Stock details of a material with batch details

Hi.
I am developing a PP report for which i require the available material (un restricted stock) details and their batch details which are being displayed in MMBE (tcode). Is there any function module or BAPI or else what is the table name for finding this. Please help me for this for which i ll be very gr8 ful.
Thanks.
Ashok

Hi Ashok,
Check these tables MARDMSEGMKPF.
Try this FM's also,
MB_READ_MATERIAL_STOCKS
MD_STOCK_REQUIREMENTS_LIST_API
Check this link.
https://forums.sdn.sap.com/click.jspa?searchID=3418879&messageID=291518
Thanks,
reward If Helpful.

Similar Messages

Inventory report with Batch details

Hi,
Is there a report that has inventory on hand with batch detail in B1 2007?
Thanks,
Olga

Dear Rahul,
I have generated a batchwise stock summary report as on any date on SAP B1 8.82.
If required the transaction details can also be generated from this.
Please mail me @ [email protected] if you need this report.
Thanks,
Nabyendu

Material with batch management

Hi gurús,
We have a material with Batch management for which already took place movements. Sales orders and lots have already been created.
It is posible removed the mark and use the material as non material with batch lot?
Thanks in advance for the help
Regards
Enzo

Please check:
http://help.sap.com/saphelp_47x200/helpdata/en/eb/650362e5a511d285ed0000e82013e8/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/8d/3e59fd462a11d189000000e8323d3a/frameset.htm

Complete details of Import Purchasing with Exise Details

Hi,
Can anyone pls send me the Complete details of Import Purchasing with Exise Details.
regars,
ramakrishnareddy.g

Hi,
please follow the process as told u
1. create import PO with all the duties. But here there are some duties which are supposed to be paid to the customs. so we select the condition type and click on conditiondetail icon and here we enter the Customs vendor number and save the PO.
2. if release of PO is there release
3. then invoice is made with customs vendor by selecting planned delivery costs in the options on the right of the screen
4.Then capture excise invoice J1IEX_C
5. Then do a GR with PO
6. Then post excise invoice J1IEX_P
7. Then again do a envoice with the same PO number but select Goods/Service Items on the right.
This is the procedure to be followed for import cycle in CIN
Thanks & regards,
Kiran

Stock but non-valuated material with FOC flag in PO but system asking for..

Dear all,
We have create a new material type which is stock but non-valuated material masters which measn in the "Qty Updating" checkbox is checked, while the "value updating" checkbox is unchecked.
Our process is when we create PO of this item, we will flag the "FOC" checkbox in the PO line item in ME21N.
However, when I perform the above step, i hits the following error message:
Account assignment mandatory for material 40000010 (enter acc. ***. cat.)
Message no. ME062
Diagnosis
There is no provision for value-based inventory management for this material type in this plant. Account assignment is thus necessary.
Procedure
Please enter an account assignment category.
Question, why system still want me to key in an account assignment category and with GL and cost center? this is suppose to be a Free of Charge item with the above setup and procedure?
Please advise.
Thanks.
Tuffy

Hello Kate,
Our goal is the user does not need to key in any GL account and cost center as it is FREE. which is why we have a customized material type solely for material like this (see my previous writing).
Does it means, I need to create an customized account assignment category with consumption posting using "V", and checked the Goods receipt checkbox, and checked the GR Non-Valuated checkbox ?
thanks.

Material with batch is stuck in storage bin.

Dear Gurus,
I have a scenario here.
previously material A has turn on the batch management. later then, it is turn off without checking properly. Now in the system, material A is stuck in a few bins with batch. Our master data user do not allow us to turn on and off the batch because it will affect other plant.
Has anyone encounter such issue before?
I need help badly.
Thanks in advance.
Regards,
Santthi.

You cannot turn off batch managment "without checking properly". You could just turn off BM, if batches already exist, with an own created ABAP. And this alone is causing your troubles.
Best, you take a weekend where nobody in the plants are working, then you use the same uncomplient ABAP to switch BM on again, goods issue your batches, run archiving, for the batch records and switch off BM using the regular way.

Initial Stock Taking template for Items with Batch Management

I need to upload the Items for the initial Stock Taking but every item uses Batch Management. and i dont see another template. What template is the best for the initial Stock?

Hector,
You will use the templates in oInventoryGenEntry folder.
The templates you will need are
Documents.xlt
Document_Lines.xlt
BatchNumbers.xlt
Documents template sample
RecordKey...DocDate......... DocDueDate
1.................20080106...... 20080106
Document Lines template sample
RecordKey....LineNum.. AccountCode....... ItemCode..... Price...... Quantity......WarehouseCode
1.................. 0........ _SYS00000000xxx...... A1......... 100.00....... 20................. 01
1.................. 1........ _SYS00000000xxx...... B2.......... 180.00...... 30................. 01
Batch Numbers template sample
RecordKey.... BaseLineNumber..... BatchNumber.... Quantity
1.................... 0...................... 100..................10
1.................... 0...................... 101..................10
1.................... 1...................... 400..................15
1.................... 1...................... 401..................10
1.................... 1...................... 402...................5
The link is between the BaseLineNumber from the Batch template and LineNum from the Document Lines template. Please try this and it shoud work.
Best wishes
Suda

Report with customer info for an Sales Order with batch details

Hi
Can any one please tell me the SAP REPORT with contains data of customers were shipped a specific product (material number) by batch number. report with the name and address of the customer, the sales order number and the number of products that were shipped.
Thanks
Nick

Hi nick,
See if anybody has worked on SIS (sales information system) in your team.
He can help you out to create one info structure , by selecting desired characteristics, key figure with respective update rules. though its require lot of configuration but you can make it without abap development.
(I couldn"t make it in time to provide you detailed configuration but below given path will take you to the configuration area )
IMG - LG -Logistick information system -logistick data werhouse- data basis- field catalogue.
IMG - LG -Logistick information system -logistick data werhouse- data basis -
infostructure.
IMG - LG -Logistick information system -logistick data werhouse- data basis - updating - update defination & update rules.
( MC18, MC21, MC24,& MC30)this transaction help to create field catelogue, info system, update rule & generation log respectively.
karnesh

Make to order and stock both in one material with consignment

Hi Seniors
FERT Material = XYZ which is being used for Make to Order and Make to stock both.
In case of make to stock scenario from GR u2013 101 and PGI made @ std price. At the time of Consignment 631 mvt. No accounting document is generated. As per my knowledge its fine. No issue.
In case of Make to order scenario for above material.
Q.1   At the time of goods receipt (101 Mvt) from production order, accounting document is generated at the rate of Per unit target cost of production order and no variance shown on production order. Why not accounting document is created at Std price of Material?
Q.2 At the the time of consignment an accounting document generated with following entry.
    Finished Goods Inventory      Dr
    Price difference                   Dr
                    Finish Goods Inventory Cr
Why accounting document is generated at the time of consignment in case of make to order scenario? Pls confirm is this a sap standard behavour or anything wrong with me. As I told earlier that in case of make to stock when we make 631 mvt there is no accounting document generated.
Note: My standard price is on the base of mix costing using two production versions. Every time we create production order in each version.
Regards
Imdad

Hi Imdad
Q1: Why not accounting document is created at Std price of Material?
Check your req class... There is a Field called "Valuation"... your valuation depends on whether you select M or A there... You can decide to valuate based on CK11N std cost estimate or based on Sales order cost estimate / Prod order cost estimate
So, in a nut shell, you can configure the system to generate acc doc at CK11N Std cost also
Q2. Why accounting document is generated at the time of consignment in case of make to order scenario?
In my opinion, your MTO stock is maintained in Table EBEW.. Pls check that... WHen you do GR from Prod order, it resides in EBEW table..
However, when you send it as a cons stock, the link to sales order is lost and your stock is no longer a MTO stock.. Hence, it is valuated at CK11N Std Cost.... If there is a diff between CK11N cost and GR Price, then PRD is generated... Thats why you are seeing PRD in your case
BR, Ajay M

Warning message at the time of GR for a material with Batch Management

Dear All,
   I am new to MM,
     We are using batch at plant level. For some materials user dont want maintain
     Batch classification in Material Master. At the time of Goods Receipt posting with ref-to PO user getting warning message like <b>For batch 0000000139 of material 212030602400000 4F10, no class could</b>. I check system messages setting transaction code OCHS for batch management, but I didnt found this type of message in the list.
Plzz can any one help me where I need to change system settings?
Thanks in advance.
Meeravali shaik.

HI,
Check in the IMG node Logistics general > Batch Management > Define attributes of system messages.
Regards,
RitiG

Packing Material with Batch Management and Shelf life expiration date check

Dear All,
          I created a packing material and activated batch managemnt with shelf life.
            At the time of GR the batch should be created automatically or if i want to create a batch manually for some materials how to do it in the system.
                     Help me

Before going ahead with the batch creation,
you need to activate the batch mngmnt level (i.e.Client,plant,material level)
And also activate the Nor.ranges.
Then Create the Classification,Characteristics and assign the Chrctstics to Class.
Then create the batch
T Code:
CT04 create Char.
CL02-Create Class
CL24N:Assign class to material
MSC1N:Create Batch

Withdrawl of material(with batch) for scrapping that shelflife passd

Dear Guruz,
in have an issue in withdrawl for scrapping with mvt type 551. But my materials are maintained in batches and the shelf life has expired. The materials are also damaged so i want to scrap them but there exist stock for those materials. how can in do it.?

batchxxxxxx is in use.plz use another batch
Dont you have a message number ? double click the message to see the message number. It sounds like a z-message, which means it is home made, triggered from a user exit.
Best you try it manually in MIGO, before you test it with a program
Edited by: Jürgen L. on Sep 2, 2011 6:12 PM

Stock allocation for sales orders with batch job

Hi Friends
We have a batch job to allocate stock for sales orders which runs every week , currently this batch job is meant for plant 1000 with availability check procedure Z1 .
I need to incorporate for same batch job plant 1000 with availability check procedure Z2
Just I need to know that there is any potential impact and it causes any problem ?
Thanks In Advance
Rusheek

Hi,
Check what difference is between procedure Z1 and procedure Z2. As we cant see this, you will have to analyze what Z1 was doing and what Z2 is expected to do. Broadly speaking this is preety subjective to your project.
You analyze and try to find out the impacts. If needed take help of abaper.
Rgds,
SB

Negative stock allowed for a material with SDG assigned

Hi All ,
I have raw material for which stock determination group assigned in MRP 2 view for issuing the componets .
I also marked allow negative stock in plant/storage location view .
Normally if the stock determination group is not assigned and if the negative stock allowed in plant/storagelocation is checked then during backflush though the required qunatity is not availabe then the stock will be marked in negative quantities , so that when GR happens for this material will overcome the negative quantity .
But since stock determination group is assigned , though the negative stock allowed is checked the backlogs are created in MF47 rather making the stock of the material negative [ I assume this behaviour is because the SDG is determined dynamically ]
Is there any setting required to not sit these backlogs in MF47 when the negative stock allowed in plant/storagelocation is checked
Thanks
Sireesha

Hello Sireesha,
Even I have similar issue, can you please let me know if this is fixed for and how did it work.
Thanks
Chandra

How to create a batch for a material, with batch characteristic input?

I am currently using BAPI_BATCH_CREATE to create batch for materials in my program. However, I find no way to input the batch characteristics. Is there any existing function module responsible for that? Thanks!

Hi,
You can use FMs 'CLVF_INSERT_AUSP' or 'CLVF_INSERT_AUSP' to insert or update characteristics for materials.
In the structure INS_AUSP or UPD_AUSP -
OBJEK corresponds to the material number,
ATINN is the characteristic name,
KLART is the class type which is '001' for materials, and
ATWRT is the characteristic value.
Populate values into the above fields for the batch of materials and call this FM.
Reward points if found useful...!
Cheers
Abhishek

Stock details of a material with batch details

Similar Messages

Maybe you are looking for