Stock data of serial number not suitable for movement
We have a situation where we have had to put some serialized parts on a rework production order. When we are trying to bring them back into stock, we're getting a message that says "Stock data of serial number not suitable for movement." I'm guessing that this is because this serial number had existed in stock before (since this is a rework of an existing material/serial number.) We need to receive this back into stock using this same serial number. How is that possible?
Thanks in advance for your help.
Sybil
Dear,
Please refer these threads,
Re: Removing Serial number Profile
IQ02 Shows Blocked Stock for Serial Number
Hope it will help you.
Regards,
R.Brahmankar
Similar Messages
-
Serial Number not suitable for movement when doing goods issue or sto ?
Dear all ,
I have a issue , when doing sto or goods issue ,
i have a material code serial number profile is off physical quantity is laying 20 and my requirement is active the serial no
and assign to serial number for the material ,
Tcode is iq01 put the material , serial number and category after save when i am doing ma1a putting material ,quantity
and that serial number click on save , geting error like
Stock data of serial number 1234 not suitable for movement
when i am checking iq02 serial number is showing but checking in MMbe there is not showing
Regards
Shivhello,
to activate the serial numbers you first have to clear all the stock for this material (MVT 562 / 502 or other)
Than activate the serial in the material muster.
in your situation (if i understood correctly) what you need is:
1. disable the serial numbers for the material (move them to another material)
2. deactivate the serial number in the material master
3. get rid of all the stack - post it with 562 or 502
4. activate serial numbers
5. post the material back to stock - 561 / 501 - than the system will require a serial number for each unit -
Serial Number not suitable for movment
Dear Friends,
while doing PGI through movement type-601 we are getting error message "Stock Data for serial number xxxxx not suitable for movement"
please suggest.
thanksHi,
While doing PGI give the serial number which is assigned to your exsisting in stock.
Go To MMBE
and see which valuation stock and wich storage location you want to issue and righ click and check the equipment/serial number in system and give the appropriate serial number available in stock -
MIGO - GR - Others -- Serial Number Not saved for Movement Type : 561
Hello,
I am trying to post good receipt-other ( for movement type 561) using MIGO transaction. I have specified all required data.
Also depending on the item qty., I entered serial number in serial number tab.
Its creating document successfully. However if I try to display same document using MIGO, serial number is missing.
I tried to debug the code and I realized its not saving serial number itself.
For other movement type its creating document with correct serial number.
If I repeat same process using same data using transaction MB11 its posting successfully and I can see serial number using MIGO transaction as well.
One more thing which I've noticed is when I post document using MIGO, Account assignment details are missing. However with MB11 I can see account assignment data too.
Would be really appreciated if someone can help me on this. I dont know If I'm missing any configuration part here.
Thanks & Rgds,
NileshAny help Experts?
Nilesh -
IO231: Stock data of serial number &1 not suitable for movement
Hi experts,
I have unique problem with serialized material posting.We are having serialized managed materials which are posted to quality inspection stock.The user was able to post partial quantity to unrestricted after usage decision but when tried to post remainig quantity it is giving error 'IO231: Stock data of serial number &1 not suitable for movement".I checked serial number history in iq02 & it shows that same serial numbers were used for some order in the past which is already delivered.I am not able to understand how it allowed to post same serial numbers again for the same material and if it is normal why it is giving above error when we try to post remaining quantity?
I tried by changing serial profile in the material master with all optional fields and without stock check and equipment and try to post but its not working.
I want to somehow post material to unrestricted use from quality inspection with or without serial numbers.
I am working on 4.7 system
Can u guys help me.
Thanks & Regards,
Sachin.Hi,
Please check this SAP Note: 213861, 1229108
From Note 213861
Release 4.0A or 4.0B:
Table T156S
Maintain the data using Transaction SM31.Flag for transport using Transaction SE16.
All entries for movement types 645 and 647 should be filled with '****' in field T156S-VRGNG.
Release 4.5A or 4.5B:
Table T156S
Maintain the data using Transaction SM31.Flag for transport using Transaction SE16.
All entries for movement types 645, 647 and 675 to 678 should be filled with '****' in field T156S-VRGNG.
Release 4.6A to 4.6C:
Table T156SY
Maintain the data using Transaction SM30 using view V_T156SY.If necessary, manually flag for transport in this transaction.
All entries for posting string references 645 or 647 should be filled in field T156SY-VRGNG_S or T156SY-VRGNG_H with '****'.
For Note 1229108
A correction instructions has given Please take help from BASIS Team....
This will solve the Problem...
Regards
GK.
Edited by: Gnana Kumar on Nov 3, 2010 7:16 AM -
Stock data of serial number 90645 not suitable for Movement.
HI Friends,
We are having issue while doing return delivery for a service/Repair order, the serial number related error messages are coming.
the error messages are
1. Stock data of serial number 90645 not suitable for Movement.
2 . Serial number can not be used here.
3 termination of gods issue posting for delivery note 855222.
The following points explain the scenario..
1. The Previous and next documents are through with the post Goods receipt for the same material with different serial numbers.
2. The movemnt is 653 E
3 Client placing one service/repair order and creating return delivry against this order and assign serial number and trying to post Goods receipt.
4 The serial number profile is having Exist/ indicator for SDRE return delivery serial usage is 'optional' and Equipe' with equirement'
RobertHi Anybody come across this requirement.
-
Serial Number not recognized for Snow Leopard Up to Date
Not sure where to post this question as it pertains to Snow Leopard....
Just bought a new imac but its Serial Number is not being recognized on the Snow Leopard Up to Date page. The serial number is recognized elsewhere, such as the warranty check page.
Suggestions? ThanksThat's a shame. But I suspect it's temporary. I think you get 90 days from the date of purchase to get the free upgrade. I assume that Apple will be better able to deal with this issue as we get closer to the release date.
Meanwhile, we are not Apple employee's and can not speak for the company or guess what the problem is. Apple does have a direct Feedback site that they do read and respond to:
http://www.apple.com/feedback/
For those that may have missed it or haven't tried yet, here's the sign-up page where you are supposed to be able to register online. You can also download the form and send it in the mail.
http://www.apple.com/macosx/uptodate/ -
Stock information in serial number not updated
Dear All,
After doing GR Stock Information(ie, Stock type, plant, storage location) of some serial numbers not updated. Status of these serial numbers is ESTO. Stock of these serial numbers updated in warehouse. Still stock information not updated in serial number. Due to this not able to issue this stock in 601 movement. Also not able to reverse this serial number using 102 movement type in MIGO. Error while doing 102 movement type is Deficit of PU IR quantity XXXX NOS. Pls help
Thanks In advance
ZionDear All,
No need for reversal. Corrupted serial numbers have been repaired by program RISTEQ07.
Problem Solved
Rgds
Zion -
Design Standard CS 5.5 serial number not working for Photoshop
I am trying to install the Design Standard CS 5.5 but am having trouble with Photoshop. All of the programs installed and open correctly except for Photoshop. When I try to launch it, the Adobe Application Manager comes up saying that the serial number is "not valid for this product." The serial seemed to work during the install and both InDesign and Illustrator launch without any problems. I have also tryed uninstalling and then reinstalling Photoshop, but I still have the same problem. I am running Mac OS X 10.6.8.
Are you definitely installing Design Premium CS5, not a similar sounding Creative Suite? And not CS5.5?
-
I'm switching to a new laptop, and I want to bring my Acrobat 9 STD with me. Deactivated it on the old laptop, went to the download page for Acrobat 9 and downloaded it, got to the part in the installation where I entered my serial number, and the installation wizard said it was invalid. That's when I noticed the download was for Acrobat 9 PRO, not STD. I used the support chat and explained it to the support person, and he gave me a link for the 9 STD download. Unfortunately, it was the same page. I downloaded it again. Still 9 PRO. Anyone else have any ideas where they're hiding the Acrobat 9 STD download?
Finding the file all depends on how you did the install and if you downloaded the install file. If the install file was downloaded to the TEMP folder, there is a slight chance it may still be there (should be in Windows>TEMP, not sure on MAC). It may have a name similar to the Pro download of AcroPro90_efg.exe. The Pro would be change to Std and I am not sure what the efg stands for. I would search for AcroStd9*.exe. There seems to be a download for AA 9 std available at http://prodesigntools.com/adobe-acrobat-x-10-pro-reader-suite-direct-download-links-ddl.ht ml. I have no idea if that works. I had found one place where a staff member said he is working on getting links up for all the older versions, not just the trials (that are Pro). I simply searched on Google for Acrobat 9 Standard files. I can't find the message by the staff, but there is one in the last week or two as I recall where a staff member was providing links for folks on an individual basis.
-
Serial Number not working for a re-install
I am still trying on this one... I needed to replace my hard Drive. I have been trying to re-install Keynote on my new hard drive but the Installer window won't recognize the Serial Number. It will allow me to open old Keynotes but not save any edits. Any help is appreciated. Thanks!
Error "The serial number is not valid for this product" | Creative Suite
-
Serial number not working for cs3
I bought an imac from apple in 2008 and I also purchased CS3 Design Premium. I have all the original cd's and it will not accept the serial number to install or re install.
HELPError "The serial number is not valid for this product" | Creative Suite
-
Cs5 serial number not allowed for cs6 upgrade?
hello
I am trying to install CS6 Design Premium (via CD) and have CS5. However I am denied installation because my CS5 serial number is not allowed (it appears I must have CS5.5). All phone lines are engaged. As well as frustrating, this would seem a very poor 'stealth' trick. I have countless registered Adobe copies going back years and saw no warning re this possibility prior to purchase. Is installing from CS5 impossible?phew! I took your advice and after many dropped phone connections, I was able to speak to Prashant (Adobe service rep in India) who was able to take create a (temporary) support number for me to type in to the registration dialogue via the challenge code procedure. This appeared to bypass the registration dropdown issue and so allowed me to register... at last!
In retrospect I am very grateful for your help and my good fortune in being able to speak to Prashant who was able to fix the problem over the phone. However I suspect this problem may occur to others and the solution seems far from easy when long phone queues and dropped connections add to the tortuous minefield of what is simply meant to be a registration process!
best regards in all events
Simon -
I am attempting to RE install PSElements 11 on a computer where it WAS last week but had a hard drive crash. The message is wrong and the serial number is correct. URGENT as I am at the apple store trying to get help from apple people, and they DON'T want me to install a new version of Yosemite as it will make computer slower...
Error "The serial number is not valid for this product" | Creative Suite
http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html -
Serial number not valid for LR5
hello all I am Brazilian and my computer is in Portuguese bought the LR 5 here in japan and downloaded the LR in the adobe site try turning the key to activate a message appears saying that the number is invalid which will
1. Make sure you have ADMIN privileges.
2. Manually enter the serial number. Many people have an same issue (cut and paste) and there ends up being a leading or trailing space.
3. Use zeros (no "o"s). Use ones (no "i"s)
4. Make sure the serial number is for the version you actually installed, not an older version.
Maybe you are looking for
-
IChat No Longer Works With Expired MobileMe Trial Accounts?
In the past, you could use an expired .Mac (now MobileMe) trial account's username, to log into and use iChat. But I believe now that this no longer works. Apple must've changed the rules. Can anyone else confirm this? I haven't been able to use iCha
-
Paypal code not working in iWeb?
I designed a website in Dreamweaver on my Windows PC. On it I was selling a book and payment could be made using Paypal so I got the code from the Paypal website, inserted into the DW website and it has been working great for years now. I have today,
-
Connecting NI-7358 and UMI-7774 to a sinusoidal commutatio​n driver
Hello, I'm using NI-7358 PCI motion control card and UMI-7774 to drive a brushless servo motor driver Advanced Motion Controls S16A8 External Sine Commutation driver. (It doesn't have isolated ground.) It's inhibit input like below:
-
Opening a .tif or .tiff file in Internet Explorer using Quicktime in Window
How do you open a .tif or .tiff file within Internet Explorer using Quicktime in Windows 7? Thank you for looking.
-
On a mac computer, how do i set the default brower to open up links in emails to Safari, and not Mozilla == User Agent == Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.5; .NET CLR 1.1.4322)