Stock In Transit In IM (MMBE) Not Showing in WM
Hi SAP Experts,
The user used VLMOVE in moving the material from storage location to storage location using movement type 313. The destination storage location is in a different warehouse. In IM, it posted in the transfer storage location or stock in transit although upon checking WM it does not reflect since a Goods Issue has been posted. The application is an after sales service wherein upon creating a sales order, the material will be scanned and a returns delivery and goods receipt will be created. The posting change using VLMOVE occured during the goods receipt. After checking OMKX, the movement type 313 is not maintained and I'm unsure on how to proceed with this. I was thinking that maybe the only the IM movement was posted since in MIGO it's still reflecting the previous storage location in the WM tab. Please help me on how to proceed on this, it's currently not allowing me to reverse the material document or do the 2nd step putaway (movement type 315 in vlmove).
Thanks,
Vito
Just to add, the material is not reflecting in LS24 & LS26 since it has not storage unit because of the goods issue that posted. I can only see it in MMBE.
Similar Messages
-
Hi,
I made a UD of an Insp Lot to 'Scrap' in the Inspection lot stock tab.
The system automatically created a material document with movement type 553 (Direction -) and 551 (Direction +)
However the stock Category in the material document is "Q". IS THIS CORRECT? SHOULD THIS BE "S" (This is in the WM tab of the material document).
Also when I query MMBE after the above UD to Scrap, the batch quantity is not shown either in Quality or Blocked stock. IS THIS CORRECT?
Please advise.
Regards
PriyankaMy understanding was when I input a quantity in 'Scrap' field during UD
1) The stock should be blocked (hence it will show under blocked stock column in MMBE)
2) The stock category should be "S" and not "Q"
I agree that in MMBE based on your explanation the stock should not be shown in blocked.
But can you explain why the stock category is "Q" instead of "S"
Regards
Priyanka -
hi MM guru....
when we initially up load material through MB1C movement type 561...show the massage document no xxxxxxx posted..but in MMBE not showing..even in MB51 not showing that document no...
kindly suggest me
regards
aqueelthen use this info, enter it in the selection screen and try to find the document again.
if you still do not find the document, then you might have entries in the selection screen that restrict your selection.
Further if you have a document, then you should as well have stock, exept you have some more documents that document goods issues.
Further, if you have a document, then the item shown in SM13 cannot belong to this document in MB51, as SM13 only lists posting that have failed. -
Hello all,
Case is
In PO qty = 5.008 KG
Delivery = 5.00 KG
PGI = 5.00 KG
When doing GR in receiving plant: Error for Qty Exceeded by xxx KG
In MB5T qty = 5.008 KG
Now i want to reverse the PGI
When I reverse the PGI [641 Mvt] thru VL09, i get error message
Deificit of PL Stock in Transit 0.013 KG ....
How I can transfer deficit qty 0.013 in Stock in transit so that i can reverse the PGI?
ThanksHello ,
Jurgen explained is correct, But if want to reverse the stock in Transit material
Case is
In PO qty = 5.008 KG
Delivery = 5.00 KG
PGI = 5.00 KG
When doing GR in receiving plant: Error for Qty Exceeded by xxx KG
In MB5T qty = 5.008 KG
Now i want to reverse the PGI.
If you have issue the material from supplying plant means then stock is showing in stock in transit. System will not allow you reverse the stock in transite by normal movment type.
Std SAP has given reverse the "stock in transite" material from Stock in transite position through movement type 557.
Using movement type 557, you can correct purchase-order-independent stock in transit if
- a good receipt cannot be posted to a purchase order without stock in transit, even though there is still stock in transit
according to the purchase order history
- stock in transit still exists, even though there are no open stock transfer orders for the particular material.
Regards
Mahesh Naik. -
Clearing stock in transit (MB5T)
I am unable to clear the stock in transit. We do not necessarily need to receive these small quantities, it would be acceptable to write the stock off to clear this report and remove this stock that does not really exist.
I have tried using the Transaction code MB11 and movement type 305 but the following error message appear:
"PL Stock in transfer exceeded by 168,210 AT : 62002571 3203 1000 NT08022A"
How can I clear the stock in transit?Two way you can clear this
1) do the GR using MIRO with 101 movement and than if you don;t need this stock then scrap it
or
2) use VL09 and enter your shipping plant and delivery number and bring the issue document and cancel this than only you will clear the MB5T report -
Batch is not showing in transit stock
when i make transfer posting against STO then i maintain receiving batch and isssuing batch.
but when i run t-code mb52, then i found qty and value is showing in stock in transit column but batch is not showing.
why it is so?Hi
i forgot to mention that the stock-in-transit is available in MARC table in TRAME field.
Stock in transit dont even have storage location forget about batch
Reward if useful
Regards
SE -
Stock not showing properly in for Batch determination
Dear Gurus,
While doing the following msg appearing since JAN 01, 2008, IN BATCH DETERMINATION THE SYSTEM NOT SHOWING EXACT QUANTITY AS IN ACTUAL STOCK
Pls help for this issue,
Regards,
AtulDear Jagdish,
In MMBE in unrestricted use column there is total 16.979 stock position is there and again for posting ( PGI ) after delivery for selecting batch determination Available Qty is showing 9,999,999,999.000
How I will correct it could not understand.
Regards,
Atul -
Manual Reorder point planning stock is not showing in MD04
HI,
Would any one help me when i plan for reorder point planing the details furnished below.
Mrp type: V1
Lot size :HB
ROP : 30
Max stock level :1000
in Material master settings.But when i run the MRP using MD03 system is not showing available stock in MD04.It is showing 0 stock rather it would show 4 (MMBE un restricted stock..)
What are thesettings required or any thing missing in IMG. Please help me in this.
Regards,
SriniSrini,
You may also want to check if the Unrestricted stock is in a storage location that is excluded from MRP.
On MD04 you will then see a separate line item at storage location & the Qty =4 should appear as shown below.
12/02/2009 Unrest Stock 12 12
12/02/2009 SLocSt QANN StLoc: not plnd 0 8 QANN
12/02/2009 SLocSt VEND StLoc: not plnd 0 0 VEND
Hope this helps. Good lcuk.
thanks,
Ramm -
The stock in transit field is not visible in MD04
Hi Team
Stock in transit visible on MD04
STPO 28801084 is internal stock transfer from FI25 to FI28.
Qty of PO is visible in the ´stock in transit´ field on SAO transaction MD04 under plant FI28
when corresponding delivery 1202400481 have been PGId at FI25 (2014/07/07)
Stock in transit NOT visible on MD04
STPO 28502250 is internal stock transfer from FI31 to FI28.
The ´stock in transit´ Qty of PO is not visible on MD04 under plant FI28.
even if the corresponding delivery 1202323564 have been PGId at FI31 (2014/06/23)
Br, Kiran UndeHello
Please take a look on question 9 of the following FAQ note, which explains the standard system behavior:
549752 - FAQ: MRP elements in transaction MD04/MD05
9. Question: Why does the system not display stock in transit for stock
transport orders with order confirmation (notified orders)?
Answer:
Purchase order confirmations do not have to match the original
purchase order delivery schedule lines. Moreover, the purchase order
confirmation (view MDLA in materials planning) does not contain the
same information as the purchase order to determine the stock in
transit. The display of the stock in transit is therefore not
implemented for the purchase order confirmation in the materials
planning evaluation transactions.
BR
Caetano -
UD Insp. Lot stock tab is not showing
Dear Friends,
At the time of UD Insp. Lot stock tab is not showing due to which I am not able to withdraw sample qty ,
can anyone explain how to add this tab.
Reg: T.code - QA11hi sandip
UD inspection lot tab page will not appear if you have created the inspection lot manually and the lot is <b>not</b> stock relevant
regards
thyagarajan -
Not showing any results V_V2 resheduling sales and stock transfer documents
My client using IS Retail . First i create sales order i want resheduling perticular order through V_V2 i enter article and site ,process sales documents,process stock transfer order,unconfirm quantity and leave simulation but it does not showing any results...previous showing from 2008 to 2010 sales orders only....
Please give answer i am waiting your reply...
Edited by: amitp2121 on Mar 3, 2011 11:57 AMHi Hweiling,
In my opinion V_V1 used to create confirmed backorder (line item where confirm quantity in first schedule line is 0 and there is no second schedule line) .
V_V2 is used when you want to alocate your stock based of priority or some criteria.
For example you have order 1 that created on 07.2007 confirmed but you hasn't delivered yet, then you have order 2 that created on 08.2007 it's not confirmed, and you have the other order 3 that create on 01.2008 and it's confirmed ready to deliver 03.01.2008. You can use V_V2 to alocate the stock to first order, 2nd order and third order. So you can deliver the first order first, 2nd order and then the 3rd order will be in backorder.
If you run V_V1, it's only update the stock for second item (if stock is enough).
If you think why it's not update the order that you want when you run V_V2, please check the criteria and the stock.
Guys please correct me if I am wrong.
tsalasi -
Stock widget does not show any numbers
The stock widget does not show any numbers. I tried relacing the widget, just the same, no numbers
Try restarting your Mac.
-
Hello!
I have created a UB PO, and now when I post the GI with movement type 351, the stock in the delivering is diminished, but the stock in transit is not increased. Any idea why?
Regards,
Ileanahi!
the stock is there, although no 351 + line was created, but I can't do goods receipt for that quantity. I get an error message in MIGO that the quntity is not available......
ileana -
Safari in Ipad is not showing live stock market
anyone knows why the trading-online is not showing live update from ipad safari?
Here's Apple's assistant for this problem:
iPad syncing with iTunes
Hope it helps! -
MB1B, Mvt Type 351 not posting to "stock in transit"
Hello Experts,
I have created the STO. Now I am executing MB1B with mvt type 351. When I open the material document created, I look at the financial documents, the stock value has been relieved from the supplying plant and posted to the receiving plant. I thought using the 351 mvt was to put the stock in a status of "stock in transit". Only when the receiving plant performs the goods receipt should the stock value post in their plant. Am I using the wrong mvt type or is there a setting I must do to be able to post a material to "stock in transit" status?
Thanks in advance for your help!Hi
check follwoing links
[stock transit 351 movement type;
)Make sto with t code:me21N at receiving plant.
2)go to MIGO make goods issue agaist the above sto from the supplying plant (movement type:351)
3)go to migo and make GR(movement type:101) at receiving plant agaist material issue document no or sto
For this you need to maintain some configuration at
SPRO: MM > Purchasing > purchase order > set up Stock transfer order
check your settings at this node:
"Assign document type . one step procedure, undelivery tolerance" mention supplying plant,
receiving plant, document type and tick required check boxes
Regards
Kailas ugale
Maybe you are looking for
-
Urgent help: why smtp authenticator doesn't work ?
Please help me : My smtp server authenticates me whether a valid user when I send email. I have had setup an authenticator as following : //Setup authenticator Authenticator auth = new SMTPAuthenticator(); // Get session Session session = Session.get
-
Connecting my iPod to a Honda... quick ?
I am getting a 2006 Civic and it has an MP3 aux jack in the dash board (not the Honda link in the glove box). What do I need to connect my iPod to the aux jack? Thanks iPod mini
-
How do I remove what appears to be a magnification window?
I some how activated what appears as a rectangular magnification box on my screen that moves with the cursor... Does anyone have and idea of how I might have turned it on and how do I get rid of this irritating feature?
-
Buttons change texture on object - got a script now what ?
I'm newbie on Javascript and I'm trying to figure out this script that was posted by Michael Kreutz on this forum ; ---- This is the script that is used on the 3D object ----- //##### changeDiffuseTexture ##### function changeDiffuseTexture() { textu
-
Mac book pro as an av in for xbox or other av equipment
Is it possible to use an interface somehow to wire up an xbox or freeview box or other av equpment, so basically using the laptop as a portable tv/ screen? regards, leigh