Stock determnation for sales order stock

Hi all,
for our SAP retail solution - we have requirements for moving Consignment stock to Sales order stock for home delivery . Then Sales order stock needs to be withdrawn for inter company 643 movement . The stock determination is maintained as K first & then F with relevent settings in SPRO & article master, for consignment article -when sales order stock exist & delivery is created for intercompany PO with sales order on account assignment to transfer stock from Store to DC, SAP error message is not allowing to post Goods issue.
What settings do we need to maintain for this to happen to withdraw from Sales order stock for consignment article ? Any help or information is highly appreciable.
Thanks
Krish

Hi,
It seems in delivery in picking tab automatic storage location not determined.
If not determined Please do settings in SPRO>Logistics Execution>Shipping>Determine Picking Location>Assign Picking Locations.
Before doing above step whether the item category is relevant for picking or not ?
Hope this would help.
Regards,
JS

Similar Messages

Stock determination for sales order stock

Hi all,
for our SAP retail solution - we have requirements for moving Consignment stock to Sales order stock for home delivery . Then Sales order stock needs to be withdrawn for inter company 643 movement . The stock determination is maintained as K first & then F with relevent settings in SPRO & article master, for consignment article -when sales order stock exist & delivery is created for intercompany PO with sales order on account assignment to transfer stock from Store to DC, SAP error message is not allowing to post Goods issue.
What settings do we need to maintain for this to happen to withdraw from Sales order stock for consignment article ? Any help or information is highly appreciable.
Thanks
Krish

This is the error message :-
After calling stock determination, a quantity of 1.000 EA remains open
Message no. WRF_CONS013
Diagnosis
During consignment processing in SAP Retail, the system called stock determination in order to decide which stock category should be used to take material 000000001000009740. However, the stock determination routine did not find enough stock in the relevant stock categories (as defined in the strategy). A quantity of 1.000 EA remains open.
Please note that stock determination ignores the Negative Stocks Allowed setting.
Procedure
Check your stocks and settings for stock determination for material 000000001000009740 in plant 3001. Post stock transfers if necessary

STO for sales order stock

Hi All
If I am not mistaken, one cannot do a STO for special stock using 2 step transfer, however it is possible in a one step process.
I have made the setting in config to use a one step process, and it have been set up to use movement type 647.
I am trying to move Sales order stock from one plant to another plant, and want to maintain it as special stock.
I can get the process to create the delivery, however, when I try and post goods issue the delivery document, I get the following message.
MSSA-SABWE exceeded by 2 EA: CISCO1402 ZA30 1000 SALEABLE E
Cisco1402 is the material
ZA30 is the plant
1000 is the storage location
Saleable is the split valuation we using
E is the special stock indicator for sales order stock.
If anyone could please give me some direction.
Thanks

Hi
We are not using blocked stock at all in any of our processes.
My understanding is that movement type 647 will not look or put stock into blocked stock.
If I look at table MSSA, for that Sales order number and material number, it comes up with one entry. It has a quantity of 2 in unrestricted, Val. GR Blocked Stck is 0.
Should the quantity of 2 be appearing in there?
So the process followed thus far is:
Sales order raised
Preq auto created from SO
Preq converted to PO
GR for PO
STO created to move sales order stock from one plant to another
Delivery created,
cannot post goods issue.
Thanks

Requisitions for sale order stock

Requisitions for sale order stock that are generated directly from the
sales order are not passed to SRM but requisitions that are created
manually for sales order stock are passed to SRM.
Why is the sourcing of a requisition for sales order stock where the
requisition was created directly from the sales order not supported?

Hi,
We need same requirement, we found only PR's with item category "5"(Third party ) created from sales are transfered to SRM.( It is hard coaded in ECC).
Let us know if you are able to resolve your issue.
Thank you
Sreedhar Vetcha

Goods Receipt for sales order stock

Hi everybody,
I want to receive materials for sales order stock. what I did:
1- Created a Purchase order,
2- Account Assignment = C
3- went to MIGO
4- selected PO number
5- set movement type 101 / E
the SAP give error message that you have not planned 101 / E !!!!
I searched alot but couldn\t find the solution.

Hi Dear,
When you use C account assignment category, System will consume those materials/services for the respective sales order at the time goods receipt/service confirmation. There is no inventory possible when we use, account assignment C as a standard, If you want to make inventorize, we have to choose account assignment category M against sales order.
When we are procuring material against project, Account assignment Q-will be inventoried and P-will be consumed for respective cost object
Like the same M-will be inventoried and C--will be consumed for respective cost object
R,
Amala Srinivasa Rao

Create STO for sales order stock

Hi,
My client requirement is to move the sales order stock from one plant to another plant using STO. We have STO scenario for cost center, but we don't have for sales order stock.
Could anyone tell me about the missing config for sales order stock.
Thanks and regards
Durai

Hi Durai,
In the shipping data for plants change the DistChannelIB to Intercompnay OR cross plants for each of you plant.
Hope this helps!
Abhi.

Stock reserver for sales order

Dear All
1. MMBE-Check the stock with batch no 6000000340 with 200 qty
2. Sale Order Created-
3. MB1B - Used Movement type 412 E with Inputs such as Sales Order,[warning message: sales order is not provided for this goods movement] after pressing the document is posted
4. In MMBE When i check the stock under batch no 6000000340 with 150 qty in unrestricted stock and Sales order Stock i can see the 50 quantity stock
Query is
1. Why the 50 quantity stock which is reserved for Sales order stock is seen under unrestricted stock and not under Reserved tab
2. When i create delivery with the same material and batch no, the stock is reduced from unrestricted stock[150 -10delivery qty] = its showing 140 qty, but stock should be reduced from 50 quantity which i have reserved for Sales order.
Please guide
Regards
Sandeep Bhowmick

Hi Sandeep
Visualize this scenario
Material is pen in MMBE unrestricted stocks is 100
Sales order created with item cat TAN with special stock indicator E not marked and the order no is say 55 for 10 qty
Now you are reserving stocks in t code MB1B with movement type 412 E inputting the order no xx and saving it
Now in MMBE put the material as pen and input plant and storage location etc press F8
unrestricted stocks will be 90
Sales order stocks will be 10
If you click on the details of this sales order stocks you will see the order no xx and qty will be 10
(read your first post exactly the same of this)
now are delivering the sales order and doing the pgi
Now in MMBE
unrestricted stocks will be 80
Sales order stocks will be 10 (this exactly is your problem)
that means the system having a reservation in MMBE for a particular sales order xx not utilizing those stocks and still takes the stocks from the unrestricted and this is wrong
This is happening because the item cat TAN is not marked with special stock indicator E during order creation of xx
Now mark the item cat TAN with special stock indicator E and create a fresh cycle say order no yy
When you do PGI for order no yy the unrestricted will be 90 and there wont be any sales order stocks as the stocks are already PGIed
That means the system picks up the correct stocks for delivery
The system behaves very perfectly When there is sales order stocks in MMBE i dont understand ,what is the reservation you are talking about
Regards
Raja

Reason for rejection for sale order stock existing line item

Hi,
I am giving reason for rejection for a line item where there is already sale order stock. Then I am getting a warning message like " there is sale order stock assigned". I want this message to be as error message. Any customisation (SPRO) is there for this?
Kindly update.
Ratna

Dear Rama Rao
I think, there is no problem you can ignore the warning message and go ahead give reason of rejection and close the order
There wont be any problem absolutely
The reason of warning message is, (it is sales order created with item category with special stock indicator as E ) that means the system tells you that it is extra special stock which you have created and now you are trying to reject hence it alerts you by giving a warning message
The item category of the items which you are trying to reject is marked or should have been marked with special stock indicator (you can check that in VOV7)
By double clicking warning message if it is of V4 message class in t code OVAH you can make that as no message
But i doubt that this is available in OVAH
Regards
Raja

Availability check for sales order stock

Hi,
We use sales order stock in sales order which creates purchase requisition automatically.Movement types for GR 101E, for GI 601E. Material master data has on MRP2 view as GR processing time 2 days for example. I create sales order with requested delivery date today.After saving SO, PR is created and I create PO with delivery date today and post goods receipt document for today. System gives as confirmation date today + 2 days. although the material is in stock.
We use also project stock in sales order which creates purchase requisition automatically.Movement types for GR 101Q, for GI 601Q.I run the same scenario for the same material. As soon as I create the purchase order system confirms the open quantity in sales order for today. (Scope of availability check is the same for both sales orders and includes PO)
What can be the reason?
Thanks

Hi Murat,
i guess the problem is with the 'Check without RLT' indicator' in Availability check control. For the MTO (checking rule AE) i guess this indicator is not set but for the Project systems (Checking rule PS) this indicator is set. This makes the difference. Do the changes as desired in transaction OVZ9.
Please check and revert back if you are still facing the same problem.
regards,
Kathir

Difference between MMBE & MBBS report for sales order stock E

Hi,
What is the difference between MMBE & MBBE report bcoz we are getting difference in sales order stock in both reports.
Thanks in advance.
Regards
Basavraj Patil

Hi,
MBBS will give the STOCK OVERVIEW for specific sales order and specific Project
MMBE will give the stock at PLANT, STORAGE LOCATION, & At Special stock indicator level.
The sales order stocks will be same at both, You have to count the stock of sales order at all the Plants and Storage location level inorder to get the same stock of MBBS at the sales order level
Hope it is clear,
santosh

Subcontracting for Sales Order Stock and collective Transfer Posting

Dear Expert,
We have a scenario in subcontracting wherein the sales order the customer also wants to see the components and as such along with the Header item of subcontracting ,we also mention the components as another line item in the sane Sales Order.
Now from the sale sorder two Po's are created onr for the subcontractor and one for the compnens to be procured.
Since the components are procured on sales order stock there is noway we can issue it to the Vendor stock through Movt .Type 541.
As per SAP AG WE CAN:
"ubcontracting is also possible in conjunction with sales order stocks and project stocks. The subcontracting orders are account-assigned to a sales order or a WBS element. Thus, the components are not transferred (using a transfer posting) to the u201Cstock of material provided to vendoru201D but are directly withdrawn from the sales order stock or the project stock at the time of the goods receipt. The material manufactured is also posted to the sales order stock or to the project stock. The cost of subcontracting is then debited to the sales order or WBS element.Since the components are not transferred to the u201Cstock of material provided to vendoru201D, we recommend that you use a transfer posting to transfer the provided components to a new storage location (for example, 9999). This enables you to obtain an overview of those stocks that are physically located at the subcontractor.This information is particularly important when you carry out a physical inventory of the sales order stocks and project stocks."
But my query is that how many such storage locations will be created for the subcontracting vendors.
Secondly for the stock transfer from sales to storage location , we have lots of sales order, is dera way through which we can do bulk transfer rathar than clicking at new item everytime and then doing the transfer posting.
your expert advice shallbe helpful in resolving a longtime pending issue , waiting for the response.
Regards
Jabeen

This is a known issue, the system doesnt allow stock to have two special stock statuses at the same time.
Your concern of having to make multiple storage locations is valid (since this is a configuration).
I suggest you do the following
- Configure a warehouse and a single storage type (say 001). Allow mixing of materials in a single bin
- Assign this warehouse to a new storage location.
- Create a bin for every sales order number in the warehouse.
- When goods are moved to subcontractor, perform a transfer posting to the storage location, and perform a putaway to the respective bin. The putaway strategy can be tweaked using a user exit to go to the relevant bin. This way you do not have to enter the WM transaction for putaway.
- To consume the stocks, you can use 231E movement (MB1A). On the WM side, the picking strategy can be enhanced so that the picking TO is generated with the correct source bin. Make sure the GL account and CO objects are as per FICO requirements.
This way you can track the stocks binwise (bin level reports are available in WM), perform physical inventory and also consume the stocks from the relevant bin automatically.
We had faced the same situation, and we ended up not having sales order stock at all.
Hope this helps.
Regards,
Aroop

Posting of variances for purchase for sales order stock (Z)

Hello
I have an issue when posting invoices related to purchase order with item cat Z (valuated sales order stock). The material is a standard material with 'Price control' 'S'.
I would like the variances to follow the goods. If the goods are still on stock, the variance shall be posted to inventory instead of account for purchase variances.
Logic has to be the same as for production variances for materials with 'Price Control' 'V'.
Best regards
Søren

Hi
With price control S you can never achieve that, unless you have MaterialLedger in Place
You can not inventorize variances otherwise withPrice Control S
Regards
Ajay M

Stock reservation for Sales Order

Dear Friends,
My requirement is to reserve the stock for a particular sales order.
Material is Make to Stock.
I tried with transaction code MB1B/MB1C/MB1A with movement type 412E/561E/232E for a particular sales order.
If I view stock overview with transaction code MMBE,I can see the stock is reserved for a particular sales order.
Now when I am creating delivery for this reserved stock with reference to another sales order,delivery is created.Logically it should not happen.Delivery should create only with reference to particular sales order for which stock is reserved.
Here I checked OVZ9 and ensured tick is for include sales reqmts.
Special stock is blank for sales order item category.Transaction code is VOV7.
If I make the sales order item category as E and if I am trying to create a delivery for sales order for which stock is not reserved system does not allow to create delivery.
Please suggest me how to meet my requirement.I want to reserve the stock (Make to stock) only for particular sales order.
Thanks in advance.
Regards,
Shrikant

Dear santosh/Kapil,
Thank you very much for your immediate reply.
Santosh stock is getting reserved but still I can despatch this reserved stock against a sales order for which this stock is not reserved.
Details are as below,
Material---- ABC,Batch is xyz,batch quantity is 2 TO
Sales orders are 111,112,113,114 and so on.
Now as per your advise I have done the reservation for SO 111 for material ABC for batch xyz.
When I checked MMBE it shows that material ABC of batch is reserved but I could not see SO number here but yes in reservation I could see the sales order number.
Now I tried to create the delivery for SO 113 for which the batch xyz is not reserved it is reserved for SO 111.But still I could create delivery for SO 113 for batch xyz.
I mean batch xyz is reserved for SO 111.
Am I missing anything here.
Dear Kapil,
I do not want to reserve the entire order quantity of sales order.I mean only on few ocasions I want to reserve the stock.
I mean today I want to reserve partial quantity of sales order.
Regards,
Shrikant

Stock allocation for sales orders with batch job

Hi Friends
We have a batch job to allocate stock for sales orders which runs every week , currently this batch job is meant for plant 1000 with availability check procedure Z1 .
I need to incorporate for same batch job plant 1000 with availability check procedure Z2
Just I need to know that there is any potential impact and it causes any problem ?
Thanks In Advance
Rusheek

Hi,
Check what difference is between procedure Z1 and procedure Z2. As we cant see this, you will have to analyze what Z1 was doing and what Z2 is expected to do. Broadly speaking this is preety subjective to your project.
You analyze and try to find out the impacts. If needed take help of abaper.
Rgds,
SB

Stock booking for sales orders using APO gatp

Hello Experts,
We are having similar case as YR, for which I'm searching for a solution. > (Putting this in a separate thread so that I can reward points)
We have certain sales orders (which are created on portal) for which we need to book stocks. These orders have different ord type. We want to give priority to these sales orders against existing/upcoming stocks. (For these orders, no customer master exists, kind of one-time).
Requirement is - Portal orders are placed according to the updated stock on portal (frequent run programs). But at the time of actual delivery creation, it happens that no stock available for the order and existing stock 'robbed' by other sales orders/deliveries meanwhile. We want to give 'portal orders' more priority than other normal orders/STOs.
We have receipt elements in Purchase orders only and no production orders. Also, portal orders are not subjected for gatp check, once the order is saved, a sales order is triggered & created in ECC (XI/PI) against dedicated Plants/Warehouses.
We have gatp and trying to find solution for it. Could you please guide how to book stocks for these 'priority orders' against existing unrestricted-use stock & against upcoming purchase orders?
Thanks a lot!

Hello Babu,
Thanks for your inputs. I would like to get into more details of what you mentioned about delivery priority. In my case, any customer places online order on webportal (based on current stock on portal which we frequently update through programs) and once the order is saved, a Sales order is created in ECC for a "one time customer" (there are hardly 2-3 customers for the e-orders), for which gatp check happens and stock is assigned as per availability and delivery date is assigned. So basically issues are
1. Order in ECC should be placed with successful gatp check & confirmation - chances are of stealing stocks in between the 'time gap' of stock update on portal & order placing till order creation in ECC with gatp check >> for this we are working on stock update programs.
2. Once delivery date is assigned to the order after successful gatp check, during the time of delivery creation, there are other STOs which steal stocks & create outbound deliveries before the portal order. Here we want to stop the 'robbing'.
So looking at this aspect, could you please elaborate the point of -
"Since you have a different sales document type, why don't you assign a higher delivery priority to these orders during ATP check ? You can influence the default delivery priority that comes from customer master to a very high delivery priority just before the ATP check ( use field catalogue user exit ) and pass the high delivery priority to APO"
And how can we use field cataloguser exit?
And ya, we may not need ROC, as there will be no one ready to 'Donate' But thanks for highlighting the option as well..
Thanks

Stock determnation for sales order stock

Similar Messages

Maybe you are looking for