Stock from block to quality after UD

Dear Team
We want to bring back stock from block to quality and UD is done and we can not do it through mb1b and movement type 349 because QM is activated in material, please help?
Regards
Ramesh kumar

Hi Ramesh,
   I suggest you to go through the below documents. It might be helpful to you in solving the issue.
https://scn.sap.com/docs/DOC-51243
Reversal of Usage Decision and Stock Posting of Inspection Lot
Regards
Kalyan

Similar Messages

  • Returns sale order stock from returns to quality error

    Dear All,
    For FG Material we have activated Inspection Type '06' - Returns from Customer Inspection and Inspection Plan with Usage 'Goods Issue 06' also created.
    We create return sale order material comes in returns and we need Inspection lot with '06'. so in MB1B using mvt type 457 trying to move stocks from returns to quality but system is not allowing to transfer stock it gives error Change Inspection stock in QM only.
    kindly give your suggestion for this error.
    Regards,
    sakthivel

    For FG Material we have activated Inspection Type '06' - Returns from Customer Inspection and Inspection Plan with Usage 'Goods Issue 06' also created.
    SAP has returns set up to create 06 inspection lots. These are not stock relevant. In this case the inventory goes into the return stock category and another move must be done to move the material to unrestricted or blocked as needed it will not allow to move to QI
    If the material should go into QI stock and be under QI control, then config must be changed to use the 05 inspection type instead of 06.
    We create return sale order material comes in returns and we need Inspection lot with '06'. so in MB1B using mvt type 457 trying to move stocks from returns to quality but system is not allowing to transfer stock it gives error Change Inspection stock in QM only.
    In SPRO SD schedule line category for returns(DN) change movement type to 655 and make relevant settings for QM movement types.
    Check below relevant thread for more information
    sales return
    Cheers
    KK

  • Move stock from block to inspectin

    HI, i have to move stock from block to inspection, i have tried Mov 349 but it 's giving error 
    Change the inspection stock of material 6520330201524 in QM only Message no. QA495  Diagnosis You want to make a stock posting to/from the inspection stock. This is not allowed for material 6520330201524 because the quality inspection control has been activated by QM.  The following cases can occur:  The inspection stock should be increased, although an inspection is not foreseen for the current goods movement The inspection stock should be released, although  you can only do this using the QM transactions.

    Sandeep,
    There are many posts here in the forum regarding this topic. I even posted a few myself a couple of years ago. Search them out you'll see there're many ways material can and will be moved into QI, Blocked and Res. intentionally and unintentionally. QM activated negates all the MM and MB Txs. Search them out.
    One of several ways this can be done is to:
    1. Revise the batch classification/specs. MSC2n
    2. Reversing the transaction which put the material in Block, QI, Res. in the first place via MBST if 
    you've the auth.
    3. (Otherwise) Have the creator of the material doc.perform #2 above 
    Hope it helps.
    V.  

  • Movement of stock from shopfloor to quality inspection stock.

    Hi
    when i am using automatic goods recipt for my production order order. when i confirm last operation the finished product will be recipted to the unrestricted stock of specefied storage location.
    but what i want to do is. I want to move it in to blocked stock .
    I have an option in the goods recipt tab of production order.its defaulting as unrestricted use stock.
    well i can change it to blocked stock.
    how can i default it. instead of changing it  in every production order.

    Dear Deepu,
    1. Now if u want to place the stock from unrestricted to blocked stock use MB1B transaction with 344 mov type
    2. suppose if u want for perticular production order stock u want move directly to blocked stock do the following settings in order. Go to order change in CO02 click on Goods receipt tab>in control column> stock type select to blocked stock or quality stock. By default it will be unrestricted.
    3. Suppose if u want all the GR to order should got quality stock, in the material master eanble inspection type 04 for that materail and maintain quality plan for tha material in QP01
    i hope u r clear
    sree

  • Automatically Transfer from unrestricted to quality after oneyear

    Hi expert
    i have requirement that after every one year from the GRN i want the materiel goes to quality check automatically. now i am doing manually by Movement type 322.
    regard
    nabil

    QA07 can do this job. Precondition is either a shelf life date or a recurring inspection method in material master

  • Nullify the stock from Blocked Stock.

    Hi,
    I want to nullify the stock for a materials which is lying in blocked stock. The base unit of measurement for that material lying in blocked stock is 0 Ea but the parallel unit of measurement is 3.16 KG.
    Please guide how to nullify the stock for parallel unit of measurement of the material.

    Hi,
    Please check the below things.
    1. Check the material master whetner a conversion is maintained for EA and KG.
    2. You can try post the MI10 document for the blocked stock in the parallel unit.
    3.Or you can transfer post to the unrestricted and post a MI10 document or a scrap moment.
    4. with all the above trials if you find the error message no stock is available , then we can say that stock inconsistancy is there.
    5.Then check MM03 stock MMBE stock and MC.9 stock , if there is a variation then it is a inconsistancy.
    6.Check MB5b FOR the wrong posting.
    If there is a inconsistancy in the tables stock raise a OSS message or apply a sap note.
    Check for note on the service.sap.com
    Regards,

  • QM - WM : How to change stock from Unrestricted to Quality

    Hello,
    I am working for the first time on a Project with both WM and QM and facing an issue : for a certain material, there was some stock in Quality - I released it using a Posting change via LQ02 Transaction and movement 321 (worked fine in WM and IM)
    I am now able to create the QM view to activate QM in case of customer returns...
    I now would like to put back this stock to Quality : I am using again LQ02 with movement 322 as IM and WM Movements have been linked in customizing...It doesn't work as I receive the message : *u201CChange the inspection stock of material *** in QM onlyu201D.*
    Can any one explain me how to proceed to put back this stock to Quality as I only removed it to create the missing QM view and activate the inspection type.
    I have no clue about QM but I checked in Customizing and it seems movemnet 322 is not relevant for QM so I don't understand this error message....
    Thanks,
    KAK

    the following thread may help u:
    INSPECTION LOT
    regards,
    indranil

  • Help on transferring goods from blocked to sales order stock

    Hi Gurus
    i need your help in this urgent production issue here is the details
    our scenario is make to stock, when delivering and shipping against sales order, the user had some issues in t-code VL10H,
    so user only physically finished the delivery and shipped it, but did not execute it in SAP,
    so the user has put the stock in blocked status against these sales orders.
    can you help me in moving this stock from blocked status and issue against the sales orders in SAP so that we can perform delivery in SAP. and close the sales orders
    appreciate if you can explain the details steps and movement types and t-codes
    thanks a lot in advance for your help and replies

    Chakri,
    You need to read the book on R/3 System SAP Strategies guide to MRP Planning and also Product Costing let me know if you need any help on this.
    Saleem
    Edited by: SYED SALEEM on Mar 9, 2008 6:05 PM

  • How to transfer material from blocked stock  to scrap location

    Dear Experts,
        Weu2019ve put some of raw material into blocked stock. Now we want to scrap these materials & for that Iu2019m trying to take it to unrestricted stock from blocked stock by MIGO (transfer posting ,Mvt type=343).
    But during that system shows an error message that u201CBest before/SLED of batch has been exceededu201D
    Due to this Iu2019m not able to scrap the material from blocked stock.
    Pls advise what to do .Is there some other way to do it??
    Thanks in advance

    Hi,
    You can directly scrap it from Blocked stock using movement type 555 . Further from the message it is observed that SLED( Self Life Expiration Date ) check is active for this material in material master . Try to scrap it in 555 mvt .
    Dhruba
    Edited by: Dhruba Charan Behera on May 18, 2011 12:51 PM

  • Movement of material from Unrestricted to Quality at sub contractor

    Hi Expert,
    I am looking for a way to move stock from Unrestricted to Quality for stock that is stored at a vendor (sub contractor)?
    Have you got any advice?

    Hi Anders,
    Is your wish to move your goods from unrestricted special stock at SC vendor to QI special stock at SC vendor?
    In this case you may have solution, please check transaction MB1B + relevant movement type (sorrowfully I cannot check 'cause I have no access to SAP now). Please take care of choosing proper movement type with special stock category 'O'.
    http://help.sap.com/saphelp_46c/helpdata/en/4d/2b909643ad11d189410000e829fbbd/frameset.htm
    BR
    Csaba

  • Unable to return vendor consign. to stock from delivery - LT0G

    Dear All,
    Unable to return vendor consignment  to stock from delivery using VL0G after performing Goods Movement  Reversal using TCode VL09 for Stock Transfer Order/Special Stock Consignment/Outbound Delivery
    Parameters:
    Stock Transfer Order from DC to Site - Vendor Consignment Inventory
    Reverse PGI - VL09
    Select Outbound Delivery - Item locked
    Message no. L1618 - Return storage for delivery is not possible when IM is active
    Your help will be greatly appreciated.
    Gaetan

    You can use the following:
    - stock can be moved from 916 to normal bin by LT01 / LT10
    AND
    - control message VL019 in OVM1 and VL173 as per OSS note 521409
    AND
    - delete the delivery item by setting the delivery qty to 0
    AND
    - create new delivery item
    Recreating the item and do the picking again. I received this answer from OSS.
    Regards,
    Csaba
    Edited by: Csaba Szommer on Sep 16, 2009 7:37 PM

  • Able to post Invoice for Blocked stock from quality

    Hi
    I did GR for material against PO for 50 pcs, During QA32 stock posting i posted 30 pcs to Unres. stock(101) and 20 pieces to blocked stock(350) storage locations.
    Now when I am trying to  create  MIRO invoice verification, I am getting all the 50 pcs and available to post also for the entire quantity. How the system is allowing me to carryout Invoice verification for the blocked stock 20 pcs also ???
    It should allow me to process the 30 pcs only which are in unres. stock .
    How do I block the blocked stock from getting invoiced ?
    Please help
    Thanks
    Samuel

    Dear Jurgen
    Thanks for the reply,  master does contain the control key, I also have the inpsection set_up for the materials. During PO in delivery tab at item level I am getting stock type as Quality Inspection. During GR, lot is getting generated and we are able to Stock post it using QA11. Every thing works fine till the stock is there in Quality till the run of Txn QA11. But once stock is out of quality we are having the issue for the stock posted to blocked, I can understand MIRO picking up Unrestricted Quantity of the Lot but why it is also picking the quantity posted to blocked stock as we do not want to pay the vendor for this stock quanitity till we clear it.
    Is there any normal config setting to stop it form geting picked during MIRO.
    Thanks

  • Return to vendor from Blocked Project stock - Line rejection

    hi
    I have a problem in doing line rejection for return delivery from a blocked project stock.
    we had modified F5 notification for Project related senario to FQ and using the same for doing line rejection return delivery directly from project stock with the help of action box.
    While the include is accessing MSPR table for picking up the project stock.
    the steps involved are as below.
    1. create FQ notification (Similar to F5) by giving inputs as Material to be rejected,Plant, Defect code from existing code group and assign the purchase order.
    2. Tranfer the project stock to blocked projection stock ie.rejection stores using 344 movement type. while doing this 344 we give input of WBS element, storage location and Batch.Stocks against this WBS are picked from MSPR table and trasnferd to rejection stores.
    3.After this while doing return to vendor we give the reason code and post 122 document.
    the problem is if the material is having two WBS elements it and both have stock in rejection stores this follow up action is unable to pick the Exact stock for which the WBS element is assigned to notification while 344 movement.
    please suggest me as how the WBS element can be retrived from a notification which was used for earlier actions in action BOX.
    regards
    NVB

    Hi
    If u want to return the material to the vendor. In MIGO itself select return delivery against the material document with movement type 122 u can send it.
    This is irrespective of material lying in quality or blocked. From quality or from blocked status u can send the material back to vendor.
    No need for quality to Un restricted or Blocked to Un restricted.
    Regards,
    Raman

  • Error while posting stock from quality to return delivery

    Hi ,
    I am working in decentralized warehouse. I am posting stock from quality to return delivery in t code QA32. The following is the error message i am getting . i have also checked the movement type settings they are fine for 553.
    "Posting only to free or blocked stock due to missing goods receipt".
    Please let me know if i am missing any thing in config......
    Thanks
    Ilyas

    Hi Ilyas,
    Can you check again the movement type? For return delivery movement type 122 is used and 553 is for GI scrapping from QI. You can check it in SPRO>QM>QI>Inspection lot completion> Define inventory postings.
    reg,
    Sudhir

  • After MIGO mvt 101, moving stock to blocked.

    Hi,
    after posting a good receipt with MIGO (mvt type 101) I want to move this stock into blocked stocked
    using the material document of the goods receipt.
    How can I do this?
    I tried with MIGO selecting transfer postings, material document and indicating the material document
    of the goods receipt but system can't allow this:
    Diagnosis                                                                               
    You want to post a goods receipt, goods issue, or transfer posting with
        a material document as a reference. The document entered does not      
        correspond with the prerequisites in order to be used as a reference   
        using this functionality.                                                                               
    System response                                                                               
    The prerequisite of this functionality is that there is a material     
        document without a reference, in other words, the document posted at the
        time must have been an 'Other' goods receipt/goods issue or an 'Other' 
        transfer posting, according to the selection.                                                                               
    If, for example, you want to post a goods receipt, you cannot use a    
        transfer posting document as a reference.                                                                               
    Procedure                                                                               
    Choose a document suitable for the selected activity.

    Hi,
    If you want to post to Blocked stock, do it while you are taking the GR - 101 -blocked stock. When it clears the inspection then you can transfer that to unresricted stock.
    But here remember, you can not transfer with ref. to material document. Input the material and Quantity.......
    You can also explore the functionality of 103 nad 105. Posting to Gr-Blocked Stock and releaseing from GR-Blocked stock. Here you can transfer with ref. to material document. Most of the companies use this functionality, in case material needs intial or visual inspection.
    Hope this resolves your issue.
    Thanks,
    Kris

Maybe you are looking for

  • Link to a file in the jsp page does not open correctly

    Hi all, I have a JSP application which is similar to a discussion forum and the messages usually carry a link to an attachment file which could be of any extension. The client pool I am dealing with are concerned only with MS Word/Excel/PPT files. Wh

  • Left outer join functions like simple join

    I created two views SCO_REQGROSSLINES_V & SCO_REQLINESCOMPLETE on Oracle requisitions base tables. Our business rules enforce the following identity: the number of gross requisition lines will always be greater than or equal to the number of requisit

  • Missing the content when saving HTML from JEditorPane.write(..)

    hi, i m trying to develop html editor using JEditorPane. the document type used is HTMLDocument and HTMLEditorKit. when I try to save using the following function: try{ FileWriter     w = new FileWriter("doc.html"); //HTMLEditorKit edi = (HTMLEditorK

  • Handling multiple submits in single form with JSP

    HI, I need to handle multiple submits in single form in a JSP. <html> <body> <form action="/Compute" method="post"> <input type = "Submit" value="Find"/> <input type = "Submit" value="Add"/> <input type = "Submit" value="Delete"/> </form> <body> <htm

  • BCP Microsoft Platform integration with Solution Manager

    Hi Is it possible to integrate BPC Microsoft platform 7.0 and 7.5 with Solution Manager? If so how?  Is there documentation available explaining the process?