Stock determination online not working

Hi experts,
I've setup the stock determination rule and strategies....so that when the background job create the transfer order, it'll always pick up the consignement stock before own stock. However, I also chose the 'stock determination online' and i assume this indicator is to enable the online detremination so that when two types of stocks are available, i can still determine online which types of stocks would be picked. but the problem is when i did online, i tried to choose some stocks from own stock and some from consigned stock,... after copy the storage, it'll always generate the mapping to pick the first priority stock only...
i.e. my order is 5 pc.... i wanna pick 3 from own stock, 2 from consigned stock... but it'll always automatically pick 5 of consigned stock instead...
i wanna ask other than checking this indicator 'stock determination online' , is there anything else i missed to setup to cause the problem?
Elaine

Hi experts,
any help?
Elaine

Similar Messages

Enhanced Interface Determination - does not work!

Hi guys,
well i have a scenario where i have done a multi mapping where MT_TYPSCH is generated for each new value which occurs in one special source field.
<NO>1</NO>
<NO>2</NO>
<NO>3</NO>
..so three MT will be generated.
Now i would like these messages devided to different Business Services where each one has on FTP-CC to write a file with a certain filename, e.g. File1.txt, File2.txt, File3.txt.
Therefore i thought i use different receivers in Receiver Determination with using Conditions and pointing to a value in field with XPATH. So depending on field <NO> the message should be routed to the given receiver targets.
I surely use the enhanced Interface Determination because i use multi mapping.
But when i run test, i receive 3 files with different names but same content. For me the receiver determination is not working that good.
Can someone help me on this?!
source:
<ZBC0>
<IDOC BEGIN="">
<EDI_DC40 SEGMENT="">
<ZBC0 SEGMENT=""> 0...9999
<NO>1</NO>
<TYPE>1B20-6</TYPE>
<SPEC>152J</SPEC>
</ZBC0>
<ZBC0 SEGMENT="1">
<NO>2</NO>
<TYPE>1B20-6</TYPE>
<SPEC>152J</SPEC>
</IDOC>
</ZBC0>
target:
<?xml version="1.0" encoding="UTF-8"?>
<MT_TYPSCH> 1..1
<TYPSCHRecordSet> 1..1
<TYPSCHDetailsStruc> 1..unbounded
<FELD1/> {represents content of <No>}
<FELD2/>
<FELD3/>
</TYPSCHDetailsStruc>
</TYPSCHRecordSet>
</MT_TYPSCH>

Hi Mario,
ok here is my requirement.
We get ONE IDoc in which several items are listed. These have one field <NO> which can have the values 1,2 and 3. Depending on this value the items should be collected and written to different files on FTP.
My approach is that i divide all the items in mapping in different Message Types. This MT should be routet to different business services which has one CC to write on FTP.
To get the items with e.g. <NO>1</NO> i took condition in reciever determination using xpath. ((/ZBC21/IDOC/ZBC21/NO = 1).
So depending on the mapping everything runs - in my point of view but the different messages are not routed to the different services to write them to different files.
Source
<ZBC0>
<IDOC BEGIN="">
<EDI_DC40 SEGMENT="">
<ZBC0 SEGMENT=""> 0...9999
<NO>1</NO>
<TYPE>1B20-6</TYPE>
<SPEC>152J</SPEC>
</ZBC0>
<ZBC0 SEGMENT="1">
<NO>2</NO>
<TYPE>1B20-6</TYPE>
<SPEC>152J</SPEC>
</IDOC>
</ZBC0>
target:
<?xml version="1.0" encoding="UTF-8"?>
<MT_TYPSCH> 1..1
<TYPSCHRecordSet> 1..1
<TYPSCHDetailsStruc> 1..unbounded
<FELD1/> {represents content of <NO>}
<FELD2/>
<FELD3/>
</TYPSCHDetailsStruc>
</TYPSCHRecordSet>
</MT_TYPSCH>
The output should be files with content of items depending on field <NO>.
file1.txt (all items with <NO>1</NO>)
file2.txt
file3.txt
I hope i made it clearer!
br

My Stocks widget is not working. The graph part works, but not the stock value section.

My Stock widget is not working. No prices are displayed. Fix?

If it is the Apple provided widget, Yahoo! Finance, there have been a rash of problems lately - see the More Like This box at the top right.
1. If you have any mutual funds loaded, try removing them.
2. Try opening a 2nd copy of the widget. That has worked for me a couple of times.
3. If you have a backup, try restoring the widget. It is normally in the hard drive/Library. It might be in your user folder/Libary also. See below on how to access your user library.
4. Try removing the com.apple.dashboard.plist in your user folder.
You need to look in your user Library/Preferences for the .plist. Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Preferences/com.apple.dashboard.plist. Move the .plist to your desktop.
Log out/in and test. If it works okay, delete the plist(s) from the desktop.
If the same, return the .plist(s) to where you got them from, overwriting the newer ones.
If you prefer to make your user library permanently visible, use the Terminal command found below.
Show User Library
You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.

Online # not working Australia

Hi...my online number is not working. I've checked all the settings, have got the latest skype and I've given it over 24hrs to go through but still not able to have people call me on the online number. It seems that others have having issues and would love skype to assist us with this issue please.

Did you get a resolution to this issue? we are having an issue now where our long term skype number isn't working. Support have been trying to resolve for 3 days but it is a business line, and that is a long time for a business.

Receiver Determination-Condition not working

Hi all,
It is simple iDoc to File scenario. I have two receivers based on a condition in the receiver determination. I am getting all data into both receivers without executing the condition.
Below is the condition. Any idea why this is not being executed? Thanks for your help.
(/ZGENERIC_OUTBOUND01/IDOC/Z1GENERIC_SDATA/SDATA = '1C')
(/ZGENERIC_OUTBOUND01/IDOC/Z1GENERIC_SDATA/SDATA = '1B')

>   <?xml version="1.0" encoding="UTF-8" ?>
> - <ZGENERIC_OUTBOUND01>
> - <IDOC BEGIN="1">
> - <EDI_DC40 SEGMENT="1">
>   <TABNAM>EDI_DC40</TABNAM>
> ......
> ......
>   </EDI_DC40>
> - <Z1GENERIC_SDATA SEGMENT="1">
>        <SDATA>1C</SDATA>
>   </Z1GENERIC_SDATA>
> - <Z1GENERIC_SDATA SEGMENT="1">
>        <SDATA>1C</SDATA>
>   </Z1GENERIC_SDATA>
> - <Z1GENERIC_SDATA SEGMENT="1">
>        <SDATA>1B</SDATA>
>   </Z1GENERIC_SDATA>
>   </IDOC>
>   </ZGENERIC_OUTBOUND01>
You cannot have both the conditions in same IDOC at the same time. Like here in the above example you have 1C & 1B both, so in this situation it will not work.
Just for testing either remove 1C or 1B and then test. I am sure it will work.
You cannot send the same payload at the same time based on two different conditions to 2 different receivers except you put 'OR' in your conditon for 1C & 1B. But in this situation message will go to both of the receivers which you don't want here.
Regards,
Sarvesh

XI - Receiver Determination Condition not working

I created a Condition on my Receiver Determination to stop some messages from being sent based on a field in our message.
It works when using some test tools (workbench, SOAPUI, etc) but not when coming from our MDM system. The beginning of the input message looks like what is listed at the bottom of this message(and it works).
But when coming from MDM the one node looks like this - there is no colon ( after the xmlns.
               <YMDMB_CREMDM xmlns='http://intel.com/MDM/BUPA/Vendor'
without the colon ( the condition does not work; with the colon it does work.
the sending system is not able to add the colon.
Does anyone know why the colon matters and what we can do to get around it in XI ??
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<YMDMB_CREMDM xmlns:='http://intel.com/MDM/BUPA/Vendor' xmlns:xsd='http://www.w3.org/2001/XMLSchema' xmlns:soapenv='http://schemas.xmlsoap.org/soap/envelope/' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance'>
   <IDOC BEGIN='1.0' xmlns=''>

below is the beginning of the XSD from the IDOC (it is custom but based on a SAP one - just added a few fields)
I also put the start of the input message below that.
also to make sure I was clear, if all we do is change this node of the input message by adding a colon after the xmlns everything works.
               <YMDMB_CREMDM xmlns='http://intel.com/MDM/BUPA/Vendor'
thanks
begging of XSD from IDOC
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
     <xsd:element name="YMDMB_CREMDM">
          <xsd:complexType>
               <xsd:sequence>
                    <xsd:element name="IDOC" type="YCREMDM.YMDMB_CREMDM" />
               </xsd:sequence>
          </xsd:complexType>
     </xsd:element>
     <xsd:complexType name="YMDMB_CREMDM.E1BPADTTX">
here is beginning of input message
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<YMDMB_CREMDM xmlns='http://intel.com/MDM/BUPA/Vendor' xmlns:xsd='http://www.w3.org/2001/XMLSchema' xmlns:soapenv='http://schemas.xmlsoap.org/soap/envelope/' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance'>
   <IDOC BEGIN='1.0' xmlns=''>

Re: video content online not working!!!

Hi,
I am not sure if this is the correct place to post this query but I cant play any video online (utube,iplayer etc). We use to be able to. Does anyone know what this can be?
P.S. Just tried my macbook and its not working either!
Message was edited by: angelfire777

Since updating to 10.6.4, have you updated to the latest Flash Player?
http://get.adobe.com/flashplayer/
Be sure to follow their installation instructions on their website.

Why you tube online not work anymore on 5800 xm?

my video streams worlk on all sites except you tube since yest

"yet, they should update it if it does not work like that anymore!"
www.apple.com/feedback
You can try this:
http://osxdaily.com/2011/07/21/front-row-for-mac-os-x-lion/
Worked some what in Lion but was very spotty. So I got Plex. It's free.
http://plexapp.com

Agent Determination Rule Not Working

I have created an new agent determination rule in PFAC.
The category I used is "Agent Determination: Responsibilities".
I have also selected the "Terminate if Rule Resolution has no Result" option.
The container has one element in it which is NOT mandatory called "Clinic".
I have set up the responsibilities, where there is only one which catches all - In other words, I created a responsibility for Clinic "*". I have also assigned a position as a responsible agent. The position is linked to a person number, and the person has a user-name assigned - All are in the valid period.
If I test the rule, and do not enter anything for the Clinic, and click the test button, it returns my one agent, which is correct.
The problem is that in my workflow I have assigned the rule as a responsible agent. At runtime, the workflow falls over saying that the agent determination has failed. This does not make sense, since I have not passed anything in binding to the rule. As mentioned earlier, when testing it works fine. I have tried using the rule with and without binding but it wont work. If I change the step in the workflow to rather use position, it works.
Please let me know if you have any ideas - I am really battling with this strange problem.

I tried deselecting "Terminate if Rule Resolution has no Result" in the rule definition.
Having done that, the workflow now works correctly - It actually DOES find an agent and the workflow goes on as expected.
This is really weird, because if the terminate option is selected, it falls over saying that no person was found. Now with the terminate option not selected, it finds the agent - Is this a bug, or am I misunderstanding something???

ONLINE # NOT WORKING - UPGRADED - CHANGED PRIVACY ...

MY ONLINE NUMBER [edited for privacy] THAT I PAID FOR FOR A YEAR HAS NOT BEEN WORKING FOR MONTHS. I AM VERY FRUSTRATED. I JUST UPDATED ERGO AM PAYING EVEN MORE MONEY TO SKYPE AND IT HAS MADE NO DIFFERENCE. THE PRIVACEY SETTINGS ARE AT ALLOW CALLES FROM ANYONE AND ALL THE PRIVACY SETTING SAY ANYONE.
PLEASE FIX IMMEDIATELY OR CONTACT ME ON FRANCESANNE2007 OR I WILL CANCELL ALL MY SKYPE SERVICES IMMEDIATELY

Deleted the Shared.XML in the Skype folder than uninstalled the 5.7 beta version and re-installed the current 5.5.?? and set the privacy settings and it started working.

Office Online not working with IPv6

Office Online fails to connect whenever IPv6 is enabled on the device being used. Once IPv6 is disabled it works correctly.
Is Office Online going to be IPv6 enabled any time soon? If not I cannot recommend it's use and will have to go with as competitor's offering.

I am using the recently released free Word Online app for Chrome or in Internet Explorer trying to open the Word app from OneDrive.
The applications may support IPv6, but the routing to reach the apps appears to have a device in the route that does not pass IPv6 traffic.
Tracing route to onenote.officeapps.live.com.akadns.net [2a01:111:f406:400::17]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms 2001:470:1d:80b:fa1e:dfff:fef7:5570
2 79 ms 79 ms 79 ms jwdavidson-1.tunnel.tserv21.tor1.ipv6.he.net [2001:470:1c:80b::1]
3 77 ms 79 ms 75 ms ge2-5.core1.tor1.he.net [2001:470:0:c0::1]
4 78 ms 79 ms 79 ms gw-microsoft.ip6.torontointernetxchange.net [2001:504:1a::34:160]
5 77 ms 79 ms 80 ms xe-7-0-1-0.ymq01-96cbe-1a.ntwk.msn.net [2a01:111:2000:2::1091]
6 88 ms 95 ms 89 ms xe-5-1-1-0.nyc-96cbe-1a.ntwk.msn.net [2a01:111:2000:2::1096]
7 97 ms 95 ms 94 ms 2a01:111:2000:2::39
8 103 ms 99 ms 79 ms 2a01:111:2000:2::15ae
9 97 ms 99 ms 94 ms 2a01:111:2000:2::159a
10 98 ms 100 ms 79 ms xe-0-1-0-0.bn1-96c-1b.ntwk.msn.net [2a01:111:2000:2::5b2]
11 103 ms 99 ms 104 ms 2a01:111:2000:2::145e
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.
Trace complete.
Thanks for your assistance.

Free goods determination is not working

We are on CRM 7.0.
I'm trying to configure Free goods determination in CRM sales order TSA. We have
done all the relevant customizing under CRM -> Basic Functions -> Free Goods.
Free Goods Procedure: 0NA001
Condition Type: 0NA0
Access Seq.: 0NA0
Table: SAP010
We have created the condition master data under transaction /SAPCND/GCM
with the following parameters:
Application: PRT
Maintenance Grp: PRT_FGOODS
When we create a sales order which uses the free goods procedure 0NA001 the system doesn't determine the right product. I would expect a sub item being added automatically under the main item which is part of the offer but nothing happens. Is that the correct expectation?
As part of the configuration settings, we use TAN item category for main item and I have configured item category TANN for sub-item with item usage "FREE" (not sure this is the right setting).
I have debugged the process and in FM FGD_DETERMINE_FREE_GOODS_MULTI, IPC does not return any results or any error messages.
Has anybody gone through the same issues/pain? What point am I missing?
Thanks for input.

karens09 wrote:
What is wrong?
Hello,
You are attempting to call outside your Plan coverage.
The Unlimited World Plan does not include calls to cellphones in Norway - just landlines.
Full coverage details of the Plan are here:
Unlimited calls to landlines and cellphones in
Canada
China
Guam
Hong Kong S.A.R., China
Puerto Rico
Singapore
Thailand
United States
Unlimited calls to landlines only
Argentina
Australia
Austria
Belgium
Chile
Croatia
Czech Republic
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
Ireland
Israel
Italy
Japan
Korea, South
Luxembourg
Malaysia
Netherlands
New Zealand
Norway
Poland
Portugal
Russia (Moscow and St.Petersburg only)
Slovakia
Spain
Sweden
Switzerland
Taiwan
United Kingdom
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Stocks RMI example not working - Security Exception

Hi,
I was trying to run the "Stocks" RMI example that comes with
Weblogic server(see
http://www.weblogic.com/docs45/classdocs/API_rmi.html#clientside)
I compiled and configured the appropriate files, and tried to
load the sample applet (StockApplet.java) loaded on the
StockApplet.html page (using Microsoft IE browser).
However, the applet generated the following exception :
java.lang.ExceptionInInitializerError: com/ms/security/SecurityExceptionEx
     at weblogic/common/internal/TengahClassLoaders.registerURL (TengahClassLoaders.java:51)
     at weblogic/rjvm/RJVMImpl.loadFromCluster (RJVMImpl.java:1106)
     at weblogic/jndi/WLInitialContextFactoryDelegate.newContext (WLInitialContextFactoryDelegate.java:247)
     at weblogic/jndi/WLInitialContextFactoryDelegate.getInitialContext (WLInitialContextFactoryDelegate.java:205)
     at weblogic/jndi/Environment.getContext (Environment.java:122)
     at weblogic/jndi/Environment.getInitialContext (Environment.java:105)
     at weblogic/rmi/Naming.getContext (Naming.java:225)
     at weblogic/rmi/Naming.lookup (Naming.java:67)
     at examples/rmi/stock/StockApplet.init (StockApplet.java:127)
     at com/ms/applet/AppletPanel.securedCall0 (AppletPanel.java)
     at com/ms/applet/AppletPanel.securedCall (AppletPanel.java)
     at com/ms/applet/AppletPanel.processSentEvent (AppletPanel.java)
     at com/ms/applet/AppletPanel.processSentEvent (AppletPanel.java)
     at com/ms/applet/AppletPanel.run (AppletPanel.java)
     at java/lang/Thread.run (Thread.java)
As you can see this looks like some sort of security exception. (StockApplet.java:127)
in the above exception is the line where StockApplet calls Naming.lookup(). So
I'm guessing it has something to do with it getting the Weblogic's RMI support
classes to the local VM and deserializing and installing them, which generates
a security exception.
What needs to be done to make the example work properly?
Thanks,
Leonid Portnoy
(In addition, two more types of exceptions are generated, which might be related
to the cause of the above exception. These exceptions are :
com.ms.security.SecurityExceptionEx[weblogic/rjvm/JVMID.setLocalID]: cannot connect
to "testserver"
     at com/ms/security/permissions/NetIOPermission.check (NetIOPermission.java)
     at com/ms/security/PolicyEngine.deepCheck (PolicyEngine.java)
     at com/ms/security/PolicyEngine.checkPermission (PolicyEngine.java)
     at com/ms/security/StandardSecurityManager.chk (StandardSecurityManager.java)
     at com/ms/security/StandardSecurityManager.chkex (StandardSecurityManager.java)
     at com/ms/security/StandardSecurityManager.checkConnect (StandardSecurityManager.java)
     at java/net/InetAddress.getLocalHost (InetAddress.java)
     at weblogic/rjvm/JVMID.setLocalID (JVMID.java:59)
     at weblogic/rjvm/JVMID.localID (JVMID.java:43)
     at weblogic/rjvm/LocalRJVM.getID (LocalRJVM.java:143)
     at weblogic/rmi/extensions/BasicServerObjectReference.<init> (BasicServerObjectReference.java:44)
     at weblogic/rmi/extensions/BasicServerObjectAdapter.<init> (BasicServerObjectAdapter.java:43)
     at weblogic/rmi/extensions/BasicRequestHandler.<init> (BasicRequestHandler.java:30)
     at weblogic/rmi/extensions/BasicRequestDispatcher.<init> (BasicRequestDispatcher.java:42)
     at weblogic/rmi/internal/OIDManager.initializeDGCServer (OIDManager.java:267)
     at weblogic/rmi/internal/OIDManager.getReplacement (OIDManager.java:176)
     at weblogic/rmi/internal/OIDManager.replaceObject (OIDManager.java:84)
     at weblogic/rmi/server/UnicastRemoteObject.exportObject (UnicastRemoteObject.java:25)
     at examples/rmi/stock/StockApplet.init (StockApplet.java:110)
     at com/ms/applet/AppletPanel.securedCall0 (AppletPanel.java)
     at com/ms/applet/AppletPanel.securedCall (AppletPanel.java)
     at com/ms/applet/AppletPanel.processSentEvent (AppletPanel.java)
     at com/ms/applet/AppletPanel.processSentEvent (AppletPanel.java)
     at com/ms/applet/AppletPanel.run (AppletPanel.java)
     at java/lang/Thread.run (Thread.java)
and
com.ms.security.SecurityExceptionEx[weblogic/jndi/Environment.getProperty]: Unable
to access system property: weblogic.jndi.provider.rjvm
     at com/ms/security/permissions/PropertyPermission.check (PropertyPermission.java)
     at com/ms/security/PolicyEngine.shallowCheck (PolicyEngine.java)
     at com/ms/security/PolicyEngine.checkCallersPermission (PolicyEngine.java)
     at com/ms/security/StandardSecurityManager.chk (StandardSecurityManager.java)
     at com/ms/security/StandardSecurityManager.checkPropertyAccess (StandardSecurityManager.java)
     at java/lang/System.getProperty (System.java)
     at weblogic/jndi/Environment.getProperty (Environment.java:598)
     at weblogic/jndi/Environment.getProviderRJVM (Environment.java:691)
     at weblogic/jndi/WLInitialContextFactoryDelegate.getInitialContext (WLInitialContextFactoryDelegate.java:166)
     at weblogic/jndi/Environment.getContext (Environment.java:122)
     at weblogic/jndi/Environment.getInitialContext (Environment.java:105)
     at weblogic/rmi/Naming.getContext (Naming.java:225)
     at weblogic/rmi/Naming.lookup (Naming.java:67)
     at examples/rmi/stock/StockApplet.init (StockApplet.java:127)
     at com/ms/applet/AppletPanel.securedCall0 (AppletPanel.java)
     at com/ms/applet/AppletPanel.securedCall (AppletPanel.java)
     at com/ms/applet/AppletPanel.processSentEvent (AppletPanel.java)
     at com/ms/applet/AppletPanel.processSentEvent (AppletPanel.java)
     at com/ms/applet/AppletPanel.run (AppletPanel.java)
     at java/lang/Thread.run (Thread.java)

Can you post the Stock Applet and other source files...
Jamal
([email protected])

Activate or switch device online not working

Im trying to switch to a second device and the Activate or Switch Device feature of My Verizon is not and has not been working for the past two weeks. It gets to the second screen that list options for backing up data and contacts. After that the next window does not load.
I have used three different computers, different networks, Firefox, IE7-9, and Chrome. Also cleared cache and cookies. Please help, thanks.

budone wrote:
Have you tried shutting off the active device first?????
Also have you tried shutting off the active device and calling *228 option 1 from the device you want to activate???
Is the 2nd device VZW branded and is the ESN clear?
Sure have. Both devices are Verizon branded with clean ESN numbers. *228 option 1 on the seconed unactivated device gives me "were sorry this device cannot be activated at this time." This is the last screen i see before i hit next. Next screen is blank and isnt even loading.

Upgrading online not working

I am trying to upgrade my two lines of service online. I tried for a few hours yesterday and also today. Every time I select the device that I want it gives me the option to BOGO for my other line of service. I want to take advantage of that offer, so I select yes and hit continue.
Then it loads the page to process the order and I get a PAGE CANNOT BE DISPLAYED message. How can I get this taken care of?

1. Clear cookies and cache and try again.
2. Try a different browser.
3. Call customer service and tell them the website isn't working; you will get the same deals available on the web. (800-922-0204)

Stock determination online not working

Similar Messages

Maybe you are looking for