Stock in Transfer(sloc)

Hi
I have material stock of which shows in stock in Transfer(sloc) and not in unrestricted stock.
When I see movements against this it has movement 311 against 1 material document.
I want to know why this material is not in unrestricted stock and why it is available in stock in Transfer(sloc).
Movement 311 is for stock transfer between storage locations as it is one step transfer it should have stock in receving location at unrestricted stock and not at stock in Transfer(sloc).

P1062715 wrote:
Hi
>
> I have material stock of which shows in stock in Transfer(sloc) and not in unrestricted stock.
>
> When I see movements against this it has movement 311 against 1 material document.
>
> I want to know why this material is not in unrestricted stock and why it is available in stock in Transfer(sloc).
>
> Movement 311 is for stock transfer between storage locations as it is one step transfer it should have stock in receving location at unrestricted stock and not at stock in Transfer(sloc).
hi,
stock transfer with 311 was one step processes so please check your processes once agian
Now do with 315 movement type and you have to take the sttocks in to s.location
Thanking you.

Similar Messages

Stock type transfer (Sloc)

Dear Expert,
throught MMBE I can see that there is 1 PZ of a certain material with stock type transfer (Sloc) but I can't find related material document. Can you help me in finding it?
Thank you in advance,
Fuffo

do you know if archiving of material documents is done in your system?
Because this could be a reason if you dont find the document in MSEG.
in MB51 set the flag for read archive at the botton of the selection screen.
check in MARD and MARDH table to find the period when the quantity showed up the first time.
if it is long ago, then you may find inventory adjustments, as the GR was never posted (or was actually cancelled) hence you should have a difference in stock during physical counts.
Edited by: Jürgen L. on Mar 30, 2010 4:24 PM

Movement Type 313 Transfer SLOC to SLOC Report

Hi,
Is there are report avaialble in SAP that shows Stock in Transfer. I have tried MB5T and a few others and they don't work. Basically I want to transfer stock from 1 SLOC to anothe SLOC in two steps rather than 1 step hence using 313.
When I transfer the stock in MMBE the material is in stock status Transfer (SLOC) which is fine. What i am looking for is a mass report that shows Stock in Transfer so it can be monitored.
Please note I am not using Stock Transport Orders just the movement types.
Regards
Adeel

Thanks for all your replies. I have already tried/know about the reports you have mentioned in your replies. I was just hoping there was a transaction that shows stock in transfer in slocs but i guess there isn't one.
Regards
Adeel

PL Stock in transfer exceeded by NOS

Dear Expert,
Our one user wrongly done the 305 ( Place in stoage) entry twice. but when i'm trying to rectify (Reverse entry ) it is swoing me following error.
PL Stock in transfer exceeded by 36 NOS ,
Message no. M7022
But when i have checked system message showing "warning" the MM -> Inventory Management and Physical Inventory - >Define Attributes of System Messages.
Is it right path or may different.
Please help me about this problem.
Regards,
PK.

Some system messages are program specific messages which can't be changed in SPRO settings.
Check this SAP help
http://help.sap.com/saphelp_46c/helpdata/fr/e3/6cec6eb435d1118b3f0060b03ca329/content.htm
which says..
Caution
Messages M7 021 and M7 022 can only be used for the following cases:
Goods movement with reference to a reservation:
If more than the reserved quantity is withdrawn, you can have either a warning message or an error message issued.
Negative stock allowed:
If the stock balance becomes negative due to a withdrawal of goods, the system can issue a warning or an error message. If no negative stock is allowed, the system always issues an error message.
Morever you get this message as error when you try to place the stock in sloc for the second time with reference to the material document(remove stock from sloc).. system wont allow to place the stock twice with reference.. please check whether you placed the stock with reference or you transfered the stock through 301.. in any case, if you have more stock in a sloc.. why dont you try 301 to rectify it as a work around.

Transfer (Sloc) in MMBE

I have seen Material stock throug MMBE , I have found some qty in Transfer (Sloc). Now I want to find out which is the doument no. of this qty.
But when I try through Materials Movement all document dispaly instead of this particular one. Kindly guide us if I want to see particula this Transfer (Sloc) qty document no. is there any tcode.

Hi,
there is a draw back also for 313 & 315 mvts,
example
you have two 313 mvt documents with 10qtys and posted on different dates,
if you do the 315 mvt document later on,
there is no rerence for which 313 document , u received the qty through 315 mvt,
so, please check in this also,
regards
chenna
Edited by: lakshmi reddy on Oct 27, 2010 12:44 PM

Capturing Stock in transfer qty and open PR qty

hi
I am developing a report where I want to capture the following data:
1) Stock in transfer CC quantity (Inter company transfer)
2) Open PR quantity
Can you plz suggest from where(Table name) I can capture this data?
Answer will be awared with full points........
Regards
S

Open Qty PR, You can check Comparing Tables EBAN & EKBE through Pur Req Number
Thx
Raju

Cross company stock transfer, in which table "stock in transfer CC"

Dear Gurus,
When I do cross company stock transfer, in which table quantity for "stock in transfer CC" will get updated?
Rgds
Sar

Hi there
Just with th report transaction MB5T
I think your purpose will be solved using that report
just check the flag cross company code in the initial screen
*the qty gets updated in the table MSEG feild MENGE.*
Reward if usefull
Sujoy
Edited by: SUJOY KUMAR PAL on Feb 15, 2008 6:07 AM

Can i transfer stock with transfer order in Inventory management?

Can i transfer stock with transfer order in Inventory management between two storage locations in the same plant?

I hope you are referring a transfer order and the transfer between two storage locations connected to the same warehouse, and just not doing movement at IM level with a transfer order.
But, if you are referring to making a bin-bin transfer within the warehosue and you want to influence the storage location to storage location automatically, yes, you can do this. You should use 'storage location control' configuration under WM-IM interface to drive this. Essentially, you need to maintain the warehouse, destiantion storage type, plant, destination storage location and movement type 311. When you perform the transfer order confirmation to move inventory from a storage type (inventory is under source storage location) to the destination storage type (per the configuration setting) there will be an automatic transfer posting made to move inventory at IM level from source to desintation storage location.

Is Retail: Store to Store transfer: Deficit of PL Stock in transfer

All,
We are trying to transfer inventory from Store A to Store B.
Both stores have -ve inventory turned on at storage location level. We are trying to transfer using 303 movement type.
While executing the transfer we are getting a "Deficit of PL Stock in transfer XX EA" error.
Checked the article master for the article and neg stocks is turned on for that article in store A and store B.
What could be the reason for this error?
Would appreciate any input

Hi,
Can you please provide more details
Store A - Stock Quantity..?
Store B - Stock Quantity..?
Transaction where you are trying this scenario
Regards,
Satish

Deficit of PL Stock in transfer 10 EA : 100100051 IBM2

hi,
Deficit of PL Stock in transfer 10 EA : 100100051 IBM2
Message no. M7021
please tell me about this?
Regards,
Swathi

Hi Swathi,
Please let me know what all the values you are entering in MB1C trxn code.
Generally it wont show the error. Please chek the plant & storage location.
Revert back in case not solved.
Reg,
Ashok
Rewards welcome.

TCODE List document STOCK IN TRANSFER

Hi All,
Somebody kown TCODE like MB5T to see documents related STOCK IN TRANSFER???
We have outbound deliveries (Delivery Type UL - Del.for Stock Trans. u2013 Movement Type 603 - TF rem.fm stor.to pl) waiting for Goods Receipt that we canu2019t determinated.
Please let me know
Regards,
NACU

Thank Shiva, but we don't have purchase order, que have outbound delivery, it's trhe first document.
First, we have a outdelivery with movement type 603 which put material at stock transfer then we use MIGO (A01 / R05) to transfer into unrestricted-use stock the material posted into stock in transfer in the receiving plant using movement type 603.
We need know this outboud delivery number, VL06 didn'y have tihis information.
Regards,

Table for "Stock in transfer CC"

Hi
I am using cross company stock transfer scenarion. We can see the stock in transfer with the transaction MB5T or we can use the transaction MMBE to see the "Stock in transfer CC".
In which database table this value for "Stock in transfer CC" is stored?
Full points will be rewarded.......
Regards
S

EKBE - purchase order history.
You should find there various records e.g. for the delivery, goods issue and goods receipt.
The value is not just stored in one table field, it gets calculated dynamically

MB1B transfer posting error "SL stock in transfer exceeded by 20 PC."

Hi All,
I'm doing a MB1B transfer posting for my materials from 1 storage location to another using movement type 311,
but some of the materials I encountered this error.
"SL stock in transfer exceeded by 20 PC : 'Material name' 'Plant' 'Stor. Loc' "
I went to MB5T to check the materials if it's in the stock in transfer, but they are not in the list.
I've also check in MMBE to check the stock value of these materials, it shows 100 in unrestricted use which is more than what I'm transferring.
May I know what have i missed checking?
Please help and thank you.

Hi There
Seems you are trying to do the One step Transfer between locations (311), So it is not required to look into the 313, 315 steps (Stock in trasfer, Removal and palce in transfer)
From the Suppling location these Material and Batch is reserved for some purpose(261 or 201) and these material may under Dynamic Availability Check, In this case even if you have the stock in Location if it is hard allocated for some other purpose you cant use this qty
Please check the above settings.
Thanks
Senthil P

ATP check for 'stock in transfer'

I have a scenario which I created a Sales Order for 100 EA of product 'X' shipping from DC01 to a customer. DC01 does not currently have inventory for product 'X'. SAP has inventory only available in DC02.
I created a (two step) STO and an outbound delivery shipping inventory from DC02 to DC01. I issued the 100 EA of product 'X' against the outbound delivery. Transaction MB5T shows the 100 EA 'in transit'.
Under my availability check, on my sales order, the checking rule scope displays, a check on 'Include Stock in transfer'.
Why am I unable to view my stock in transit of '100' EA from the STO process when I look at the ATP check ? How can ATP view the 'Stock in transfer' from the two step STO?
Thank you,
Gustavo

Hi,
Check the settings in t.code OVZ9.
Check the box include purchase orders and select A or X in the field Incl. rel. order reqs field.
After making these settings, just test and update the results.
Do you have batches in the STO? If so are they in restricted status during "in-transit"?
Regards

PL Stock in transfer exceeded by 1 EA : 1017 053 0001

Hi experts,
i am getting the following error while posting a goods movement with movement type 305.
PL Stock in transfer exceeded by 1 EA : 1017 053 0001
Please let me know how can i resolved this.
If possible please let me know the table-field which influences this error.
Thanks & Regards,
Amit

Why do use 305 movement?
305 is the second step of of a plant to plant transfer in 2 steps. you never do a second step before the first.
first step is 303. if 303 is not possible in your system (because of the error you have) why do you get the idea that you have to post something with 305?
What business case is the background for your action?

Stock in Transfer(sloc)

Similar Messages

Maybe you are looking for