Stock Balances uploading through Mvt type 561

Hello,
        We are uploading Stock Balances by T.Code MB1C through Mvt. Type 561. IN FI-MM Integration T.code OBYC, In transaction key "GBB" I have assigned GL Account "Stock Suspense A/c" for BSA. And in transaction key BSX, I've assigned
GL Account "Raw Material". After that when i enter stock balance through T.code MB1C, The document entry generated is as follows;
Posting Key      GL Account             Amount
     89           Raw Material A/c           XXXXX
     91*         Stock Suspense A/c      XXXXX
*The posting Key "91" is for COSTS, which i believe is incorrect, so where have i gone wrong? what is the solution?? Please help!!!
Regards
Ashwin

Hi,
I agree with ajay.
I think you want to know how this will effect u r Balnce Sheet. This is only a intermediary account for balance upload. In sap u uplaod u r trial balance in part using different transactions. For this u devide total transactions in gl, materials, ar, ap, assets etc and use different balancing account which in turn in total is having dr= cr as u r trial balance is having dr= cr.
Please revert if any querry

Similar Messages

Special stock indicator O to mvt. type 201?

Dear All,
The requirement is to clear the outside vendor stock against a cost center via migo.
Can we add special stock indicator O to mvt. type 201 ?
Can you also throw some light on the background of the process.
Thanks in advance.

Hi
You will not be able to add Special Stockindicator O to 201, even of you copy the movemnt & create a new movemnt , you will not be able to add the new entries.
Best way is to get back the Stock into Unrestricted use using 542 & then Post the goods issue using 201.
Thanks & Regards
Kishore

Create a Quality Stock directly using 501 mvt type

Hi ,
I am trying to map one scenario in which when i do the goods receipt using 501 mvt type in MIGO the stock should directly go in to the QM inspection
A inspection lot should be created automatically for result recording.
when i am doing 501 mvt with Stock type Quality Inspection the system giving me an error as below
Change the inspection stock of material ISUUS6-M-W-1IN-10 in QM only
Regards
Amar

Hi,
        1) Activate 05 inspection Type in the qM view of the material master
        2) Do the GR with Mvt type 501
        3) Inspection lot is created
With regards
Yas

Quality data for stock uploading using movement type 561

Hi,
As system Go-Live business wants to have quality certificate for all FG from SAP. But part of data for quality certificate is of intermediate materials which is already conumed for production of FG so stock is zero for batch of consumed SFG. (ALL FG AND SFG IS BATCH MANAGED). We can upload FG part of quality data require for certificate as FG stock with batch number will be uploaded as initial stock upload with 561 goods movement. But how to manage SFG part of quality data, as stock for consumed batch of SFG will be zero and hence can not have inspection lot for SFG batch.
Can anyone suggest how to upload quality data for material?
Help to resolve this issue will be rewarded with points.
Thanks and regards,
Devang

Hai PK,
For Plant to plant stock transfer, follow the below steps,
1) create STO in ME21N with Item category U
2) create delivery document
3) PGI
4) create Excise Invoice
5) create Billing document
6) GR at receiving plant referring delivery doc. and perform Excise capture simultaneously or separately
Hope it will helps you..
Thanks & Regards,
Kumar

Mvt type 561

if i load a material with mvt 561. does system sytem creates accounting doc for the same ?
bcoz i have load a material with 561 (initial upload) but i cant accounting doc for the same.

Hi
For the material type value updation tick box is there or not for the particular plan?
If it is not there, juct check the check box for the material type.
SPRO - SAP IMG- Logistics general - Material master - basic settings - Material type- Define attributes of material type. Check for the particular material type.
Regards,
Raman

Mvt type 561 issue

Hi , All
I have an issue of incorrect use of mvt 561.
we are using backflush MBFB to issue the material for production.i.e at time of dispatch of finish good we consume the material as per our BOM of finish product
and thus the inventory is reduce by back flushning it.
Due to some problem the stock is below required quantity and back flush is not possible so what user do he post good using mvt 561 to make stock level.
They call it as stock charge
I know what he had done is not correct but it was too late.
what i want to do is to track all the posting and also the reverse posting .
how can i list this
thanks

H,
List down the posted 561 documents using MB51 transaction code. Use the user name and posting date range if you can guess, on the selection screen ( materials, plant# etc...to narrow down search)
Equivalent quantities of each fo the above materials need to be brought into corresponding plant/sloc by using say Purchase Orders first (from external vendors, if those are bought out raw materials from vendors)
Once the stock is built, you can use 562 to knock out the earlier 561s posted by mistake by your user. If it is your production system, in general, we should disallow authorization to use 561 and 562.
Regards

Field selection for movement type 561

Hi Guru's,
i want to add value field in the movement type 561 to while uploading the stock i can add the total quantity with total value, if i am wrong correct me, with detailed process.
Regards,
qsm sap

Hi QSM SAP!
The value of the stocks to be uploaded using MvT Type 561 can be placed in the External Amount in Local Currency Field. To show this field during goods receipt:
SPRO - MM - IM and PI - Settings for Enjoy Transactions - Settings for MIGO - Field Selection per MvT Type - New Entries - (561 EXBWR) then set as either required or optional.
Hope this helps! =)

501 and 561 mvt type

Hi
wt is difference metween 501 and 561 mvt type,when we use,accounting documents will show or not both 501 and 561,
plz clarrify.
Regards
mohan

Hi
Both the movement types 501 and 561 are used for goods eceipt without reference document
501- goods receipt without reference to purchase order to unrestricted use stock
561- When you are doing mvt type 561 means initial entry of stock balances withot any reference documens(purchase order production order or reservation) from legacy system to SAP system.
No physical material movements occurs during this process.
The quantity recorderd posted to selected stock type and increase the valuated stock of the material.
The valuation of the stock to be recorded depends on two factors
1.The data in the material master record( price control, current valuation valution price)
2.Wheather you enter a value for the quantity to be recorded in the initiial entry of stock balances (EXTAMT.LOC CURRENCY in the item details on the quantity tab page in MIGO screen.)

Creation of Multiple Account Groupings for Mvt.Type 201

Dear All,
We have one material code for a consumable material type and one valuation class attached to it. We have one Stock G/L account and multiple consumption G/L accounts. We need the post to multiple consumption G/L accounts and cost centre when we issue goods through Mvt.type:201.
What are the configuration settings to be done to create multiple account groupings in SAP . ECC6.0.?
Regards
Saikat

Hi
For the scenario described by you, you need not have to make any config settings. The G/L account defined in SPRO (Valn and Automatic Acct Determination) is used for Automatic Account determination i.e. when you do not enter a specific G/L account during Goods Issue.
As can be seen from your query, you want Consumption account to be posted to different G/L accounts but the material is assigned only to 1 Matl type. There are 2 ways to solve this problem:
1. If you know the G/L accounts that the system should post to before hand i.e at the time of Matl creation itself, then you can configure Split Valuation and then assign more than 1 Valuation class to the Matl. For each of these Valn classes, you can configure Automatic Account assignment. By doing this, at the time of Goods Issue, the system will ask you the Valn type and will accordingly post to a seperate G/L account.
This is possible only if the no of G/L accounts per Matl is less (preferably 2-3)
2. If you do not know the G/L accounts before hand or the G/L accounts per Matl consumption is too many, then it is better to go for Manual Automatic Account assignment.
In this procedure, at the time of Goods issue using Mvt type 201, you can specify the G/L account and Cost Centre in Th Account Assignment Tab.
Hope this clarifies.
Thanks

Movement type 561 issue

Hi
By mistake an user has uploded stocks of 1 material 1000 units thro movement type 561 in production server and saved it
The article doc got generated and the stock is showing in MMBE
How to reverse that
Is it advisable to use movement type 562 ?
Pls let me know its implications
I am a SD consultant and this is a MM real time issue
Hence i need your help
Regards
Raja

Hi
You can do in migo the reversal for the mvt type 561 by using 562, it will not affect any where in the accounting, if you do GR reversal the stocks will reduced automatically from the mmbe
Reghards
velujee

Excise Posting in Mvt Type Sample Withdrawl

Hi
1) client is manufacturing goods in batches.
2) They keep sample for testing from each batch, Since it is finish goods and consider as exciseable material.
3) Every sample are posted through Mvt Type 333 to Consumption account.
3) Actual requiremnt is create new Mvt Type for the Sample withdrawl, For which two accounting posting done in the system.
One for the material and
second for the Excisable document.
I have copied Mvt Type 333 and created new Mvt Type 733.
At where i can do customizing for the Excise posting.
Please help
Thanks

Hi,
As I believe youu2019re mentioned about finished goods and 1st decide, when excise going to be applicable:
Once finished goods manufactured in the factory
OR
Once finished goods goes out from factory premises.
If excise applicable for finished goods when goes out from factory premises, then no need to worry ,just after production you can take sampling where you will have two accounting enter which reduces from inventory stock of finished goods by debiting G/L account of sampling.
If excise applicable for finished goods when just finished manufacturing in the factory, then you need to find how to do it , which & when register (RG1) to update with which movement type and then think about sampling.
But if for sampling excises need to be updated, then movement type must be added to update excises.
NOTE:
Movement types specified relating to goods receipts involve excise invoices & which excises register need to be updated in the following path
SPRO ---> Logistics general -> tax on Goods Movements-> India -> Business Transactions-> Specify Which Movement Types Involve Excise Invoices
Regards,
Biju K

Error while doing GI to cost center (201 Mvt type)

Hi,
While I tried to do Goods Issue to Cost center through mvt type 201. I get the following error.
"Account type K is not defined for document type WA"
Kindly help reg it.
Regards,
Vimal

Hi,
Go to OMB6 and maintain the Entry in this field is optional.
Thanks & Regards,
Kiran

Business area not showing in goods recipt mvt type 101 in account assignmen

when we doing goods recipts through mvt type 101 , Then accounting doc is genreted but in account assignment Business area doesn't show. business area is alraedy assigned with sales area. pls help
Regards,
Rahman

Please check whether in the material master the same division is maintained as of in the configuration or not.
Regards,
Indranil

MB1C - Sloc 0001, Mov type 561 (not able to post the goods)

When I post inventory for ROH material
using movement type 561 (Tcode:MB1C) with
SLOC 0001, the system errors outs with the following message
"Material XXXX doesnot exist in warehouse 001"
Iam not maintaining warehouse management for ROH materials.
But I am able to post for the same material with Sloc 0002
Its the issue with sloc 0001
System posts the following Message:
Material XXXX does not exist in warehouse 001
    Message no. L9023
Diagnosis
    All the materials that you use within a warehouse number must also be
    defined for this warehouse number. The material you are using is not
    defined.
Procedure
    If you want to use the material within your warehouse number, you must
    create the material in the material segment for that warehouse number.
Is there any workaround, where I need not maintain WHSE management view for ROH
materials but still able to post the goods with Sloc 0001

Csaba/Rajesha:
Thank you for your replies
For the Sloc 0001, like mentioned it is assigned to whse number 001
I tried to remove/delete the whse number 001 for the sloc0001, but its a entry required
field
In order to fullfill the requirement, maintained the same whse number(HMM) that is
being maintained for sloc 0002 {for which I was able to post (Mvt type 561, Tcode MB1C)}
In MB1C Mtype 561 posted with sloc 0001, Now the system posts
"Material XXXX doesnot exist in warehouse HMM" (previously it gave "Material XXXX doesnot exist in warehouse 001")
It does not give the message for Sloc 0002
Any way in this process, I learned some new things
Due points have been assigned

Report to check the stock transfer through 303 mvt type

Hi,
I understand that the stock transfer can be done through two ways
1. Using 351 against UB PO and go MIGO using 101 --> Can be checked in the report MB5T, for stock in transit
2. Using 303 and 305 mvt type --> the stock lies in Stock trans(Plant)
When we do 303 mvt type, is there any standard report to check the stock in stock trans (Plant) ? Please let us know.

hello
for this you can use MB51 only. same report you can give the movement types as 313 & 315.
Laxman

Stock Balances uploading through Mvt type 561

Similar Messages

Maybe you are looking for