Stock for 0STOCKTYPE value # not shown

Hi experts,
I've got a little problem with showing stock with dimension stocktype.
I've created a query with the free dimension stocktype. When adding this to the rows all stocktypes but the empty ('#') are shown. The total shows the value including '#' data:
                                        Stock (Value)
     Plant      Stock Type                          EUR
     1101     Frei verwendbar               -25.190.984,26
             Gesperrt                 7.423.054,97
             Kundenkonsi frei ver          -181.952,48
             Transit                    34.243.952,30
     Total                                 23.680.941,04
Does anybody has an idea why # ist not shown?
Kindest,
Ralf

Hi,
Enable the Key and Text type for stock type and check if you get any values. Doesn't seem like you have given any restriction otherwise total will not addup.
Still you can check if you have put any global filter or any specific filter to Stock type if it is RKF?
Regards,
Durgesh.

Similar Messages

All master data values not shown in query selections

Hi
I have created a query on a BasisCube containing the InfoObject 0FUNC_AREA. I loaded data to 0FUNC_AREA and the cube.
I then created a query on the cube, in which I want to filter on 0FUNC_AREA. However, when I get the list of available values for 0FUNC_AREA not all the values in the master data is shown. It only shows 25 values out of 105.
As a default, the data shown is only the cube data, so I removed the tick in the checkbox: Show only InfoCube data. Still the same.
Then I went to the InfoObject and set the 'Query Def. Filter Value Selection' and 'Query Execution Filter Val. Selectn' equal to 'Values in Master Data'. Still the same.
Then I deleted the contents of the InfoCube. It still shows the original 25 values.
The really strange thing is, that when I go into the selection screen for 0FUNC_AREA in the BEx and limit the shown values to one of the values available in the master data but not shown in the list, it shows the text of the functional area in the limit summary window. But still when executing the limitation, it cannot find the value!!!
The problem is the same in LISTCUBE
I hope some of you can help we with this.
Thanks
/Karsten

Hi Hari
1) Reactivated the master data, said it was already active.
2) Could see a difference between the data contained in cube and the remaining data. Otherwise not.
I deleted cube and master data and reloaded, the problem still persists. I am beginning to suspect a bug in BW.
I have to determine whether I am going to live with it (as it isn't critical, just a nuisance) or create an OSS on it.
Thanks for all the input guys.
/Karsten

Depreciation value not shown under the tab 'posted value' in AW01N

Dear experts
I have in chart of depreciation US GAAP book(posted to G/L), local GAAP book(not posted), book to post difference of two GAAP(posted to G/L), and local tax book.
In AW01N, the ordinary depreciation value is shown correctly for all books in the first tab 'planned values',
But on the second tab 'posted values', depreciation value only shown for the US GAAP book.
I'm thinking it maybe relavant with posting to G/L or not, that means only book with posting to G/L is shown with deprecation value on the second tab.
But something strange is in another chart of deprecation, deprecation value is shown for US book, local book.
Could someone comment how to control deprecation value shown or not on the second tab by local book?
Best Regards,
Nicole

Hi,
If you would have mentioned it as a "area post in real time" it will show you in the aw01n. If not, it will not show. Because, the tab specifies the posted values which means how much depreciation posted to GL.
As you have put "area doesnot post" for the local book, it will not show the balance.
Thanks,
sravankumar

BEx variables restricted value not shown

Hello,
I have 2 variables defined and used in a query. I put both these characteristics as global filters.
When the query is run, a popup screen allows user to input these 2 variable values.
The navigation block in the worksheet shows only 1 of the 2 variables values entered by the user. That is, only the restricted value for one variable is shown. The other is not shown. The result is, however, correct.
Not sure why is it so. Hope to get some clues.
Thanks.
Regards,
Mirella Russo

Dear AVR,
Thanks for the reply.
I placed the period and year infoobjects restricted by their respective variables in the free characteristics area but still the filtered values are not showing, although the period and year characteristics for filtering are shown as normal in the navigation block.
I have several other reports also using the same period and year variables in free char or global filter section without such 'anomaly'.
I noted that this problem report has columns restricted also by period and year variables. In fact, the year variable is an offset of -1. Is the problem caused by this restriction?
I tried creating a new query of the same design. The problem is replicated.
I hope you can throw me some more clues.
Appreciate it very much.
Thank you.
Best regards,
Mirella Russo

J/v passed for TDS which not shown TDS Report

Sir,,
I faced problem regarding some TDS Like Interest,Salary, entry passed through which not shown in
Tds report.
I not aware about how to passed this type entry so which appeared in TDS report.
Pls give me a suggestion regarding above problem.

Hi,
Create one time vendor or dummy vendor for all expenses. Then assign w/h tax codes and post the TDS at the time of invoice or payment.
You will not get report if you directly pass a JV.
Regards,
Shaik

BI 7 list of variable values not shown in chagne variable values option.

Hi,
In BI7 queries i face a problem like the first time you execute a query it asks for selection options ,then the next time if we want to change the variables we have a option "change variable values" in the menu bar to change it,but unlike BW 3.5 it is not showing the entire list of values it shows only the history or the present values we choose,this restricts from selecting any desired values from the list.
Is there any way to resolve this problem,your suggestions will be really helpful.
Thanks,
G.Monica Roja Flora.

After you click on the box in the variable selection screen you will get another window "Select Values for XXXX". In the first box you will have a drop down box which will show "History", Favorites", "Single Values" & "Value rabges". Then in the bottom right there is a button "More" when you click on it it will open to show the selections already made.
Hope this helps.
Bhargava

CR2008 and SAP BW - Technical Values for variable values not displayable ?

Hello Experts,
we have the following constellation / problem:
- SAP Query BW 7.0 with variables
- a report built upon this query with Crystal Reports 2008
- now if we execute the report and try to fill in the parameters (= SAP BW variables), only the (SAP) description of each value is displayed
Since it is common for the business users to communicate with the key instead of the description (e.g. Project 50010001 instead of Project 'something etc something'), it is necessary for us to give them the opportunity from a list that contains the key (maybe as well as the description) instead of only the description. Is there a possibility in SAP BW or Crystal Reports 2008 to make that possible ?
I tried to do it in the infoobject, in the query, in the 'options'-section of Crystal Reports and in the properties of the parameter field itself, but to no avail.
Many thanks for your help in advance !
Frank

Hello Experts,
I facing a problem.
I have a crystal report based on a BW Query. It has one parameter called Country.
Eg:
Until now, in BW query country variable has the following values.
USA
JAPAN
GERMANY
Now, from this fiscal year we have the following values for country variable
USA
JAPAN
INDIA
GERMANY
UK
I am trying to edit the list of values for the country variable in crystal reports. It is not getting reflected in SAP BW. I also tried refreshing it several times.
Can any one Please help.!!
Regards
NMU

UDF for table CRD1 not shown in XL Reporter

Hi everyone,
I created an UDF under "Business Partners - Addresses" (for table CRD1), but in XL Reporter it is not in the UDF list.
Looks like XL Reporter only recognizes UDFs on the primary table level -- all UDFs built for "Business Partners" (OCRD) are in the list.
However, I have to put this UDF on CRD1 level since it's related to ship to zip codes.
How can I work around it?
Thanks.

Hi,
You have a correct assumption. Only UDF in OCRD will be available to XLR but not CRD1. For work around, you need to create UDF in marketing documents to get the UDF value from CRD1.
Thanks,
Gordon

Sapscript Passing parameter value not shown.

Hi all,
I am writing a sapscript form to call a subrountine by passing the hardcode parameter 'ZXX_TSI_SHIPMENTS_FROM' shown as below: -
PERFORM GET_STANDARD_TEXT IN PROGRAM ZPXX_SHIP_INST
USING 'ZXX_TSI_SHIPMENTS_FROM'
CHANGING &ZXX_TSI_SHIPMENTS_FROM&
ENDPERFORM
My problem now is when I debugged in program ZPXX_SHIP_INST, the passing parameter is empty.
Could someone help me?
Thanks in advance.

Hi.
In program ZPXX_SHIP_INST write like this.
FORM GET_STANDARD_TEXT TABLES in_tab STRUCTURE itcsy
                                                          out_tab STRUCTURE itcsy.
READ TABLE in_tab WITH KEY name = 'INVAR_1'
IF sy-subrc = c_zero.          "check for subrc
    lv_ebeln = in_tab-value.
ENDIF.
CALL FUNCTION 'READ_TEXT'
    EXPORTING
      client                  = sy-mandt
      id                      = p_lc_f01
      language                = sy-langu
      name                    = p_lv_ebeln
      object                  = text-t28        "EKKO
    TABLES
      lines                   = it_tline
    EXCEPTIONS
      id                      = 1
      language                = 2
      name                    = 3
      not_found               = 4
      object                  = 5
      reference_check         = 6
      wrong_access_to_archive = 7
      OTHERS                  = 8.
IF sy-subrc <> c_zero.        "checking for subrc
    "to avoid epc error
ENDIF.                        "IF sy-subrc <> c_zero
in it_tline[] u can get the text.
cocatenate this text into one variable and pass this to script.

Values not shown in F4IF_INT_TAB_VALUE_REQUEST

Hi All
I want to show the user the values from my itab at event at selection-screen on value-request on f1.I am passing following parameter to the FM
retfield , value_org ('S')
and tables
value_tab , return_tab.
Now the problem is though the itab passed i.e. value_tab is not empty, it is not showing the values just it is getting poped up thats all ?
Any clues ??
Thanks in anticipation
pM

Hi,
See this code
REPORT Z.
data: begin of inttab occurs 10,
          bukrs like t001-bukrs,
          butxt like t001-butxt,
          ort01 like t001-ort01,
      end of inttab,
      ret_tab like DDSHRETVAL occurs 0 with header line.
start-of-selection.
select bukrs butxt ort01 from t001 into table inttab.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    DDIC_STRUCTURE         = ' '
      RETFIELD               = 'BUKRS'
    PVALKEY                = ' '
    DYNPPROG               = ' '
    DYNPNR                 = ' '
    DYNPROFIELD            = ' '
    STEPL                  = 0
      WINDOW_TITLE           = 'Select Company Code'
      VALUE                  = 'S*'
      VALUE_ORG              = 'S'
    MULTIPLE_CHOICE        = ' '
    DISPLAY                = ' '
    CALLBACK_PROGRAM       = ' '
    CALLBACK_FORM          = ' '
    TABLES
      VALUE_TAB              = inttab
    FIELD_TAB              =
      RETURN_TAB             = ret_tab
    DYNPFLD_MAPPING        =
    EXCEPTIONS
      PARAMETER_ERROR        = 1
      NO_VALUES_FOUND        = 2
      OTHERS                 = 3.
IF SY-SUBRC <> 0.
    write: / 'Error =', sy-subrc.
else.
    loop at ret_tab.
      write ret_tab-fieldval.
    endloop.
ENDIF.
end of code
Thanks & Reagrds,
Judith.

SED and ECS value not shown in capture excise invoice

Dear All,
During MIGO, in the excise Invoice tab, the value for SED and ECS remain blank after capturing the Excise invoice. all the relevant conditions are maintained. what must be missing? please guide.
Regards,
Jay

Hi,
Her you need to check few settings
1.SPRO->Img ->Logistics - General->Tax on Goods Movements->India ->Basic Settings -> Maintain Excise Registrations
here make sure you have activated SED for your Excise registration
2.You have maintained excise defaults in
SPRO->Img ->Logistics - General->Tax on Goods Movements->India ->Basic Settings ->Determination of Excise Duty ->Maintain Excise Defaults
here maintain all entries for SED condition(JSOP)) ,SED set off(JSX1) same for Ecess for your tax procedure
3. Finally you have maintained A/P Set Off conditions for those SED (like JSX1) and for ECS set off in PO with 100%

Requirements for few periods not shown in MD04

PIRs for a materials are not flowing to MD04 list for 04 and 05 periods, it is not showing any PIRs in MD04 though we create requirements in MD62 for these periods, but from 06 onwards it is showing PIRs properly.Can you Please let me know where should we check to get the cause for this error?

Veesh,
Are the Versions for the period 04 & 05 same as Period 06. Please not only active Version of the PIR would be displayed in MD04.
Regards,
Prasobh

Why Are Textures for 3D Layers Not Shown at their Highest Resolution?

Textures shown for objects on 3d layers aren't being rendered at their highest resolution in the viewport. Is there any information on how to fix this? Here is a screenshot:
CC is noticably fuzzier.

This depends on your graphics hardware's capabilities, the driver settings and the image aspect ratio. if you hardware is unable to retain the full resolution, it will simply downsample the texture... In any case, without some proper technikcal info nobody can tell you more than that.
Mylenium

Outlook 2013 with Exchange Server - Changed custom form for contacts is not shown

Hello,
Our infrastructure:
Exchange Server 2010
Outlook 2010
Outlook 2013
Windows 7 Pro, Windows 8 Pro and Windows 8.1 Pro
The situation:
We've used an old custom form for contacts, worked perfectly fine
I've updated the form (adding some new custom fields and checkboxes) using Outlook 2013 and publishing the form (with a new name) to the Exchange folder
I've set the form as default form in our contacts folder
I've used this Script to set the new form for the existing contacts and the name of the new form is saved correctly
BUT if I open a contact in our Exchange contacts folder, Outlook 2013 (Outlook 2010) still shows the old form
Steps I've taken so far:
Cleared Outlook forms cache
Repeated the above steps 1-4 in Outlook 2010
Switched Cached Exchange Mode off and back on
Allowed Scripts in Trust Center Settings
Used a new clean Windows installation with a new Outlook 2013 installation
Used different Exchange users on different systems, but some behavior when opening contacts
I'm out of options I can think of, so maybe somebody else has some new view on this problem.
Thank you very much in advance!
Greetings,
Karl

Hi,
Is the Exchange folder in which the custom form is published available to all users?
From the description, the script used to work for the old custom form, correct? Which version of Outlook did you use with the old custom contact form? Outlook 2010/Outlook 2013 or an earlier version? If you used the script with an earlier version of Outlook,
we can't make sure it will still work with Outlook 2010/Outlook 2013.
In addition we may also try creating a new contact form and test the steps to see if it will work.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

No data source - OLE DB provider for ODBC is not shown in import and export wizard

Dear Sirs,
Would you please let me know how to activate the OLE DB provider for ODBC in import and export wizard?
Now I could use .NET framework for odbc only but it seems have problem in mapping table fields.
Please advise.
Thanks & Regards,
Clara

see this
http://msdn.microsoft.com/en-us/library/windows/desktop/ms712975(v=vs.85).aspx
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Stock for 0STOCKTYPE value # not shown

Similar Messages

Maybe you are looking for