Stock in mb52 without batch
There is some stock in one store showing in mb52(without batch), there is no entry in MCHB table while there is entry in MBEW against this stock, we want to remove this stock, Please advice how can we remove this stock.
Thanks
Deven Sharma
only batch stock is stored in MCHB,
if the material is not managed in batches, then the stock is in MARD.
MBEW has only the valuated part of the stock.
you can use a physical inventory ot make stock zero, you can issue it to cost center with 201 or to scrap with 551.
562 should only be used if you want reverse initial stock (which you entered mistakenly with 561, and you are still in go live phase. this movement should nto be used after a go live)
Edited by: Jürgen L. on Aug 12, 2011 9:28 AM
Similar Messages
-
Stock ageing report without Batch Management
Hi Gurus,
My client wants a Stock ageing report. But my concern here is can we achieve this without batch management
According to my client, Inventory ageing report should show stock quantities and stock value as follows,
1. Below one year
2. Between one and two years
3. Above two years
We can accumulate the goods receipt as per Material document date and movement type according to the above age requirement.
But, can we track goods issues from the above age groups without Batch Management.
Experts Pls reply and If possible, pls explain how we can achieve this.
Thanks
NDSAs you already noticed not only the input (GR) but the output (GI) is also important.
The date of the GR is only one thing, but after that you received the goods in your SLoc you cannot make difference between stocks received at different times.
As your stock is not distinguished in the system as per the GR date you cannot say that which sub-stock has been consumed during GI.
So, without batch management you cannot achieve your goal in standard system.
Of course, physically you can realize your idea by putting labels on different batches - this would mean batch management physically and not in SAP.
If you use warehouse management you can use a workaround: the GR date is stored in the quants and this makes possible to track the age of the stock without batch management. Please check:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f83b5e4afa11d182b90000e829fbfe/frameset.htm
Regards,
Csaba -
Inspn For 103 Movnt Type UD Not allowing without Batch
Hi Experts
We have one scenario : For Incoming materials we are doing 103 GR Block stock and system
not asking any batch during MIGO.And after quality inspection (RR) 105 Block stock to unrestricted
(Here we are entering the batch). But before this we need to take UD for the lot
but system is not allowing me to do UD without Batch. For time being we are doing stock posting only.
Kindly advise me how can I take UD without Batch for 103 inspection lots.
Inadvance Thanks
Shiva PatilHi Vishal / Sanil,
The problem is QM don't want create this batch we have suggested this they want system should assign automatically. In 103 there is no such a way that MM can enter this batch. QM is asking we haven't entered the batch in 103 so we want this lot need to be close without Batch.
1) Which sap note is suitable for this kindly suggest me
Thanks
Shiva Patil -
How to upload stocks of Materials having batches (Manu Srl. Nos)
Hi MM Gurus,
Users at our end have a requirement to upload stock balances of
1) Materials without batches
a. Used MI01 and specified plant with storage location
b. Materials were entered without entering batches in MI01
c. Saved MI01
d. Through MI04 ticked zero count and entered quantity, saved
e. Through MI07 posted the document
f. System shows correctly the stocks updated for the materials
g. No problems for this
2) Materials with batches
a. Now the batches above relate to Manufacturing serial number
b. E.g. Laptops for 20 nos have 20 batch numbers which we want to upload
c. Went to MI01 and entered only 1 material viz. Laptop
d. Now in the batches column, entered 20 rows for the 20 batches
e. Against the 20 rows, when I tried to enter same Material 20 times, the system gave an error message
How do I resolve this problem? Have others faced this problem?
How can I upload stock of materials containing batches? Could be 20 or 100.
Please let me know how to resolve the same. Also under which heading would this appear in Help.sap.com?
Thanks in advance
MHello dear ,
use below t codes
CREATE BATCH MSC1N
MATERIAL CODE AND BATCH POST ( PHY INVT DOCU) MI01
INVENTORY COUNT MI04
POST DOCUMENT MI07
vijay -
Hello Gurus
How to implement Shelf life expire data concept with out batch management .
How to identify stocks , only based on Shelf life in Inventory managment ?
Any input will be highly appreciated
Thanks
NickThanks for your input
Hi,Biju
Qn for you : Suppose if i receive 100 today with sled life 60 days , and tomorrow 100 with sled life 60 days, means total stock is 200.
How we came to know which stock contains 60 days and 59 days as on today. MMBE report will show 200 only, what we are going to gain by this ?
How a user knows about the SLED life ,In our case Date of Production and date of receipt will be same
Thank your Jürgen L. , Your point is valid
Without batch management it is unmanageable.
Is it any way to distinguish the stock by SLED life without batch managment ?
Is it possible to pull the delivery BY SLED days using FIFO through Inventory managment ?
Thanks for the valuable discussion -
Stock ageing report with batch Management active
Hi Experts,
My client wants a Stock ageing report and batch management is active
According to my client, Inventory ageing report should show stock quantities and stock value as follows,
1. Below one year
2. Between one and two years
3. Above two years
What are the table and fields to be considered for this report.
Thanks
NDSWhat steps do you mean? taking an ABAP course and doing it yourself, or stepping to an ABAPer and let him know what he shall do?
you asked for a stock report, not for a movement report.
If I go into my warehouse and looking at all the stuff sitting there and want a report that should tell me how old this stuff is, then i am not intrested if there was a goods receipt movement.
However I would like to know the last movement date. In this case you have to look into table S032 or into the movements MSEG (with MKPF as header table) -
Material without batch in subcontracting.
Hi Experts,
In our company we have activated batch management for some materials and some materials like packaging oil etc we have not activated the batch management. Both (with & without batch)the materials going outside to subcontractor and a 57f4 nor is generating for movement type 541. We can track the materials with batch by using their batch number for its purchasing document. Kindly explain me how to track materials without batch for its purchasing document(101). Our technical consultant is writing a program for that we are not getting how to get the goods receipt number of the material without batch which is consumed at subcntractor. Tell us tables also.
Thank you
Sap MMThanks for replying.
Yes our requirement is different. As we know when material coming back from subcontractor with final product, we are doing subcontacting goods receipt. The components suppose x&y is consumed for making material Z. In that for material x batch is active and for material y batch in not active. The material x by its batch number i can track it (101) Goods receipt nor. But for material y how to get it (101) goods receipt nor. Is there any tables are there that from we can get material y goods receipt number. As batch is the common thing from purchasing to comsumption of a material.
Thank you
Sap MM -
Inspection lot without batch no.
Hi
For 03 inspection type, inspection lot is creating without batch number, while doing UD it is asking for batch number.
Client will give the batch number only at GR. Im unable to clear the lot.
Please advise, how to create a inspection lot without batch number or clear the lot without batch number.
Note: I used freely defined inspection points for 03 lot.
Thanks&
Regards
JanardhananHi
You need to apply SAP Note 146945 - Making usage decision for production lots w/o batch.
Also with the above note, you need to mentain the below setting,
In recipe
Recipe header> Quality Management> Partial lot assign: Partial lot not supported
Select Operation with QM active, go to details> Insp. point completion: Valuation
Thanks
Sachin -
BBD / SLED in EWM without Batch Management ?
Hi
Can we have BBD / SLED functionality in EWM without Batch Management ?
The products are not batch managed but Best Before Date Or Shelf Life expiration is required.
Regards / Vinod SedaniHi Vinod.
Yes, it's possible to work with BBD / SLED without Batch Management.
You can find more relevant information in:
Checking the Best-Before Date or Expiration Date - Delivery Processing - SAP Library
Best Regards,
Felipe Tripodi -
Process order confirmation through PI sheet without Batch no.
Hi Experts,
Can any body tell me how can we confirm the process order through PI sheet without batch no.? I know though COEBR we can confirm the order through PI sheet but it requires batch no. & We don't have batch managenent implemented.
Youe suggestions are valuable for me.
Regards,
Shivkumar DachawarTo make GR for the order for materials without PI sheet.
1. Process instruction category PROD_2 - which does not require batch number. Tcode O12C
2. Assign this Process instruction category to your Control recipe destination for your plant - SPRO- > PPPI -> Process management -> Control recipe / PI sheets -> Contrl. rec. destination -> Define and setup
If you need more information let me know. -
Sales of same material with and without batch
Hello Experts,
One of my requirement is
To sell single material from same plant
1)with batches and
2)Without batches
Will this be possible in R/3 and how?
Please suggest.
NVSHi Nikhil
It Depends on where did you activate the Batch management. If its activated at Plant level, then yes, its possible to maintain the batch for a single material in one plant and no batch in another plant.
But if you activated batch management at material level. then its not possible to have batch assignment in one plant and not in another.
If you have batch activated at material level. what you can do is create a dummy batch in the other plant and the actual batch in the original plant.
Hope this helps..
Thanks
Srini -
Link GI document to respective GR without batch mgmt and PS activated
Hi experts,
We run ECC 6 and have split valuation activated without batch management. We want to find out for each goods issue document, (GI to a capital order Acct Assigment) which is the corresponding goods receipt document. Is this possible. We do not have PS implemented and the PO are not account assigned too.
Please help if there's a solution in sight,,
Rgds,
KJU.Hi,
Ans 1.
MB51 Material Doc. List
Ans 2.
KKAX WIP Calculation for Order
KKAY WIP Display for Order
Regards,
Sankaran -
Material with Expiration date without Batch Management
Hi,
Is it possible to give the expiration date for the Material without Batch Management, during GR.
AktarHi
please find below link. It may help you.
http://help.sap.com/saphelp_47x200/helpdata/en/a5/63349443a211d189410000e829fbbd/content.htm
regards
Srinivas -
Change existing stock items from Non-Batch to Batch Management Method
Hi,
Any prerequisites before changing the existing stock items from Non-Batch to Batch Management method which have On hand stock qty? Please advise.
Thanks & Regards,
PriscillaHi
You can change the method only when, available Qty becomes zero.
OR
you can do one workaround :
Make Goods Issue of that Item and take value of stock in any GL,
and then change the method of that item, then make Goods Reciept by using that GL which was used in Goods Issue.
Regards
Manoj S -
Certificates using serial numbers with material without batch assigned
Hi experts...how can i track serial numbers and inspection lots from roh material without batch assign but with serial numbers ? these roh materials were used in PO without batch assign to FERT material yet. Is possible use where-used list only to manage serial number or only using batch administration over the serial numbers ?
i will apreciatte any answer!
Regards
Marco Antonio Trois EndresHi ,
This seems to be a Material Management configuration question, I dont know if this will answer it
You will have to configure the Characteristics of your Material from a task list and transfer/Copy it to your Certificate profile,
there has to be a feature to enter the desired selection Criteria based on your question
Work with the security team if your MM_G and MM_S class objects can help open or close certain authroization objects to achieve your goal.
in one of the google search it states that
"This can be done from Extras Characteristics from your task list.
A dialog box appears for entering the selection criteria for the task list"
Will Need more security related information to help you on this.
Maybe you are looking for
-
Would teaching abroad with only an iPad 2 be an okay idea or do I need a computer?
I am moving to student teach abroad in 2 months. My 15" MacBook Pro recently died and I am debating on whether to take just my 16gb iPad 2 with me. Would the iPad have enough processing power to handle all lesson plans, pictures, ect. or do I need to
-
Random BSOD X58 Pro E new build
Hi everyone, I hope you can help me. I'm new to the custom built PC realm so forgive my ignorance on some of the finer points. I have searched and can't seem to find, or perhaps understand a solution to this problem I'm having. So, with the obliga
-
IPad email question....
Why does my iPad mail go to the oldest email rather than to the top where the new email is?
-
What do I do after installing OCS single-box Windows?
hi. here is my environment Windows2000Server, OCS single-box R1 I will use Oracle Calendar , Oracle Files and Oracle9iAS Portal I'm not going to use Oracle Email. I've installed single-box R1 successfully. but I coudln't start Unified Message Service
-
Can I save the huge backup files of a 64GB ipad in an external drive?
I am running out of space while syncing idevices. I notice that my (XP user) Documents and Settings folder is a whooping 40GB size due to the backups. This is not counting the music and photos. it seems to just handle music and pictures while syncing