Stock Items as Expense

Hi,
Required some guidance on the following. How do i maintain a stock of items but they are not for sale i.e. they are used internally and counted as expenses? Which accounts do i need to create? What fields in my item master will reflect that its inventory only and not for sale? i'm managing GL accounts by Item group
Thanks & Regards
Aziz

Hi Aziz,
1 - Do not select sales item setup when you create the data. This will be your identifier that you are not selling this item and If you create a sales transaction this item will not appear in the selection list.
2. Update the the GL setup in the item group.
Hope this helps.
Regards,
Darius

Similar Messages

Non Stock Items not posting in AP Goods Receipt

Is it possible for SAP to post transactions for Non Stock Items in AP Goods Receipt?
I was hoping that it would perform the following, as it does for Stock Items:
Dr Expense                        xxx
Cr Allocation Account                  xxx
Then when the AP Invoice is raised
Dr Allocation Account          xxx
Cr Creditos Account                    xxx

I am currently using 2007A Sp 39

How to assign account assigment automatically Non Stock Item ?

Dear All,
How to assign account assignment automatically at PO level for Non Stock Item Material for expense charges ? Since our user does not familiar with the GL Account code.
Regards,
Setiadi

Setup for Automatic Account Assignment
SPRO-IMG - MM- Valuation Class and Account Assignment- Account Determination-Account determination without wizard
1. Define valuation control T Code OMWM
2. Group together valuation areas T Code OMWD
3. Define valuation class T Code OMSK
u2022 Account category reference
u2022 Valuation class
u2022 Material type / Account Cat Ref
4. Define Account grouping for movement type T Code OMWN
5. Configure automatic posting T Code OBYC
Maintain Transaction/ Event Keyu2019s for your Chart of Accounts
BSX - Stock Posting / Inventory Posting
PRD - Price difference
GBB - Offsetting entry for stock posting
WRX - GR/IR Clearing
Let me know if you need more detailed setup procedure-Switesh!
Edited by: Switesh Nage on Dec 4, 2011 9:33 AM

Journal Entry for non-stock Item while Good Receipt PO

In accordance to Accounting Rules, the EXPENSES of non-stock item purchase should be recognize
upon Good Receipt PO, journal entry should be created at the point time of GRN instead of invoice.
We would like to see this as part of the SBO standard accounting process as it is also important for
us to make sure the the software process is comply to the Standard Accounting Rules.
Thank you and Warmest regards,
Ong Siyu Kim
AFON PTE LTD
+65 6412 0686

Hi Martin,
I fully agree with this requirement. In Australia, the tax Office is asking us to recognise the expense in the profit and loss at the time of receiving products or services.
With SAP Business One, receipting inventory products through the GR PO will create a simpel journal entry:
Debit Stock
Credit Goods Receipt Not Invoiced
In the context of non inventory items, SAP Business One should do exactly the same:
Debit Expense account of the service item
Credit the Allocation Account (GRNI or other)
Currently, we have to create a big journal entry at the end of the month to recognise the expense of services that we have received but we have not received the invoice.
If you have any questions, feel free to contact me so we can discuss.
Regards,
Vincent Motte

PR and PO should be display in IWBK report for stock item.

Hi Exterts,
Our client requirement is to display PR and PO number in IWBK report for stock item as well.
I know PR and PO can be display in IWBK report for non-stock item but how we can display PR and PO for stock item,as PR is generated through MRP for stock item.
Please share your ideas on this.
Regards
Vishu

Vishu,
In typical MRP settings you "procure to stock" not "procure to order".
This means that there is no direct link between the PM/CS orders and any PR/POs created via MRP.
Subsequently you will not be able to show this data in IWBK.
However, we are currently designing a customer-specific report similar to IWBK that also counts the number of open POs for a given material on a PM/CS work order. The user can then navigate to ME2M (PO list) or MD04 (stock requirements list) to get further details.
PeteA

Sales order line for Non Stock items progressed to Closed status, need to be Cancelled.

Hi,
First time posting to this community, I hope someone can help.
Currently we have a setup where non stock items are being added to sales order lines (charges, etc.).
These lines are being progressed through to Closed status automatically.
Users are reporting that they have entered the line in error and would like to change the status of the line to Cancelled.
We are unable to return the material (RMA) as it is non stockable/transactable etc.
Current workaround is to adjust the stock and make finance aware so that the line does not get invoiced.
However, the system still shows that the line is closed (i.e. provided to customer) which is not correct.
Is there any way of getting the line to a status of cancelled?
Your help is very much appreciated.
Regards
Tim

Hi Arif,
Many thanks for the warm welcome.
I'm thinking the only course of action I have for future, is to make the items stockable/transactable/returnable such that an RMA can be performed if added in error.
We can put a large qty into stock at zero value.
Thanks for your help in any case.
Tim

Variable size item Vs Stock item

Hi Experts,
I have a doubt regarding the use of variable size item over standard stock item. I will give an example as under.
I have an item called cable which is to be added to a header material. This cable will be used in many header materials. I tried using variable size item as an item category and given the following parameters
Size 1 as 5 M(UOM)
Formula (L1)
Number (1) ST
System calculates the value as 5 M for qty var sz item
In the item over view screen, quantity against the material 1 ST
My query is instead of giving the qty as 5 M and use a formula, what if i directly give the item as stock item "L" and directly define the qty as 5M. If there is no difference between the above, why should we use the variable size item? instead we can directly calculate and give the qty for the item right. Kindly clarify the application of variable size item over standard stock item category.
In both the cases I will be having one material code in the system and the qty will be changed in the respective BOM of two different header materials.
Regards,
Sridharan M

Hi
In addition to the stock keeping unit you can provide the details like length, width and thickness, say for example if you want to fabricate a metal part. You may need length width and thickness of the plate to be used for fabrication. This details you will be entering in the variable size items and using the formual you can calculate the required quantity in KG.
This kind of variable size items you need not calcualte the weight of the material you just need to enter the sizes as per the drawing as you prepare the BOM.
This varies with respect to size.... Variable Size Items
Soundar

Unit of measure for Stock and Non-stock Item in CJ20N

When I attach Material to an activity (item Category N Non-stock item) in Project Builder (CJ20N), It is peaking its Base unit of Measure as unit. Now when I try to change it, it is showing an error
Item category N: Only base unit of measure M allowed
Message no. CO344
But for the same material if I change the item Category to L Stock item, then it allows me to change the unit.
Please guide me regarding this Behavior. Is there any customization, by doing which it will allow me do the same for Non-stock Item or It is not Possible.

firstly I am assuming that the activity is internal processing type - doesn't matter really
now to attach a material select actvity and from the template area click and drag material which will open the material detail screen in the work area
because it is a non stock item I am assuming text description - in the requirements qty you enter the qty and next to it the units - changeable
if you choose a material number maintained as material master then obviously the unit will be from the material master.
If you are using an externally processing activity then in config check OPUU for the network type and see if order unit has been populated - that might be the problem

Goods receipt indicator is PO is not set for Stock -item

Hi Gurus,
I have created PO for a raw material but it is so strange that the Goods receipt indicator in Delivery tab is not set (it is greyed out also). Then, I cannot do Goods receipt for PO anymore.
Normally, this Goods receipt indicator is set automatically if material is stock-item.
Can anyone help me find out the reason?
Thanks,
Hong

Hi,
For the material type RAW MATERIAL , aganist your plant ( Which is given in the PO) have you activated QTY UPDATE check box?
Check in the transcation OMS2
Select your material type and click on the Qty update / Value update ( Which is in the left hand side window).
Check QTY UPDATE check box aganist ur plant code. If not activated, check / activate check box.
If this check box is activated, then only GR checkbox is activated in the PO - Delivery screen
Regards
KRK

Out of Stock items

When creating a sales order ,
Is it possible for the item availability check to show items which are out of stock?
Clients request is as follows:
This is the box (item availability check ) that I am after, at the moment it pops up when we try to put on a sales order for a product that isnt in stock and doesnt have any on purchase order, Preferably we would like this box to appear if physical stock isnt available and not take into account whether there is any on purchase order or not.
Is there any other way to show out of stock item when creating a sales order apart from using the remarks box and then form settings?
Edited by: Darpal Thiarha on Mar 18, 2008 12:31 PM

The existing functionality of Item availability Check could not be changed. You could enable the In Stock column (from Form settings) to see current onhand quantity for that Item in the Sales Order Rows.

Returning non stock items from a return sales order

Hello Everyone:
I have a return sales order that I am receivi9ng an error meesage on for only two of the line items...
The Error Message is "update Control of movement type is incorrect (entry 651 X__L)...the other items on the sales order that are being returned are not having this issue only these two non stock items.
i looked in OMJJ and see my movement type and everything....I am making the assumption that this is due to the material type being non stock...they do not have a MRP view either....the VOV5 also shows the item category for the non stock item with DN...what am I missing...please help...thanks in advancve...

Thanks for you replies...However I would not want a stock transport order receipt for this which is what the "X" would be...this is a customer return from a sales order...again this works for stock material that is being returned by the customer...it is not working for a non stock material only. That is my issue..it is only erroring out on the non stock item category only....I am MM and have stepped into a position that was previiously handled by another...I have not ran into this error before so help would be appreciated.....Thanks in advance...

Is it possible to add value item and non stock item in one billing?

Is it possible to add value item and non stock item in one billing?

Hi,
Yes,it is possible .Take example of service scenario,where material used in servicing and service charges(labour) can be billed in single invoice.
Billing document type,Customer and other header data should be same.
Reward points if useful
Regards,
Amrish Purohit

The sum of the confirmed quantity exceeds the sum of stock items

Hi,
I have two sales order. Material is same. Both of them related project stok.
First sales order's qty=1. I created purchase order and post goods receipt.
Second sales order's qty=2. I created only purchase order.
I cannot create delivery for first sales order. System giving message.
Information message : The sum of the confirmed quantity exceeds the sum
of stock items
20000978 10 Only 0 ST of material 7ML18301CF available
20000978 10 An item with no delivery quantity is not permitted. Item will be deleted.
But I have a 1 qty on project stock.
Please help me.

hi,
this is to inform you that,
please run this report in SE38, SDRQCR21 if you have any inconsistencies in the system.
it seems there is an issue with MARD-DISKZ & please correct it.
but i have a doubt MB51 is material document llist. why you are checking stock there.
please confirm.
regards,
baljia
Edited by: balaji timmampalli achari on Nov 17, 2010 9:00 AM

Item Category N (non-stock item) in BOM creation - Preq Generation

Hi All
I have a material component that is planned in APO and not in ECC6. We would like to keep the one BOM for the finished good. Problem is that when we perform the backflush in ECC6, the system wants to backflush the material and causes errors due to missing stock.
So I assigned the material as a non stock item in the BOM but the system will auto generate a purchase requisitions for Non stock bom components (item category N) when the process order is created. It is possible to turn off the auto creation of the purchase req for non stock bom components?
I have tried the following:
- Explosion type in item data, created new key with 'Switch off planning' indicator set in system configuration
- created new 'Z' item category with inventory management de-selected
Both approaches causes system error: Puchase data of material in not maintained
I also tried leaving as a stock item with the bulk material indicator selected in the item data. This does not work as the cif will then exclude the component when data is transferred to APO
Funny enough, the system does not generate a purchase req for non stock bom items when using Repetitive Manufacturing. Any help will be greatly appreciated
kind regards
Grant brockelbank

Hello Vivek
Thank you for your response
The item is a non stock item. I do not want this item to be backflushed at all. This can be achieved using the 'N' non stock item category but the problem is that the system will attempt to generate a purchase requisition when the process order is created.
I do not want the system to generate a purchase req in ECC6 as this item is a planning material that is planned in APO (used for medium to long term planning in a simulation version). We are hoping to use the one Bom for ECC6 and APO planning. The generation of the purchase reqs is a bit of a waste as we will never convert them and there is potential to cause issues for purchasing.
Any other thoughts?
Thanks again for your help
kind regards
Grant

MIGO Print label WEE1 for non stock items from GR for PO

Hi,
I added logic to print new label into printing program MZ07DETI which is printing labels for stock items. My label is for non stock items. The problem is that for non stock items printing process is not triggered. I created PO with Account Assign. Category F, P or K no material number and no storage location. For this type of PO no print possible during GR posting. Is any set up available in IMG to make it work. I appreciate any response.

Hi,
Please check up if there is any default value at the plant level;in case of such default,the system will post to the GL Account defaulted,not with standing the "standard item category".Better checkup if any cost center /order has been assigned.
The GL item is defaulted thro'the item category.If both the goods and services have been defaulted to the same GL Account,then not with standing the type [ie] whether goods or services,the system will post tot he same GL Acct.
Hope this helps.
Regards.
Ramesh

Stock Items as Expense

Similar Messages

Maybe you are looking for