STO with SD Route

Dear MM Experts
              We are using Stock transfer From one plant to another plant with in company code with Excise billing.
        My scenario is plant A will raise the STO to Plant B . based on this plant B will do the delivery and Excise billing and all.
now plant A will receive the material they will do the Goods receipt in MIGO against outbound delivery at the time the excise value should inventrosed with material. is it possible..
Plant B billing Details
    Basic price Rs.10000
    Excise     Rs     800
   Se.cess.   Rs       50
   H.Sec cess Rs     20
As of now plant A getting the plant B's moving average price at teh time of goods receipt only Rs.10000
i want at the time of goods receipt in plant A the entire amount 10870 should added to material coast.
Please help..
Waiting for Valuable input.
Regards
P.Anandhakumar
Edited by: Anandhakumar Palanisamy on Mar 28, 2009 6:25 AM

You have to ensure in your organizational processes that there is no switch between Transactions MB0A/MIGO and VL32/VL32N. please read the note 199703.

Similar Messages

Goods Receipt in STO with delivery ( SD Route ) problem

Hi,
there is issue related to Goods Receipt in STO with delivery ( SD Route)
here
1. PO with delivery is created ( SD rote )
2. with reference to above STO outboud delivery & PGI is done
but after this Goods Receipt is done but outbound delivery document is not updated.
Note : as per my understanding here user has done Goods Receipt against STO PO instead of Outbound delivery.
so please guide me so in the future user can not do Goods Receipt against STP PO in the case of STO with delivery cycle. only user can do Goods Receipt against outbound delivery.
Thanks
h shah

You have to ensure in your organizational processes that there is no switch between Transactions MB0A/MIGO and VL32/VL32N. please read the note 199703.

Need Help with Linksys router broadband-b

I have a Linksys wireless-B broadband router for some reason it just went crazy on me. My wireless card is a wireless - G . Now when i had Verizon DSL i got this router and a USB wireless adaptor from verizon. I had the usb adaptor on my wife computer and the router and modem on my notebook for six months we had there dsl service until we moved to a nother city. Once we had all of our service's transfered to the new home we could not get verizon DSL there.
So for a nother six months we had to use dial up and being that we run a home business dial up was just not up to the task. Well we got rid of dish network just to get cable T.V. just to get the cable broadband service. That's when i got a wireless card for my notebook anyway for six months the network was working just fine with the router and my wireless card.
Until Sept this year just a few weeks ago the router started going crazy. Before my note book was config for windows to connect linksys was connecting and i would see all conection in the site survey, and my own network also. Until a few weeks a go my network would not show .
So i call linksys the have me download some up dated firmware that would not install on my notebook or my wife computer after being on the phone for hours with linksys they come to tell me that the router is ok and working alright after all the test and steps they took me through with the router. Linksys tells me that there is something wrong with my PCM slot on my notebook or either my linksys wireless card. Ok First of all i can pick up signal on other networks and go on line like the Hilton Hotel when i go in there parking lot, Second i can pick up othr networks and get on line that are not secured sometimes so this tells me that there is Nothing wrong with my PCMI slot or the wireless card.
Now i took my router across the street to a friend house and guess what he gets a signal off the router with his notebook but i can not and when we plug the router in the AC outlet the internet light was flashing like crazy and my wireless card was not even in my notebook so that tells me that someone close was pulling signal off my router but i cant.
Can someone please explain this to me i want to get another router wireless - G this time but if there is something that can be done to get this one working like it should that would really help.
The Notebook has been checked out and config and that works well when i hook the either net plug in from the modem the router was config as well but i just can't get a connected to the router when i use the wireless card.

Yes press and hold the reset button in back for 30 seconds and release. Wait 10 seconds and power cycle the router. Now connect to 192.168.1.1 username blank, password 'admin'. Now try.

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

Plant to Plant STO with excise invoice and taxes in one company code

Hi,
I have a new business requirement, we want to create only one company code and 12 plants in different states, each plant will have separate purchasing and sales activity this is ok this can be done with separate excise and series group as ther will not be any issue for purchsing and saling of materisl with exice in each plant , but how we can transfer the material plant to plant if the plant is in different states we want that the material should be transfer from palnt to plant with excise invoice only, as we have the company code common, how to create the billing document for this, and how to pass the duty from the saling plant and capture the same in the recieving plant. with proper tax entry. Can we do the STO with biiling if the two plants are in single compnay code.
regards,
zafar

hi,
I am trying to create a Stock Transport Order (STO) with document type UB and item category U. My objective is to transfer material from Plant (supplying plant) 100 to Plant (receiving plant) 1100 within one company code (1000) with STO.
For this purpose I created a raw material 1434 in plant 1000 with sales org 1 view and in that view entered in delivering plant field 1000 as delivery plant. After that I extended material 1434 to plant 1100 without changing anything what I did while creating the material first in Plant 1000 except in organizational level I entered 1100 in the plant field. I entered Sales org 1000 and distribution channel 10 in organization level for both plant while creating and extending the material. In me21n I chose Stock Transport Order with document type UB and item category as U also receiving Plant as 1100. With this when I tried to save the STO the message, I am getting an error, Cannot determine shipping data for the material 1434?
I am doing solely mm function why I need to create Customer master? In this case plant 1100 is the customer right?
Solution:
1. Mat.(1434) should be maintained in both the plants. (1000&1100).
2. Should have enough stock in supplying plant(1000).
3. Make its supplying plant as a vendor in vendor master record in receiving plant(1100).
4. Make it receiving plant as a customer in customization.
    Create customer (xd01) & and define the shipping data for plants in both the plants.
    Path: spro u2013 img u2013 m.mgmt u2013 purchasing u2013 po u2013 set up STO u2013 define shipping data (1 by1 )
    In Receiving plant (1100)                         In Supplying plant (1000)
    Customer num. 123345 (for ex.)              Customer num. -
(don't fill)
    Sales org.yyy
    Dist. Channel
    Sales div. y
5. Assign doc. Type is "NL" for intra company STO. If STO is inter company, Assign doc. Type is "NLCC".
    Position doc type is "UB"
    Enter supplying plant(1000) & doc type (NL) & checking rule (ex:01)
6. Assign doc. Type is "UB" to u'r plants.(PO)
    Go for new entries
    Enter supplying plant(1000) & Receiving plant (1100) & doc type (UB).
7. Create a PO, choose the doc type is `UB' & item cat.'U', Enter supplying plant as a vendor in PO of the receiving plant(1100).
8. Provide this num (PO) to SD people, they will do the delivery by using transactional code is VL10B.
9. Sales people they will provide "out bound delivery num".
10. Do the GR. In GR the second tab 05 out bound delivery instead of PO mov.type 101.
11. See the stock over view in the receiving & supplying plants.
thanking you

For STO with billing how to take material in plant stock without cancelling excise duty

Hi,
Please suggest for STO with billing how to take material back in plant stock without cancelling excise duty.
Scenario is
Material transffered from manufacturing plant to depot,material is in transit now, but due to some reason material calls back to manufacturing plant.
Since the excise invoice is raised and material move out of factory client can not cancel excise invoice from legal point of view & client has to pay excise duty for the material movement.
Please suggest how to take back goods to manufacturing plant without cancelling excise invoice.
We have suggested client as there is no provision to take back goods to manufacturing plant without cancelling excise invoice
and to take back material to manufacturing plant stock they have to cancel excise invoice and other related documents.
But client is asking for another options.So requesting you to please suggest any alternative ways for same.
Thanks,
Amit

client can not cancel excise invoice from legal point of view & client has to pay excise duty for the material movement
I don't think, there is a statutory rule which says, manufacturer should not cancel the excise invoice generated on their Depot plant. Justification can very well be given to Excise authorities and hence, ask your client to follow the normal process by treating this as Depot returns.
G. Lakshmipathi

I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network. Does anyone know where to find this? It's a password that I set myself, not the one that came with my router.

I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network. Does anyone know where to find this? It's a password that I set myself, not the one that came with my router.

It's in your Keychain on the computer you usually use to connect to your network - the "kind" will be "AirPort Network Password".
Your Keychain can be opened by using the Keychain Access program. It is in your Utilities Folder.
Open Keychain Access, and type airport in the search field. You will see a number of entries. Choose the one with the name of your wireless network, open it, and check the box next to "show password". Before it reveals itself you will be asked for your login password - the one you use to log in to your MacBook.
The network password will appear in the box.
Quit Keychain Access.

Connection to R/3 with SAP Router

Hello,
I want a connecton from XI 3.0 to R/3 with SAP Router.
But if i want to import the RFCs i become no connection.
I Edit Software Component Version, but there is it not possible to set any Sap Router String.
For Connection Data you can only set System, Client, Message Server and
Group.
I have also test to write the Router String before the Message Server IP without any sucess. Not enough Place to write the holfe Path in the Field.
I become no connection to the R/3 to import the RFCs.
Regards,
Robin

pls check correct port number..
basis will give u this information. or u use tcode SCOT.

Not able to connect with my router, but other networks work ok.

I have a 2d generation iPod Touch. I can't connect to my home network that operates on a DLink DIR-628 router. However I can connect to other access points with no trouble at all. When my iPod tries to connect with my router, it asks for my password and I enter the password I think is correct, but it won't accept it. When I check the router web page there is no password visible. Does the problem lie with the Router or with the iPod Touch? I have three other computers and two wireless printers that are operating through the router with no problem at all.

Have you tried:
- Resetting your iPod:
- Resetting network settings on the iPod: Setting>General>reset>Reet Network Settins
- Powering off and then back on your router
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. Help.

My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. I don't want to lose anything. I have tried turning everything off and back on again. Desktop and laptop are working fine. Sometimes it turns on suddenly and I can use it for like 20 mins but then shuts off again. Same thing is happening with my dad's iphone, Help.

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Am considering buying a Time Capsule. But all specs I read about it (re: printing) is how to hook up a printer via USB connection. Need to confirm...that a wireless printer will work with the router feature of the Time Capsule. I assume yes...?

Am considering buying a Time Capsule. But all specs I read about it (re: printing) is how to hook up a printer via USB connection. Need to confirm...that a wireless printer will work with the router feature of the Time Capsule. I assume yes...?

A wireless printer connects to the network just like your computer, or iPhone/iPad, etc. connects using wireless.
The printer must be set up intially to scan to "find" available wireless networks, then your specific wireless network needs to be selected. Then the password for the network needs to be entered.
Once the printer is configured to join the network, it is always connected to the network. No further configuration is required.

Can't get Xbox Media Connect to work with WRT54GX4 router

My Xbox 360 and 2 computers all run through my WRT54GX4 router. They all use wired connections.
I can't get Media Connect to work so I can stream pics and videos through my Xbox.
I have the correct ports set up and enabled per Xbox instructions. but still no joy. When I go to the Media tab and select pictures, it will list my computer but when I try to select it, it fails to connect.
Note that when I go to Library, media sharing on my PC it does list the Xbox there and I have "allow" selected.
Is there a problem with this router and Media Connect? I am running the latest firmware.
Thank you,
- Chris

Thanks DT for the reply!
As noted, my Xbox actually is connected wired, not wirelessly.
I have all the ports open, but I am unclear on whether the IP address I enter into my router here should be for the *host PC* (in my case IP *.101) or for the Xbox (*.103). The Xbox instructions aren't crystal clear here... they just say the ports must be open for your computer.
I've tried it both ways and neither works, but would like to know which is correct so I can give it another go.
Thanks,
-Chris
P.S. - I've also gone through MS tech support (phone) to no avail.

Delivery Qty Zero for STO with 2 line item

Hi Guys,
I have a problem when create delivery for STO with 2 line item which contain material with BOM. I have create delivery with tcode VL10G refer to Purchase Order and Delivery successfully created, but delivery qty was zero or empty. I try to fill the dlv qty same with STO Qty but popup message "Only 0 PC for the material available", I have check the stock and there is a stock exist for the material.
I need help for this problem.
Regards
Gunawan

Hi,
Please check if inbound delivery is already created for that Qty
Thanks
Diwakar

STO with reference to Purchase requisition

Dear SAP gurus,
Can I create a STO with reference to purchase requisition from Sales order.
Below is the scenario:
In Export sales, we have created dock location as plant. First a sales order to be created with third party item to generate purchase requisition.
Now with reference to purchase requisistion, I want to create a STO.
Can this be possible....
regards,
PP

Hi,
Did something similar on a 4.0a system years ago, maybe this will help.
My notes say:
PO create, stock transfer order
enter order type (ours was customized version - probably so that the copy rules from PR - PO were set correctly)
Create with reference to P.Req.
on the pop-up box remove the 'U' (think that was the key bit)
continue
select item, copy +details
Save, STO created
Regards,

GR for a STO with SD delivery and Batches with split valuation X

Hello,
We have a problem with the Goods Receipts for Stock Transfer Orders between plants for materials subject to batch split and split valuation with valuation type X.
The scenario is very similar to the one explained on this thread: STO:problem with batch valuated material
When creating the the STO, it automatically sets a valuation type that is not be the appropriate one, we cannot use only one valuation type per position because we can use more than one batch (and valuation type). The outbound delivery has the correct valuation types for each batch and material but when doing the GR at the receiving plant, it only takes into account the valuation type indicated in the STO with no chance to change it.
I have seen the Note 212532 but we are not working with active ingredients.
Does anybody know a useful EP to use?
Thanks in advance for your help.
Regards,
Javier.

Well, we can change the valuation type before Posting the goods issue of the delivery, but in most cases we need more than one batch (each batch has a different valuation type) for each item (material) in the purchase order.
We can do this at delivery level but the GR only takes into account the valuation type of the purchase order.
Thanks.

STO with SD Route

Similar Messages

Maybe you are looking for