Stock category 'Q' in Delivery

While creating Delivery w.rt. STO, Stock Category 'Q" is automatically picked.
this happend today. Can anyone say where the setting is?

do you use batch determination or stock determiantion?
What stock category is entered in the PO?

Similar Messages

  • GR Blocked stock process in Inbound delivery.

    Hi All,
    I want to do the GR blocked stock process through inbound delivery.
    But while i create Inbound delivery, system is automatically picking 101 movement type.
    How to proceed.
    Thanks in advance
    Regards
    KK

    Check in
    Spro -> sd -> sales -> sales documents -> sales docu item -> define item categories
    Here i think the entry for your Z item category is not done, please take the help of your SD personnel & the issue should be resolved.
    Hope the above helps.
    Regards,
    Vivek

  • Inv. Consign. - Stock category K  is not permitted for general stock search

    Hi,
    IS-Retail ECC 6.0
    Unable to select another vendor consignment inventory for the same article at TO creation. Get the following message:
    +Stock category K  is not permitted for general stock search+
    +Message no. L3727+
    +Diagnosis+
    +You have entered a stock category (special stock indicator and special stock number) during transfer order creation that is not permitted by general stock determination.+
    +Example:+
    +General stock determination only allows you to enter stock categories 'own stock' and 'consignment stock' of vendor 6411. You cannot enter special stock 'K' and special stock of (vendor) 6512+.
    Not using batch management but already applied OSS note1034907 - Picking consignment stock in Warehouse Management without success.
    Any idea?
    Thanks
    Gaetan

    There is the response back from SAP on the subject. We also faced the situation where the stock determination was done but we had no stock available for the first sorted stock in this case our own stock. We have than created a user exit to take out any 0 line item from the sort to bypass this problem and get the next stock vendor available . Hope that will help.
    Gaetan
    In the retail consignment processing the stock split is excluded during
    stock determination. That means, you have to set the stock split to 1.
    In your case, if you check the customizing settings of the stock
    determination for
    - site 1100,
    - stock determination rule Z001 and
    - stock determination groupe Z001,
    the stock split or the number of splits is 002. But, this is not
    possible in coherence with the retail consignment processing and the
    creation of a TO. We will prevent such a scenario also in the coding.
    Therefore you are not able to select another vendor for consignment. In
    this case you have to change/adjust your customizing settings for stock
    determination. Please check also the usage of an alternate stock
    determination rule.
    For further information, please check/compare also the documentation.
    Customizing documentation:
    When stock determination is activated, the stock split is excluded
    during stock determination, which means you have to set the stock
    split to 1.
    Documentation in the Help Portal:
    * It is not possible to make a partial delivery of a delivery item
    from both consignment stock and a company's own stock. Nor can you
    deliver an item from the consignment stock of serveral special stock
    managers.
    That means, please check/adjust your customizing settings for the stock
    determination.

  • Regarding Schedule line category for Reverse delivery

    Can any one pls let me know what will be the schedule line category for reverse delivery after cancellation of invoice?

    FYI-
            reversal of delivery only reverse the stock & accounting doc's. To do this seperate mov type is used which is linked with the actual Goods issue mov type i.e. 601 ( ref: Tx-OMJJ)
    for every mov type there is reversal mov type is assigned to reverse the transaction.
    for reversal no schedule line category is required.
    Regards,
    Reazuddin MD

  • How to change stock category of handling units at mass level without Development

    Hi,
         We have hundreds of handling units with stock category "blank" in our returned stock storage location which is HU managed. MMBE shows different
         value in Return stock  what  we see in HUMO is  only One HU with very less qty. visible with stock category "R".inventory stock is different than the    
          HU  stock visible in HUMO
         can some one help in explaining how can we change the stock category of HU's from Blank to R. is there any standard process offered by Sap.
         Development of program to get it done is out of scope right now
         Thanks,

    i am struggling to figure this out too.right now we if i look into MMBE i see the returned stock
    value.but HUMO does not show any handling units with stock category R when searched
    though Storage location is HU managed.i suspect user has done GR without delivery which cause the dependency.
    Thanks for quick response.

  • Inventory report for stock category B

    Hi everyone,
    We are trying to generate a customer stock inventory report with stock category B. The table MARD is not displaying any values annwe also looked at table MKOL. Its not giving us any. How do i get the inventory report for this stock type B. Kindly Advise.

    it is customer owned stock. We receiver materials from customer for repair and we recondition them and we give it back. for this we maintain it in stock type B. it is specifically used in aerospace industries. We want to make an inventory report for this customer owned stock in our inventory . i am unable to get the table. Kindly advise

  • Made a UD to 'Scrap'. But Stock Category is "Q" and does not show in MMBE "Blocked"..WHY?

    Hi,
    I made a UD of an Insp Lot to 'Scrap' in the Inspection lot stock tab.
    The system automatically created a material document with movement type 553 (Direction -) and 551 (Direction +)
    However the stock Category in the material document is "Q". IS THIS CORRECT? SHOULD THIS BE "S" (This is in the WM tab of the material document).
    Also when I query MMBE after the above UD to Scrap, the batch quantity is not shown either in Quality or Blocked stock. IS THIS CORRECT?
    Please advise.
    Regards
    Priyanka

    My understanding was when I input a quantity in 'Scrap' field during UD
    1) The stock should be blocked (hence it will show under blocked stock column in MMBE)
    2) The stock category should be "S" and not "Q"
    I agree that in MMBE based on your explanation the stock should not be shown in blocked.
    But can you explain why the stock category is "Q" instead of "S"
    Regards
    Priyanka

  • Create Stock Category

    How can I create a new stock category?
    Right now we have 4 separate categories....
    1 - First
    2 - Second
    C - Closeouts
    S - Samples
    Where in SAP can I create a NEW category?  (example: "3 - Third")

    Yes I have, I've created multiple characteristics using the "Chars Group" "AFS characteristics for categories" under the Basic Data section of the Basic Data tab.
    Unfortunately, none of them show up under Category Structures or Coverage Strategies in SPRO.
    How exactly do I edit the settings of a coverage strategy in SPRO?  There does not appear to be any options availbale when a coverage strategy is selected.  Is this something that is taken care of under CT04?  Or am I not understanding how a coverage strategy works?  What is the difference between a Characteristic and a Catagory Structure and how can I edit or change the settings of a catagory structure?
    Edited by: Cameron on Dec 3, 2009 9:51 AM
    Edited by: Cameron on Dec 3, 2009 10:14 AM

  • Re-configure 'Stock Category' in the Warehouse Management system

    Hi Gurus,
    As we all know, it is possible to see which batch/material is in blocked status because the system highlights it with stock category indicator "<b>S</b>". With this, I would just like to know if it is feasible to modify the configuration in the system so that it assigns the Stock Category (labelled as '<i>C</i>' in transaction LS26) as follows:
            <b>S</b> : blocked without a usage decision
            <b>R</b> : batches which are blocked because they were rejected (there was actually a usage decision)
    Please let me know your thoughts regarding this matter.
    Hope you can help me on this one. Thanks in advance.

    Hello Francis,
    I think it is not good idea to change the standard SAP settings becuase we are not sure where our changes will impact. However, the SAP system is behaving in the same way you want, the only thing is you need to do relevent transaction at inventory level and subsequently carry out posting change in Warehouse System.
    Quality stock with stock indiacator 'Q'
    Blocked stock with Stock indicator 'S'
    Return stock with stock indicator 'R'
    Hope this helps.
    Arif Mansuri
    Reward if answer is helpful.

  • Cross Docking for stock category Q (inspection stock)

    Hello everyone,
    My client uses cross docking in 4.7 release and recently a requirement came up where they wanna be able to cross dock stock received from production while the User Decision from QM is still pending.
    I have tried to walkthrough the code behind planned/opp cross docking and realised that only available stock is taken into consideration.
    I d be really grateful if anyone could suggest how to best approach and tackle this issue? Please consider that the quant should not lose the inspection lot number so that once UD is given, the stock category changes automatically.
    Thank you
    Kind Regards

    Yes it is possible. In the IM/WM interface tables, in the second table, you can vary the process according to stock status. See the third column.
    LogisticsExecution \ Warehouse Management \ Interfaces \ Inventory Management \ Define Movement Type
    Following is the config. help text for the field
    Special Stock Indicators for Whse Mgmt
    Use
    In the Materials Management system you can post different transactions using one movement type.  For example, posting goods receipt to unallocated stock or goods receipt to
    stock in quality inspection.
    These transactions are treated differently by the system on the basis of this indicator.  Together with other indicators of a movement type in the Materials Management system, this indicator is used to correctly allocate a movement type in the Warehouse Management system so that the transaction can be posted accordingly.
    Regards,
    Nick

  • How to use Stock Category Group for two different configuration.

    Hi all,
    I want to use the stock category group to do this scenario:
    I have two process using the same location, the process A wants to consider Stock cat. Grp. 'ZSW' (SAPAPO/LOC3) so it will consider Stock using CC, CF and CE. The process B wants to consider Stock Cat. Grp. 'ZST' to consider only CC.
    My doubt:
    How can I do that setup to make different things according the process? I tried to do something in Planning Area (SAPAPO/MSDP_ADMIN) but doesnu2019t work.
    Can anyone help me?
    Thanks,
    -Ralph Veiga

    Hi Ralph Veiga,
    Indeed the stock category group is define at location level...
    I think your answer involves macros more than PA settings.
    First I will suggest to split the stock key figure into 2: one for CC, one for the other.
    For the CC, use the standard (cetegory group with CC only on the location master)
    Now you need to populate the second key figure with CF and CE.
    You should be able to built a macro using function PHYSICAL_STOCK() to get what you want.
    For sure yuo first need a way to check if you want or not the CF and CE. Here implement your own logic for exemple base on your product characteristics with either MAT(), MAT_C(), MAT_EXTRA(), MATLOC_C()...
    Else you can use a Z function in the macro to collect this data, but it involves ABAP coding.
    PS: you don't actually need to split the key figure into to, but I think it helps with visibility...
    Regards
    Julien

  • Issue in stock category

    hi,
      i am posting gr.po in migo for x- material as 10 quantity then TR is created automatically with stock category as "Q" after quality inspection once i put TO for that material the stock category as "Q" not as available stock . my requirement is whenever goods came it moved to qc then only it moved to warehouse. how to achive this flow.......because once i put gr the transfer requirement is created with stock category as "Q'. so if i proceed  this TO created with Q category.
    thanks
    muthuraman.D

    hi,
      as per suggestion first one  soution i go for manual TR its working fine but one more issue arises. when i post gr/po in migo the stock  get increased in warehouse as stock category as 'q' with +ve quantity and _ve quantity looking for posting change TO and then i put manual TR -TO-confirmation  for purchase order stock moved destination bin  with stock category as unrestricted stock,but my problem is  stock in posting change quantity still there.
    my requirment is once i post gr the stock never get updated in wm level. once i put manual tr-to  then only it should updated.....other wise two stock are updated one for manual TR and another for migo posting(waiting for posting change in interim area  with -ve and +ve quantity values)....how to avoid that....kindly explain..........
    Thanks
    Muthuraman.D

  • Date of the Stock 'Category :CC'

    Hi,
           When a stock (Category: CC) is transferred from R/3 to APO , I can view the  stock quantity with the current date in the IO_TIME field in the product view. But suddenly I noticed for all the product location the date has changed to 01.01.1970. I don't understand y its happening? Is there any settings to be maintained for this?
    Please clarify.
    Thanks,
    Siva.

    Hi Siva.
    That is the default date for CC. In effect the beginning of time as far as apo is concerned as there is no relevance of the date for stock.
    Hope this helps
    M

  • 2LI_03_BF Material Stock Type and Stock Category Determination

    Hi All,
    I need your help in determining the stock type and stock category of a certain material.
    Is there a way to determine it manually? cause i tried to look at the MSEG table and it does not show anything but when i try to run the material document that contains the movement/material it populates the stock type and stock catertory in the setup tables.
    Regards,
    Alden

    Hello
    1) 2LIS_03_BF clearly gives you the receiving plant and the issuing plant. For eg if you are doing plant to plant transfer there will be 2 entries in 2lis_03_bf , one for issue and one for receiving. You can bifurcate the receiving plant and the issuing plant by using either process key (BWVORG ) or debit credt (SHKZG)  (H stands for issue & S stands for receipt).
    2) 0MAT_PLANT_ATTR  provides you the plantwise specila procurement type
    3)  you will get  VBUK-GBSTK in the standard source 2LIS_11_VASTH . You will have to combine the data at the BW level
    Regards
    Gajesh

  • Additional Stock Category Considered in SNP Heuristics

    Hi,
    The customer has a requirement to add 'inspection stock' into the SNP Heusrics planning considerations. The stock is already CIF'ed to APO, and is already seen in RRP3 Product view.. So I think part of the work is done. What further do I need to do to get it added to the key figure in the SNP Planning book?
    I have looked at MSDP_ADMIN and the details of the key figure, The stock key figure used here is listed in many planning obj structure, eg 9AMALO, 9ASNPBAS etc. But in all of them there are no category groups or individual category settings assigned... and it is actually greyed out and I cannot add one. So im not sure what it is working on today, even before the new customer requirement.
    Is stock as a key figure different than others? I understand category groups and how they are used in ATP Issues / Reciepts for deployment.. but this appears to be a different setup? (as it is blank currently)
    Other posts seem to have menitoned something about the SNP tab of the location master data in APO. 'Category Groups for Stocks'.
    Do I need to create a new category group in SPRO customising, and then add it to this location master data? or the key figure? or both? or none?
    Please help.
    S SB

    Answering my own question now I have found the answer for the benefit of others:
    When a specific stock category group is assigned in the location master then the sytem considers all the stock categories assigned to that category group while calculating the initial stock.
    If no stock category group is assigned in location master then the system looks at the category group "ST1 - Opening stock" in SPRO and considers all categories in cat group ST1 while calculating the initial stock.
    So to include CF / CI / any other cateogy in the initial stock calculation , all you have to do is assign those categories to ST1 category group . Once this is done you will be able to see the difference in your initial stock.
    There is NOTHING required in MSDP_ADMIN. Tested and confirmed.

Maybe you are looking for