Stock determination with multiple storage locations

Dear Friends,
Kindly suggest how to do the following configuration in Stock
Determination.
The scenario is
For example Unrestricted Stock existing for material " X":
Plant 4000: 10 Qty
Sloc1 -- 6 qty
Sloc2 -- 4 qty
There is sales order (only plant is specified in Sales Order, No sloc) for 7 Pcs when the stock determination process is carried out it is showing the stock available is 10 qty. But when they make the PGI it is picking only 6, ie., from SLOC1, but it is not picking the balance 1 qty from SLOC2 even
though the material is available.
The same problem exists for Production order also.
Thanks,
Regards.
Krishnan.

Hi Hari...
Make sure you have maintained the priority for sorting & the item table for the same.
Also in the No.Splits ( number of splits ) give a maximum possible value like 999.
The problem happening in ur case is, i think this fiels in blank in configuration . So system is stoping the quantity spliting, which will look for the series of S.Locns till the target quantity is reached.
Reward points if useful/solved.
Thanks
Mahesh

Similar Messages

Inspected stock posting to multiple storage location without batch

Hi,
At the time of Usage Decision, I want to post the inspected stock to multiple storage location i.e., Rejected Stock to Scrap Storage Location, Qualified Stock to Unrestricted Use Storage Location.
Quick response will be appreciated.
Anandkumar KS

The scrap line has no storage location since that stock is typically written off and scrap cost center is defined in configuration.
A possible alternative is to set up VMENGE08 and VMENGE09 with the same material movements you want to use. You obviously aren't using the 553 movement type as that writes off the material. That could give you two lines to use for your scraping. I can't remember if these stock posting lines give you the storage location option or not and I don't have a sandbox available to test today. If you need to post more then two grades in one inspection lot, you'll have to do the first two postings, save the UD, then come back in and do a second posting for the next two grades.
Read the configuration help file you'll find in confg for "Define Inventory Postings" under the QM config.
You can also change the displayed names of the stock posting lines. That's explained in the config file as well.
Craig

Stock determination finds deleted storage location

Hello gurus,
we are using stock determination in MIGO for goods receipts to automatically determine the correct storage location for delivered goods.
Now we deleted one storage location and moved all materials stored there to another one.
But still, for certain materials, the stock determination gives the old location. Then, when we try to post the receipt, there is (of course) an error because the storage location has been deleted.
We use only one very simple stock determination strategy with just one item:
Special stock indicator: F (unrestricted-use stock)
Priority indicator: 1
Any ideas, why the old location could be found?
Thanks
Alicia

Hi Jürgen,
no, I did not remove that item, because it was not even there in the first place.
As I wrote in my OP, there is only one item with
Special stock indicator: F (unrestricted-use stock)
Priority indicator: 1
The storage location is blank!
I never used stock determination before and I know it is normally used for goods issue only, but in this system, there definately is an button called "stock determination" in MIGO for goods receipts. And when I click on it, the system determines a storage location where the material is stored. This works perfectly, except for the materials with blocked locations.
Alicia

Stock report based on stock type with a storage location

Is there a standard SAP report that will give me the stock information based on the storage location and stock type (unrestricted, QI, blocked, etc?)...for instance if I want to find all QI stock in a certain plant/storage location? I want it to show a list of materials and their quantities, not on an individual basis as in MMBE.
Thanks!

Thanks again for your response. I've used your last mentioned method before but with MMBE you have to enter a material number. We want a report of all materials in a particular stock type.
I was able to achieve this by goign to MB52 and setting up a filter on a layout. My users can now select that filter on the selection screen to get the desired result.
Thanks again for you attempts to help!

Prod order with multiple storage loc

R/all
Can any one guide me? is it possible to create production order with multiple storage location?
plz help..
thx
Sumit

Dear Guruji
I have same problem But i want to create PR & PO for multiple storage location.
Thanks
pankaj

MF60 Multiple Storage Location Check

Hi Friends,
Could someone please tell me if it is possible for the Pull List (MF60) to look at multiple storage locations (say a staging location and a stock room)? If it possible then what config do I need to do?
I would really appreciate your help. Thanks
Regards,
JP

Hi Mahesh,
I have tried that already but I faced the following problems:
1) If there is a storage location assigned to the Material then when I run MF60 it only checks for the Material in the specified storage location even though I might have defined the stock determination strategy and defined the sequence for two storage locations in it.
2) if I dont assign any storage location to the material (in the marerial master, BOM or routing) then when I run MF60 it doesn't come up with anything even though I have defined the stock determination strategy and defined the sequence for two storage locations in it. My production order doesn't show an issue storage location for the components but in this case if I do a order confirmation, then it uses the stock determination strategy to issue the component using the sequence defined
I hope I have explained these problems clearly but please let me know if you need any further information. I really appreciate your help.
Thanks,
JP

Stock transfer between Plant/Storage location to Plant/Storage location

Dear Experts,
This is a MM component of SAP Retail.
We have 4 brands ( Plants of type B, Plants of type C etc) that needs inventory from the same Distribution center (Plant A) for some common products. Here the direction is to prioritize the inventory per brand. The requirement is one brand should not take the inventory of the other brand.
To overcome this problem , the solution proposed is to have different storage location for different brands in the same DC.
When we run replenishment planning for the brands and do a ATP check, the availability check should consider only the one issuing storage location in the DC which we allocated for the brand.
I do see the following set up in SPRO and I have done the following.
Step1: Activate Stock Transfer between Storage Locations SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> u2018Activate Stock transfer between storage locationsu2019
Step2: Assign Delivery Type and checking rule according to storage
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations->Assign Delivery Type and Checking Rule According to Storage
Step3: Define Shipping Data for Stock Transfer between Storage Locations
SPRO ->Material Management ->Purchasing ->Purchase Order ->set up stock transport order ->set up stock transport order between storage locations -> Define Shipping Data for Stock Transfers between Storage Locations 
Step4: Define Rule for Determination off Shipping Point SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations -> Set-up Storage-Location u2013dependent shipping point determination->Define rule for determination of shipping point
Step5: Shipping Point Assignment According to Storage Location
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> Set-up Storage-Location u2013dependent shipping point determination-> Assign Shipping Points According to Storage Location
Question.No:1- After completing the above set up in me21n, the issuing storage location field is greyed out. I am not able to enter any value here. Can you please help.
Question.No:2
I do see the following setting.
Under IMG ---> Material Management ---> Purchasing --> Purchase Order --> Set up Stock Transport Order -->Business Add-In for Determination of Issuing Storage Location
Display the IMPLEMENTATION
Double click on the method GET_SUPPLYING_SL
Click the Execute button
Click the detail button on IF_EX_MD_EXT_SUP
Execute GET_SUPPLYING_SL
There is a prerequisite for this BADI .I have done those things.What i dont understand is where to force the combination of supplying site/issuing stor.loc/receiving site/receiving stor.loc
Kindly provide your inputs.
Thanks,
Vasanthan

Dear,
Have You configure MRP in second plant (where you want to transport the Material).
Please try with this and do again Po for stock transport.
Regards
Piyush Patel

One Shipping Point for Multiple Storage Location

Hi
How to ship a sales order from Multiple storage location.The system is not accepting .Can any one tell us the missing portion ?
Thanks

We want to assign Shipping Point to Multiple Storage Location.It is all batch Managed ..The Material will available in two or three location.We don't want the stock to move to shipping location.We want to confirm at the time of creating sales order with the available location to one shipping point

HU in multiple storage location

Can HU resided in multiple storage location?? I'd like to know if it's possible to transfer partial qty of an HU into multiple storage location with the same plant/whse. Here is the scenario:
HU1234 has 100pcs in plant ABC 0001 whse 011 bin aa-001-c
Is the below possible or would I need to have unique HU ids for the other three HUs.
HU1234 25pc in plant plant ABC 0001 whse 011 bin aa-001-c
HU1234 25pc in plant plant ABC 0002 whse 011 bin aa-001-c
HU1234 25pc in plant plant ABC 0003 whse 011 bin aa-001-c
HU1234 25pc in plant plant ABC 0004 whse 011 bin aa-001-c

I also think I need to separte HUs but I just making sure I'm not missing something.
The business scenario is that we want to create a plant w/ mulitple storage location to move inventory in and out for specific key customers "Geo Hub" we are trying to avoid having to handle the HU and limit physical movement until we actually need to ship it out on an Outbound DN.
I know in our current enviroment we can only transfer a full HU via HUMO and if we want to transfer a partial HU we move it to repack and split it.

Determination of Issuing Storage Location in STO

Hi Gurus
How can we auto determine the issuing storage location in Stock Transport Order (STO)? If it is via user exit, could you please provide the user exit?
Appreciate yr help on this.
Thanks
Rgds..Sanjay

Had you gone to this node
Materials Management -
> Purchasing -
> Purchase Order -
> Set up Stock Transport Order -
> Set up Stock Transfer between Storage Location -
> Business Add In for Deterination of Issuing storage location.
See /ISDFPS/MD_EXT_SUP may be useful .

Good receipt against multiple storage location

Hello All,
I have a senereo where more than one project is going on. In my case there are 200 common materials
which are required for all the project. Every project is having their own storage locations.
I am creating PO for material containing the common reqt of all the project but at the time of good receipt
as usual it is going to only one storage location casue every material has only one storage location in material master.
Now please guide me is it possible to do the good receipt with multiple storgae location at one time itself?
Thanks in advance.
Shailesh

Hi Sandeep, (Please read without acct assignment please)
I must thanks u whole heardly as due to ur answere my big question got solved. Well i have add ur gmail id in to my freind list. I am sure u won't mind & u will help me in future too.
Well one more ques. i have .Can we create PO ( with out Acct assignment ) where we can put 2 diff. storage location for a single material. I mean insted of distributing the qty in migo level can we distribute this qty at PO level ?
2) Is there any thing provision in MM where we could delivery any notes against any PO to the good receipent at the time of MIGO. I require this as per the last case that at the time of migo , good recceptant can distribute the qty to differnt storage location but how can he come to know unless we inform him by means of any text notes in PO or is ther any other methode from which good receptient can know how much qty to be distribute?
Thanks in advance
Edited by: Shailesh Dulange on Apr 11, 2008 5:08 PM

Stock determination with Valuation type in WM

Hi SAP Gurus,
We have activated Split Valuation . There are two Valuation type for material FREMD_HALB for extern procument and EIGEN_HALB for in house production. Warehouse Managment is active.
We have stocks in our WM Storage Location 10 pc For EIGEN_HALB and 10 PC for FREMD_HALB
If we want to sale 5 pc form this material, we would first consume from FREMD_EIGEN Stock. Stock determination has been set correctly .
Plant              SDG             STDR
ZEKU     ZEKU     ZEKU
Sp                 Plant    Priority indicator Valuation type
F     ZEKU     1     FREMD_HALB
F     ZEKU     2     EIGEN_HALB
and Stock determination rule has been assigned.
But when we create a transport order by delivery It is always suggested by the system EIGEN_HALB Stock.
I have looked oss note and found OSS Note 365570 - Stock determination in LE-WM Note 365570
OSS NOTE says as Solution   u201EFor stock determination in Warehouse Management, the system does not take any pipeline stocks or valuation types into account.u201C
I would like to ask if there is a solution for this?
Should I use USER EXIT. If yes, can you give us the user exit name??
Thanks in Advance.
Best Regards,
Emre

Hi Jürgen,
Yes , I have tried WM Batch determination but it doesnt work.
I will try to implement a user exit.
Thanks a lot!
Best Regards,
Emre
Edited by: Y. Emre Kurnaz on Feb 2, 2010 5:49 PM

With out storage location in PO and VL31N is it possible to post GR wit 103

Hi There,
My scenario is once PO is created then create the inbound delivery in VL31N against PO,after that post the GR with movement type 103 once inspection is complete then reverse with m.type 105.
Here my question is in PO storage location is optional where as in VL31N with out storage location when post the GR system is giving error message that "document incomplete. You cannot post goods movement"
So I need solution without entering storage location in PO and VL31N system shouls allow to posr GR with m.type 103 and 105.
Appreciate you help.

You can post GR agains inbound delivery (IBD) in MIGO (A01-R04) - specify the inbound delivery number, enter movement type 103 then push enter.
In this case system does not ask for storage location, so w/o entering SLoc in the IBD you can post the GR.
Please also read OSS note 1225077 how to manage this scenario.
Regards,
Csaba

Stock Transfer between 2 Storage locations

Dear All
I want to configure Stock Transfer between 2 Storage locations.
I have activated the same in configuration but can anybody provoide complete details at to how the process happens.Is there any standard document type to be used like UB in case of stock tranasfer between plants,do we craete SD Delivery etc.
Regards
Vaibhav Mahajan
Edited by: Csaba Szommer on Aug 22, 2011 12:56 PM

Hi
Stock Transfer between 2 Storage locations,there is no seperate configuration needed( like stock transport order b/w plants doc type UB), just goto MIGO
There are 2 options are there for Stock Transfer between 2 Storage locations
1. one step procedure movement type 311(from unrestricted to unrestricted)
323(from quality to quality)
325(from blocked to blocked)
2. Two step procedure movement type 313 and 315(only possible from unrestricted to unrestricted stock)
During this transfer no accounting document will generate because you are transferrring the stock within the plant,
Thanks

Stock Transport order issueing storage location determination

Folks,
In case of a Stock transport order scenario in which plant A with SLOC1 delivery to plant B with SLOC 2. Is there any option how the issueing storage location can be determined? The delivering plant can be determined through the special procurement key but there is no option for the issueing SLOC.
Regards,
MdZ

Hey Karen!
I am not sure if I understand your problem correctly.
You do not want the system to create a new MARD entry when postin goods issue.
You can enable/ disable this function with transaction OMB3 in the customizing.
have fun
Flo

Stock determination with multiple storage locations

Similar Messages

Maybe you are looking for