Stock is increased and FI entry is posted in statistical GR for third party

Hello
I was trying to activate the functionalty for statistical GR in third party but STUCK due to following issues. For enabling this functionaltity I have checked "Goods Reciept" and "GR Non-Valuated" check in "Delivery tab" of PO.
     1. After creating Statistical GR through MIGO (101), stock has been posted in plant. I was expecting no movement in Stock .
     2. I was hoping there should not be in FI posting but FI entry is posted through statistical GR .
We are using third party process from many years but without statistical GR. Requirement from client is to post statistical GR without FI entry and no stock should be updated. Please advise if anyone has idea on this.
FYI--We have item category TAS and schedule line category CS in customisation. Also advise if above two settings in PO are enought to turn ON the statistical GR functionality.
Thanks for your help.
Regards
Arvind

Thanks AKPT for reply
As advised , pleae find enclosed screens for OMS2, PO and FI entry. FI entry might be wrong as while posting MIGO ..I was getting error "WE etnry is missing in table YFTFI_SUBST236 and I maintained some dummy GL accounts.
Regards
Arvind

Similar Messages

  • Wrong Posting in CO-PA for 3rd Party Sales & Cross Company Code Sales

    Hi,
    In Third Party Sales with Shipping Notification and Cross Company Sales the CO-PA report is not reflecting the correct material cost.  CO-PA is updating the material cost directly from the Material Master. Cross Company sales condition type PI02 & IV02 is using for pricing. IV02 is working perfect, but PI02 is not !
    In detail, for Third Party Sales with Shipping Notification, no material is available in the stock. In material master the material cost display as $ 10/EA. But the Purchase Order value is $ 15/EA. During Goods Receipt time system is taking the cost as $ 15. While Billing time to the customer, system is posting to the CO-PA the material cost as $10/EA. FI postings are perfect, but CO-PA posting is not correct. CO-PA and P&L reconciliation is not matching due to this issue !
    Waiting for the help.
    Best regards,
    Joby

    In user exit include ZXKKEU03 you should make the COPA COGS equal to the VPRS. Also you can't do a revaluation in COPA for the third party billing types.
    pls assign points to say thanks.

  • Sales Order and Purchase Order linkage in tables  for third party orders

    Hi all ,
    For third party process order s
    In which table can I find the Sales order and Purchase Order linkage .
    thanks
    ksr

    Hi Sridhar ,
    Refer Table EKKN for PO and SO Linkage.
    Table EBKN for PR and SO Linkage.
    Regards
    Ramesh Ch

  • Logic X and 9 looking for third party plugins in the wrong place Mavericks

    Hi all
    i'm having trouble loading up old sessions in logicX and Logic 9 with my recent upgrade of computer which came with mavericks.
    can anybody please help me!!
    Logic is searching for third party plugins like this:
    this is a real pain because when i replace the plugin with the exact same plugin from its propper location i loose all the settings that were originaly used.
    thanks in advance
    Mitch

    See if this helps: Find your hardware serial number.
                   and     About This Mac

  • Stock not updating after doing MIGO (gr) for third party sales

    i am doing third party sales, after creating PO with PR and updating stock through Migo , i am not able find the stock, but i can see through MB51 only , i am see the stock through MMBE or MB52

    Dear friend
    Hope you are clear about third party process
    In  third party process vndor supplies the goods directly to customer and the goods does not come to our premises at all
    In many of the scenarios that i have seen there is no MIGO itself done
    To have MIGO is purely optional in third party
    I am enclosing here with the threads which were discussed on the same
    Forum post in ERP - Sales and Distribution (SD) General: MIGO- why we do it in third party sales?
    MIGO- why we do it in third party sales?
    Forum post in ERP - Sales and Distribution (SD) General: Why MIGO is required in thirdparty scenarion?
    Why MIGO is required in thirdparty scenarion?
    The stock updation after MIGO is posted directly to consumption account and we dont keep the stock
    So it is not seen in MMBE or MB52 (which is a physical inventory orstock report)
    The stock is not there? How can you see that ?
    If still you want to see the stocks this is entirely against business logics and consult with your MM and FI colleagues (as this query is their area of operation)
    If the third party process is happening with item category TAB then stock updation will take place after MIGO and you can see the same in MMBE/MB52
    If not happening means there is some customization error with the PO from MM side Check with MM colleague
    Make sure if the item category is TAB then schedule line category is CB
    In VOV6 for schedulle line category CB
    NB is the order type
    0 is the item category
    E is the account assignment category
    Regards
    Raja

  • Link between Inbound Delivery and Sales Order for Third Party

    Greetings Gurus,
    My client is using a third party business model in a retail setting that fulfills sales order via purchase req --> PO --> Inbound delivery with GR posting --> customer billing document created through batch based on the delviery quantity ('G' in item billing relavence) --> vendor invoice reciept happens subsquently.
    My question is this, is there an inexpensive (performance wise) way to link the customer billing and the inbound delivery?
    Since the inbound is not in the doc flow i don't think VBFA will suffice. I think the best route would be via schedule line back up, but i have yet to find a link.
    There are process implications for this link for reporting and customer service which are a critical to the business. Point will be rewarded for sound advice.
    Thanks for your help.

    Hi Daneil,
    Through the document flow VBFA you can capture the PO number and the link for what you have asked can be found from table EKBE. check out for field BELNR.
    regards
    prasad

  • Migo and Delivery for Third Party Shipment

    I have configured third party shipment with statistical goods receipt.
    Due to government regulation (Mexico) we need to keep track on our inventory of this movement so I want to configure MIGO so the receipts are done with 101 E - Special Stock and after that a Delivery and Invoice
    If I try to do this I get error MIGO057 - Movement Type 101 E is not planned, I have take a look into OMJJ
    Should I change item line from TAS to TAB? And schedule line from CS to CB? Somebody has done this any tips?
    Thanks in advance,
    Carlos

    Hi,
    Please check in the PO, the account assignment category should be 1, i think it is E and hence creates the error
    Please check the third party account assignment category and change the PO account assignment category and try to do MIGO
    Please do that and revert if you need more details

  • Cost update for third party and individual purchase orders

    Hi,
    We went live in around 5 months back. Last month we changed the configuration so that costs for back 2 back purhcase order will be determined from goods receipt & third party purchase orders could be determined from logistics invoice verification. This is working correctly with the new documents which are being created.
    We have an issue with the document which are already created and posted. We want to update these existing billing documents so that they can pick the rigth cost. For these old transactions currently the cost is being picked from valuation segment of the material.
    I have tried resolving this through reorganization of infostructures & through sdvprsupdate but it does not work.
    Best Regards
    n

    Hi,
    We went live in around 5 months back. Last month we changed the configuration so that costs for back 2 back purhcase order will be determined from goods receipt & third party purchase orders could be determined from logistics invoice verification. This is working correctly with the new documents which are being created.
    We have an issue with the document which are already created and posted. We want to update these existing billing documents so that they can pick the rigth cost. For these old transactions currently the cost is being picked from valuation segment of the material.
    I have tried resolving this through reorganization of infostructures & through sdvprsupdate but it does not work.
    Best Regards
    n

  • Forecast and consumption in APO for Third-party order processing

    Has anyone tried to forecast in DP for the standard 3rd party order processing process in R3? The business wants to enter a forecast in DP, Release it to SNP and do planning as though it is a normal process. They also want the sales order entered in R3 to be passed to APO and consume the forecast. But, these sales orders with schedule line category CS don't transfer requirements and hence don't get passed to APO.
    Has anyone tried any other workaround/process for this 3rd party drop ships? The standard 3rd party order process still needs to be used in R3 since it creates the Req when the sales order is entered and there is no GR on the PO nor any delivery created for the shipment to the customer. The Vendor ships the product directly to the customer and send an invoice to us. We then invoice the customer.
    Any help is appreciated.

    None of the gurus have answered to this thread.
    So let me share my experience.
    The answer to your question would be NO- Unless someone has really a workaround which I suspect.
    We did speak with SAP on the same requirement as yours and SAP came back saying NO- There is no standard SAP provided solution.
    Having Schedule line category- CS which results in a Purch Req and also passng the requirement is an impossible task through standard SAP
    I tried many ways - however in the R3 Schedule Line config, you can maintain only one of them- Either generating a requirement or a Purch Req.
    <b>The workaround which I can think of- which your company might not agree:</b>
    Maintain stock at your internal location and change the sales order type from third party processing to a standard order type.
    As you will be forecasting for these materials, the requirements and receipts can be generated far out in the future and can be passed on to the vendor who will supply you in advance.
    I know this is not an optimal solution- However I cannot think of any workaround
    Just tried offering some inputs as no one else was responding

  • WVC54G setup for third party applications and also firmware query.

    I have resurrected someone's old WVC54G and installed it to work initially wirelessly to my netwark and then my Windows 7 64-bit laptop. I did an initial reset, then set up the ip address etc. to the system here, and everything seems to  work even though the viewer and recorder software installer gave a Windows error message.
    I'd like to be able to look at the camera via the VLC viewer application, and I see from another posting here that this should work.  Is there a guide anywhere showing how to do this? Ideally I'd like to understand how to interface the camera so that I can test various third party camera applications.
    Also, the Linksys setup software says the firmware version is V5.10, Feb 21, 2005, which seems a much higher number than it should be. Is this right?

    Try downloading the viewer and recorder utility from the linksys website under the download section which is pretty user friendly.
    To view it in VLC player, you can use the option 'open url' in file menu and type in http://your camera's IP
    The latest FW for wvc54g is ver. 2.11. The version you have mentioned might be software version.

  • Posting of travel expenses to third party vendor

    Hi,
    Is it possible to post travel expenses (e.g. Air travel) directly to third party vendor account (travel agent) instead of booking it to Clearing account.
    Regards
    Sarika

    Hello Sarika,
    Can you explain more? Your query is not that clear.
    Thanks and Regards,
    Raynard

  • Support for Third Party Apps when they take your money and don't respond

    Does Blackberry App do anything about third party apps that take your money and then don't give you what you paid for or respond?  I paid $4.99 for Jeweled game from getempower, it downloaded and worked a bit, then it said I needed to Register.  When I clicked Register, nothing happened, it just said "checking registriation" forever.  I clicked on the Support Email provided and it returned an error saying "We get too much spam so you can't email us anymore, so please go to our website for support."  So I went to the website www.getempower.com, and got to the Support form and filled it out, and it said "you cannot submit form until you choose the app" but when I tried to choose the app it wouldn't let me.  I can't see anywhere else on the web page to contact them. So I paid for the game but it won't let me get to it.  I looked at the reviews and it looks like several other people have had this same problem.  I guess I thought buying something through App World would be trustworthy - App World, do you stand behind the vendors you allow to sell on your site?

    Hi and Welcome to the Community!
    Firstly, as a user-to-user community, no one here can answer your question with any level of authority whatsoever. This site is not a channel for any formal communications with RIM. All support starts with the carriers, authorized resellers, and authorized service centers, all who can escalate cases into RIM at no charge to the end user...and that is the required path for formal support for issues such as yours (including requests for refund, if you choose to go that route). So, your escalation path is not here, in these forums. 
    But, have you tried removing and resinstalling the app? And/or clearing the AppWorld cache?
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Customer invoice for Third Party return and Credit Invoice???

    Hi All,
    Business needs third party return with vendor & customer Credit invoice.
    I am fully aware that standard SAP does not support this scenario.
    I am looking any other best way to implement this scenario in sap, if any body has worked on this.. I am thinking in below line:
    Changing VBUK-FKSAK and VBUP-FKSAA by using program once vendor invoice generated... but not sure its impact in other area. one impact I can see its making cost negative in invoice.
    Another option tried is to delink vendor & credit invoice by using 'B' Billing relevance, This is generating zero invoice if billing block is removed & PO has been created..
    Please advice
    Regards

    Dear Neeraj L,
                   Can you explain the process more in detail?
    Because,in 3rd party - returns will occur only after Customer rejects the goods from the Vendor. then goods has to be returned from teh Customer , but not from the Vendor.
    You might thought of - Returns from Customer & then return to Vendor- which is std process? Doesnt it fit your requirement?
    But in this case, there is no sales order link to Vendor returns.
    Regards,
    Reazuddin MD

  • Is there Java API available for third-party integrations with SCCM 2012? I went through the "Developer's Survival Guide", and it seems that SCCM 2012 SDKs only support C# and PowerShell

    Hi All,<o:p></o:p>
    My team and I are developing a software using java that works closely with IT management software such as SCCM. Our software will be highly dependent on data stored in SCCM. Basically
    our software will talk to SCCM to get information about a system managed by SCCM. To be able to do that, our software needs to use a java API that talks to SCCM. Is there a java API for SCCM 2012 that we can use? If there is not, what is the work around to
    this issue (integrate a java project with SCCM SDKs)? Any help is appreciated! Thanks!<o:p></o:p>

    Hi,
    As you mentioned, it seems that there is no available Java API for SCCM .
    Just curious, what's information you want to get from SCCM.
    Based on my experience, you could query the SCCM site database to get almost all the information.
    Otherwise, your question seems to be related to SCCM 2012. You may also choose to post there to get more effictive help.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Posting the Irecruitment Vacancy to Third Party bayt

    Hi
    Did anyone done Job posting from irecruitment to Bayt.com. If done kindly share the custom .xsl created for the same.
    Or please advice how to add flexfield values to JobPositionPosting.xsl that is complaint to job posting site ,
    thanks
    Siva

    There probably ins't anything wrong with the connection itself.
    It is the access to said Network, I am sure your problem can be fixed by careful reading and impamintation.
    http://docs.info.apple.com/article.html?artnum=106250
    Don

Maybe you are looking for