Stock is available in MMBE but delivery isnt created

Dear friends,
Stock for a material is available under unrestricted stock in a plant, as can be seen in MMBE. But at the time of creating a delivery, system throws up an error saying " Required quantity exceeds available stock"
I feel that some stock might be blocked against some open sale orders. Could this be the reason?
I also deleted one open sale order, still delivery couldnt be created.
Kindly advice.
Regards,
Ronald

Dear Ronald
Please check in VL21 whether any delivery is created without doing PGI for the same material.  In this case also, you wont be able to post the goods issue for another delivery.
Also go to VA02, input the sale order and ensure that the quantity what you are to do delivery is flowing in confirmed quantity.  If not, do availabillity check and then retry.
thanks
G. Lakshmipathi

Similar Messages

  • Unable to create delivery even though stock is available in MMBE

    Hi,
    It is giving the following error while doing delivery.
    Item 900001:only            0 each from material XXXXXX are available.
    Thanks & regards,

    Hi
    kindly check out..
    Co09...
    besides, in MMBE check out in which st location as well as Batch stock is maintained..
    apart from that also check out batch status in MSc2N..
    hopw u will get any clue from there..
    thanks
    mahesh

  • How to release process order even if stock not available...????

    Hi All,
    Kindly tell me how to release process order even if stock not available...????
    Its urgent.
    Thanks in advance,
    Regards
    Anish Verma

    Hi Daniele,
    Need your help to clear COGI Error.
    Actually some how for one process order, two confirmation happened.
    Scene 1 : When first time did confirmation then automatically without any error display came process order saved but all goods movement failed.
    Scene 2 : Then for the same without checking COGI error, did second confirmation and then it worked perfectly. Process order got saved without any fail.
    Scene 3: When doing TECO its showing Post processing Error.
    So checked by COOISPI and found two confiramtion done for one process order.
    Now when doing COGI the FERT movement is not happening. Its showing deficit of stock. But smae stock is available in MMBE.
    Pls help me in resolving the same.
    If any query pls contact me. Its urgent
    Regards
    Anish Vema
    07773009107
    [email protected]

  • Display Totol Stock & Open Order Quantity for line item while creating SO

    Dear Experts,
    We have requiremet that while creating SO (VA01) for each item it sould show the message (Popup Screen) about Total Stock & Total Open Oder quantity for that material when user enters the material, plant & storage location in line item.
    Please let me know your ideas in detail if anyone knows about this....
    Thanks in Advance
    Best Regards
    Venkatesh

    Dear Venkatesh
    It is a standard if you create sale order, whatever stock is available in MMBE, it will show during availability check but additionally if you want to see open orders, then you have to go for additional enhancement.
    thanks
    G. Lakshmipathi

  • Why some times delivery  will created through vl10c even sale order stock is not available?

    Hi,
    why some times delivery  will created through vl10c in batchmode even sale order stock is not available?
    Thanks,
    Kalyan.

    the correct english name is : Replenishment leadtime
    Check with Replenishment lead time - Supply Chain Management (SCM) - SCN Wiki

  • Schedule line confirmed but unable to create delivery

    hi,
    schedule lines are confirmed but still not able to create delivery, stock is available in the storage location, no reservations are against the storage location, when i try to create a delivery, delivery quantity field is empty then when i try to enter deliver quantity and picked quantity system give error message ; only 0 ea of material XXXXX available.
    issue has high priority kindly assist me with this

    hi,
    There are so many reasons for not able to create a delivery.
    1) Check the stock in storage location In MMBE
    2) In MD04 check the requirement whether the stock is reserved for any other order
    3) In MD04 or in material master check if any safety stock is maintained.
    regards,
    balajia

  • Mat.is in unrestrictd status in MMBE but its not showin in vl10i unrestrctd

    Hello Experts,
    we are facing a very strange issue.
    we have material in an unrestricted status in MMBE - but it is not showing in unrestricted in VL10I . 
    This was not picked and shipped due to this issue.
    Suppose i am making Sales order for make to order scenario for eg. SO# 201,
    i have SO# 201  specific stock as 1000FT  showing in MMBE in Unrestricted stock.
    For SO# 201 , i have already done ATP check and schedule lines are also confirmed.
    after this i run transaction VL10I, where i can see all confirmed schedule line due for shipping.
    pls refer below data from VL10I , this shows all confirmed schedule lines due for delivery.
    OriginDoc. Item Ship-to  Material     Route   Unrestr
          GI Date    Open qty BUn  ***.qty SU
          201          10 P1300    200000000070 US0001                1000
          08/21/2009   1,000  M2    1,000  FT
    this is Normal process that should happen in system. & is already working fine in system.
    but since last month we are facing issuein production system like ,
    In VL10I, we are getting Unrestricted qty as 0 , even though it is showing in MMBE unrestricted stock.& all conditions are fullfilled
    like confirmed schedule lines, stock availability.
    we tried replicating same in development , Quality and sanbox systems which are having similar environment like production
    systems,but we didn't faced same problem yet.
    Kindly revert on this if you had faced similar issue in past or you have any suggestions or solutions on this.
    Regards,
    Sujit
    Edited by: Sujit S on Aug 20, 2009 5:00 PM

    Hi Guys,
    Thanks for your reply.
    Continuation to your reply.
    what you have conveyed is perfectly ok to me, however the problem is with transaction. VL10I
    when we run VL10I , we get list of all POs and SOs whose schedule lines are confirmed with all details like
    OriginDoc. Item Ship-to  Material     Route  FwdAgent   Unrestr
    GI Date    Open qty BUn  ***.qty SU
    here one of our user gets the issue like  Unrestricted qty is 0. even though it can be seen available in MMBE  for sales order specific stock. or in any other transaction it can be seen avaiable.
    so its problem with T.code VL10I ( Unrestricted qty )
    Rgds,
    Sujit

  • How to handle stock already physical issued out but not yet PGI from system

    Hello
    I have a scenario which I have a question whether reservation is a solution for my problem below:
    The following is our current process:
    1.   
    First, create a sales order,
    Second, create delivery order, assuming system propose storage location A in the Delivery Order.
    Third, the goods are physical issue out to the customer; HOWEVER, it is not PGI out from the sap system. That means goods are physical not in the warehouse but number still show in MMBE.
    Forth, we create a reservation MB21 for this physical issued quantity just so it becomes visible in MRP (i.e. available stock reduced).
    Fifth, in order to ensure that user is able to distinguish such kind of stock quantity which have been physically sent to customer but still remain in system, we move the stock quantity to another storage location (B).
    Sixth, we change the storage location in the delivery order to the “moved-to” storage location (i.e. B).
    Finally, when come to the correct time to perform PGI, user will perform PGI in the SAP system.
    Questions:
    For the step 7, when I perform PGI, how is the reservation document linked to the Delivery Order?
    For the step 4, what is the movement type to use in MB21 for this kind of sales order process?
    For the step 6, I do not think the storage location is changeable at this stage. If not changeable, it will  become an issue as during PGI, system cannot find the stock quantity?
    Is reservation a good solution for step 7?
    Thanks
    Daniel.

    if you physically goods issue the stock, then you should do it in your system too.
    If the stocks are still owned by you while they are at the customer location, then you are just using the wrong process.
    you should go for customer consignment, create a consignment fill-up order in VA01, then a delivery, then goods issue the delivery, this will remove the quantity from your storage location and put it into customer consignment stock  directly below plant level in your MMBE.
    When the customer consumes the material you create another sales order for consignment withdrawal

  • GR blocked stock report(other than MMBE)

    Hi friends,
    do we have any transaction code to check the stock of GR blocked stock?
    i need other than MMBE -this can be used for sinlge material.. i need Gr blocked stock list of all the material of perticular plant.
    in MB52, it is giving blocked stock qty but i need GR blocked stock
    Edited by: Suresh Shenoy on Jun 10, 2008 11:23 AM
    Edited by: Suresh Shenoy on Jun 10, 2008 11:23 AM

    There is no table that hold the GR blocked stock. This blocked stock in MMBE is dynamically calculated.
    from OSS note: 23687;
    The stock overview (transaction MMBE) displays the GR blocked stock. This stock is calculated from the total of all goods receipts for purchase orders into GR blocked stock of this material (movement types 103 and 106) for which the transfer into the own stock or the return delivery to the vendor (movement types 105 and 104) was not yet entered. In this case, only those order items are considered whose goods receipt to the stock is to be posted to the material master.
    Because of this design, reading POs and PO history, it is not available in MB52 as it would create real performance issues.
    Thats why I pointed you directly to the purchasing reports.
    The stock would not be differ from what you get with the WE104 selection.
    An ABAPer can certainly copy the MB52 program and include the calculation logic that is used in MMBE.

  • Schedule Line Date Showing in future in Sales Order though the Stock is available in system on same date

    Hello All,
    Good Morning,
    We have received an Incident where in the Sales Order during the ATP Check we do user is getting the future schedule line date in future as enclosed in the screen shot below. User has created the Sales Order on 12052014 for 7 line items. For the Line Item 7 the Stock is available in the system on same day but still after ATP Check the date is shown in future.
    I wan to replicate the scenario in Quality to find the exact bug to fix the Issue but not able to replicate for same customer and material i am getting the current date as confirmed delivery date. please guide me if you can share some inputs so that i can go in right direct and fix the issue.
    Please respond it is critical Issue.
    Thanks,
    Farhan.

    Hello All Experts,
    Many Thanks for all the Inputs you have given.
    Finally we have replicated the Issue in Quality 2 Days Back and Indeed it was great Achievement.
    Finally We have given to Abaper to debug it find the root cause.
    Let me summarise the actual Issue.
    Issue : Sales Order Schedule Line showing future date for the Materials which are having Product Allocation even though the Stock is available and Allocation Qty also available in the PA Master Data we maintained..
    We created one Sales Order for Line Item A and B. Line Item A is having Product Allocation. When we created Sales Order for both Line Item A and B we got Schedule Line Date as 13.06.2014. Then we Schedule the Re-Scheduling Job in V_V2 and check the effect. For Line Item A the Schedule Line Date got changed to 01.07.2014 and Line Item B it was same as before.
    Would like to know is there any config setting at Schedule Line Level we have missed just want to cross check if there is any or something in Product Allocation Configuration.
    Please refer screen shots below for more details of Sales Order before and after effect in Re-Scheduling.
    Please provide your inputs on this.
    Thanks,
    Farhan.

  • Check stock quantity available during Hu packing

    Hi guys,
    When I Pack HU on HU02 transaction, system don't check available stock for material packed.
    So I can pack 1000 kg of material A, and for this material the available stock only has 700kg.
    When I transfer HU, I have inconsistent information, on MMBE 'Stock overview' I have 700kg but when I display HU, the packed quantity are 1000kg.
    Any ideia how I can solve this problem.
    Helena

    Dear,
    Go to T.code OPJJ.Select your Checking rule (which you have assign in your Checking Control for your Order Type in T.code OPJK) and activate Check for Include Reservation and dependent reservation as X.
    [Thread|in opjj ( Availability check) - diference b/n  X and A in inclued dependent]
    Regards,
    R.Brahmankar

  • Reserve stock once delivery is created

    Hi All,
    I want to reserve the stock once delivery is created. In short when delivery is created in MMBE we see that qty in "Schedule for delivery", but i want to see that in "Reserved" column.
    Kindly let me know what settings needs to be done.
    Thanks in advance....

    Hi,
    There is no standard SAP configuration to automatically post the stock to sales order stock
    You have to either manually do 412 E or programatically post the stock to sales order using 412 E
    for Automatically controlling use MB_CREATE_GOODS_MOVEMENT Function module in the Sales order Exists
    Code the program in such a way it will post the stock for that sales order and saves
    So no manual intervention is required here
    regards,
    santosh

  • Delivery is created even if there is no stocks

    Hello All,
    Pl find the issue as follows.
    In our tranship process, a sales order for a variant config material is placed on a distribution warehouse.  This creates a stock transport order to be placed on the production plant to produce and send the product to the warehouse.  On the delivery creation date for the STO, a delivery will get created even if no stock is available at the supplying plant.  It should only be created if the material has been produced.  Also, once the delivery is created, neither the STO or the delivery shows on the stock/requirements list at the producing plant, and the demand is no longer relevant for MRP.
    We checked for the Checking group,Checking rule and scope of check.
    Thanks in advance.
    Ulhas

    Thanks a lot for the answer.
    Pl guide me for the check you mention @ "RLT indicator set in the requirement type".
    Actually what we though was that system could not found the transfer of the requirements
    Pl correct me for the following.
    In order to carry put an availability check in the delivery, the delivery needs to find a requirement class.and to do this,the delivery first needs to find a requirement type.This we maintain in Transaction OVZI. So this entry was missing for a particular item category at your end.(it was not maintained for That item category and mrp type PD )I think system will search for the requirement type here.
    Next is requirement class should be assigned to the requirements type in transaction OVZH and the requirement class is defined in transaction OVZG where ATP check and requirements transfer can be activated.
    Pl suggest.
    Thanks in advance.
    Ulhas

  • How to find out if the stock is available for the sales orders

    hello gurus
    We have 25 sales orders.. for which we did not have any stock.. so we produced internally and now the stock is available physically and stock is updated in SAP as well.
    How can i know that for all the 25 orders ..if the stock is now available for all the orders.. we have a requirement that unless we have a stock available for each order we cant create deliveries.. againts the sales order.
    I would like to know what is the best possible way to check the stock availability for all the 25 orders at one time.
    Note : All 25 orders have different materials.. in them
    regards
    mohammed

    Hi,
    To check the stock availability tcode is MMBE, enter the material no, plant and storage location and then click the  EXECUTE button ,u will see the stock.
    For different materials , u ve to repeat the above steps.
    Reward points if it helps.
    Regds,
    Pallavi

  • Stop creation of reservation if no plant stock is available

    Hi Expert,
    I have one requirement like below:
    in cj20n, when we create reservation , the system should check stock is availavle or not.
    if on stock is available , then system should block.
    I have done some setting through checking rule, checking control, but not working. Do i go for ABAP development.
    Could please anybody help.
    BR,
    Morshed Alam

    We have managed this through user exit. Perhaps you can try the same.

Maybe you are looking for