Stock determination finds deleted storage location

Hello gurus,
we are using stock determination in MIGO for goods receipts to automatically determine the correct storage location for delivered goods.
Now we deleted one storage location and moved all materials stored there to another one.
But still, for certain materials, the stock determination gives the old location. Then, when we try to post the receipt, there is (of course) an error because the storage location has been deleted.
We use only one very simple stock determination strategy with just one item:
Special stock indicator: F (unrestricted-use stock)
Priority indicator: 1
Any ideas, why the old location could be found?
Thanks
Alicia

Hi Jürgen,
no, I did not remove that item, because it was not even there in the first place.
As I wrote in my OP, there is only one item with
Special stock indicator: F (unrestricted-use stock)
Priority indicator: 1
The storage location is blank!
I never used stock determination before and I know it is normally used for goods issue only, but in this system, there definately is an button called "stock determination" in MIGO for goods receipts. And when I click on it, the system determines a storage location where the material is stored. This works perfectly, except for the materials with blocked locations.
Alicia

Similar Messages

  • Stock determination with multiple storage locations

    Dear Friends,
    Kindly suggest how to do the following configuration in Stock
    Determination.
    The scenario is
    For example Unrestricted Stock existing for material " X":
    Plant 4000: 10 Qty
    Sloc1 -- 6 qty
    Sloc2 -- 4 qty
    There is sales order (only plant is specified in Sales Order, No sloc) for 7 Pcs when the stock determination process is carried out it is showing the stock available is 10 qty. But when they make the PGI it is picking only 6, ie., from SLOC1, but it is not picking the balance 1 qty from SLOC2 even
    though the material is available.
    The same problem exists for Production order also.
    Thanks,
    Regards.
    Krishnan.

    Hi Hari...
    Make sure you have maintained the priority for sorting & the item table for the same.
    Also in the No.Splits ( number of splits ) give a maximum possible value like 999.
    The problem happening in ur case is, i think this fiels in blank in configuration . So system is stoping the quantity spliting, which will look for the series of S.Locns till the target quantity is reached.
    Reward points if useful/solved.
    Thanks
    Mahesh

  • Where and how to find the storage locatation for the consignment stock

    where and how to find the storage locatation for the consignment stock (customer stock )  for more than one storage location .
    table :msku
    material no    -   werks - batch
    xxx                   sg11  - 200352ac
    table : mchb
    material no    -   werks  -lgort - batch
    xxx                   sg11   sg10   200352ac
    xxx                   sg11   gs11   200352ac
    note : each stock location having same batch no in different storage and my question how to find which link for msku to mchb .

    Hi,
    Try the table MARD: Storage Location Data for Material, where in the field LABST will give the stock field, against a given material/plant/Storage Loc.
    Regards,
    JLN

  • Stock transfer between Plant/Storage location to Plant/Storage location

    Dear Experts,
    This is a MM component of SAP Retail.
    We have 4 brands ( Plants of type B, Plants of type C etc) that needs inventory from the same Distribution center (Plant A) for some common products. Here the direction is to prioritize the inventory per brand. The requirement is one brand should not take the inventory of the other brand.
    To overcome this problem , the solution proposed is to have different storage location for different brands in the same DC.
    When we run replenishment  planning for the brands and do a ATP check, the availability check should consider only the one issuing storage location in the DC which we allocated for the brand.
    I do see the following set up in SPRO and I have done the following.
    Step1: Activate Stock Transfer between Storage Locations
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> u2018Activate Stock transfer between storage locationsu2019
    Step2: Assign Delivery Type and checking rule according to storage
    SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations->Assign Delivery Type and Checking Rule According to Storage
    Step3: Define Shipping Data for Stock Transfer between Storage Locations
    SPRO ->Material Management ->Purchasing ->Purchase Order ->set up stock transport order ->set up stock transport order between storage locations -> Define Shipping Data for Stock Transfers between Storage Locations

    Step4: Define Rule for Determination off Shipping Point
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations -> Set-up Storage-Location u2013dependent shipping point determination->Define rule for determination of shipping point
    Step5: Shipping Point Assignment According to Storage Location
    SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> Set-up Storage-Location u2013dependent shipping point determination-> Assign Shipping Points According to Storage Location
    Question.No:1- After completing the above set up  in me21n, the issuing storage location field is greyed out. I am not able to enter any value here. Can you please help.
    Question.No:2
    I do see the following setting.
    Under IMG ---> Material Management ---> Purchasing --> Purchase Order --> Set up Stock Transport Order -->Business Add-In for Determination of Issuing Storage Location
    Display the IMPLEMENTATION
    Double click on the method GET_SUPPLYING_SL
    Click the Execute button
    Click the detail button on IF_EX_MD_EXT_SUP
    Execute GET_SUPPLYING_SL
    There is a prerequisite for this BADI .I have done those things.What i dont understand is where to force the combination of supplying site/issuing stor.loc/receiving site/receiving stor.loc
    Kindly provide your inputs.
    Thanks,
    Vasanthan

    Dear,
    Have You configure MRP in second plant (where you want to transport the Material).
    Please try with this and do again Po for stock transport.
    Regards
    Piyush Patel

  • Inspected stock posting to multiple storage location without batch

    Hi,
    At the time of Usage Decision, I want to post the inspected stock to multiple storage location i.e., Rejected Stock to Scrap Storage Location, Qualified Stock to Unrestricted Use Storage Location.
    Quick response will be appreciated.
    Anandkumar KS

    The scrap line has no storage location since that stock is typically written off and scrap cost center is defined in configuration.
    A possible alternative is to set up VMENGE08 and VMENGE09 with the same material movements you want to use.  You obviously aren't using the 553 movement type as that writes off the material.  That could give you two lines to use for your scraping.  I can't remember if these stock posting lines give you the storage location option or not and I don't have a sandbox available to test today.  If you need to post more then two grades in one inspection lot, you'll have to do the first two postings, save the UD, then come back in and do a second posting for the next two grades.
    Read the configuration help file you'll find in confg for "Define Inventory Postings" under the QM config.
    You can also change the displayed names of the stock posting lines.  That's explained in the config file as well.
    Craig

  • Determination of Issuing Storage Location in STO

    Hi Gurus
    How can we auto determine the issuing storage location in Stock Transport Order (STO)? If it is via user exit, could you please provide the user exit?
    Appreciate yr help on this.
    Thanks
    Rgds..Sanjay

    Had you gone to this node
    Materials Management -
    > Purchasing -
    > Purchase Order -
    > Set up Stock Transport Order  -
    > Set up Stock Transfer between Storage Location -
    > Business Add In for Deterination of Issuing storage location.
    See /ISDFPS/MD_EXT_SUP may be useful .

  • Delete Storage Location

    Dear All ,
    I have created  X material , while creation stoeage location was 0001 .
    Now extended for 0002. I dont want storage loc 0001 for the same material . thr is no stock on that storage location ? how to delete the storage loc ?
    Regards ,

    no its not working
    Why? If you mark the material master for deletion at the proper organisational level it should work. You can set the related message as warning or error.
    remarks:
    You can not delete the extension of your material master trough MM06, it is just for marking the material master with DF. If you want to get rid of that view (extension), you have to archive the material master and then recreate - I wouldn't suggest this.
    The title of your thread is "Delete Storage Location" but this doesn't cover your question, to delete a SLoc is totally different from this.
    Please also be aware of the fact that if your material master is not extended for a SLoc, the view can be created automatically during posting the material to that SLoc, based on your settings...
    Regards,
    Csaba
    Edited by: Csaba Szommer on Dec 25, 2008 12:50 PM

  • Stock Transfer between 2 Storage locations

    Dear All
    I want to configure Stock Transfer between 2 Storage locations.
    I have activated the same in configuration but can anybody provoide complete details at to how the process happens.Is there any standard document type to be used like UB in case of stock tranasfer between plants,do we craete SD Delivery etc.
    Regards
    Vaibhav Mahajan
    Edited by: Csaba Szommer on Aug 22, 2011 12:56 PM

    Hi
    Stock Transfer between 2 Storage locations,there is no seperate configuration needed( like stock transport order b/w plants  doc type UB), just goto MIGO
    There are 2 options are there for Stock Transfer between 2 Storage locations
    1. one step procedure movement type 311(from unrestricted to unrestricted)
                                                                   323(from quality to quality)
                                                                   325(from blocked to blocked)
    2. Two step procedure movement type 313 and 315(only possible from unrestricted to unrestricted stock)
    During this transfer no accounting document will generate because you are transferrring the stock within the plant,
    Thanks

  • Stock Transport order issueing storage location determination

    Folks,
    In case of a Stock transport order scenario in which plant A with SLOC1 delivery to plant B with SLOC 2. Is there any option how the issueing storage location can be determined? The delivering plant can be determined through the special procurement key but there is no option for the issueing SLOC.
    Regards,
    MdZ

    Hey Karen!
    I am not sure if I understand your problem correctly.
    You do not want the system to create a new MARD entry when postin goods issue.
    You can enable/ disable this function with transaction OMB3 in the customizing.
    have fun
    Flo

  • Stock report based on stock type with a storage location

    Is there a standard SAP report that will give me the stock information based on the storage location and stock type (unrestricted, QI, blocked, etc?)...for instance if I want to find all QI stock in a certain plant/storage location?  I want it to show a list of materials and their quantities, not on an individual basis as in MMBE.
    Thanks!

    Thanks again for your response.  I've used your last mentioned method before but with MMBE you have to enter a material number.  We want a report of all materials in a particular stock type.
    I was able to achieve this by goign to MB52 and setting up a filter on a layout.  My users can now select that filter on the selection screen to get the desired result.
    Thanks again for you attempts to help!

  • Material Master Record - How to remove or delete storage location

    Dear all,
    Is there a way to remove or delete a storage location accidentally extended via MM01 due to extending the general plant view?
    I've tried the following:
    1. I've used MM06 to flag the particular storage lcoation for deletion. However, when go to MM02 and select the plant view, the storage location that already been flag still exist for selection. I only get the warning prompt "The storage location has been flag for deletion".
    2. I tried MMSC attempt to delete and I get either messages with different material master record:
    a) "Material not fully maintained for this transaction/event"
    OR
    b) "Storage location 60BF already exists and cannot be deleted"
    P/S: If this question has been asked before by others, please point me to that thread.
    I'm grateful for any suggestion. Thanks.
    Steven

    Hi Jurgen,
    I've gone through the data archiving project in the past. I was actually hoping I don't have to go through this big exercise for this minor situation.
    The storage locations in the SAP system are fine. The problem is that when I came in to this organization, I found out that the procurement users have accidentally extended material master record to those storage location irrelevant to them. Those users don't post any stock to those accidentally extended storage location. They admit that it was a mistake. So, I don't really have to do stock movement or GI out from those affected storage location because there's nothing in them.
    Now that I've initially flag for deletion (MM06) of those mistakes done by those procurement users over the few years counting to 2000+ material master records affected. But the standard behavior of the SAP system allows change to proceed in MM02 except for that warning message MM081. So, I was actually asking around to explore if there's actually an option to make it an error prompt instead and stop the whole change process at MM02 transaction level.
    If I may re-confirm, what I've done so far via flaging for deletion of material master record at storage location level - is this the only correct solution available?
    Hope this clarifies my intention of opening this thread. Sometimes, users are quite tough in accepting the results from standard SAP system behavior.
    Thanks for the time in explaining.
    Steven

  • Finding Plants\Storage locations associated with the Routes

    Hi,
    I need to find all possible Plants/Storage Locations associated with the Route in hand.(These routes can be found in TVRAB table).Is there any mapping done in SAP between Routes and Plants or Routes and Departure Points ?
    If anyone has any inputs regarding this, it will be really helpful.

    Hi,
    To determine the route we need to know the Plant and the Shipping point or connection point/port.
    I think we can find the routes in table TVRO or VBLK.
    and for route descirption we go for the TVROT
    First check the tables for the Plant and shipping point then we can link to the route.
    Pls check this link
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/560dee545a11d1a7020000e829fd11/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/17/c0b758903111d2b42f006094b9b9a0/content.htm
    Regards
    Lekha

  • Stock on posting date -storage location and batch wise

    Dear All
    I need to developa report exactly same as MB5B but with storage location and batch wise.
    We need  storage location wise opening stock, total receipts, total issues and closing stock, and values for given time period.
    I have gone through some history tables like MCHBH and MBEWH.
    But all the history tables are having fileds for period wise but not date wise.
    Any focus on this?

    You have to read the coding of MB5B to see how SAP is doing it.
    The stock per date is calculated, starting from a month end, adding or reducing quantities based on movements until the date in question is reached.

  • Stock valuation down to Storage location level

    Dear all,
    System setup for stock valuation is till Plant level. And understand that's how data stored in table MBEW and MBEWH until plant level only.
    Eventhough that is system standrd, is that possible to get the stock valuation until Storage location level?
    For eg: In MB5B, there is opening stock, closing stock and the material movement posting. I need to get opening and closing stock for each storage location.
    Could you please comment if there are tables store these data? Kindly comment.

    Hi Afshad Irani,
    Thanks for your reply. Understand from the previous post that stock valuation for storage location can be done via table MARDH or report MC.9, but this tools are excess base on period/month basis.
    My case, i need to report storage location stock for both (1)last month 06.2010 and (2)yesterday's stock 06.07.2010. So i can use MARDH table to report (1)last month stock for each storage location. While for (2) yesterday stock, table MARDH isn't help.
    Could you please advice further?

  • Downlading Material stocks and its Value, storage location wise

    Dear Experts,
    As we are reimplementing SAP, we need to download the
    a)     stocks Plant and storage location wise for all the materials. Bcoz stocks are maintained in different storage locations.
    b)     Value of stocks for each material in the Plant and storage location wise, Bcoz stock qty will be different in different location and hence the value will be dependent upon the qty ?
    How can we extract this ? From which tables do we need to extract  this ?
    Can any one guide on this ?
    Regards     
    Javeed Ahamed.

    Goto MB52 report ,change the layout asper your requirement and extract to excel.To extract follow this
    go to menu bar
    system-- list-- save -- local file
    alternatively you can take it MBEW table also(se16n)

Maybe you are looking for

  • Is there some way to make the iPad Camera Connection Kit work on the iPod touch?

    I bought the Camera Connection Kit because a tech said it would work with my iPod Touch, but I get the message that the iPod does not support that connection. I would really like itt to work because I have used an older iPod to back up photos while o

  • What are necessary settings to be enabled or disable while gifting my iDevices to someone..

    In case, I will gift my iDevices to my colleagues or friends, then what are the settings to be disabled. How to delete my Apple User ID from the iDevice so that when they want to purchase any App from App Store, they will enter there credentials. Can

  • Log out issue in Employee Self service

    We are encountering an error when people click on log out in self service page Once all the steps are done such as adding a dependent and making elections, a confirmation page comes up with the summary of benefits info. At this point, there is a "Log

  • Bad quality footer in PDF export

    I have been using pages for a while and find it really handy for the day to day's work. But I found an apparent limitation: I often use footers that are really small (8pt) and in a light font (Helvetica Neue light). When I export my file to PDF (both

  • PP order date issue

    Hi PP Gurus, Iam creating production order via T-code CO01 and have 3 operation in the production order. In the routing the leadtimes in maintained for each operation like 15 days.The schedule type is forward scheduling. When i create production orde