Stock from qua;ity to unrestricted

Hi All,
Is there any transaction code for quantity released from quality to unrestricted use(stock)?
Or is there any report for that?
My client requires a report on this.
Reward points for helpful answer.
Regards
Ashis

hi
Goto MB51
Give the Movement type as 321 Transfer posting stock in quality inspection - unrestricted-use stock
The quantity is transferred from stock in quality inspection into unrestricted-use stock. Here you can post the quantity to another storage location.
You cannot use this movement type for QM-managed materials since transfer posting for these materials takes place via the usage decision.
and also 322 for reversal of 321
If you want to transfer stock from Quality to Unrestricted then go to MB1B and do transfer using movement type 321
Regards

Similar Messages

  • How to transfer stock from sample usage to  unrestricted use

    Dear  sir
    how to transfer stock from sample usage to  unrestricted use

    I suppose user has accidently posted quantity to sample usage?
    Do you see material document with movement type 333 for this material?
    You can search material document list using MB51 transaction
    or If you know the inspection lot, You can list material documents list from inspection lot.
    If you can find the material document number -->Use MBST transaction to reverse the movement
    If you can not find material document --> use Mb1C transaction use movement type 561.
    In either case stock can not be return to same inspection lot. You can activate another inspection lot using inspection type 05 if needed.
    Hope this helps.

  • Transfer of Stock from Quality Insp. to Unrestricted

    Hi SAP-PP/QM Experts,
    I am doing complete inspection with UD for a particular inspection lot but my stock in Quality Inspection is not transfer to Unrestricted Used stock.I also tried Movt.Type 321 thereafter the stock can't moved.Pl.suggest me the usefull solutions.Helpfull solution will be awarded.
    Prashant

    Dear Venkat,
    There is a  tick mark in post to inspection stock indicator thereafter inspection lot tab in qa32 or qa11 is not activated.
    Secondly, this is a stock item.
    Thirdly, No PS module is implemented in my client
    I think the user has posted  the stock through MB1C with Movt.Type 503 into quality stock.At the time of this posting the 05 inspection type is not activated in QM view of Material Master thatswhy system does not created any inspection lot for this.
      After some days,with out stock posting from inspection stock to unrestricted stock,he has activated 05 inspection stock for the first time.
    Pl.suggest any possible solution .
    Prashant

  • Transfer posting stocks from quality inspection to unrestricted, problem

    Hello Guys,
    kindly help me i am having problems doing transfer posting (mb1b) using movement type 321. because in my stock overview (mmbe) thera are stocks in Quality Inspection, i want that to be trasfered in Unrestricted Stock. that's why i execute transfer posting but there is an error occured doing it so. the error is "change the inspection stock of material 1078 in QM only". how could i make this stocks transfer to unrestricted?
    please advise me the correct way to settled this.
    thanks and regards,

    Hello Guys,
    I am very thankful for all of you contributing to this thread of mine hope in some other time you can work it out with me again I already done all this resolutions you have mention and I also know that is all the right wya to solve this issue but i dont see my problem exists on the configuration in material tpye allocation because in our business sample the FERTin standard SAP but with us it is customized name, have different code it was not define in TLtype in material allocation for quality inspection (Q), now i know what to do to call our admin to authorized my config there.
    Thank you so much i will closed this thread now please help me in some of other query next time. hehehehe..
    Regards,

  • MBBE-"Quality. inspection" stock shows Inspection lot as "Unrestricted"

    Dear All,
    In MMBE, a material is available in "Quality Inspection" stock.
    We checked in "QA32". There we can see, it is in "Unrestricted use".
    How to move the stock from "Quality Inspection" to "Unrestricted use".
    Any suggestions.
    Regards,
    Mullairaja

    create a inspection lot manually for the qunatitiy that is still in Q-status and do a usage decision

  • Revaluation in stock transfer to Sales Order stock from unrestricted

    User is trying to do a stock transfer posting from unrestricted to Sales order stock.  Now the system is throwing an error saying that account setting has not been done for UMB (OBYC setting).  I have given the GL for this UMB transaction type in OBYC>  UMB is for posting Gain/Loss from revaluation.
    I dont understand how a revauation happens when we transfer stock from unrestricted to Sales Order Stock ?  What is the purpose of that in our scenario, could you please explain.

    Hi:
            Normally it should not happen in case of stock transfer posting. Please check the movement type settings for valuation class of your material and see if the transaction type UMB has been set against valuation class in OMJJ...Account grouping.
    Hope it will help you.
    Regards

  • Problem in BAPI for stock posting from quality inspection  to unrestricted usage

    Hi all,
    I am using BAPI_GOODSMVT_CREATE for  stock posting from quality inspection  to unrestricted usage Stock against quality inspection lot(not by MB1B) using mvt type 321.The material doc gets created by the BAPI,but actual stock posting is not taking place ie.the stock doesn’t get reflected in QA33/32 and QA11 also .Can any one suggest what must be wrong?The inputs given are as follows:
    GOODSMVT_HEADER:
    PSTNG_DATE =30/07/2014, DOC_DATE = 30/07/2014, REF_DOC_NO = INSP LOT NO.
    GOODSMVT_CODE:
    GM_CODE:  ‘04’ .
    GOODSMVT_ITEM:
    MATERIAL = MATERIAL NO
    PLANT = PLANTCODE
    STGE_LOC = ‘WIP’
    BATCH = BATCHNO
    MOVE_TYPE   = ‘321’
    ENTRY_QNT = 100
    ENTRY_UOM =  ‘EA’
    ORDERID =  Prd ord no.
    After executing this I used BAPI_TRANSACTION_COMMIT also. I am able to see the posted qty in MMBE,but it is not reflecting in QA11/33/32.
    Kindly help me.

    Hi Naveen,
    Thanks for the reply. Even after using FM QAVE_PROCESS_AUTO_UD,when i execute
    BAPI_GOODSMVT_CREATE, the same thing is happening.I am unable to see the stock deducted in QA33.
    Is there any input in the goods mvt bapi where we can provide inspection lot no since i believe that the goods mvt has to get connected with the inspection lot.

  • Transfer of stock from Returns stock type to Unrestricted/Blocked

    Hi,Friends
    How to transfer of stock from Returns stock type to Unrestricted/Blocked
    what movement type will trigger by transfering this stock,
    Thanks & Regards
    Krishna

    Hi,
    use MB1B Mvt Type 453 returns to unrestricted
    Unrestriced to Blocked stock use - 344
    Thanks & Regards,
    kiran

  • Unablt to post stock from QI to Unrestricted (QM enabled)

    Hi All,
    Am facing an issue where a quantity of stock is residing in QI which I am unable to transfer to unrestricted. An Inspection lot (Inspection type 08) had got created for Movement type 309 and due to some reason, the Inspection lot has got cancelled. I tried to transfer post the stock from QI to unresticted but id does not allow me to stating that the Inspection stock should be changed in QM. How do I go about to sort this issue.
    Thanks in advance.
    Regards,
    Imran

    Hi Lokesh,
    Appreciate your time and effort. Please find my response to your queries below:
    1. Check for sufficient stock svailability in both the materials - A stock quantity of 10 was transferred from Material A to Material B with Mvt Type 309. Hence this stock of 10 now resides in Quality Inspection.
    2. Check whether storage location pick points extended for both the material - Both the materials are in the same storage location hence the requirement to extend does not exist.
    3. Check for batch activation, if yes check for batch restriction or check whther u hv specified correct batch pick points - Batch Management is activated, no batch restriction exists.
    4. Check whther material is stock relevant and not activated for special stock indicators. ensure stock not posted to cost center for direct consumption. - Material is stock relevant and is activated for special stock indicator. It is not posted to a Cost center.
    5. Check Inspection lot status for REL CALC SPRQ. - Inspection Lot status is REL CALC SPRQ
    Also note that the Material is an AFS Material.
    Regards,
    Imran

  • Releasing stock from return stock to unrestricted stock

    Hi all
    Can anybody tell me how to move the stock from return order stock to unrestricted stock so that goods which is been returned from customer can be sold to another customer?
    Regards..,
    Karthik

    Hi,
    If u want to post the stock to ur own location for future use u can use
    MB1B transaction and with movement type 453 you can post it
    hope it will help
    regards,
    santosh

  • Returns sale order stock from returns to quality error

    Dear All,
    For FG Material we have activated Inspection Type '06' - Returns from Customer Inspection and Inspection Plan with Usage 'Goods Issue 06' also created.
    We create return sale order material comes in returns and we need Inspection lot with '06'. so in MB1B using mvt type 457 trying to move stocks from returns to quality but system is not allowing to transfer stock it gives error Change Inspection stock in QM only.
    kindly give your suggestion for this error.
    Regards,
    sakthivel

    For FG Material we have activated Inspection Type '06' - Returns from Customer Inspection and Inspection Plan with Usage 'Goods Issue 06' also created.
    SAP has returns set up to create 06 inspection lots. These are not stock relevant. In this case the inventory goes into the return stock category and another move must be done to move the material to unrestricted or blocked as needed it will not allow to move to QI
    If the material should go into QI stock and be under QI control, then config must be changed to use the 05 inspection type instead of 06.
    We create return sale order material comes in returns and we need Inspection lot with '06'. so in MB1B using mvt type 457 trying to move stocks from returns to quality but system is not allowing to transfer stock it gives error Change Inspection stock in QM only.
    In SPRO SD schedule line category for returns(DN) change movement type to 655 and make relevant settings for QM movement types.
    Check below relevant thread for more information
    sales return
    Cheers
    KK

  • Error while Releasing the Stock from Quality-CRTD CHCR SPRQ

    Hai Experts
                          While releasing the stock from Quality i got  error like function cannot be caried out,
    The Material Status CRTD CHCR SPRQ.
    Thanks
    Rajakarthik

    Rajakarthik
    It looks like the status you mentioned are of inspection lot.
    CRTD mean created status of inspection lot.
    CHCR means characterstics required. in your case the the material master inspection view says characterstics required however your inspection plan does not have any cahracterstics.
    assign the characterstics to inspection plan & both the status of inspection lot will change. you will be then able to process the inspection lot to move the stock from quality to unrestricted.
    Regards
    Mahesh

  • Able to post Invoice for Blocked stock from quality

    Hi
    I did GR for material against PO for 50 pcs, During QA32 stock posting i posted 30 pcs to Unres. stock(101) and 20 pieces to blocked stock(350) storage locations.
    Now when I am trying to  create  MIRO invoice verification, I am getting all the 50 pcs and available to post also for the entire quantity. How the system is allowing me to carryout Invoice verification for the blocked stock 20 pcs also ???
    It should allow me to process the 30 pcs only which are in unres. stock .
    How do I block the blocked stock from getting invoiced ?
    Please help
    Thanks
    Samuel

    Dear Jurgen
    Thanks for the reply,  master does contain the control key, I also have the inpsection set_up for the materials. During PO in delivery tab at item level I am getting stock type as Quality Inspection. During GR, lot is getting generated and we are able to Stock post it using QA11. Every thing works fine till the stock is there in Quality till the run of Txn QA11. But once stock is out of quality we are having the issue for the stock posted to blocked, I can understand MIRO picking up Unrestricted Quantity of the Lot but why it is also picking the quantity posted to blocked stock as we do not want to pay the vendor for this stock quanitity till we clear it.
    Is there any normal config setting to stop it form geting picked during MIRO.
    Thanks

  • On order stock to be transferred to Unrestricted stock

    Some material was transferred from Plant X to Plant Y.
    Now this material is lying in On order stock instead of  Unrestricted stock
    Kindly suggest how this On order stock can be transferred to Unrestricted stock
    Thanks

    We tried to post GR against PO (i.e, STO number)
    also tried with outbound delivery document but cant do it.
    Actually there were 3 line items in the STO, delivery and PGI was done for all the 3 line items now GR was also taken for all the three line items.
    However when we checked the material document display, system posted 1st two line items with 101 mov type and the third line item was having mov type 605
    now this item is sitting in on-order stock., I want to bring this to Unrestricted Stock.
    Reversing and re-posting shall not be feasible.
    Kindly revert, its urgent

  • Remove stock from Quality Inspection

    Dear All,
    In material master by mistak quality inspection flag was active in packing material with 01 inspection type.
    When we received material it goes for quality inspection after MIGO. So in MMBE it shows in Quality Inspection.
    Now the Plant in which MIGO was prepared has no quality related data maintained.
    We tried to reverese MIGO document but system not allowing to do as srock is in Quality inspection.
    Is there any way to reverse the MIGO or moving stock from quality to unrestricted?
    Thanks in advance,
    Nirav

    Did you identify the original material document and then try MBST transaction to cancel the document?
    When you use the term "reverse" it sound like you are trying to do a 102 against the 101.  You can't reverse the transaction, you have to use MBST to cancel the transaction.
    Otherwise you have to set up enough QM data to process the lot.
    FF

Maybe you are looking for