Stock for required data does not exist during repack of product

Hello,
I have the given situation, during the packing of a product (which is unpacked) in the Work Center I get the following error message:
"Stock for required data does not exist
Message no. /SCWM/L3104"
After a debugging session we have found the cause as being the field FLGAVQ (Indicator: Handling Unit Contains an Available Quantity) in the structure /SCWM/S_HUHDR_INT. My question is if somebody knows from where this mark comes and if you stumbled on the same problem and if so how did you manage?
All the best,
Claudiu Maxim

Hello Sridhar,
Thanks for the response, the packing operation in our case is done in the SCM EWM environment in the specific Work Center. The transaction with which we pack is /SCWM/PACK - Packing - General. Do you have a solution for this problem with regards to the EWM environment?
All the best,
Claudiu Maxim

Similar Messages

  • Number range object for characterstic DATE does not exist

    When I am trying to load data from ODS to cube getting below error message.
    "Number range object for characterstic ZEXTDATE(Source extract date) does not exist".
    In update rules we are trying to convert this date Infoobject(Char) into Key figure.
    If anyone had exp with similar issue please reply.
    Thanks in advance
    Vani

    Hi Vani,
    Is ZEXTDATE Characteristic have any data in it? Can you check once.
    Veerendra.

  • Data folder can not be opened in finding " AirPort Time Capsule " The operation can not be completed because the original item for " data" does not exist .

    Hi
    I have a " AirPort Time Capsule " (firmware 7.7.3) When I try to open the data folder in "finder". Then I got the message  " The operation can not be completed because the original item for " data" does not exist". I have a lot of data and I can understand why I get this message?
    Anyone who can help? Thanks..
    Br. Bo

    Get a USB drive of 2TB or more.. assuming your TC is 2TB. Either preformatted Mac or plug into your Mac and format it standard Mac OS Extended Journaled in disk utility.
    Do a full archive of the TC. You do this using airport utility. Do not click the erase disk.. I marked in green.. just the archive.. that is to backup the internal disk to the USB disk. It is not fast.. take it that the process will go at around 40-50GB/hr.
    Once you complete the archive .. it is a direct image of the data on your TC.. you can then plug it into your computer directly.. and then try and open the files you lost.. if you cannot open them.. open disk utility and fix the permissions.
    http://osxdaily.com/2015/01/13/repair-disk-permissions-mac-os-x/
    Or try the methods apple recommends..
    OS X Yosemite: Set permissions for items on your Mac
    It is possible to fix things on the USB drive because it is locally mounted.. but you cannot fix it on TC which is network drive.

  • The file required for contribute compatibility does not exist on the server

    Hi, when connecting to a server in Dreamweaver that is set up
    for Contribute I keep getting this message when putting files:
    quote:
    The file required for contribute compatibility does not exist
    on the server. Would you like to turn off Contribute compatibility?
    I see the post from jonbradley below, but the solution
    suggested doesn't help me:
    Does anyone have any idea what this means and how to stop it
    from displaying?
    Thanks in anticipation...
    Simon

    Did you search the forum on compatibility?
    http://www.adobe.com/cfusion/webforums/forum/searchresults.cfm?requesttimeout=500&cate gory=290&forumid=55&FTVAR_KEYWORD1FRM=compatibility&FTVAR_SEARCHWHATFRM=c& FTVAR_RESULTTYPE=topics&FTVAR_AUTHORFRM=&FTVAR_TABLECHOICEFRM=current&FTVAR_CA TEGORYIDFRM=290&Selection=false&FTVAR_DATESELFRM=Select&FTVAR_STARTDATEFRM=&am p;FTVAR_ENDDATEFRM=&cal_d1=0&cal_d2=0

  • Error "Account assignment 00 for  purchase document does not exist " when u

    Hai,
    I am encountering the following problem when posting a PO based Invoice using BAPI_INCOMINGINVOICE_CREATE.
    The error says " account assignment 00 for purchasing document does not exist".
    The scenario is very simple.  I need to raise an Invoice against a PO. the PO has a single line item of quantity 10 net price 10.  Tax code is U2 ( 7% tax).
    I am passing the following at header level.
    Invoice_indicator ( as 'X'),company code,doc date , posting date, gross amount (107, currency USD, calc tax indicator as 'X'.
    At line item i am passing Invoice document item 000001, po number , po item number, tax code(U2) item amount (100),
    Does this error has got any thing to relate configuration matters?
    Regards,
    Upender

    Hi Upender,
    In some cases, depending on the type of PO / Posting,
    you might have to populate the accounting data itab and pass in the BAPI parameter.
    you can select the accounting data from EKKN for the PO.
    Again it depends on the PO category, wether you need to populate Qty & Unit in accounting data.
    Further, the accounting data should be exactly the same as there in EKKN ( all the fields except Qty & Unit ).
    Thanks,
    Ram

  • Error: Number range  for object RESB does not exist

    Hi
    I'm trying to convert a planned order (to purch requisition) partially via trxn code MD04. Upon saving I get the above error msg. The complete text of msg is as  follows. I've maitained the number ranges of all the objects specified in this error msg. Can somebody explain on how to overcome this problem?
    Many thanks
    BE
    Error Msg Text:
    Number range  for object RESB does not exist
         Message no. 61501
    Diagnosis
         The system cannot create a document for an MRP element if no number
         range or interval has been maintained in Customizing of MRP or if t
         number range you have maintained is not allowed.
         Below is a list of MRP elements that are affected:
         Number range object  MRP element
         PLAF                 planned order (operative oder simulative)
         EBAN                 purchase requisition
         RESB                 dependent requirements
         MDSM                 simulative dependent reqmts (long-term plannin
         MDTB                 MRP list
    Procedure
         Check the number ranges in Customizing. If you do not have the necessa
         authorization, please get in touch with your systems administration.

    Hi
    Thanks for the reply. But I have maintained the number ranges for matl. reservations/dependant requirements at OMI2. Here is the screen shot..Do find anything wrong with it? Pl advice.
    NR Object                             MRES/DREQ
    No.                          From Number            To Number          Curr Number          Ext
    01                           0000000001               8999999999           380                    blank
    02                           9000000000               9500000000           blank                  checked
    RB                          9500000001               9999999999           blank                  checked
    Number ranges for the plants are assigned to 01 (0000000001 to 8999999999).
    thanks
    BE
    Edited by: Brian Elfie on Jan 10, 2008 11:27 AM

  • ORA-15001: diskgroup "DATA" does not exist or is not mounted in 11gR2

    Dear all,
    the system is HP-UX 11.31
    the new RAC infrastructure is 11gR2 11.2.0.2 (2nodes using ASM)
    i am restoring the 10G 10.2.0.4 database to this infrastructure
    copy binary files over to new oracle home,
    relink all binaries with option rac_off
    --startup nomount
    --restore controlfile
    --mount database
    --catalog the restore files
    then run restore
    run {
    restore database ;
    recover database;
    i always get this error, i did not see this error in 11gR1( restore few times to 11gR1)
    verified the diskgroup DATA and i was mounted
    ORA-19504: failed to create file "+DATA/OCP/data1.dbf"
    ORA-17502: ksfdcre:3 Failed to create file +DATA/OCP/data1.dbf
    ORA-15001: diskgroup "DATA" does not exist or is not mounted
    ORA-15077: could not locate ASM instance serving a required diskgroup
    ORA-29701: unable to connect to Cluster Manager
    Please give me an advice.
    Thanks,

    found this note in Metalink and it had solved my issue.
    Unable To Create 10.1 or 10.2 or 11.1(< 11gR2) ASM RAC Databases (ORA-29702) Using Brand New 11gR2 Grid Infrastructure Installation . [ID 946332.1]

  • Number range  for object MDTB does not exist - Message no. 61501

    Hi All ,
      I have done the necessary configurations in PP say
    Order Type
    Order Type Dependent Parameters
    Scheduling parameters for planned & production order
    Confirmation parameters
    Availabilty check etc
    and iam able to create planned & production order and confirma the production order.
    I want to configure for MRP: -
    Settings done are
    Have activeted planning file entry for all plants.
    When i run MRP system throws a error <b>Number range  for object MDTB does not exist - Message no.61501 </b>
    Is there anything to do with plant parameters OPPQ and Mrp Group OPPR.
    I just tried plant parameters,standard 0001 is not available for copying.
    Suggest me how to proceed to set MRP.
    Shankar

    Hi shankar
      it is a good practice while creating the plant copying the plant from the standard plant so that all the standard table enteries will be copied  for the plant as the standard plant is not there youcan think of copying from any other plant similar to your plant which has the required entry. else
    in SE16N  check the NRIV table for the Object MDTB. if enteris found then make the table entry with the help of abaper.
    hope this helps
    regards
    SK

  • Number range  for object BANF does not exist

    Hi Guru's
    I have been trying to convert the Planned orders to Purchase requisition and unfortunately the system consistantly giving me the error as reflected below  despite changing the numbering range on the affectred documents. Please help.
    Number range  for object BANF does not exist
    Message no. 61501
    Diagnosis
    The system cannot create a document for an MRP element if no number range or interval has been maintained in Customizing of MRP or if the number range you have maintained is not allowed.
    Below is a list of MRP elements that are affected:
    Number range object MRP element
    PLAF planned order (operative oder simulative)
    EBAN purchase requisition
    RESB dependent requirements
    MDSM simulative dependent reqmts (long-term planning)
    MDTB MRP list

    Hello,
    You can define number range for Purchase requistions in OMH7 transaction agaist each number range number and you assign can assign these number range number to your purchase requistion document types in SPRP >> Materials management >> Purchasing >> Purchase requistion >>Define doucment type.
    E.g for NB doc type number range number is 20
    and in OMH7 number range number 20  has interval from- 2000000000 to 2099999999
    same way
    for RV doc type number range number is 21
    and in OMH7 number range number 21  has interval from- 2100000000 to 2199999999
    Regards,
    Shailesh

  • I cannot update or install updates on itunes. It says that the location for that file does not exist. I cant even uninstall itunes as the same error message comes up.

    I cannot update or install updates on itunes. It says that the location for that file does not exist. I cant even uninstall itunes as the same error message comes up.

    Hi vindog60,
    Thank you for using Apple Support Communities.
    To troubleshoot this issue where you get an installation error with iTunes on your Windows PC, please follow the steps in the article linked to below.
    Issues installing iTunes for Windows - Apple Support
    Cheers,
    Alex H.

  • The bp id for org unit does not exist

    Dear expert,
    after transport the org structure from dev to qty system , we found the bp id for org unit does not exist in qty system.
    in ppoma_crm, we can see there is a bp id assigned to the org unit. however, when use tcode 'bp' to check the bp id, the system can not fould a valid id.
    what can we do to solve the issue?
    will there any impact if we keep no bp id for the org unit?

    Hi,
    You can use the transaction CRM_OM_BP_INTEGRATE.
    Select the Org unit and enter the org id in the input field and execute it.
    Select the org unit from the result list and click on the button Start Repair. This will create a BP without errors for the respective org unit.
    Regards,
    PP

  • HT1688 why do i have to reauthorize a computer that was already authorized, the computer i purchased some songs on does not exist anymore, and the email for that account does not exist anymore.

    why do i have to reauthorize a computer that was already authorized, the computer i purchased some songs on does not exist anymore, and the email for that account does not exist anymore. i can reset password because i doent know what the old one was

    Hi lgmmo,
    I think your best best to get this resolved is to contact Adobe Customer Care. Here's the contact info: Contact Customer Care.
    A quick Chat session should get you fixed up.
    Please let us know if you have additional questions.
    Best,
    Sara

  • Error: Bank N.A. for country IN does not exist"

    Hello Gurus,
    When i am monitering Bdoc messages in Tcode:SMW01 ,there is an error message as"Bank N.A. for country IN does not exist"
    So please help me to solve this problem.
    Thnks in adv,
    Divya.

    Hello Gregor ,
         I didn't do Initial Download of the Customizing DNL_CUST_BNKA in Transaction R3AS.
    Regards,
    divya

  • Hierarchy for material types does not exist

    Hi,
    I am doing an intial configuration in SRM 7.0 we have actvated extended classic and PPS activated.
    In the first level of configuration ai heve set up the logical systems and the system landscape.
    when i am in R3AS
    DNL_CUST_BASIS3
    DNL_CUST_PROD0
    DNL_CUST_PROD1
    DNL_CUST_SRVMAS
    the above objects wre green when i executed
    For the object MATERIAL
    I am getting an error
    Hierarchy for material types does not exist
    Message no. COM_PRODUCT_API000
    Diagnosis
    Before materials are imported from the ERP system, the material types from the ERP system must exist as categories in CRM/EBP. When the Customizing object DNL_CUST_PROD1 is imported, the material types are imported automatically and created under the category MAT in the category hierarchy R3PRODSTYP (product subtype).
    Procedure
    Check whether the ERP system material types have been imported successfully and exist as categories.
    Proceed
    If necessary, import the Customizing object DNL_CUST_PROD1.
    Kindly guide me

    Hi,
    It looks you have not configured the middleware basic settings. Queue should be registered in SMQR transaction.
    Please follow the configuration guides in SAP Solution Manager or offline downloaded version in SAP Service Marketplace.
    http://service.sap.com/srm-inst
    Regards,
    Masa

  • Error while PGI... Special stock 2010 Q  for this mat. does not exist

    Hi friends,
    While PGI system is showing error that particular material, and wbs element special stock Q in sloc 2010 stock does not exist.....
    But stock is present.....
    I hve checked all relevant things reg..... stock and reservation...
    We are facing this issue for PGI for free of charge.........
    Plz. help......
    Thanks
    Navin

    Hi,
    Please check in MB52 whether the stock of your material belongs to special stock 'Q' + relevant WBS_ID. If your stock level is high enough but the goods are not under the WBS' special stock you cannot post goods isue I guess...
    Csaba
    Edited by: Csaba Szommer on Jun 9, 2008 5:13 PM

Maybe you are looking for