Stock Level after PGR

I am testing and I performed sales return for 1 item which has 1 as quantity.
Then after that, I performed "post goods receipt". I checked the stock level on MMBE and my stock did not change.
Is that stock level suppose to get one more stock? If yes, any idea where I did go wrong with my configuration?
Please help me. Thank you.

Hi Anwar,
Its as per standard SAP,
When you do a PGR, Returns stocks are updated so presently you might be checking the "unrestricted stock" at MMBE.
Now if you check returns stock, you will get that updated stock there.
For more understanding, perform that entire test case again as per following steps :
1) Note down MMBE stock values for Unrestricted & returns stock.
2) Create returns Order, returns delivery & PGR also ensure that Material document has been created successfully.
3) Note down MMBE values again for that Material/SKU for Unrestricted & returns stock.
4) Further you can try using movement type - 453 to post same returns stock into unrestricted stock.
5) Note down MMBE values again for that Material/SKU for Unrestricted & returns stock.
I hope your issue would be fixed.
Best Regards,
Anubhav

Similar Messages

  • Customer consignment stock- REPORTING stock level & goods depatched

    Hi all
    I'm looking for a report (or reports) which shows the following (bare in mind that this will all be customer consignment stock):
    - the delivery numbers
    - the previous month's stock level
    - the quantity of goods despatched the following month with a rolling calculation
    - monthly invoice values
    - remaining stock levels (after current months goods have been issued and invoiced)
    I'm aware that MMBE/ MB58 shows the current stock levels, however I'm hoping there is a report in SE16 which shows it as a report structure.
    I understand that this is a lot of info requested by myself however any information would be appreciated.
    Thanks
    / Vicky

    Dear tortyv,
    As per my understanding of the requirement,
    You please check the "VL06" report if it satisfies your requirement you enter the execution parameters and execute.
    System will give the list of out bound deliveries. Select one of those and click the details icon (ctrlshiftf3) according to the item view or headder view.
    If it does't suit you have to go for z report.
    I f you want that please provide the input fields in order to fetch the required data for the report.
    Thanks&Regards
    Raghu.k

  • MB51 - column for including stock level

    Hi,
    does anyone know if there is a standard report in R/3 which can display MB51 information and also include the stock level after each docuent/movement.
    I guess this can be quickly done using ABAP, but I just wanted to check first if any standard reports exists for this.
    Thanks in advance:-)
    Br,
    Lars H

    as I said, this is not an easy task, and your performance will become worse.
    MB51 is already a transaction with a poor performance if you have some million records in MKPF and MSEG.
    for your goal you would need to calculate the stock level yourself for each movement.
    If you want see how such is done, then debug MB5B transaction.
    you only ) need to enhance this then to calculate only the unrestricted use stock.
    this means you start at a month end quantity and then you need to read each movement and add or subtract or ignore the quantity to finally know what the stock at a certain day was.
    Further you would need to read several MARD or MARDH records  (starting points for calculation)  to get the total unrestricted use stock.
    good luck.

  • Stock Update after Sales Return

    Hi,
    My stock in store A is 100. I issued 20 qty to customer through sales. Now stock came down to 80.
    Now customer returned me 5 qty back.
    I created return order in sales and I returned the 5 qty back.
    But it is not updating stocku2026stock is still 80u2026it should be 85.
    How to take that 5 qty back to our store A.
    What will be the MVT to take it back?
    Thanks & Regards,
    Utsav Agrawal

    Hi Raman,
    It is not updating stock after PGR...It is showing return qty as 5  in return coloumn  in MMBE.
    My question is how to get back that 5 qty again in my store.
    Uts

  • Update Current Stock levels

    Hi i am currenlty having a problem with some pl/sql and wondere if somebody could help me. Im trying to write a trigger so that when a client chooses their product it deducts the amount the client has chosen from the products stock list. Here is what i have so far:
    CREATE OR REPLACE TRIGGER "STOCK"
    AFTER
    insert or update on "ORDERLINE"
    begin
    update products p set product_stock =
    (select sum(p.product_stock - ol.quantity) from products p, orderline ol
    where p.product_id = ol.product_id);
    end;
    currently this seems to be adding high numbers to the stock level for all products and setting them the same i need to have it do the calculation on seperate products
    Thanx in advanced Chris

    user11967314 wrote:
    Ok the trigger works wondefullyNo it does not. It only works "wonderfully" in a single session mode. In multi-session mode it is a recipie for a deadlock. Assume user1 orders product1 and then product2 while user2 orders product2 and then product1. Both users order first item at the same time. So trigger in user1 session updates and therefore locks product1 row in table products while user2 session updates and therefore locks product2 row in table products. Now user1 orders product2 and since user2 has product2 row in table products locked, user1 session waits for that lock to be relased. Meawhile user2 orders product1 and since user1 has product1 row in table products locked he waits for that lock to be relased. Voila, we have a deadlock.
    SY.

  • Replenishment upto max. stock level during SNP heuristics run.

    Hi Experts,
    As per the requirement from client, we need to configure the setting of replenishment upto max. stock level during SNP heuristics run.
    I am using below settings in R/3 for achieving the expected results.
    (R/3 ) MRP1 u2013
    Lot size                       HB               Replenish to maximum stock level
    Maximum stock level       20,000
    (APO) Targ.Stk Lvl Methd   5 u2013 in APO u2013 product master -   lot size tab.
    Still, after heuristics run, the requisitions are getting created equals to forecast value. It should get generated as max. stock level maintained.
    Could anyone share their experience regarding this? Am I missing some additional setting?
    Inputs are highly appreciated!
    rgds/Jay

    Dear Jayprakash ,
    If the requirement is that  you have to replenish upto a certain stock level then instead of maintaining the  Max Stock level you can simply maintain
    SB : Safety stock from product master
    and in the  Safety stock field maintain the quantity as desired ( in this case 20000 ) . This probably will solve the problem  in your case . You may not require  to maintain Max stock level .
    Target stock level in heuristics also works fine with the following settings
    make sure you maintain
    Target stock level method as =5
    In Maximum Stock level  = maintain the quantity desired  ( 20000 in your case say )
    do not maintain  any safety stock method keep it blank .
    then location heuristics generates PR according to the  the maximum stock level.
    If still it is not working plz let me know what other settings you are maintaining probably we will find a way out .
    Hope it helps .
    Thanks
    Debsankar

  • Vb type in house production with controls on Max stock level, considering -

    Dear friends,
    Please think of possible solution to map the follwing scenario,
    my client having vb tpe scenario for in house mfg product, As the it reaches to re-order level it generates planned order ,
    eg mrp type -vb, reorder point-200 ,min lot size -150 and max lot size 500,
    and Max stock level - 1500   and his lotsize -EX,
    here after creation of planned order he wants a control , that when it is converted to process order , in change mode , he should able to change the order qty  in such way that , it   Need to consider open process orders and Available Stock
    (Unrestricted & Quality) also in same Plant
    e.g. Max Stock Lvl is 500 Unrestricted Stock 100 Quality Stock 50 open
    ProcOrder is 200. If user trying to change ProcOrd 250 it should allow
    to change ProcOrdr of 150 only.
    please sugeest how to set the controls.

    Hi Dhar,
    In av. check scope (OPJJ), include the stocks which you wish to consider eg: quality insp. stock etc in addition to unrestricted stock. The system will then create planned orders only for the needed items.
    If user tries to change the qty of the order to more than required, MD04 will show an exception message. Hope this meets your need.
    If helpful award points
    Regards,
    Vivek

  • Inventory Report for current stock and Safety, Minimum etc stock levels

    Hi,
    Is there any report available to view the current stock against the minimum, safety stock levels so that the user can plan further actions accordingly.  Can anyone please guide me on this.
    Thanks in Advance.
    Regards,
    Laxmi

    Hi Shailesh,
    Is there any way we can include some extra fields into this MC.9 report - i tried but could not find anything.  Can you please help.
    Regards,
    Laxmi

  • Report  from system on different stock levels-min, max stock levels

    hI gURUS,
    Is there any Standard Report  from  SAP system to see on different stock levels-minIMUM stock, maximum stock levels

    Hi,
    MMBE will not give stock level min and max  that is maintained in material master MRP view. I think you need to make a z report for th same or may be through query.
    Regards
    Sangeta

  • Restrict PO  based on the maximum stock level qty in MMR

    Hi
    We have maintained Maximum Stock level in MRP1 in Material Master. Is there any facility which can restrict the Purchaser, not to raise any PO more than maximum stock level qty which is maintained in Material Master ??? how to do ?
    Is there any user exit or warning mesge settings?
    Edited by: Jayakumar Raju A.S on Jan 13, 2010 8:55 AM

    If you want do such check then you have to do that in a userexit.
    I am personally the opinion that a purchaser does not extend the PO quantity just for fun. Maybe he gets a better price if he procures a little more. It is probably a lack of training and knowledge about each others work, that a buyer does not understand what the maximum stock level is , and the planner may not understand the particular issues a buyer deals with daily.
    Bring those two together an let they explain each other the reason for the maximum stock level and the reason why the  order quantities are changed.  Maybe they will finally change the maximum stock level, maybe the buyer will not change the quantities anmore without discussing it first with the planner......

  • Maximum Lot Size & Maximum Stock Level

    Hi All,
    In MRP 1 view we have Max Lot Size & Max Stock level, how the system give me requirement if i'm maintaining these fields.
    Regards
    Ashok

    Hi Ashok,
    If you mainatain Max lot size system will check for this qty & it will not allow to generate PR or planned order more than this qty in MRP run & Max stock level is the stock for replinshment where lot size if replinishing.
    Regards
    Rang

  • Goods Issue to increase the stock levels in a plant

    Folks,
    I am not a MM guy and I am trying to increase the stock levels in a plant using a Goods issue.
    1.     Can I do the Goods Issues without reference to a Purchase Order? If so, how can I do this
    2.     What are the relevant movement types when GI is made w/o reference to a Purchase Order?
    3.     Can GI be made with reference to any other entity/object other than PO?
    Thanks

    1. Can I do the Goods Issues without reference to a Purchase Order? If so, how can I do this
    No u can't ..u have to do Goods receipt for a PO
    Raise a PO for the same material and do GR
    2. What are the relevant movement types when GI is made w/o reference to a Purchase Order?
    u cant do GI for PO
    3. Can GI be made with reference to any other entity/object other than PO?
    GI aganist cost centre, production order, reservations ....
    the easier way to bring in stock of a material is to do intial entry thru MB1C with mvt type 561.

  • Use of max stock level w/o lot size HB

    hello champs..
    need  a help on below functionality
    Can I have the functionlity of max stock level without using "lot size - HB" in material master.
    my requirement..tht system should not create any procurement proposal if stock reachs at max level..
    but with this i am using min lot size also..and this functionality got vanish if I use "lot size=HB" ..system dont see min or max lot size..it just create the proc proposal for the qty upto max stock level..
    my requirement
    for a material max stock level -100
    min lot size - 50  , max lot size 80
    and if my stock is 30 ,and my reuirement is for 80..system should not cross the max stock level and should create the prc proposal for 70 only..
    pl share your thoughts on this..I'll appriciate wih necessary reward points..
    Br
    Sumit

    Hi
    thanks for reply..but i am not sure whther w/o using HB max stock level will be considered or not..
    i yet have to test the same but as per SAP , if you want t maintain themax stock level in the plant , lot size should be EX
    is this undertsnding is okie..
    thx in advance
    BR
    Sumit

  • Max stock level and reorder point for all the materials

    Dear experts,
    Is there any standard mm report that will give the details of max stock level and reorder point details for all the materials?
    Thanks in advance,
    Regards,
    Krish

    Your requirement can be pulled from table MARC. I dont think there is a standard report to meet your requirement. You can meet your requirement through SAP Query though.

  • Minimum stock level

    Hi all,
            My scenario comes like this ...i have two service center"A" and "B"where i ll maintain some minimum stock level of spare parts.
           each service center will get service arder individually for spare parts.service center's issue spare parts against order from minimum stock level.  so i maintained make to stock scenario where order is full filled with minimum stock level.so planning has to cover minimum stock level.so i mapped in safety stock.
          But the safety stock level varies with some period.so i need an upload program of safety stock in period oriented manner.
          then fullfillment of service order also based on priority wise  .becas spar parts for that sevice center are obtained from some other plant ...which should maintain a plan which determaine priority to give spare parts to "A" and "B" in percentage of priority
    so i require  1.how to go for upload of safety stock with periodically?
                      2.How the priority can be given for allocation to verious service center.?\
    Regards
    suresh

    Hi,
    For upload the safety stock you can use BDC or LSMW.
    for periodic upload try through background program with the help of ABAPer.
    Regards,
    Nilesh

Maybe you are looking for

  • HOW TO SET UP 2 AIRPORT EXPRESS AT HOTEL ROOM

    Hello, I know this subject probably have been talk alot on this formum but I cant find the tread. My question is how to you set up a private network in hotel room with 2 airport express when the hotel only offers wireless in room and not a ethernet c

  • Problem with Acrobat Pro X trial

    Trial screen for acrobat pro x, is blocking access to original adobe. Tried deleting & see no more file & it is still doing it.

  • Generating events such as "push buttons" in ABAP

    Hi, Is it possible to make code in ABAP that given a screen number can generate events for that screen. For example create a Z program that given the input parameters screen name and transaction, do something like: screen 101.pushChangeButton.? regar

  • Syncing iphone on a new Mac

    Now I'm really upset.. I recently bought a new MBP, and upone connecting my iphone Itunes comes up saying "there are app on your iphone which are not present here blablabla, do you you want to transfer these app to itunes library? If you don't transf

  • Invalid UOM error

    Hello Experts, Whenever i open item in Item master data to see details an error showed only "Invalid UOM  " Help me out what things i will check to remove this error Thanks & Regards