Stock Comprometido

Hola a todos,
Tengo una duda respecto del consepto Comprometido en SAP
Yo entiendo que dicho consepto obedece a la cantidad total en ordenes de venta abiertas para un producto en particular (total de producto por facturar)
El tema es que me he encontrado con algunos ejemplos en que dichas cantidades no coinciden.
¿Existe algo adicional respecto del consepto Comprometido que haga variar dicho número y yo no esté considerando?
Agradezco desde ya a quien pueda ayudarme.

Hola...
Te adjunto un extracto del manual de ayuda...
Comprometido
Visualiza el stock de artículos reservado para clientes y uso interno. El stock reservado para uso interno es la
cantidad del artículo que se utilizará en un producto acabado basándose en las listas de materiales de las
instrucciones y las órdenes de trabajo existentes.
En otras palabras, el comprometido tiene relación tanto con las Ordenes de Venta y las Facturas de Reserva como con las Ordenes de Fabricación.
Te sugiero chequear o revisar el informe de inventario Status de Stock. En el mismo puedes visualizar el comprometido y el solicitado de cualquier producto...y los documentos que sustentan dichos estados.
Espero te sea de ayuda
Saludos Cordiales,

Similar Messages

Detalle stock Comprometido

Estimados:
Alguien sabe como puedo obtener el detalle de la cantidad comprometida y solicitada que tengo de un articulo?
Ej.
Modulo Inventartio - Informes de Inventario - Stock en Almacen - Detallado.
Articulo En stock Comprometido Solicitado Disponible
0003CB 264 118 100 246
Gracias de atemano.
Saludos,
Viviana Medina.

Disculpen, pero no me resulta.
Esto es por modulo Inventario, datos maestro de articulos, pestaña datos de inventario, doble click sobre la linea de la bodega correspondiente?
En que version de SAP?
Gracias. Saludos,
Viviana Medina.

Alarma stock minimo

Tengo una duda como neofita en sql quiero generar una alarma de stock. tengo este query el cual esta bien y me genera la alarma bien, el problema es que no me aparecen todos los articulos, solo meaparecen 78, esto quiero saber si es limitación del sap. y si es así como le puedo hacer para que me aparezcan los 78 mas importantes, es decir que tengan mas comprometido y menos stock. me ayudan trate de hacer esto, pero me avienta los 10 primeros que me aparecen en la lista, asi es que no es nada lo que yo quiero, a ver si me pueden ayudar.
SELECT TOP 10 t0.[minlevel] , T0.[ItemCode], T0.[ItemName], T0.[IsCommited], T0.[OnHand],
T0.[MinLevel] FROM OITM T0
where (t0.[minlevel]+t0.[iscommited]>t0.[onhand]) and t0.minlevel<>0 and t0.iscommited<>0
ya se que existe el de desviacion pero ese no me sirve. por favor alguien que pueda ayudarme...no le entiendo bien al TOP :S
Edited by: mary merecias on Jun 19, 2009 11:04 AM

aqui esta el codigo que gordon edito.
SELECT TOP 10 T0.[ItemCode], T0.[ItemName], T0.[IsCommited], T0.[OnHand], T0.[MinLevel]
FROM DBO.OITM T0
where (t0.[minlevel]+t0.[iscommited]>t0.[onhand]) and t0.minlevel <> 0 and
t0.iscommited <> 0
ORDER BY T0.[minlevel]+t0.[iscommited]-t0.[onhand] DESC
Si funciona muy bien, por si alguien le sirve.
thks gordon

Can our hp laserjet enterprise 500 color printer m551use 67lb card stock?

The printer specifications list card stock but no weights.
This question was solved.
View Solution.

Hello,
the required media weight is not supported by the printer.
As you may find listed within the Media Weight specification below, the printer support up to 58 lb media.
Media weight:
Tray 1: 16 to 58 lb (plain); 28 to 58 lb (glossy);
Tray 2: 16 to 43 lb (plain paper); 28 to 58 lb (glossy paper)
You may find the product specification below:
http://h10010.www1.hp.com/wwpc/us/en/sm/WF06b/18972-18972-3328060-15077-236268-4184772-4184773-41847...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

MB5B Report table for Open and Closing stock on date wise

Hi Frds,
I am trying get values of Open and Closing stock on date wise form the Table MARD and MBEW -Material Valuation but it does not match with MB5B reports,
Could anyone suggest correct table to fetch the values Open and Closing stock on date wise for MB5B reports.
Thanks
Mohan M

Hi,
Please check the below links...
Query for Opening And Closing Stock
Inventory Opening and Closing Stock
open stock and closing stock
Kuber

Adobe Stock Photos Stuck in Trash and Photoshop CS2 won't run!

Okay, I apparently did something stupid. I'm not even sure how this happened, but I realized that Adobe Stock Photos folder was sitting on my desktop (I'm using OS X 10.5.6). I don't know when this happened and I didn't think I needed it so I dragged it to the trash. NOW I cannot run any of my Adobe software (includes Photoshop CS2, Illustrator CS2 and GoLive CS2).
I can see the folder sitting in my trash, but it won't let me drag it back out. So, just as a test, I tried dragging out the one other file (.jpg) and I can't get that one either. I know this isn't a Mac forum, but I'm desparate and cannot find anything to help me.
Probably I am going to have to reinstall everything and (of course) I can't find my CDs!!! Please don't get angry if I'm asking the wrong question. I've done an internet search and I cannot find any solutions.
Thanks, Anne

Adobe stock photos does not even exist anymore.
Have you tried deleting your trash? I have no Adobe stock Photos on my computer and everything works. try restarting the computer.

Consignment stock is NOT getting displayed in the MC.9 trnasaction.

Hi experts,
We have some vendor consignement stock for some of our materials.
In inventory trnasactions like MMBE, MB54 it is corrctly displayed.
In the structure S032 also the consigment stock was updated. But we are not able to see this Consignement stock in the transaction MC.9
Mc.9 is showing ZERO consignment stock.
What is the reason for this?
How to correct this?
Please help us in solving this.
Regards,
Vijove

Hi,
Your question can be answered in this [forum Topic|ABAP Development; in a shor time..
Regards
Narin.

Report for Missing qty in stock transfer

how to Create a Missing Quantity list that gives the difference between sent and received quantities during Stock transfer. and send me tables involved in that, primary keys also

suppose, if we transfer goods from plant to plant or St loc to st loc with in one plant, if some goods missed due to some problems, i need that info.
diff beteen sending stock of plant 1 and receiving stock in plant2
Where can i gte all this fields

Purchasing Report for invoice and stock

Hi guys,
in your opinion does it exist a unique report which contains the following informations for suppliers:
-          invoice codes from supplier not yet paid
-          POu2019s to supplier not yet delivered
-          ATH stock at supplier
At the moment my customer separates informations per supplier via FBL1N (invoices not paid), ME2L or ME2M (open for delivery), and MB52 (special stock, type O)
Iu2019m looking for a solution were this 3 information will show on 1 screen by entering the supplier.I have tyed with ME2M but it is not sufficient...
Thanks in advance best regards
Massimiliano

hi,
What are you trying to get is an Updates from three different area, which are not connected to each other..
FBL1N will get updated once the Payement is done,
ME2M would be updated once the GR is done, (ME2M does have any selection Parameter which will include 'Payement done')
MB52 would be cumulative Stock on Hand (this stock deoesnt link to PO)
However, you can go for a small Z program to built a customised Report.

Report for stock statement

hi guy's,
   i am doing report for the stock statement .... my issue is in MB5B if i reverse some document it shows as it move's to issue QTY and my receipt is same but my closing stock is correct ...is there any std report avalible ....
thank's in advance

Use this code :
TABLES : MSEG,MKPF,MARA,MAKT,BEWART,MSLB,BSIM.
TYPE-POOLS : SLIS.
DATA : IT_FLDCAT TYPE SLIS_T_FIELDCAT_ALV,
       IT_LIST_HEADER TYPE SLIS_T_LISTHEADER,
       IT_EVENTS TYPE SLIS_T_EVENT,
       GS_LAYOUT TYPE SLIS_LAYOUT_ALV,
       WA_SORT TYPE SLIS_SORTINFO_ALV,
       IT_SORT TYPE SLIS_T_SORTINFO_ALV,
       REPID LIKE SY-REPID,
       FRM_DATE(10),TO_DATE(10),
       DISPTEXT(255),DISPTEXT2(255).
TYPES : BEGIN OF ST_OPBAL,
         MATNR LIKE MSEG-MATNR,
         MAKTX LIKE MAKT-MAKTX,
         BATCH LIKE MSEG-CHARG,
         BWART LIKE MSEG-BWART,
         MENGE LIKE MSEG-MENGE,
         ZEILE LIKE MSEG-ZEILE,
         WERKS LIKE MSEG-WERKS,
         SOBKZ LIKE MSEG-SOBKZ,
         BUDAT LIKE MKPF-BUDAT,
         SHKZG LIKE MSEG-SHKZG,
         DMBTR LIKE MSEG-DMBTR,
         MBLNR LIKE MSEG-MBLNR,
         LGORT LIKE MSEG-LGORT,
       END OF ST_OPBAL.
DATA : OPBAL TYPE ST_OPBAL OCCURS 0 WITH HEADER LINE,
       TMP_OPBAL TYPE ST_OPBAL OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF BAL_NOREF OCCURS 0,
          MATNR LIKE MARA-MATNR,
          SHKZG LIKE MSEG-SHKZG,
          DMBTR LIKE MSEG-DMBTR,
       END OF BAL_NOREF.
DATA : BEGIN OF OPBAL2 OCCURS 0,
         SNO(3)      TYPE N,
         MATNR       LIKE MSEG-MATNR,
         MAKTX       LIKE MAKT-MAKTX,
         OP_BAL      LIKE MSEG-MENGE,
         OP_STKVAL   LIKE MSEG-DMBTR,   "NEW
         REC         LIKE MSEG-MENGE,
         T_OPBAL_REC LIKE MSEG-MENGE,
         REC_STKVAL LIKE MSEG-DMBTR,   "NEW
         ISS         LIKE MSEG-MENGE,
         ISS_STKVAL LIKE MSEG-DMBTR,   "NEW
         SALES       LIKE MSEG-MENGE,
         T_ISS       LIKE MSEG-MENGE,
         CL_BAL      LIKE MSEG-MENGE,
         BATCH       LIKE MSEG-CHARG,
         SUBCON      LIKE MSEG-MENGE,
         CL_STKVAL   LIKE MSEG-DMBTR,
       END OF OPBAL2.
DATA SERNO(4) TYPE C.
DATA OPTOT TYPE P DECIMALS 3.
DATA RECTOT TYPE P DECIMALS 3.
DATA ISSTOT TYPE P DECIMALS 3.
DATA TOTALL TYPE P DECIMALS 3.
DATA FLG        TYPE N.
DATA FLAG       TYPE N.
DATA STOCKVAL        TYPE MSEG-DMBTR.
DATA REC_STOCKVAL    TYPE MSEG-DMBTR.
DATA ISS_STOCKVAL    TYPE MSEG-DMBTR.
DATA CL_STKVAL       TYPE MSEG-DMBTR.
SELECTION-SCREEN BEGIN OF BLOCK X WITH FRAME.
     SELECT-OPTIONS: P_MATNR FOR MSEG-MATNR,
                     P_MGRP FOR MARA-MATKL,
                     P_DATE FOR MKPF-BUDAT,
     P_PLANT FOR MSEG-WERKS DEFAULT 'NB01' OBLIGATORY NO INTERVALS
                                                NO-EXTENSION .
     SELECT-OPTIONS: P_STLOC FOR MSEG-LGORT NO INTERVALS NO-EXTENSION.
SELECTION-SCREEN END OF BLOCK X.
INITIALIZATION.
   REPID = SY-REPID.
   PERFORM FILL_FLDCAT USING IT_FLDCAT.
   PERFORM FILL_EVENTS USING IT_EVENTS.
   PERFORM FILL_LAYOUT USING GS_LAYOUT.
START-OF-SELECTION.
CONCATENATE P_DATE-LOW6(2) '.' P_DATE-LOW4(2) '.' P_DATE-LOW+0(4)
INTO FRM_DATE.
CONCATENATE P_DATE-HIGH6(2) '.' P_DATE-HIGH4(2) '.' P_DATE-HIGH+0(4)
INTO TO_DATE.
CONCATENATE TEXT-003 FRM_DATE' TO : ' TO_DATE INTO DISPTEXT.
CONCATENATE TEXT-004 P_PLANT-LOW ' Storage Location : ' P_STLOC-LOW
INTO DISPTEXT2.
PERFORM FILL_HEADER USING IT_LIST_HEADER.
SELECT A~MATNR
          F~MAKTX
          A~CHARG
          A~BWART
          A~MENGE
          A~ZEILE
          A~WERKS
          A~SOBKZ
          D~BUDAT
          A~SHKZG
          A~DMBTR
          A~MBLNR
          A~LGORT
          INTO TABLE OPBAL
   FROM MKPF AS D JOIN MSEG AS A
           ON DMBLNR = AMBLNR AND
              DMJAHR = AMJAHR
        JOIN MARA AS E
           ON EMATNR = AMATNR
        JOIN MAKT AS F
           ON FMATNR = AMATNR
   WHERE   A~MATNR IN P_MATNR
     AND   A~WERKS IN P_PLANT
     AND   A~KZBEW IN (' ','B')
     AND   E~MATKL IN P_MGRP
     AND   A~BWART NOT IN ('541','542','321','322','121')
     AND   A~KZVBR NOT IN ('A')
     AND   D~BUDAT LE P_DATE-HIGH.
LOOP AT OPBAL WHERE BWART EQ '544' AND LGORT EQ ''.
   TMP_OPBAL = OPBAL.
   APPEND TMP_OPBAL.
ENDLOOP.
DELETE OPBAL WHERE ( BWART EQ '309' AND DMBTR EQ 0 ).
DELETE OPBAL WHERE ( BWART NE '543' AND LGORT EQ '' ).
LOOP AT TMP_OPBAL.
   OPBAL = TMP_OPBAL.
   APPEND OPBAL.
ENDLOOP.
STOCKVAL = 0.
SORT OPBAL BY MATNR BATCH BUDAT.
LOOP AT OPBAL.
SELECT SINGLE LBLAB INTO MSLB-LBLAB FROM MSLB
                        WHERE MATNR = OPBAL-MATNR.
IF OPBAL-BUDAT LT P_DATE-LOW.
     IF OPBAL-SHKZG = 'H'.
        OPTOT = OPTOT - OPBAL-MENGE.
     ELSEIF OPBAL-SHKZG = 'S'.
        OPTOT = OPTOT + OPBAL-MENGE.
     ENDIF.
For the duration   II part *****************
ELSEIF OPBAL-BUDAT IN P_DATE.
     IF OPBAL-SHKZG = 'H'.
        ISSTOT      = ISSTOT + OPBAL-MENGE.
     ELSEIF OPBAL-SHKZG = 'S'.
        RECTOT = RECTOT + OPBAL-MENGE.
     ENDIF.
ENDIF.
AT END OF BATCH. " modified for chek
   READ TABLE OPBAL INDEX SY-TABIX.
   CLEAR BAL_NOREF. REFRESH BAL_NOREF.
   SELECT MATNR SHKZG SUM( DMBTR )
     INTO TABLE BAL_NOREF
     FROM BSIM
    WHERE BUDAT LT P_DATE-LOW AND
          MATNR EQ OPBAL-MATNR AND
          BWTAR EQ OPBAL-BATCH AND
          BWKEY IN P_PLANT     AND
          BLART IN ('RE','WE','WA','PR')
    GROUP BY MATNR SHKZG.
   LOOP AT BAL_NOREF.
      IF BAL_NOREF-SHKZG = 'H'.
         STOCKVAL = STOCKVAL - BAL_NOREF-DMBTR.
      ELSE.
         STOCKVAL = STOCKVAL + BAL_NOREF-DMBTR.
      ENDIF.
   ENDLOOP.
   CLEAR BAL_NOREF. REFRESH BAL_NOREF.
   SELECT MATNR SHKZG SUM( DMBTR )
     INTO TABLE BAL_NOREF
     FROM BSIM
    WHERE BUDAT IN P_DATE AND
          MATNR EQ OPBAL-MATNR AND
          BWTAR EQ OPBAL-BATCH AND
          BWKEY IN P_PLANT     AND
          BLART IN ('RE','WE','WA','PR')
    GROUP BY MATNR SHKZG.
   LOOP AT BAL_NOREF.
      IF BAL_NOREF-SHKZG = 'H'.
         ISS_STOCKVAL = ISS_STOCKVAL + BAL_NOREF-DMBTR.
      ELSE.
         REC_STOCKVAL = REC_STOCKVAL + BAL_NOREF-DMBTR.
      ENDIF.
   ENDLOOP.
   " MSLB-LBLAB (STOCK WITH SUBCONTRACTOR).
   CL_STKVAL       = STOCKVAL + REC_STOCKVAL - ISS_STOCKVAL.
   TOTALL = OPTOT + RECTOT - ISSTOT.
   IF OPTOT = '0'   AND RECTOT = '0' AND ISSTOT = '0'.
      FLG = 1.
   ENDIF.
   IF FLG = 1.
      CLEAR FLG.
   ELSE.
      SERNO = SERNO + 1.
      OPBAL2-SNO         = SERNO.
      OPBAL2-MATNR       = OPBAL-MATNR.
      OPBAL2-MAKTX       = OPBAL-MAKTX.
      OPBAL2-OP_BAL      = OPTOT.
      OPBAL2-REC         = RECTOT.
      OPBAL2-T_OPBAL_REC = OPTOT + RECTOT.
      OPBAL2-ISS         = ISSTOT.
      OPBAL2-T_ISS       = ISSTOT.
      OPBAL2-CL_BAL      = TOTALL.
      OPBAL2-BATCH       = OPBAL-BATCH.
      OPBAL2-SUBCON      = MSLB-LBLAB.
      OPBAL2-OP_STKVAL   = STOCKVAL.
      OPBAL2-ISS_STKVAL = ISS_STOCKVAL.
      OPBAL2-REC_STKVAL = REC_STOCKVAL.
      OPBAL2-CL_STKVAL   = CL_STKVAL.
      APPEND OPBAL2.
   ENDIF.
OPTOT = 0.
RECTOT = 0.
ISSTOT = 0.
STOCKVAL = 0.
ISS_STOCKVAL = 0.
REC_STOCKVAL = 0.
CL_STKVAL    = 0.
ENDAT.
ENDLOOP.
WA_SORT-SPOS = 1.
WA_SORT-FIELDNAME = 'MATNR'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM = REPID
      IT_FIELDCAT        = IT_FLDCAT
      IT_EVENTS          = IT_EVENTS
      IS_LAYOUT          = GS_LAYOUT
      IT_SORT            = IT_SORT
    TABLES
      T_OUTTAB           = OPBAL2.
FORM FILL_FLDCAT USING P_FLDCAT TYPE SLIS_T_FIELDCAT_ALV.
   PERFORM FILL_PARAM_FLDCAT USING 1 'SNo'          'SNO'       ' ' 'X'
   'OPBAL2' P_FLDCAT.
   PERFORM FILL_PARAM_FLDCAT USING 2 'Material No.' 'MATNR'     ' ' 'X'
   'OPBAL2' P_FLDCAT.
   PERFORM FILL_PARAM_FLDCAT USING 3 'Description' 'MAKTX'     ' ' ' '
   'OPBAL2' P_FLDCAT.
   PERFORM FILL_PARAM_FLDCAT USING 4 'Op.Bal'      'OP_BAL'     'X' ' '
   'OPBAL2' P_FLDCAT.
   PERFORM FILL_PARAM_FLDCAT USING 5 'Op.Stock Val' 'OP_STKVAL' 'X' ' '
   'OPBAL2' P_FLDCAT.
   PERFORM FILL_PARAM_FLDCAT USING 6 'Receipts'     'REC'       'X' ' '
   'OPBAL2' P_FLDCAT.
   PERFORM FILL_PARAM_FLDCAT USING 7 'Total'     'T_OPBAL_REC' 'X' ' '
   'OPBAL2' P_FLDCAT.
   PERFORM FILL_PARAM_FLDCAT USING 8 'Rect.Val.' 'REC_STKVAL'   'X' ' '
   'OPBAL2' P_FLDCAT.
   PERFORM FILL_PARAM_FLDCAT USING 9 'Issues'    'ISS'          'X' ' '
   'OPBAL2' P_FLDCAT.
   PERFORM FILL_PARAM_FLDCAT USING 10 'Iss. Val.' 'ISS_STKVAL'   'X' ' '
   'OPBAL2' P_FLDCAT.
   PERFORM FILL_PARAM_FLDCAT USING 11 'Cl. Bal.'     'CL_BAL'    'X' ' '
   'OPBAL2' P_FLDCAT.
   PERFORM FILL_PARAM_FLDCAT USING 12 'Cl.Stock Val' 'CL_STKVAL' 'X' ' '
   'OPBAL2' P_FLDCAT.
   PERFORM FILL_PARAM_FLDCAT USING 13 'BATCH '       'BATCH'     ' ' ' '
   'OPBAL2' P_FLDCAT.
ENDFORM.
FORM FILL_PARAM_FLDCAT USING VALUE(P_COL) VALUE(P_TEXT) VALUE(P_FLDNAME)
                       VALUE(P_DOSUM) VALUE(P_NOZERO) VALUE(P_TABNAME)
                       PP_FLDCAT TYPE SLIS_T_FIELDCAT_ALV.
   DATA : WA_FLDCAT TYPE SLIS_FIELDCAT_ALV.
   CLEAR WA_FLDCAT.
     WA_FLDCAT-COL_POS   = P_COL.
     WA_FLDCAT-SELTEXT_M = P_TEXT.
     WA_FLDCAT-FIELDNAME = P_FLDNAME.
     WA_FLDCAT-TABNAME   = P_TABNAME.
     WA_FLDCAT-DO_SUM    = P_DOSUM.
     WA_FLDCAT-NO_ZERO   = P_NOZERO.
   APPEND WA_FLDCAT TO PP_FLDCAT.
ENDFORM.
FORM FILL_HEADER USING P_IT_LIST_HEADER TYPE SLIS_T_LISTHEADER.
DATA: LS_LINE TYPE SLIS_LISTHEADER.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-INFO = TEXT-002.
APPEND LS_LINE TO P_IT_LIST_HEADER.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-INFO = DISPTEXT.
APPEND LS_LINE TO P_IT_LIST_HEADER.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-INFO = DISPTEXT2.
APPEND LS_LINE TO P_IT_LIST_HEADER.
ENDFORM.
FORM FILL_EVENTS USING P_IT_EVENTS TYPE SLIS_T_EVENT.
   DATA LS_EVENT TYPE SLIS_ALV_EVENT.
   MOVE 'TOP_OF_PAGE' TO LS_EVENT-FORM.
   MOVE 'TOP_OF_PAGE' TO LS_EVENT-NAME.
   APPEND LS_EVENT TO P_IT_EVENTS.
ENDFORM.
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
   EXPORTING
     IT_LIST_COMMENTARY       = IT_LIST_HEADER.
ENDFORM.
FORM FILL_LAYOUT USING P_GS_LAYOUT TYPE SLIS_LAYOUT_ALV.
   P_GS_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
   P_GS_LAYOUT-ZEBRA             = 'X'.
   P_GS_LAYOUT-FLEXIBLE_KEY      = 'X'.
ENDFORM.
FOR TESTING PURPOSE.
*SORT OPBAL BY BUDAT.
*CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     I_CALLBACK_PROGRAM = REPID
     IT_FIELDCAT        = IT_FLDCAT
     IT_EVENTS          = IT_EVENTS
   TABLES
     T_OUTTAB           = OPBAL.
*FORM FILL_FLDCAT USING P_FLDCAT TYPE SLIS_T_FIELDCAT_ALV.
PERFORM FILL_PARAM_FLDCAT USING 1 'MBLNR'        'MBLNR'
'OPBAL' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 2 'CREDIT/DEBIT' 'SHKZG'
'OPBAL' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 3 'MOV.TYP.'     'BWART'
'OPBAL' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 4 'ST.LOC.'     'LGORT'
'OPBAL' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 5 'STOCK VAL'    'DMBTR'
'OPBAL' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 6 'POS.DATE'     'BUDAT'
'OPBAL' P_FLDCAT.
*ENDFORM.

Opening and closing stock

Hi,
    We have a requirement in which a Customized report has to be developed. The report needs to display the opening stock , Total reciept, consumption and closing stock for supplier wise material.
   We came across a standard report MB5B in which all these values are available. However inorder to display these values in a customized report we require a standard function module. Please provide us a std function module that can solve the purpose.
If the std module is not available (i dnt come across one) kindly porvide an alternaitve for the same.
Regards,
      Milan Thaker

Hi,
Use Submit Statement to get the output data from MB5b.
Ex:
Create selection screen with required filelds and use like this
SUBMIT RM07MLBD with MATNR in r_matnr
                        with LGBST eq ''
                        with BWBST eq 'X'
                        with datum in datum
                        with bukrs in bukrs
                        with werks in werks
                        with lgort in lgort
                        with charg in charg
                        with bwtar in bwtar
                        with bwart in bwart
Rgds
Aeda

Opening and closing stock at storage location level

Dear all
I need a std report which will give the opening and closing stock at storage location level, Or should I go for dev. if yes please guide me.
Regards
Samuel

Hi,
check if you can use S_P00_07000139 report, select "Display stock movement by plant (with amount) and further select Sloc from layout.
Regards,
Vikas

Opening and closing stock balances

Hi
What report can i use to show the opening and closing stock balances of materials for the last 12 months.
Thanks
Vinesh

You can view the report in MMBE.
other than this you can try
MBEWH and MARDH
Also follow the link:
Re: op.& closing stock detail in MM
Thanks
Nisha

Open order qty,Delivered qty,issued qty, and closing stock---Tables

Gurus,
I need to Prepare a report which will show open order qty,Delivered qty,issued qty, and closing stock.
Please help me with table names where i can find .
Regards
venu gopal

Hi,
Try EKPO & EKBE tables..
Thx
Raju

Stock balances std report

How can i see the opening stock , reciepts , consumption , closing stock for a particular material between a particular period ??/
pls help

MB5B-Stock on Posting date
Is the best T code for the query,
Make sure you check(tick mark) the valuated stock check box else, you will get report on only plant stock and no special stocks will be considered
With Regards
MNarayanan

Stock Comprometido

Similar Messages

Maybe you are looking for