Stock and Values in Alternative Unit of Measure

Dear Experts,
Can anybody suggest me any Standard Report for Stock and Value in Alternative Unit of Measure.
Regards,
vgl
Edited by: vglokam on Aug 16, 2010 8:56 AM

Hi,
you cannot take stock report with alternate UoM. Alternate UoM is for "ORDERING" purpose only and not for SKU.
Arul

Similar Messages

Alternative units of measure are inconsistent; correct the values in SMW01

Hi,
when material replication process is happening we came across an error in SMW01.It shows
Alternative units of measure are inconsistent; correct the values
Message no. COM_PRODUCT_UNIT014
Consider the below example
we have maintained a material from KG to MM which is not a standard SAP conversion but client requires this conversion as
Tubes (Steel) are mainly ordered in M (Meters) but invoiced by the supplier in KG. Then used in production in KG again. In that case we need a conversion M <-> KG.
This is very common practice even in indirect material (e.g. Oil, you order barrels, tu vendor invoices KG and you handle Liters in your stock
can anyone guide me if there is any BADI or SAP note available for this error.
regards
subbu

Hi,
I have gone through that note it says that the corrections has to be done at BBPCRM component level but i have gone through the system component version i did not find CRM
so how can we apply the note?
regards
subbu

Stock in alternative unit of measure

Hi experts,
I have problem regarding tools stock, I want to see stock of such material in alternative unit of measure in transaction MB52. Is there any settings for such option in MB52?
Regards,
Rakesh

you can see the stock in alternative unit in MMBE, for one material only.
SAP cannot expect that all materials listed with Mb52 are having same base unit and same alternative unit, only in this case it would make some sense, for all other cases it would just make trouble. So it is not provided.

RWBE and changing Alternative Units of Measure

Hi
I'm trying to use RWBE to view the stock holding of multiple materials. I want to change the base unit from Ea's to TON's for all the materials in the list however it seems that I can only do this one at a time for each material in the list. If I change the list display to the "Tree Structure" I get an ABAP dump when attempting to convert all the items at the same time.
Can this be done using RWBE or is there an alternative report which can be used.
Thanks in advance
FYI- MMBE is not an option since I need to view materials u201Cen massu201D

Hi,
To Check the available unit of measures or to create below gfiven the Path
SPRO->General Settings->Check Uuits of Measurements
Please check whether Alternative Unit of measure is maintaind.
Regards
Reward Points if useful

SPRO path for maintaining basic and alternative unit of measure.

HI ,
Please tell me path in SPRO where we maintain basic and alternative unit of measure. If it is not in SPRO ,please suggect where to create new or delete old unit of measure.
Waiting for your reply.
Thanks
Rohit

Setting up new units can be done in transaction CUNI
If you want change units in a certain material, then do it in MM02, click button alternative data, then goto the units tab

Creation of Inspection lot in Alternative Unit of measure

Dear Guru,
Our implementation is going on in a Tube manufacturing company where Base Unit is maintain in KG & 100 % visual inspection is taken place & we accept or reject tube on Pieces. So how can we do this in SAP, Because in SAP Inspection Lot is created on Base Unit & UD (Stock Movement) also in base unit, How can we in corporate Alternative Unit of measure.

Hi,
      1. give unit of conversion in MM basic data (Unit of measurement) say 1 kg = 10 pieces
       2. add unit of issue as a Pieces in MM QM view
        3. add in inspection paln Unit of measure as Pieces ( if possible )
Now during stock posting post the stock KG and now see in stock MMBE by changing the UOm as a pieces you will get the stock in pieces and you can now issue the material in pieces too.
Experts pl guide if i am wrong anywhere

Adding Alternative Unit of measure as part of attributte of material

Hi gurus,
In our source system each material has alternative unit of measure which contain info on converting the base unit of measure (CAR) to MT and PAL.
I need to add this info as part of material attribute
e.g.
Material "A" 10CART = 1 PAL & 100CART = 1MT
This information captured in MM table "MARM" with material code as the
As part of 0MATERIAL_ATTR , i need to have additional field that capture the info as below
CARTPAL = 0.1 (1/10)
CARTMT = 0.01 (1/100)
Please help to advice on how to enhance the extractor to cater the above requirement.
Your help highly appreciated
Thank you

hi,
According to me you can enhance the 0Material_attr to bring the required information from ECC.
But before enhancing anything ask func consultant or business below ques.
1) will these unit entry will get created in MARM for any material at the creation of material or it will get updated later on
2) will this unit value get change for any material during its entire life
If any of above que ans is yes then how wud u manage in transaction data if unit get changed.
For that u need to apply feedback concept in transaction dso.
Regards,
Ashish

Alternative unit of Measure for variant material

Dear All,
Here is an interesting scenario,
There is a naterial Billet with two variant characteristics length and size. and base unit of measure is TON. Now alternative unit of measure is PCS. How can define the conversion factor on the basis of these two variant characteristics.
In normal material (without variant char.)
we can define conversion factor 1PCS= 2TON
For variant material,
For the material Billet with variant charc length and size how can i define conversion
so that system calculates diff. PCS with diff. length and size but material is same. So how can i Do that.
for example for same material Billet but variant char. Length is 6 M and size is 120*120 ,its wt will be 2 TON for 1 PCS.
for the same material Billet with variant char. length 12 M and size 120*120, its wt will be 12TON for 1 PCS.
How can i cater this for the same material.

Hi Shoaib,
We have faced the similar scenario for steel industry. Based on my experience, it is not possible to define variable values for Alternative UOM conversion with the variant characteristic/configuration, specially if you want SAP to maintain inventory with variable conversion rate.
Use the Batch specific unit of measure for this situation.
1) Create batch specific UOM i.e. Ton_per_pc (TOP) --- User proportional unit conversion
2) Create batch characteristic ton_per_pc and assigned UOm.
3) In material master additonal data select proportion unit and enter the standard conversion rate between ton & pcs.
4) While doing GR - In batch creation you can enter whatever the conversion rate is and Inventory will be updated accordingly.
Regards,
Ravi.

COPA reports - Quantity in alternative Unit of Measure

Hi all
My clients requirement is to dispaly quantities in both base UoM and alternative UoM in COPA reports. Alternative unit of measure and the conversion factor is maintained in the additional data of material master. After reading through several forums and documentation, i understand that this can be achieved using COPA enhancement COPA0005.
I am thinking of creating new value field to store the quantity in alternative UoM and to calculate the required quantity using the conversion factors in MARM table.
But I have a few questions regading the same.
1. There are 2 function modules EXIT_SAPLKEII_001 and EXIT_SAPLKEII_002. Which one should i be using for my purpose?
2. Should enchanement COPA0003 be actived first to make COPA0005 active?
3. Is any other configuration required apart from created in new value field for quantity in alternative UoM.
Thanks
Vamsi
Edited by: VamsiM on Mar 17, 2011 7:21 PM

Thanks Ajay for ur reply.
When I created the quantity value field (say VVXXX), added it to Op. Concern and regenerated the structure; the system itself created the quantity unit field VVXXX_ME for alt UoM. This field is also added to field catalougue and is also readily avialable for used in KE30. So I didn't have to create a new Characteristic.
In my case, the alternative UoM is not the same and depends on the material.

Issue in Alternative unit of measure (MARM) update using MM17

Hi,
I have tried to update alternative unit of measure (MARM) for some materials using MM17.
It is working for some unit of measures (Like FT).
But if I try to changes the unit of Measure value for PLB (Counter & Denominator) or DLB it is changing for UNC, if UNC unit of measure is not there for that material then the UNC is getting created.
But according to MM17 functionality I think PLB values should change.
Please check and let me, if you have any solution or any one faced the same issue.
Thanks
sham.

Hi Sham,
Your problem could be caused by wrongly assigned ISO codes to the unit of measures involved. Most probably to these unit of measures   the same ISO code is assigned. This leads then to problems in the ALE interface of the material master, which is used too by the mass maintenance transaction MM17.
There only the ISO-code is given and then the System doesn't know the correct unit of measure, which
should be used. So it is possible, that the change is done for a wrong unit of measure.
Please check for this your customizing in transaction CUNI.
Regards
Mauro

Requirement in alternative unit of measure

Hi,
A material is maintained with EA as Base unit of measure and alternative unit of measure is maintained as 100m=1 EA. when MRP is run, the requirement appears in EA and not meteres. The issuing UOM is maintained as M in plant/storage view. Is there a way to have the uom for the requirement in the reservation to be in Meteres.
thanks

Dear
Please check in BOM, routing according to the same UOM.
And in Stock reqyuirement list MDO4 click on the Settings there u ll find the general settings under that tab u find the UOM
basuunit of measure and alternate unit of measre in that u ll find the list
With regards
Pushpalas

GR IN ALTERNATIVE UNIT OF MEASURE

Dear Friends,
I want to know report for GR of production order in alternative unit of measure for a specific day.
Plz help me
Thanks
KK

Hi,
There is ni standard report in SAP for this.
As for the GR, this cannot be changed, you can disply stock in L or EA in many reports and transactions (MMBE and the physical inventory transactions can all be in either UOM for instance) but the main UOM for stock is the UOM defined on the issuing UOM on the plant / storage view of the material master. Or use MB51with movement type.
Or try report 'SAPMUNIT' from SE38
Regards,
R.Brahmankar

Mass upload of Alternative unit of measure using MASS

Hi All,
Can some one guide me how to upload alternative unit of measure using MASS Transaction - can you elaborate like fields to be considered also, as I am trying using MM17 but could not go further.
Thanks,
Vengal Rao.

it is possible to create alternative units using MM17. But I would not use the word upload in that matter, as you cannot upload from an external file.
start MM17-
select table MARM and execute
you see 2 tabs,
you are at the Change record tab, please set indicator for do not change existing data, then go to the creation tab
enter the material number and the alternative unit you want add .
then execute
Now you see your material number, the new unit and the material description
click the icon for field selection and add the field nominator and denominator (and all other fields where you usually enter data) to your shown fields.
enter the value of your choice and save.
if you want add the same value for nominator and denominator to all the materials listed, then enter the value in the fields that are listed above the listed materials. then click the header title above all fields that shall be distributed followed by the mass change button. Finally press save button.

LSMW - Alternative Unit of Measurement

Hi,
I'm dealing with something very very strange.
I'm trying to load the Alternative Unit of Measure for materials via a LSMW.
I'm using the Standard Batch / Direct input Method
Object               0020   Material master
Method               0000
Program Name         RMDATIND
Program Type         D   Direct Input
We need to have the conversion L & GAL and KG & LB.
GAL & LB are loaded as first. (This goes in very smoothly). These values are calculated with density.
Afterwards I load L & KG. So I'm using the function DIMENSIONCHECK_CONVERTABLE to calculate the converted versions.
So 90% loads like this, without any problem. But 10% of it goes wrong... When I check try to load this manually with exactly the same number I calculated, I can save the material without any issue. When I'm using the Job I get following issue: The alternative units of measure are inconsistent.
How is this possible? And how can I solve this issue without doing it manually?
Thanks!

Hi Prasad
In the Material Master - Sales org.1 view you have a field called Sales Unit.
there you give the desired UOM and press Enter then you will get a pop up for Conv.factors:Unit of measure, here you have to give the Conversion of the Material UOM to Sales UOM.
Ex. Material Measure is PC and Sales Measure is BOX
You need to specify How many peacies will BOX consist of
like 10 PC = 1 BOX like that you have to give in the Popup
Regards
Sree

No alternative unit of measure specified, during creation of sales order

Dear Experts,
when user is creating sales order, User is getting the error message no. MM108 "No alternative unit of measure specified" for particular material.
we have checked the alternative unit of measure it is already maintiained in the material master.
we have checked the OSS note : 117611 - Error message MM108 during goods receipt for order, but we couldn't get exact results for our issue.
can you provide the exact reason and solution to over come this please .
Thanks in advance.
Regards,
Suresh Veerepalli

Dear Experts,
The Base Unit of Measure (L) and Sales unit (PCE) ,The alternative unit of measure is maintianed in the material master as shown below.
X                  AUn               Measuremt unit text           Y                   BUn               Measuremt unit text
1     L     l     <=>     1     L     l
1.121     KG     kg     <=>     1.000     L     l
1     PCE     Piece     <=>     1     L     l
1     BDL     Bundle     <=>     12     L     l
1     PAL     Pallet     <=>     720     L     l
Error is gettting when creation of Sales Order ,Order is standard order.
When we double click on error message the following details are shown.
1.No alternative unit of measure specified
message no:MM108
2.Diagnosis:
   This alternative unit of measure is missing.
3.System response :
   The system cannot carry out conversion
4.Prodedure:
This is due to Program error that should not occur.
Please provide the exact solution on this issuse.
Thanks

Stock and Values in Alternative Unit of Measure

Similar Messages

Maybe you are looking for