvement.
Check with ur finance guys .
Also if u r trying to move ur material to a storage location outside ur plant, then the same has to created as a plant or a depot and then STO has to be done.
Basically for India excise comes to paly a role when the material leaves the premises only.
Check and revert .
Thx
Raja

How Do I Move Local OneDrive Storage Folder to Another Location?

Howdy,
I've just installed the new 9926 build and wanted to sync my OneDrive data. I am using native VHD boot and so OneDrive setup wizard automatically chose the local
%USERPROFILE%\OneDrive folder as a local storage for the data obtained from OneDrive.
However, I don't want the data to be stored on my VHD drive. The OneDrive wizard didn't provide any Back button to change settings for the local storage location, so I had to use the location I've chosen.
Now how do I move the OneDrive folder to another location? Previously you could right-click OneDrive folder, chose Properties and change the location on the Location tab. Now there isn't such a tab.
Is it a step back in usability for OneDrive feature?
How do I move local OneDrive cache folder to another location?
Thank you.
Well this is the world we live in And these are the hands we're given...

I've found out that you have to unlink OneDrive from your PC and repeat configuration steps to change the location of OneDrive folder on your PC, just like you did so in pre-Windows 8.1 builds.
Is it a new behavior and MSFT wants to get rid of Location feature in newer Windows 10 builds, or it is just a temporary issue because some parts of Windows 10 TP code are based on pre-Windows 8.1 codebase?
Thank you.
See also
Move the OneDrive Folder
Well this is the world we live in And these are the hands we're given...

Transfer material from Storage location to Storage type.

Hello,
At the time of usage decision we are posting the stock in "To Reserve stock" for that we have created seperate storage location ie for Sample material.
we having two samples one is customer sample and other is in house sample both the samples we are posting in same storage location.
Client want to differentiate these two samples, so we have created two storage types.
Now My question is " can we transfer the samples in different storage types from Storage location.
This is the QM and WM integration.
Please advice
Thanks in advance.
Regards
Anil

Hello Anil
I don't think you can transfer from storage location to storage type.
If your purpose is to differentiate these two samples, then why not use different Sample types with different number ranges and thus identify them. You don't have to get into QM-WM integration just for that.
If you want you may also set up 2 different physical sample locations: That would be ideal.
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Types
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Number Range
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Locations
On the application side you may use the sample management procedures to deal with samples. See the following link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/b8/b9b3341a933f50e10000009b38f83b/frameset.htm
Does that work? Let me know.

Transfer between storage location to storage location within same plant

Dear Gurus,
We r doing storage location to storage location transfer within same plant through purchase order.
Due to excise requirement we have to raise excise invoice for the same for captive consumption purpose.
Is it possible to make it One step procedure so that GR will take place at same time as GI the way it works for plant to planrt.
In ECC 6.0 option is there for transfer between storage location. I configured but it is not working.
Please check the same.
Rgds,
Saurabh

Hi Saurabh,
The proceedure you are following is a bit wierd. But I think this is as per your business requirements.
You can continue to follow the same proceedure as this may not be possible through one step movement type.
Best Regards,
Prateksha.

Approval for storage location to storage location or plant to plant movemen

Hi all,
Our client's requirement is when goods transfer from the storage location to storage location with movement type 311 or plant to plant with movement type 301, untill & unless the authorised person at the receiving end approves it, the movement should not be happened?
How to map this? Any release strategy?
Thanks in advance.
SmanS

You can map the process in SAP using 2 step stock transfers.
Storage location 1 313 movement type - it will be in transit until you do receiving in the receiving storage location 2 using movement type 315
Similarly for plant to plant movement type 301 and 305.
There is no customization available in SAP to do this with the single step stock transfers that you are currently using.
Thanks and Regards,
Maheshwari

APO Consolidation location for Storage Location MRP Area

We are using Storage Location MRP Area .
Our Scenario is like ->
1 Plant -> n MRP AREA -> n Storage Locations
We are using consolidation location determination rule .
But actually we observed SO requirement is appearing at plant level in APO instead of MRP level although stock confirmation is done is MRP Storage location level only .
Things are working fine if we dont use consolidation location rule . We also observed that confirmation sub-item in SO doesnt show confirmed Sub-location for consolidation location . Transportation lanes are also maintained but requirement should pass to MRP location which is actually not happening .
Please help , thanks .

HI Srinivas ,
ya GATP check is configured at sublocation level only .
While in case of consolidation location only comfirmed orders are appearing at Plant level .
Also Stock transport requisitions are not getting transfered which is also a pain .

ONE storage location onther storage location during that period have to be

Selection criteria: date
When the date is given all the material that have been moved to the ONE storage location onther storage location during that period have to be listed.

Hi G K,
     U can use MB51 tcode, its std. tcode., in this, fill the following fields like this, u will get desired result.
field name             value
movement type       311.
posting date            as u wish( from to date).
Reward points if useful..
Regards,
s.senthil kumar.

Split storage locations into bin locations

Hi,
Is it possible to split storage locations into bin locations without using warehouse management?
Regards,
Shiyam

Hi,
You can set up as many storage locations as you need and so COULD have one storage location for each BIN (there is only a one-to-one relationship and so you can't use multiple bins in the same location without WM).
But if you have lots of BINS then you should really be using WM.
Steve B

Material Transfer from Storage Location 2 Storage loc

Hi Gurus,
Here Client want to transfer Material from 1 loc to another. Std T Code is MB1B with Mov Type 309. But here we have to enter material, qty,& batch no.But client's requirement is that he dont want to enter all these things.He want to select the material,batches collectively sothat seperate entry should be minimised. Is there any functionality through which we can transfer the selected materials?
Please reply soon its urgent.
Regards,
Mayur

Hi mayur
First of all 309 movement is ussed for Material to material transfer
like our friend said for storage loc to storage loc. you need to use 311
Now when you go to MB1B then goto Edit in that you can see default value
enter your default value , so after that you need to choose only material and batch
collectively
Thanks
Bala

STO from storgae location to storgae location with in the plant

Is it possible to create stock transport order to move stock from one storage location to other storage loctaion with in the plant? what are configuration settings required?
how to define sending storgae location.
Thank you

hi
In 4.7 version you will not get the Storage location to storage location Stock transfer option.
This is applicable to the ECC version only.
In 4.7 version you can adapt the Transfer posting from Storage loc to Storage loc using the Movement type 311,
but if you need the delivery type, Shipping data for Stock transfer b/w Storage loc to Storage location it is not possible in 4.7 version. It is only avalible in ECC versions.
Stock Transfer Between Storage Locations
u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
u2022 As a result of which user can input issuing storage location with supplying plant.
u2022 Facility of using different delivery types for different issuing storage locations is available.
u2022 Shipping Point data can also be determined based on the issuing storage location.
if u want u can try following in ECC version
STO in Storage loc
http://sapfunctional.com/MM/StockTransfer/Configure.htm
hope it clears
regards
kunal

Storage loc to Storage loc transfer thru STO

I have seen something for storage location to storage location transfer through STO in IMG but not getting how to use that.Anybody have any idea about this how to use or work?
Thanks in advance..

Hi neetu,
The tag for activate STO for storage locaton to storage location in MM is for using a Storage location as the supplier ,as of in standard SAP we use Plant as supplier for STO's not storage location's directly in the vendor field at the time of STO.
its already mentioned in notes you can check that also. and main thing this is not active in Standard system as it may cause some undefined problems in systems.
Better go ahead with the Standard process.
Regards,
Ninad Kshirsagar

STO DN with specified GI location

hi expert
we are using Stock Transport Order with Delivery and Billing Document in AFS, when we do VL10F/VL10B, we want to specify a storage location as default GI location in DN. OVL2/OVL3 had been done, now storage location is OK for Item level in DN, but it is wrong for SKU level.
for example:
i had "assign picking locations" to location 1, material A has inventory in location 2, but no inventory in location 1. when VL10F/VL10B, storage location in item level is location 1, but storage location in SKU level is location 2. how to do revise this in AFS?
thanks.

Hi Colin,
The default storage location in delivery is set the same way no matter if it is delivery for STO or any other outbound delivery. The location is controlled by the shipping point and the storage condition field on the "Storage" view in the material master.
The link is set up in IMG for Logistics Execution --> Shipping --> Picking --> Determine Picking Location --> Assign Picking Locations.
BR
Raf

With in Plant - Storage loc to Storage loc STO in ECC 6.0?

In case of raw materials, we have to bring from outside godowns to inside plant storage location. As per business requirement we are treating the outside godowns as storage location of the same plant.
In this scenario with in Plant, storage location to storage location stock transfer we need to include the delivery cost(freight)
also we need to monitor the stock in transit while goods movement from storage location to storage location since godown located few kilometers away from plant.
In ECC 6.0 by creating Stock transport order can we achieve this. Through Customizing settings shall we achieve?.(Without Split valuation functionality solution is required)
Please help to solve this.
Viju.

We solved this issue ourself.
this scenario can be addressable through SD shipment dellivery route
1. add sales view in the material master. fill all required fields
2. do customization settings in stock transport order under material management purchasing
3. create order, supplying plant and receiving plant identical, mention storage location for receiving plant optional.
4. create replenishment delivery(picking), background create outbound delivery, post goods issue in the outbound delivery document by puting picking qty & storage location in the respective fields.
5. you can view the accounting document generated in the out bound delivery via. Stock show under an order stock. frieght also captured in seperate account.
6. make good receipt referring outbound delivery document.
7. stock updates.
8. process end.
V.Vijay.

STO - Storage Location to Storage Location

Similar Messages

Maybe you are looking for