STO - Unpack HU assigned to an outbound delivery

Hi SAP experts,
I'm trying to unpack a HU assigned to an outbound delivery created for a STO.
The material packed is WM managed.
I would like to know what are the steps to perform ?
- I've created and confirmed a TO from 916 to 923 with LT09 transaction
- What are the nexte steps ?
I've read what's mentioned in this link Repacking Unpacking of Handling unit material but I don't succeed with HU02 ? How am I suppose to use it to unpack ?
Regards,
Bahia
Edited by: Bahia M. on Jul 26, 2011 10:31 AM

Hi,
In VL02N, go to Edit--->pack.
Select the HU and "delete assignement" and save the delivery.
Unpacking is done.
Later put the HU back in the original storage bin by creating the TO in LT09
please let me know if this is not what you are looking for
regards

Similar Messages

STO Problem while doing GR against outbound delivery

Hi Gurus,
Need your help regarding STO,in my case i created
1. STO
2. Delivery in VL10B t code and did PGI
3. on the basis of Delivery i created billing document
4. Excise invoice in J1IIn
Now while doing GR against outbound delivery system in not doing GR giving some error code 1 as follows
Goods receipt not possible for delivery 4900000212: error code 1
Message no. M7865
Diagnosis
The goods receipt for the delivery cannot be posted.
The error according to the error code:
1. The delivery does not exist.
2. The delivery type is unknown.
3. The delivery is not goods issue posted.
4. There are no delivery items.
5. The receiving plant could not be determined.
6. The delivery items have already been goods receipt posted or contain zero quantities.
7. Goods receipt(effect)movement type to goods issue movement type could not be determined.
8. It is not currently possible to block the delivery.
Procedure
Error code 1      : Check your entry.
Error code 2,3,4,6: Check the delivery and its document flow.
Error code 5      : The delivery must be related to a purchase order or
                    the customer must be a retail business.
Error code 7      : Check the settins for your movement types.
My delivery types shipping points everthing is in place but am not able to trace out whats the problem. Please help its urgent
Regards
Vivek

Hi
Based on the error code 1 , it says that the delivery does not exists in the system, That means you cannot perform a Goods receipt againsst the document specified
I have also not done Goods receipt with reference to Outbound delivery. So i am not able to confirm that this can be done or not.... i will definitely get back to you on this.
Thanks & Regards
Kishore

Unpacking HU assigned to Delivery with RF (LM25)

Dear,
I am experiencing problems once I try to unpack picked Materials (Transfer Order is confirmed) from a Handling Unit assigned to an Outbound Delivery by means of RF.
What I actually want to do is repack (1. unpack Materials from picked HU, 2. pack Materials into new HU with other Packaging Material).
Note that Handling Unit Management is active and Goods Issue is not yet posted for the Outbound Delivery of course.
In VL02N I can easily do this from the Packing screen (select picked HU, Empty, enter Packaging Material/create new HU, select new HU + Material, Pack).
Now when I try to unpack with LM25 (I saw on this forum this is the transaction for Unpack HU by Delivery), by entering the HU concerned, the system tells me:
Wrong object ID
for HU 1000001010
What am I doing wrong here and how can I make it work?
Thanks a lot in advance for any clues!
Kind regards,
Bart

Hi
I'm not sure if this is all related to your issues, but it might be useful info. We got an external specialist to assist with my issue and he showed me how to unpack using LM61. As some of the posts suggest, you cannot use e.g. LM25 or LM22 directly as those screens first require important input from LM61. RF Steps to Unpack:
a.) LM61->Scan Delivery and F4 Nxt
b.) F2 More
c.) F11 Unpack
d.) Scan HU
e.) F4 ByMt (Unpack Materials from HU)
f.) Scan Material in first input enabled field
g.) Type Quantity (to unpack) in second input enabled field and ENTER
(Notice that there are 2 entries for the same material/qty - the one has the checkbox selected and the other doesn't. See it like a positive and a negative)
h.) Now if you save, you'll get a success message that 'Handling unit was unpacked'
The other issue I had was to Unpack a HU child from HU parent. It is very similar to the above. The only difference is that you must scan the child HU to unpack in the last screen and enter/save. I think the idea from SAP is so as you take the HU out of the Parent HU, you scan it, enter and save after you're done unpacking. But just one important note. We have an important requirement that you cannot unpack a Loaded HU or even if the Parent HU is loaded. SAP allows this unpacking with LM61 and we had to build in those validations. Also another nice-to-know is that you can set a breakpoint at SE37 WS_DELIVERY_UPDATE_2 if you'd like to see how SAP unloads using this function.
Best regards,
Adrian Bruwer

HU assignment to Outbound Delivery

Hi Experts,
I am facing a problem with the assignment of HU to Outbound Deliveries.
I'm working with WM module.
When my HU get to my shipping area (standard 916 with dynamic storage bin), it is assigned to the Outbound Delivery.
In my process, I delete the assignment to the outbound delivery in order to pack the belonging HUs (box) into another HU (palet).
Then this palet is put in another Storage Type until we want to post the Goods Issue.
The problem is that I cannot assign back the HU to the Outbound Delivery.
The systems tells me that I need to do another TO for this Outbound Delivery.
The Outbound Delivery does modify the picking quantity nor the picking status when we delete assignment, and I cannot create another TO.
Does anyone has an idea on how I could manage to reassign the HU to the Outbound Delivery.
Thanks in advance,
Best Regards.
Remi

Hello,
I did what you described me in your answer but my problem is still the same.
When HU is in Storage Type 923 and Storage Bin PACK.BIN, when I try to do the HU02 transaction, the system tells me that it is impossible to repack, because my HU is already assigned to an Outbound Delivery.
Message HUFUNCTIONS 191.
If you have another idea or if I am missing something please tell me !
Thanks very for your help.
Regards,
Remi

HU - handling unit is currently part of an outbound delivery

Hello Experts,
i need to create an HU assigned to an outbound delivery.
I tried with function L_TO_PICKHU_ASSIGN, this function create the HU not assigned therefore VEKP-VBOBJ = 12.
What i need is an HU with VEKP-VPOBJ = 01 - The handling unit is currently part of an outbound delivery .
Do you know how can i fix this problem??
Thanks in advance
Boris Besana

Boris,
Did you do LH01 and assign a pick-HU to the pick-TO for the outbound delivery (unless auto pickHU assignment is configed in IMG)?
Usually when you confirm the pick TO the pick HU assigned to the TO get assigned to the Outbound Delivery which references the TO, resulting in VEKP-VPOBJ = 01.
If PGI hasn't done, have you tried returning the stock via LT0G (Return Transfer for OD) to return the stock/HU?
Mewan

Route determination in Outbound delivery

Hi Friends,
After STO is done i made an Outbound delivery for that STO. Is it possible to determine the route for the outbound delivery?
What is the significance of Route and Route Schedule in Transport Tab of Outbound delivery?
Please some one explain the route determination in Logistics execution master data and also what are all things i should define for route determination for outbound delivery?
Thanks in advance...I'm ready to provide more info on this.
Regards,
Arasu

hi
You can define routes in Logistics execution > Transportation. There are two ways to determine route in STO. One is manually enter route in STO and 2ndly is automatic determination. Automatic is recommended when there are big shipments. Automatic route determination is based on Shipping point, shipping conditions, ship to party. I recommend you to use manual entery route in STO. You can also calculate freight and shipping costs by using transportation in logistics execution.
Check the following links. You will find helpful material in these links. I am also configuring transportation in SD module. Transportation is done for both STO and Sales order.
Re: Work Flow & Procedure For Transportation Module Of SD
http://help.sap.com/bp_wholesalev1600/Wholesale_US/HTML/Scenarios/G82_Scen_EN_US.htm
update forum accordingly

Outbound delivery allows only the unrestricted stock for particular material and plant

Hi,
In STO I have an problem the outbound delivery creations allows all stocks under unrestricted, Quality inspection, Block stock.
I want the outbound delivery creation of a particular material and plant it allows only the stock under the unrestricted only. It doesn't allows the stocks under the Quality inspection and Block stocks.
I need to know how to configure this or how to solve my requirements.
Regards,
Ramesh N

Dear Mohammed ,
as per your scenario , there is two movement type has to trigger in the Delivery level according to the plant and material combination .
as per my knowledge it will not configurable in standard process . this will possible with user exit logic only .
follow the below logic to achieve your issue .
you have to create two item categories and two schedule lines with (655 &653) , that means your movement type has to trigger at sales order level only . write a logic in the user exit - MV45AFZZ -USEREXIT_MOVE_FIELD_TO_VBAP , if this combination matches then automatically item category has to over write other wise it will copy the existing item category .at delivery level you can see two movement types in item level.
wait for other experts solution , if any standard is possible or not .
Regards,
C.B Reddy.

Outbound delivery in ATP

Hi All,
There is an intercompany STO between two plants. I created an outbound delivery against the STO using VL10g. The delivery date in STO is different from that in outbound delivery. When I check the availability using CO09, the system shows the delivery date in STO and the outbound delivery quantity as the stock in transit qty. Is there any setting/config which will show the delivery date on the outbound delivery in the availability overview?
Thanks in advance,
KSB

Any suggestions..?

STO Outbound delivery document not generated

Hi all
I am creating outbound delivery VL10B with reference to PO(STO), when I exicute (F8) after giving PO no. and Source and supplying Plant, the list is emptey. N docs. is getting created.
what should I do to solve this problum?
Help will be appericiated
Pradeep

Dear Pradip
While creating STO itself in ME21N we will be mentioning the supplying plant and receiving plant and receiving storage location
So why do you search for this in VL10B?
In your purchase order if the shipping Tab is coming delivery will automatically created in VL10B provided your PO is saved without any error
Please check your shipping data settings
Hope this information will be useful to you
Sales area 0003, 04, 21 plant is 1002
Sales area 0004, 05, 21 plant is ABCD
If you transport material from 1002 to ABCD plant then 1002 is supplying plant and ABCD is receiving plant
Now this ABCD plant should be made as a customer in XD01 mainly with shipping conditions in that data in sales area 0003, 04, 21 and this internal no has to be noted
In STO the receiving plant is being made as a customer in the supplying plants sales area and the internal customer no has to be assigned
in-img-mm-purchasing-purchase order-set up STO--define shipping data for plants
Now in that img activity that i mentioned above against plant 1002 you have to give sales area as 0003, 04, 21
Against plant ABCD you have mention sales area as 0004, 05, 21 and also this internal customer no in that internal customer tab
Then only STO can happen between these two assuming that all delivery types and other things are configured pakka
Assign delivery type and checking rule
assign document type one step procedure and under delivery tolerance
Regards
Raja

Issue During Outbound Delivery for STO Purchase order

Hi,
Delivery Quantity is not picking automatically in VL10B, while creating outbound delivery with STO purchase order with account assignment ''Q'' Project (with WBS element). Stock also available in the supplying plant as shown the below screen shot.
MMBE:
Please do the needful.
Thanks,
Ashok

Hi Pardhu,
Thanks for your response.
We don't have any open reservations and safety stock available for the material. Kindly go through below screen shot for your reference:
Thanks,
Ashok

Unable to create outbound delivery for STO??

Hi All,
I am trying to create an outbound delivery for a cross company code stock transport order, but when I try to do so in Txn VL10B the system does not create any.
What I have observed is that in the STO I do not get any delivery creation date in the shipping tab. the system is not determining delivery creation date.
Does anyone have any idea why it is so? Why the system is not able to determine the dleivery creation date? I have tried by creating STOs for many materials, but none works!
Regards,
V S

Hi
Pl check the settings:
Below is the sto check list:
Check all your settings once again for creating inter-company billing:
- Material should exist in both plants.
- Stock will be maintained in D-Plant (Delivering).
- Now Plant - R (Receiving) become the customer of Plant-D. So create a dummy customer in Plant-D's company code and sales area.
- Assign this customer number to Plant -R's details & its selling sales area.
- Maintain the intercomapny billing type (IV) in ur sales doc type (OR).
- Assign the Plant-D to selling sales org+ dbt channel.
- Maintain relevant copy controls between documents.
by doing all this then create po and check wheather do u got the shipping tab in the purchase order, if yes then replenishment del will be created.
With Regards
baalakrushnan.da

STO - outbound delivery partially do PGI in warehouse

Based on the STO, we are creating outbound delivery, most of the outbound delivery has nearly more than 200 line items, out of 200, nearly 120 line items TO created and confirmed, now the user wants to save PGI for only confirmed 120 line item, but system wouldn't allow us to confirm partial PGI, for these user have to delete the remaining 80 items then only system allow to do the PGI.
Is there any possibilities to save the outbound delivery partially, then for the next time when we open the same outbound delivery remaining unconfirmed line item have to show, and it allow us to save the remaining items.
Thanks in advance
regards
Shivani

Hi,
Error message VL609 is designed to prevent PGI before picking was
complete. If not, posting cannot be carried out unless you
change delivery quantity. Partial postings are not possible!
Function 'copy picked quantity as delivery quantity' could be used.
To sum up, It is not be possible to goods issue a delivery that is not
fully picked and for that reason error message VL 609 is issued.

Unpacking and empty a HU in outbound delivery

Hello,
I'm new with HU. In my company we want to evaluate the HU. So, we want to use the same HU since the process of production until process for sale to track every box. We are using the same # HU in the inbound and outboud deliveries in all process.
I have a problem when I try to empty and unpacking HU in a outbound delivery. I'm getting the following error: HUDIALOG107 "Within the delivery, posting change not possible for stocks".
When I pack the delivery for sale, I'm used the number of HU that previously was used for others deliveries: outbound delivery (NL) and inbound delivery (HID) with reference to a stock transport order (UB) to receive the product in the plant for sale.
How I could unpacking this HU??
And is correct to use the same #HU in all deliveries of different process??
Please, help me!!
Thanks & Regards
Sandra

What if I want to add something in the "Free Good Delivery Control"? Say Z....
If I press F4, the following values are coming as Search Help - _, A, B, C, E. E is the one which I want to modify....as it is making proportionate to the scheme.
Say if I maintain 10:1 exclusive scheme with Whole Unit..... then if I enter 20 in order 2 appears as Free. Now in Delivery if I change it to 19, the free goods becomes 1.900. But I want to make it 1. If the user changes it to 9, then it should be 0, i.e the line item should not exist...or if it is difficult I will give a error message that "Delete the free line item and then make changes"...
Any idea .... I will then sit with the ABAPer and make the necessary changes...

Delete assignment of HU from outbound delivery (VL02N) not working

Hi All
I have searched many threads to find the solution to be above problem but none of them was working for me, so posting the query again.
I hava a dummy pick HU that I create for some purpose, finally i want to delete the assignment of the HU in the outbound delivery.(not to delete the HU completely). For me, the assignment of the HU vanishes from outbound delivery with 3 FM's. 'HU_GET_HUS' , 'V51P_DELETE_RELATIONSHIP' and 'HU_POST'.
The problem is, when i PGI the delivery, the HU appears again in VL03N. I am not able to understand this strange behavior.
I have tried all FM's like bapi_hu_delete etc, but they delete teh HU completely which is not my req. I heard abt this FM BAPI_HU_DELETE_FROM_DEL, but am workng in Ecc 5.0 and the FM doesnt exist.
Pls help
Thanks

Hemanth,
I recall that we used to update the HU status as well when we dissociated HU from delivery, though can't remember the reason now.
Pls check the VEKP-STATUS for HU after you have done with these 3 FM calls, I believe you have to update the status to 'BLANK' with the help of some FM, try it first if it works for you by direct updating it in table in Dev.
BR,
Diwakar

Goods Receipt w.r.t Outbound Delivery with HU-STO

Hi All,
We are doing STO Process with Handling Unit.
When doing GR w.r.t outbound delivery, we select Via.Hand.Units and execute then we enter into it and select the HU and click and copy.Then item OK and Save.
Upto here its fine.
When i save the GR,it is giving the Inbound Delivery no. I want to know how this inbound delivery is generating in background when i save the GR.
Kindly help me.
With Regards
Azeez.Mohd

Hi Attila,
Appreciate yor reply.
The problem is that for one of my client it is generating the inbound delivery when we do GR w.r.t outbound delivery via HU.
But when iam trying do the same scenario for other client it is not generating.
I have maintained same config w.r.t that client even though i am unable to get the inbound delivery for GR w.r.t outbound delivery via HU.
What might be the problem? where i need to check?
Kindly help me.
with regards
Azeez.Mohd

STO - Unpack HU assigned to an outbound delivery

Similar Messages

Maybe you are looking for