Stock Count MI01 for new,refurbish and second tyre - using same material no

Hi Everyone
Please assist me how do you differentiate between the new, refirbish and second tyre when you create a new count document - MI01
Susan

hii
U people will be using same material code for the all the three different categories ??
1. New tyre, 2. Refurnish 3. second..
Because material code is very much inportant in Physical inventory.
So can u check the material codes for the same .
U should use different ruight , if not u have mantion / maintain some text fo the same while doing physical inventory count.
Revert now any clarification
Thanks
SAP-MM

Similar Messages

  • We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is: Cannot send mail. The user name or password for iCloud is incorrect.

    We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is:>> Cannot send mail. The user name or password for iCloud is incorrect.

    About ~20 hours later, this ended up solving itself. We can send email using the '.icloud' email from both the iPad and iPhone.  Advise would be 'wait' before you start seeking alteranatives like yahoo, hotmail, etc.  This definitely is a convenient way to keep all your 'cloud' information in a centralized place, including the common email...

  • I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Element

    I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Elements, I keep getting the message "Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. I have tried reinstalling Camera Raw many times, and have tried to open many different raw files in Elements, and still get the same error message. Please help.

    How did you try to install ACR 8.8.  The only way I know of that works with Elements is to use the Updates Choice on the Help menu.
    There are two charts supplied by Adobe that explain your RAW dilemma.  This one tells you what your camera needs:  http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html   This one tells you what version of software you need:  http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    In your case, the Nikon D810 needs Adobe Camera Raw (ACR) 8.6 or Lightroom 5.6.  (Congratulations on buying a new camera!)
    To get to that level with Photoshop Elements, you will need to replace your Photoshop Elements 12 with version 13.   Adobe caps ACR updates on version 12 at 8.5.
    The most convenient way to get around it without spending any money is to use the FREE from Adobe DNG Converter.  Download and install it from here for FREE:  http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5855&fileID=5890  Once it is installed you can convert your D810 raw files to an Adobe RAW version with the .DNG file extension that most, if not all, versions of the various Adobe software programs can use.  That includes old versions of Photoshop, Elements and Lightroom.  DNG converter can be used as the tool to move your files from your memory card to your computer, is efficient, will convert in batches and is completely lossless.  There is no risk of any image quality degradation or RAW functionality.

  • I got a new computer and haven't used iTunes in years. I have an iPod and want to put my music from it onto iTunes on the new computer. I don't remember my old iTunes account info but i have a new apple ID for my iphone and ipad.

    I got a new computer and haven't used iTunes in years. I have an iPod and want to put my music from it onto iTunes on the new computer. I don't remember my old iTunes account info but i have a new apple ID for my iphone and ipad. Is there a way to transfer songs from my iPod (old iPod video) onto the new iTunes on my new computer and use my new apple ID to sign into iTunes?

    I got a new computer and haven't used iTunes in years. I have an iPod and want to put my music from it onto iTunes on the new computer. I don't remember my old iTunes account info but i have a new apple ID for my iphone and ipad. Is there a way to transfer songs from my iPod (old iPod video) onto the new iTunes on my new computer and use my new apple ID to sign into iTunes?

  • I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

    I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

    Click here for options.
    (58961)

  • I have a new iMac and want to use my HP 7300 All in One and to use the "Fax"feature I need a phone port on computer and of course, this computer does not have one.  Are there any aftermarket devices for USB to phone that would work in this case?

    I have a new iMac and want to use my HP 7300 "All in One and cannot use the fax feature because there is no phone port is there a solution for this?BACellli

    You don't need a phone port on the iMac. The HP 7300 DeskJet Pro has an internal modem, you connect the printer's modem connection directly to your phone line. Please re-read the install directions that came with the printer.

  • How do I turn on my wireless keyboard and make it 'discoverable'?  I got a message that the batteries were low, so I changed them for new ones and now the keyboard doesn't work.

    I got a message saying that the batteries were low, so changed them for new ones and now the keyboard cannot be 'found'. There seems to be no way to turn it on and make it 'discoverable' to the system.  At the moment I'm typing this on a spare keyboard plugged into the  back of my mac via a USB.  Please help!

    Have you checked to make sure the batteries are inserted the correct way? Have you tried to turn it on by pushing the right upper (round) edge of the keyboard - if you do that, do you see a tiny little green light? Since you have a wired keyboard, can you get to the Bluetooth setup/preference pane so you can manually try to sync the keyboard?
    PS - posting duplicate posts is not helpful - it makes things too confusing, so I've asked the hosts to remove your other (identical) post.

  • HT4972 I just got a new iMac and want to use it for iTunes.  when i connect my iPhone how do i transfer everything in my iPhone to this new computer?

    I just got a new iMac and want to use it for iTunes.  when i connect my iPhone how do i transfer everything in my iPhone to this new computer?

    If you do not have access to your old PC/Laptop and therefore cannot transfer your iTunes library, this document is very useful https://discussions.apple.com/docs/DOC-3141

  • How do I get an adapter for a laptop and iPhone to use them in New Zealand and Australia?

    How do I gwet an adapter for a laptop and Iphone to use in New Zealand and Australia?

    For the iPhone the regular power adapter will work worldwide. All you need is a plug aapter. 99% of all laptop power packs are also universal. (All Apple laptops certainly are). Look at the label. If it says 120-240 volts, 50/60 Hz it will work anywhere in the world. Again, all you need is a converter for the prongs on the plug.

  • Since updating to Mavericks, Mail doesn't work properly.  It just stops working (no error messages--it just won't check for new mail) and I must shut it down and reopen it to get it working again.  Any suggestions?

    Since updating to Mavericks, Mail doesn't work properly.  It just stops working (no error messages--it just won't check for new mail) and I must shut it down and reopen it to get it working again.  Any suggestions?

    Try to force quit the mail app
    Double tap the home button. When you see the app previews on the screen scroll sideways if needed to get the preview in question on the screen. Flick that preview up and off the screen to close the app. Single tap the home button or home screen preview to exit the mode.
    Failing that, go into the settings, mail, contacts and calendars and remove your account info then put it back in and see if that works

  • Create Separate Views for New,Edit and Display forms in Infopath

    Hi,
    I need to create a separate views for New, Edit and Display forms in infopath.
    For ex : I need a Submit Button on Display form and not in New/Edit forms.
    I tried, but i amnot able to get the changes.
    Regards, Shreyas R S

    I just validated my approach in a 2013 farm, this is precisely how it's done!
    Step 1) List > Display Form
    Step 2) Change the View within the Web Part Properties. In your screenshot it looks like you simply went to View Item on the single item, which is not the direction I gave =P.
    **Assuming you've already created the multiple views within InfoPath, this allows you to set them up as distinct defaults for New, Edit and Display, let's make that clear. If you are not even to the point of having separate views, that is just in InfoPath,
    Page Design tab, far left, New View button

  • I've bought headphones for iphone 4g and want to use them in my ipod 4g. When i want to use pilot it don"t work. What should i do ?

    I've bought headphones for iphone 4g and want to use them in my ipod 4g. When i want to use pilot it don"t work. What should i do ?

    If you have an Apple store nearby you can make an appointment at their Genius Bar.
    Apple Retail Store - Genius Bar
    You can also try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    iOS: How to back up your data and set up as a new device

  • How to Upload the Materials for one Plant and then copy the same to all oth

    Hi All,
       I am using Material Types NonStock, Service, Spare Parts and Trading.
       How to Upload the Materials for one Plant and then copy the same to all other plants.
    can anybody give response for this requirement.
    Regards...
    <b></b>

    Hi,
    Using MM01 Only we can upload Plant Details.
    If you want to extend to other plant also, Use MM01 and select Plant view and give new plant details.
    If you want to copy from one plant to another plant after selecting Plant view , next screen you can select From Plant and To Plant Details.
    Reward Points If it helps you.
    Regards,
    Murali K

  • [svn] 1433: adding 'console' security constraint to MBeanServerGateway remote object for MBean tests and ds-console , used when running on Websphere with administrative security enabled.

    Revision: 1433
    Author: [email protected]
    Date: 2008-04-28 13:13:12 -0700 (Mon, 28 Apr 2008)
    Log Message:
    adding 'console' security constraint to MBeanServerGateway remote object for MBean tests and ds-console, used when running on Websphere with administrative security enabled. Should call setCredentials("bob","bob1") to use this RO.
    Modified Paths:
    blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/flex/remoting-config.mods.xml
    blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.xml

    Hi,
    It seems that you were using Hyper-V Remote Management Configuration Utility from the link
    http://code.msdn.microsoft.com/HVRemote, if so, you can refer to the following link.
    Configure Hyper-V Remote Management in seconds
    http://blogs.technet.com/jhoward/archive/2008/11/14/configure-hyper-v-remote-management-in-seconds.aspx
    By the way, if you want to perform the further research about Hyper-V Remote Management Configuration Utility, it is recommend that you to get further
    support in the corresponding community so that you can get the most qualified pool of respondents. Thanks for your understanding.
    For your convenience, I have list the related link as followed.
    Discussions for Hyper-V Remote Management Configuration Utility
    http://code.msdn.microsoft.com/HVRemote/Thread/List.aspx
    Best Regards,
    Vincent Hu

  • I have new iPad and iPhone4 ,both the same carrier aim from Egypt , I have hotspot in my iPhone but I don't have in iPad , I want to know why?

    I have new iPad and iPhone4 ,both the same carrier aim from Egypt , I have hotspot in my iPhone but I don't have in iPad , I want to know why?

    Have you subscribed to a tethering plan for your iPad?

Maybe you are looking for

  • Why does iTunes always sync old apps back to my phone when restoring from back-up?

    I can't seem to stop this happening - I delete apps frequently from my phone as I find I have no use for them. I regularly sync my phone to iTunes and I expected this to mean that old apps would be deleted from there as well, the same as contacts and

  • PAI is not triggered after I choose value in F4

    Hello experts, I fight with the following problem: On my screen I use input field (ucf_s_coi_afd03_ct-xrproc_param) and I coded the F4 help for it manually PROCESS ON VALUE-REQUEST.   FIELD ucf_s_coi_afd03_ct-xrproc_param       MODULE req_xrproc_para

  • Problem with String variable

    I am new to Java Programming. I have a line of code that works and does what is supposed to. faceData.getProfile("Lisa").removeFriend("Curtis"); If I assign the strings to variables such as- String name = "Lisa"; String fName = "Curtis"; and then plu

  • Dependent LOV throws Exception

    Hello, I want to implement a dependent LOV: I have a LOV Competency and a dependent Proficiency LOV. e.g. in Competence LOV I search for Oracle DBA then I only want the Proficiency level concering to Oracle DBA e.g. certified, not certified. The lead

  • Windows itunes 10.7 update break itunes (windows server 2008 x64) older version of itunes works fine

    Hi! I just update itunes 10.7 to my (windows server 2008 R2) PC. After update it stops to work... Itunes just closes when tryning to start. I did try repairn installation but status is same. Old version was workin fine, how i can fix this?