Stock control problem

i want some information a bout system analysis of stock control problem

1) A single database accessed by both the JSP Servlet
& Office PC Application (stock control).If you have 2 clients accessing the same data, a single database should be fine.
problem: which location is better for the database:
Server or networked PC?Access is a very basic DB so a networked PC is okay, it doesn't matter as ODBC lets you define where the database is your trying to connect to.
Should one use several servlets: eg: one for HTML
writing another for JDBC communication?Following the MVC2 concept, JSP's for front end views, servlets for processing business logic. Using Access you can create a basic class that can construct a Connection pool to your database just make sure you handle your transactions properly or else you'll end up with duplicate/corrupted data.
Cheers,
Anthony

Similar Messages

User Account Control Problems with Premier Elements 7 32 bit in 64 Bit Windows 7

I found User Account Control Problems in other forums but didn't see much in Premiere Elements, so I hope this helps others who may be having problems with 32 bit programs in a 64 bit computor. When I first got my 64 bit I didn't have problems.
Back in February I bought a Quad Core Desktop with Windows 7 64 bit. Haven't been on the forum for 7 months since I wrote in regarding importing video with the Pyro AV Link (Premiere Elements Tips and Tricks). I was having problems importing video which started after March 28 sometime, as that was the last time I didn't have a problem importing VHS. Took me a few months off and on to find out what worked.
I started uninstalling Windows updates and any programs I had installed back to that point in time. Checked after uninstalling each item. The capture screen would come up on a delayed basis but clicking on capture did nothing. Although no driver is required for IE1394 (so they say) I read where some people using the Legacy driver had fixed some problems, so I switched to the Legacy. Seemed to work great (for a few minutes).
I had even uninstalled and reinstalled PE7 but no difference. Finally I noticed a shield in the PE7 Desktop icon. Thats weird. Never had that before. Just decided to show up after I had done all of the stuff I mentioned. Turns out at some point in time since I've had the computor Windows 7 decided to flag my 32 bit program as misusing the 64 bit system. User Account Control. I never bothered too much with UAC and just clicked on the yes box wen it popped up asking if I wanted this or that to take control of my computor. I tried using the minimum setting for safety reasons, and then finally turned User Account Control off. Bingo! PE7 capture works again and still working.
While I am not recommending that people arbitrarily turn UAC off, this appeared to be my problem. I would recommed that they try turning it off before uninstallin a bunch of stuff. Having a restore point may or may not have been a fix for me. I think one of the Windows Updates caused the problem but I am not going to uninstall any more stuff at this point, I have not been back on the internet or installed any more updates in my desktop. I am going to use my laptop for internet and used the desktop for video.
I am guessing this could be a problem for any 64 bit systems trying to use 32 bit programs. IE: XP,Vista,Windows 7 64 bit. In Vista there is also Data Execution Prevention (DEP) which you can turn on or off, supposedly to prevent misuse of memory (as I understand it), but Win7 either doesn't have it or I haven't found where it's located.
Maybe this has been covered in the forum somewhere and I missed reading it. Hope I am not too confusing. Anyway, whatever feedback you guys have would be great.

John,
    Thanks for your answer, and I did check out the link you suggested. However, I have Windows 7 Home Premium as most people have I think, and the XP program was not available. I started with Vista and now have Win 7. I never could navigate around in XP anyway so am content to just leave User Account Control off.
    Interesting side note to turning UAC off is that my desktop seemed to be using more of the CPUs, where half of them were "Parked" as I wrote in also about 7 months ago when I 1st got my desktop. I am pleased to say that video processing seems to go quicker with UAC off. Have to observe things some more to confirm.
    I just thought if others were having problems after installing Windows Updates and leaving UAC off worked then they could possibly pinpoint a problem.

Out of Stock Control available in Turbo Lister

Hi Turbo Lister Users,
The option to use the Out of Stock Control feature in Turbo Lister is now available in the Beta version of the program.
When deciding whether or not to be a Beta user, please keep in mind that the beta versions aren't free of bugs, nor are they fully supported. Everyone is welcome to join the Beta Program, but experienced users will benefit most from using Turbo Lister beta software.
If you would like to opt into the Beta version, please follow these steps:
1. Open Turbo Lister
2. Click on Tools->Options
3. Expand Advanced Options
4. Click on Program Updates
5. Click the Join Beta Program button
Once you accept the terms, click on Tools->Check For Program Updates and install any updates found, if you are not automatically prompted to do so.
After the updates are installed, the program will need to be closed and re-opened.
To use the Out of Stock Control feature, you must do the following:
Turn on the feature in your My eBay. This can be accomplished by logging into your My eBay account, hovering over the Account tab and selecting Site Preferences. From there, expand the Sell Your Item form and listings section and check the box "Use Out of Stock Control option". Please note that this will activate the Out Of Stock Control option for all your Active Fixed Price Good Til Canceled Listings. The time it takes for Turbo Lister to recognize the change to your account can take a few minutes to a few hours.
Turbo Lister will then allow new Fixed Price GTC listings to be uploaded with a Qty of 0 as well as editing Active items in the Listing Activity section to set the Qty to 0.
For sellers that use File Exchange or the eBay API to set the Out Of Stock Control feature for specific listings, you only need to make sure the OutOfStockControl field is set to TRUE. (The only restriction for this option is that you will only be able to edit active items to depleat or increase the Quantity count. Creating new items would need to be done through File Exchange or the API).
For more information on the Out Of Stock Control feature, please review the following Help Page:
http://pages.ebay.com/help/sell/multiple.html#outofstock
Regards,
Draex
eBay Turbo Lister Support

Hi jerxa10,
The error you are receiving was corrected in a previous update of the program.
To correct this issue, we suggest that you reset the data within the Turbo Lister program by following the directions below:
-Open Turbo Lister
-Click on Tools->Install Complete Version Update
-Click Ok
Once the updates are installed, check to see if you are able to Edit Int'l items in bulk.
Also, please feel free to create a new post instead of posting to an informational eBay post related to new features of the program.
Regards,
Draex
eBay Turbo Lister Support

Control problem

I create a swf by Flash locally which point to a flv in a
remote flash media server, FLVplayback component included, it work
fine locally. Uploaded to FMS3, played without the control problem,
such as Play/Pause, seek bar.
Is it something I need to configure in FMS, or in Flash.
Please advice.
Thanks!

Between version 1.0 and 2.0 the API in the JBCL controls has
changed. We are actually moving away from JBCL completely (please
do send feedback if you have a comment on that) to a Swing and
Infobus standard based library of visual JavaBeans.
You will still be able to use the JBCL controls in JDeveloper
2.0. The best thing to do is to take your 1.x based application
AND the 1.x based JBCL.ZIP file into your new environment. This
way you will be able to continue to use these apps and
components. Taking the 1.x JBCL.ZIP file will make sure you have
the same version of the JBCL library that you were used to in
version 1.x.
Hope this help,
-Roel.
Hans Duijn (guest) wrote:
: Hi,
: I developed an applet in v1 that worked fine. I tried to
rebuild
: the applet in v2 but some problems occured. One, The
: ChoiceControl populated with the method
: 'ChoiceControl1.setItems' but in v2, this does not work till a
: explicitly called 'queryDataset.open'. Is the way to do it or
do
: I have to use special properties for the
dataset...and...second,
: I'm using an listControl that, in response to a selected item
in
: the ChoiceControl, changes frequently. No new list appears till
: I update the applet the hard way (hide it and bring it to
front)
: or click the mouse on the hidden items. 'listControl.repaint()'
: has no result. Am I doing something wrong? It worked in v1...
: and third...when can we expect the final version 2?
: Thanx.
null

I need either a stock control system or spread sheet.

Hi
I'm a mobile business using 3gs with OS4.
I Would like either a stock control system or a spread sheet that I can view and and update on both my Mac and my Iphone.
Could any of you wonderful people recommend anything please.
Thanks in advance
Michael

Hi
I'm a mobile business using 3gs with OS4.
I Would like either a stock control system or a spread sheet that I can view and and update on both my Mac and my Iphone.
Could any of you wonderful people recommend anything please.
Thanks in advance
Michael

MEGA 865 fan control problems after suspend/hibernate.

I'm seeing the CPU fan control problems, and it's REALLY ANNOYING, as it means I have to leave the machine on all the time. Specifically, after suspending or hibernating the machine, on wakeup the CPU fan goes to full speed and STAYS THERE until I reboot.
This is on a CLEAN INSTALL of Windows XP.
Is there going to be a fix for this from MSI soon? Because it's really ruining the experience of using the MEGA.

Hi guys,
I have builded a Mega 651 attaching a Celeron 2.4 Ghz.
I installed the cooler but I got really scared when I realised that the fan run for 2 secs and then stopped.
Is this normal?
If yes then i am assuming that the voltage of the fan is controlled by a thermal sensor, meaning that the fan goes on when the temperature reaches a certain limit.
Can the threshold temperature be controlled from bios so I can set it to minimum possible?
thanks in advance

My I phone 4 have volume control problem did anybody know how to fix

My I phone 4 have volume control problem did anybody know how to fix thankyou

Try force closing the Photos and Maps apps, then resetting your phone: double-tap the home button, locate Photos in the list at the bottom, tap and hold it until it wiggles, tap to close it. Now locate Maps and tap to close it as well, finish by tapping the home button. Now reset your phone: hold the on/off and home buttons until your see the Apple logo (ignoring the off slider that appears first), then release. See if that clears things up.

Topic : Alesis Master Control Problem (to previous post unanswered fixed)

Topic : Alesis Master Control Problem to the original post user: Garrud
Me:111984cz i have an answer to ur problem.i too had the same problem with cubase 5 ,Nuendo 4 and any of Steinberg softwares with the alesis master-control studio interface. i hope u run into this to learn my fix.
the problem is check ur midi input on your actual track.make sure it says to (master-control midi port) and not (all midi inputs).as for your device manager settings set to (master-control port) don't set your midi to all or master control port as it will interfere .now it will work perfect.this is for all who have the same problem as well.hope this helps many as i spend a lot of hours of trouble shooting.i almost thought there was something wrong with my mixer.have a great day guys!!
Original post:
I've installed the MasterControl driver as instructed and followed the logic set up instructions provided with the MC and all that seems to happen is the Controller acts as a midi keyboard playing different notes rather than the intended function.
e.g if i touch one of the faders it plays a high pitched note and if i move the fader it acts like the note is being pitched, like a pitch bend function on a keyboard.
Very strange...cannot figure out whats going on
PLEASE HELP I'M GOING INSANE
MacBook Pro Mac OS X (10.6.4)

I too had the same problem and resolved it.
However, I have had nothing but issues with the Alesis Mastercontrol since it arrived last week. I purchased mine second-hand as a replacement to a Fire-Wire / Analogue mixer made by Mackie (Onyx 1220). A fantastic amp, but not a control surface.
I decided I wanted an all rounder, plus something I could place in-front of my iMac so I could work on the fly.
So...
1) Alesis Mastercontrol
2) 1 x Rode microphone in Ch1
3) 1 x Rode microphone in Ch2
4) Peavey guitar in Ch3
I use Logic Studio Pro 8.
I finally figured out how to get the Alesis to behave and interact with Logic. So far so good!
I then ran into a series of issues that are frustrating me.
I cannot get the microphones to mute properly (I would also complain about the poorly position gain dials at the back of the unit for the microphones. So poor indeed that I have purchased an Art mic preamp to slap into the back (not arrived yet) and by-pass the rear controls).
I also cannot get my semi-acoustic Peavey to record at all. I can hear it through the control desk, but it is much lower than expected and I am getting nothing when I try to record). In record mode the pair of mics record and I can't get the 3rd channel to operate, although it looks like it's functioning on the screen. I try MUTE / SOLO and selecting the correct channel, but nothing!
All I can do is record myself playing guitar through the mics I cannot switch off.
Strange machine! Almost wishing I'd not sold my Mackie Onyx 1220 so swiftly.

Another volume control problem after installing new software

I'm having a different volume control problem than the previous poster.
When I turn my ipod touch on, the volume control stays on the screen. I can't do anything to get rid of it. When I go into settings/sounds, the control goes away on the screen, but it will not let me turn the volume up. When I try to listen to music through my headphones, I can turn the volume up but then it automatically turns itself down. The same thing happens when I try to turn the volume up from the side control. It worked fine this morning before I installed the new software and now it's acting buggy. Any ideas on how to fix this?

Friend should do an update again your team blackberry.
Remember to make a backup with Desktop Manager and the BlackBerry protect
Having BBSack to apply wipe, factory reset wipe more, following which you do a software update via Loader.
Software For BlackBerry® Torch™ 9800 smartphone
BlackBerry Handheld Software v6.0.0.3170 (Multilanguage)
Package Version: 6.0.0.3170
Consisting of:
Applications: 6.0.0.756
Software Platform: 6.6.0.252
File name: 9800M_PBr6.0.0_rel3170_PL6.6.0.252_A6.0.0.756_Vodafone_Spain.exe
File size: 171.22MB
https://swdownloads.blackberry.com/Downloads/entry.do?code=15D4E891D784977CACBFCBB00C48F133
Regards.
Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
Accept as Solution to ** Comments **
@gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

Simulate signal controlling problem

Hi
I have this signal controlling problem. In 10,20,30,40,50 the sine wave stops. How can i avoid that?
Attachments:
PWM.vi ‏251 KB

I'm more concerned about the Wait inside of a Timed Loop. That is totally unnecessary. Change the timed loop into a normal while loop.
As far as the Simulate Signal, I have no clue. The settings look find as far as I can tell.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

QM/MM - STOCK TYPE PROBLEM - Pharmaceutical Industry

In January 2005 we changed the material master 220072 to deactivate inspection set up for inspection type 01-05-08 and to change the QM control Key from Z0002 to 0001.
The characteristic BC_USAGE_USAGE_DECISION of the relevant material batch class (ZBC_220072) has been updated accordingly to RELEASED.
This workaround allows inbounding the material directly into unrestricted.
Since the Scheduling Agreement/purchase master data wasn't updated, the stock of the first inbound after this change just received was posted in S (blocked stock).
WM operator did the reverse of good issue.
Purchasing data maintainer updated the QM Control KEY to 0001. (Purchase Document IP00000012).
WM operator inbound the batch again but the batch has been posted in S too.
Scheduling Agreement was created on 30-Jul-2003; with relevant line item added on 25-Aug-2003 - it looks as though it is not reading the updated material master data.
Is there a solution? Which data must be changed to resolve the problem?

Question not answered; workaround accepted by business.

Hey Admin(Karl) Still have brightness control problem w/dual ACDs on G5

Can someone on the administrator or tech 3 or 4 guru level from Apple Please tell me what I need to do to access the brightness controls of my two previous generation "clear with/ white frame" apple 23" cinema displays ? I posted here two weeks ago - had no responses.
Went to AppleCare via phone for an hour - Indian person trying to help said it is available in the monitors prefs tabs/and monitor pull down menu on the menu bar next to the time ( nothing but resolution/arrangement/color profile there ).
I have since re-installed 10.4 from the original disks AND upgraded to 10.4.3 - Hoping that something would change. Nothing did.
Nothing shows up on screen when pushing the brightness buttonon either monitor, OR when I go to the monitors control panel - no brightness slider or tab on top.
It is driving me crazy to have to review my work ( digital photography ) on my old G4 system to be able to judge the proper density of the images.
I can profile the pair with a Spyder2 calibrater, and load the profiles fine, but again brightness is the issue, not the color. One of the displays is about 30% brighter than the other, and there in lies my problem.
Since the same difference in the screens is the same across various applications ( Final Cut Pro / Adobe PS / DVD player ), can I assume that this is a system issue software issue ?
Am I the only one having this problem ? Or is there just a glitch that no one has managed to tackle and fix even this far into Tiger ?
Please someone reply and save my sanity !
Mel
NEW Powermac G5 2.3 w/ dual port stock video card Mac OS X (10.4)

Hi Mel,
Sorry to hear that you are having problems.
I feel I have to point out that most of the 3 or 4 level Gurus don't actually work for Mac. We tend to obtain our knowledge from our own experiences plus sharing other peoples' experiences in this forum.
The reason I haven't responded to your issue myself is because I have no first hand experience of your problem, and I haven't been able to find anybody else who has had this problem and has been able to fix it. I'm always reluctant to respond unless I feel I have some information that will really help (or, at least, not possibly make things worse).
Anecdotally, this issue appears to have surfaced with the release of Tiger, so it may well be a software issue.
I don't know how old your G5 is - will it function with Panther? If that is the case, then installing Panther on another drive or partition (i.e. keep Tiger for now), and then booting up with Panther may give you an interim solution while the issue (hopefully) gets resolved in Tiger.
The fact that the brightness options are not available probably means that the drivers bundled with the Tiger installation for the graphics card that is in your G5 do not support the displays you are using properly. I believe that the stock video card you are using is an ATI card (you might want to check this via system profiler). At this stage, it would certainly be worth your while to contact ATI support and see whether they have drivers available that will assist you. This link may help get you started:
http://www.ati.com/products/mac.html
I acknowledge that I haven't really given you a solution, and I apologize for that. Hopefully, what I have given you will give your quest some direction.
Please let us know how you fared. All the best.
Cheers!
Karl

Creation of Control Problem: List of application EJB is empty

Hello ! Could anybody assist me to solve this problem ?
When I try to create EJB Control I can't receive list of application EJB. I'm receiving message no resources found in corresponding dialog for ejb's list. I can't understand what happened with application because some days before I created ejb controls without any problems.

Hi
Which version of workshop are you on? Version: 9.2.1
Also do you have ejb projects in the application that
contains EJB's?I have ejb project with ejbs, list with ejb was displayed before
For the application EJB list, we are looking through
all of the EJB projects, but only look at those
defined as EJBGen beans. We don't look at any
standard EJBs, whose metadata is defined in
descriptors rather than annotations. This is an
pending enhancement request.Where EJBGen beans setting must be set ? May be in some internal workshop setting file ? ;-) :-E
>
Do you see any error in the error log view when you
access the EJB list? (Windows -> Show View -> Other
-> PDE Runtime -> Error Log)No any error messages appear when I'm trying to access the EJB list
>
Vimala-Version: 9.2.1
I have ejb project

Parental control problem printing to a shared printer

Hello chaps,
Here's an annoying one.
Two Macs, both running OS X 10.6.3. They are both on a wireless LAN, once has a Canon Pixma 4200 printer directly connected via USB with Printer Sharing turned on - Everyone allowed to print.
The problem: When my wife prints to the shared printer from her machine it works fine. When my kids try to print from their Parental Control-controlled account it doesn't.
The job comes up in the print queue but with On hold (authentication required) next to it.
The account has the box ticked to allow administration of Printers.
I can find no place to Authenticate, to get the job to print, even via the CUPS Web interface (that I'm not an expert in).
All clues gratefully received.
Anyone have anu clues
Message was edited by: Chris Noble

Hello chaps,
Here's an annoying one.
Two Macs, both running OS X 10.6.3. They are both on a wireless LAN, once has a Canon Pixma 4200 printer directly connected via USB with Printer Sharing turned on - Everyone allowed to print.
The problem: When my wife prints to the shared printer from her machine it works fine. When my kids try to print from their Parental Control-controlled account it doesn't.
The job comes up in the print queue but with On hold (authentication required) next to it.
The account has the box ticked to allow administration of Printers.
I can find no place to Authenticate, to get the job to print, even via the CUPS Web interface (that I'm not an expert in).
All clues gratefully received.
Anyone have anu clues
Message was edited by: Chris Noble

DV Camera Analog Passthru control problems

Hi,
I'm fairly new to Macs but have managed to convert all my Mini DV vids to DVD using iMovie/iDVD which I'm really happy with. However, now I'm trying to get all my old Hi8 tapes done and I'm having a few problems.
I have a Sony PC101 Mini DV camera which lets you have an AV passthru from my old analog camera through the DV camera and via the firewire into the Mac. The problem is though that when I click import in iMovie it tries to play the tape in the DV camera but I need the footage from the analog camera.
I did this on my XP PC once where I told the package to not control the DV camera so I could play the analog camera and just say import and it worked.
I can't see a way of doing this in iMovie HD so any ideas? If i take the tape out of the DV camera it won't let me import as it says it needs a tape.
Help!!!

Some analog to DV converters don't work in iMovie HD 5.0.2 like they do in iMovie 4.0.1. Sad but true.
1. For example, my Sony TRV320 can convert analog video to DV in passthrough mode in iMovie 4.0.1, but not in iMovie HD 5.0.2. Reportedly neither Sony DVMC-DA1 converter's, or Sony DCR-PC110, Sony DCR-HC30E, Sony TRV-340E, Canon ZR80, Canon ZR200, Canon MV630i or Panasonic NV EX3 camcorders' analog to DV passthrough work in iMovie HD 5.0.2 like it does in iMovie 4.0.1.
2. It is also not possible to record live DV with no tape in the camcorder (i.e. the camcorder in Rec mode, so that what goes in the camcorder's lens, imports in real-time to iMovie) from a camcorder (Sony TRV320, for example) to iMovie HD 5.0.2 because iMovie complains "Camera No Tape". In iMovie 4.0.1 and BTV Pro this works OK with no tape in the camcorder.
Analog-to-DV workaround #1: Import using $20/40 BTV/BTV Pro or iMovie 4.0.1. Then import it to iMovie HD or, to save time and HD space, drop the .dv file in the Media-folder.
Analog-to-DV workaround #2: (This worked with my Sony TRV320 with iMovie HD 5.0.1 but not anymore with v5.0.2). Put a tape in the camcorder and press the camcorder's PLAY-button to play the tape in VTR mode (usually the tape must be OUT when doing analog-DV conversion!), then in iMovie hit the Import-button (so iMovie starts to import from the tape), then press the camcorder's STOP-button. iMovie should then continue importing from the analog source as usual.
http://www.sjoki.uta.fi/~shmhav/iMovieHD_bugs.html#analogDV

Stock control problem

Similar Messages

Maybe you are looking for