Stock in transit assignment in obyc

hi gurus,
i am realy confused as to how should i assign a gl account ( stock in transit ) inside obyc. as this account will be generating an accounting while at the time of stock transfer from one plant to another.
please help me out idnetify the transaction type and the modifier
best regards
sayeed

Hi Sayeed,
In case of Stock transfer following will be the A/C Entrys when do a PGI for the delivery in the supplying plant.
Inventory A/C Dr (Receiving Plant)
Inventory A/C Cr (Supplying A/C)
If there is any diff in the Price then it will be posted to the Price difference A/C.
Now the above entries are triggered on the basis of Val.Class & BSX trans Key in OBYC transaction.
In case of Price Differences we assign the G/Ls to the PRD trans Key.
In case of STO we use the mov type 641 (Stock in Transit)
Hope it helps.
Regards,
Edited by: SAP FC on Nov 26, 2008 11:36 PM

Similar Messages

How to make an account assignment for stock in transit inside obyc

hi experts,
i am sure i dont know as to what transaction type shoudl i use to allow postings to stock in transit account. please help me with step by step processes involved in it.
best regards
sayeed

It is not possible to define default Acct Assgmt cat for particular plants in STO. Instead you can make it default at client level (irrespective of doc type) for particular users.
For doing so you need to just maintain user parameter KNT with value equal to your Acct Assigmt cat. You can maintain user parameter in SU01/SU3. This means whenever this particular user run the transaction which includes act. assigmt cat will have default act assigmt cat.
Hope it might help you somewhat.
Cheers,
Parag Mahajan

Inventory posting - stock in transit G/L account

Hello!
We have a unique requirement that we need to post the stock in transit inventory only if the delivery is for one particular customer (sold to party). It is our own company but not on SAP hence, on the books, an inter company transaction. All that is different in this case is the account assignment group of the customer which basically is no help in configuring OMWB (G/L account determination for inventory postings).
The material/plants/movement types are all the same for all transactions, thereby providing us with no 'uniqueness' in this particular transaction to post these stock in transit inventories to a different G/L. I could possibly look at having another movement type if that can help but then again, how will that be valid only for a particular transaction with this customer, I am not sure...
Can anybody provide me with a step by step instructions on how can this be achieved, if it indeed can be? Appreciate any help or posting here if anyone wants any more clarifications on the issue...
Many thanks!

Hi,
As you might already know that the G/L determination happen based on Movt type and the valuation class. in your case as the movt type and the val class are same, you willl not be able to customize to post it to different account
so for this you do 2 ways:
1: you create a new delyvery type and a new movement type so that you can configure the account determination (OMWB).
2. you can influence the account determination by writing a code in the user exit ZXMBCU02 here you can force the system to post it into the different G/L account.
Hope this helps,
Vikrama

Interco- Stock in Transit

Hi Experts
Scenario: Intercompany STO. Shipping plant posted the Goods issue and the material is in Transit.
Now how do i get the stock in Transit Material cost (Std Cost) in Report.
I used the MB5T it shows the Purchase Order Net Value only and not the STD cost of Recieving plant. MB52 not clear as well.
Could any one advise...
regards
RG.

Hi,
Stock in transit keyfigure will display only EI orders (incase of VMI
scenario) and AH orders (if you create inbound delivery).
If you integrate stock,CS orders only will be available in /sapapo/RRP3.
The root of the problem is in the setting from Intransit key figure:
from a planning area management point of view it reflects
the setting used in the standard SNP planning area but the customizing
of the category group used there is different from the one used in
standard systems.
Actually you added category CS there. But category CS has a atp category
type 0, which means stocks actually. In the SNP planning books by design
stocks are read separately from other orders because have to be
considered in the ATD computation.
Therefore if you need to read orders with category CS you should
consider it in the category group assigned to the ATD receipts key
figure and to the stock key figure.
This customizing could be applied at the planning area level, as
described above or at the master location level, SNP tab.
In this case you can specify there the category groups which have to be
used in order to consider stocks, ATD receipts and ATD issues about all
products assigned to the used master location. Please refer to the
related F1 helps in order to get more information about.
You can get more information at note 591310.
Regards,
Sunitha

MB1B, Mvt Type 351 not posting to "stock in transit"

Hello Experts,
I have created the STO. Now I am executing MB1B with mvt type 351. When I open the material document created, I look at the financial documents, the stock value has been relieved from the supplying plant and posted to the receiving plant. I thought using the 351 mvt was to put the stock in a status of "stock in transit". Only when the receiving plant performs the goods receipt should the stock value post in their plant. Am I using the wrong mvt type or is there a setting I must do to be able to post a material to "stock in transit" status?
Thanks in advance for your help!

Hi
check follwoing links
[stock transit 351 movement type;
)Make sto with t code:me21N at receiving plant.
2)go to MIGO make goods issue agaist the above sto from the supplying plant (movement type:351)
3)go to migo and make GR(movement type:101) at receiving plant agaist material issue document no or sto
For this you need to maintain some configuration at
SPRO: MM > Purchasing > purchase order > set up Stock transfer order
check your settings at this node:
"Assign document type . one step procedure, undelivery tolerance" mention supplying plant,
receiving plant, document type and tick required check boxes
Regards
Kailas ugale

STO stock in transit

Hi,
We have a scenario where we have 2 step STO process involving stock in transit. At the time of PGI there should be debit entry in stock in transit which is knocked off at the time of GR at receiving plant. Please suggest the OBYC configuration.

MM records the stock as in-transit, but from the FI perspective:
Dr. Inventory, receiving plant
Cr. Inventory, shipping plant
In PCA:
Dr Invenotry, receiving profit center
Cr Inventory, shipping profit center
Dr Deliveries from other profit centers, receiving prctr (i.e., purchases)
Cr Internal business, shipping prctr (i.e., sales)
Dr change in stock, shipping profit center
Cr change in stock, receiving profit center
FI doesn't care about in-transit. MM does, so you can see it in the various stock overview transactions.

Stock transport order /stock in transit

Hello
For a stock Transport order scenario { Recieving Plant , Delivering plant } , the documented procedure is:-
1) stock transport order>Goods issue by delivering plant--
>stock in transit(valuated) -- >Unrestricted/inquality/blocked/consumption
just sticking to the above method, how many Material documents & accounting documents would be generated ?
Thanks

Hi,
It depends on your setting, whether you go for 2-step Stock Transport or 1-step.
If It is 1-step then 1 material document and 1 accounting document.
This material document will be of movement type 647 and stock will not come in transit, stock will directly get moved from Supplying Plant to Receiving Plant.
And if it is 2-step then 2 material documents and 1 accounting document.
1 material document for GI from Supplying Plant to Stock in Transit (Movement Type - 641), and another from stock in transit to receiving plant (Movement Type - 101).
And it will update PO History in both the cases.
You can config. this in SPRO > MM > Purchasing > Purchase Order > Setup Stock Transport order > Assign Document Type, One-Step Procedure, Underdelivery Tolerance > here activate "One-step" indicator if you want 1-step otherwise keep blank for 2-step.

Stock Transfer Order (Stock in Transit)

Dear Friends, Need your opinion on following issue:-
Currently, Stock Transport Order with DelOrdTyp: UB with ItCtg: U and      Delivery type in SD: NL is in place.
Plant P orders there material A which is assigned to plant G --> sales order creates stock transfer requisition --> this is converted into stock transfer PO --> movement 641 for GI from plant G with reference to STO --> GR using movement 101 in plant P
The problem is that when making GI with mvt. 641 the postings are directly from stock account P Dr to stock account G Cr and there are no postings at all when GR with mvt. 101.
I know it is how it works but this is not what we require. Reason:
u2022     Long time span (5-7 Days) between leaving Plant G and arriving at Plant P.
u2022     Need to control when goods leave plant G but not received at plant P.
How to do customization of G/L: Stock in transit..?
Many thanks in advance...!!

Closed

Report for stock in transit datewise

I need stock in transit datewise. Is there any report possible for that ? Which table and fields should I refer. please revert.
Regs,
Appie

Hi,
T.Code: MB5T can be used for Report for stock in transit, but date wise u can't get here. U have to develop areport or by querry u can develop a report.
U can get date (MKPF-BUDAT) wise details by giving movement type in MSEG table u get all the details in the tables.
Regards,
Chinna

Stock in transit using purchasing cube

Dear Friends ,
I would like to create a key figure Stock in transit based on My purchasing cube.
DSO 0PUR_O02
Cube 0PUR_C02
Not dilivered qty. of open Purchase order is considered as stock in transit in our
scenario.
1) I would like to know how can we determine the open PO. According to me its simple
open qty = PO qty - GR qty and if open qty is more then 0 then its should be considered
open po. But in our case some time supplier give us some less qty and even we said po is
closed. and somtime supplier give us more qty and we said po is closed.
now please advice me how can we determine that PO is closed or not.
regards,
Malik

Hi,
You can do it, but you need to create the keyfigure, which will inclued Movement types or Process keys,
You just see the 0TRANSSTOCK key figure in 0IC_C03 cube, which is non-cumulative keyfigure and internally having two keyfigures, so in that way first you analyze the concept behind that and do.
Thanks
Reddy

Opening Closing Stock in transit Report

Hi,
I have to get the ABAP development of Stock Report. Report would have following fields
Opening Stock
Opening Stock in Transit Quantity
GR Quantity
Purchase Value
Sold Quantity
Rejection Quantity
Closing Quantity
Closing Stock in Transit Quantity
Consumption Quantity
In Closing quantity , It should be without stock in transit quantity.
Could you please help me to understand ,Exact Opening Stock ,Closing sock, In Transit Stock etc? How would these be calculated? from which tables all these data would come from. Thanks in advance.
Regarda,
Santosh

SantoshArya wrote:
Hi,
>
> I have to get the ABAP development of Stock Report. Report would have following fields
>
> Opening Stock
> Opening Stock in Transit Quantity
> GR Quantity
> Purchase Value
> Sold Quantity
> Rejection Quantity
> Closing Quantity
> Closing Stock in Transit Quantity
> Consumption Quantity
>
> In Closing quantity , It should be without stock in transit quantity.
>
> Could you please help me to understand ,Exact Opening Stock ,Closing sock, In Transit Stock etc? How would these be calculated? from which tables all these data would come from. Thanks in advance.
> Regarda,
> Santosh
Hi,
You can also check these standard reports before you proceed to develop a report..
MB52 - List of Warehouse Stocks on Hand
MB53 - Display Plant Stock Availability
MB5B - Stocks for Posting Date
MB5C - Pick-Up List
MB5L - List of Stock Values: Balances
MB5W - List of Stock Values
MB5T - Stock in transit CC
MC.9 - INVCO: Material Analysis Selection, Stock
MC.A - INVCO: Material Analysis Selection, Rec/Iss
MC.B - INVCO: Material Analysis Selection, Turnover
You can also consider building a query report which wil also serve your purpose quickly...
Regards
Shiva

Stock in Transit

Hi All
Scenario
1. Purchase order quantity 9 units
2. GR done for 8.999 Units
3. Stock in transit showing 0.001 units.
4. Purchase order is still open and cannot do DC as it throws an error that quantity does not match
5. Purchase order is still open is reports and needs to be closed.
Please guide me on the same as to whcih Tcode and movement type can be used to settle/adjust the quantity of 0.001 units and what would be its constraints or restrictions.
Regards,

Hi,
As per note no 392205 : Note 389484 makes movement types 557 and 558 available.By 557 mvt type
excess stock in transit can be removed or and by 558 missing stock in transit can be created.
Now as per standard SAP The R/3 system is designed so that the stock in transit can only be posted through stock transport orders (creation during goods issue, reduction during goods receipt).
Purchase order and material master record can have different units of measure. The purchase order is then closed when the goods issue quantity and quantity of goods received are the same in order unit. However, in the material master record, the stock in transit is managed in the base unit of measure.
On account of system-dependent and program-internal rounding effects which cannot be avoided, the open stock in transit quantities in order unit and in base unit of measure might not balance to zero at the same time.
I think probably this will help you in devleoping better understanding as everything is self explanatory now as per note suggested by you.
Regards
Ankur

Stock in transit report with delivery # and date included

I need a report similar to MB5T that will also show the delivery number and goods issue date. I couldn't find anything standard and was going to ask an ABAPer to create something. When researching where stock in transit is stored, I keep finding that the value should be in MARC-TRAME; however, in our system that value is blank (even for a material that shows stock in transit in MB5T.) Is this value stored in another location as well?
Thanks in advance for your help.

Thanks for the response. I know that I can view the PO history by going into the individual POs, but we want something that will show all of the POs at once without having to click in each individual one.
Thanks!

Seeing Stock in transit details by using MB5T by date wise

Hi all
Are we able to see stock in transit (T.Code: MB5T) report by date wise.
Reagards
Srini

Hi,
You will not get stock in transit details as per date in MB5T.
Use Report MB5B and here in selection screen, input the "Selection Date" and "Non-Hierarchical Display" option and execute the report.
And in output, view the column of "Stock in Transit"

Stock in transit as on date

Dear Freinds,
I am trying to develop a report which gives me the stock in transit as on a particular date.
Can anybody please suggest me the appropriate table/infostructure to find this information.
Helpful answers will be rewarded!!!
Best Regards,
Arahanth

I am trying to find out the stk in tras as on a particular date say..04.05.2006 for which the material is already delivered
The manangement wants to know the stock in transit for a particular date.....

Stock in transit assignment in obyc

Similar Messages

Maybe you are looking for