Stock management by agent

Dear Expert,
Please help me find a solution, the scenario is:
We have an agent help us to manage one stock of us, but the agent has it own SAP system, we have our own SAP system, now there is no link between us. We want the agent can manage the stock of our system for some special scenario such as repair, produce, not for all scenarios.
We only have one idea that set up one stock in agent's system, and use RFC to synchronize the inventory, but it is too compex. Any effient soultion?
I will reward you!!!
regards
Gang

Hi Gang,
thats what i mean since that material belongs to you, in system you make a logical sloc & shift material whenever you practically need to send to him & also while sending you can send with a copy of printout.
& since it is your stock it is under your control at the same time by having seperate sloc you can bifiurcate what is lying with agent.
Regards
Rang

Similar Messages

  • Access Manager Policy Agent and Oracle AS

    Hi,
    my system uses Oracle Application Server. The security dept use Sun Access Manager. I need to integrate the security of the Oracle system with the policy agent. Where this gets a little confusing is that one of my developers tells me that this is difficult to implement and that Sun arent planning on supporting the Oracle AS in future.
    What I would like is some clarification from the horses mouth so to speak. In particular is it possible to integrate the policy agent and Oracle AS, and are Sun committed to supporting and developing for this.
    Thanks,
    Andy.

    "Where this gets a little confusing is that one of my developers tells me that this is difficult to implement"
    "it is NOT an implementation but an integration ! difficult ? why ?"
    "and that Sun arent planning on supporting the Oracle AS in future."
    There is a PA 2.2 for Oracle 10g ! It is the latest version(2.2 I mean). I don't see any reasons why Sun should not continue. But it is ONLY my point of view...
    "What I would like is some clarification from the horses mouth so to speak. In particular is it possible to integrate the policy agent and Oracle AS, and are Sun committed to supporting and developing for this."
    Of course it is possible because you can find the PA that will integrate your Oracle AS with a Sun AM.
    1) Please read the documentation.
    http://docs.sun.com/app/docs/coll/1322.1
    Download the one for Oracle and read also the user guide.
    PA are very easy to integrate if you know what you do... Espec. und. the AM auth and sso... If you can be helped by a AM guy from your comp. it is welcome... It is a j2ee agent and of course the PA will make what is necessary to redirect you to AM at login time and later to auth. your request...2)
    2) Download the soft and do the job :-)
    Product Downloads
    Sun Java System Access Manager Policy Agent 2.2 for Oracle Application Server 10g
    http://www.sun.com/download/products.xml?id=455d52ed
    I did plenty of int. with Sun/Bea/Tomcat AS(don't forget there are also webserver agents like Apache PA) with AM and it is not a big deal. Not Oracle, but it is an AS and I don't see why it should be difficult...
    Hope this helps a bit.

  • Secondary Sales and stock Management

    Dear Experts,
    Can any have the solution for Secondary sales and stock management.How can we manage this using the standard functionality of Business One by using UDT, UFD and Formatted search.
    Awais

    We also bill our distributor directly but to track his sales, we are planning on doing something similar to Marcia:
    Use your main database with Distributor as your customer. Bill them accordingly.
    Setup another database with each Distributor as a warehouse.
    Enter the opening balances for each distributor.
    (If you are doing this exercise at the end of the month) Printout a report of all goods sold to the distributor.
    Transfer the stock to his warehouse (from the list of goods sold)
    Issue the appropriate stock to some waste warehouse to get the same output as the closing balance of that Distributor.
    Ex: Your distributor has 100 items as OB. He purchases 2000 from you and has 300 left in stock at the end of the month. You would transfer 2000 items in his warehouse. Then transfer 1800 to another warehouse to get 300 as closing stock.
    This way, you could keep closing balances of distributors as end of the month while still billing them in one go.

  • Offline        17:31:09 svc:/application/management/common-agent-container-

    Hello! guide me to resolve this error when trying to start SMF service "common agent container"
    # cacaoadm status
    default instance is ENABLED at system startup.
    default instance is not running.
    # cacaoadm start
    Error when trying to start SMF service: [svc:/application/management/common-agent-container-1:default].
    # svcs -a|grep common-agent
    offline 17:31:09 svc:/application/management/common-agent-container-1:default
    Thanking you.

    *** continued from previous reply *****
    clnode1# cacaoadm list-modules
    List of modules registered:
    com.sun.cacao.agent_logging 1.0
    com.sun.cacao.cached_connector 2.2
    com.sun.cacao.command_stream_adaptor 1.0
    com.sun.cacao.dtrace 1.0
    com.sun.cacao.efd 2.2
    com.sun.cacao.instrum 1.0
    com.sun.cacao.invoker 1.0
    com.sun.cacao.jaxws 2.1
    com.sun.cacao.mib2simple 1.0
    com.sun.cacao.rbac 2.1
    com.sun.cacao.rmi 1.0
    com.sun.cacao.session 2.2
    com.sun.cacao.snmpv3_adaptor 1.0
    com.sun.cacao.watchdog.heartbeat 1.0
    com.sun.cacao.watchdog.probe 1.0
    com.sun.cacao.webserver 2.2
    com.sun.cluster.cfgchk 1.0
    com.sun.cluster.cluster 1.0
    com.sun.cluster.configaccess 1.0
    com.sun.cluster.dataservices 1.0
    com.sun.cluster.devicegroup 1.0
    com.sun.cluster.dpm 1.0
    com.sun.cluster.event 1.0
    com.sun.cluster.event_mib 1.0
    com.sun.cluster.failovercontrol 1.0
    com.sun.cluster.ganymede 1.0
    com.sun.cluster.ipmpgroup 1.0
    com.sun.cluster.logquery 1.0
    com.sun.cluster.node 1.0
    com.sun.cluster.quorumdevice 1.0
    com.sun.cluster.rgm 1.0
    com.sun.cluster.transport 1.0
    com.sun.cluster.zonecluster 1.0
    com.sun.scn.SolarisAssetModule 1.0
    com.sun.scn.base.SCNBase 1.0
    com.sun.scn.offering.ProductRegistration 1.0
    com.sun.scn.offering.SoftwareUpdate 1.0
    com.sun.scn.sensor.Sensor_Module 1.0
    clnode1#
    ***Note that module " com.sun.cluster.zonecluster 1.0 " is added after CAC patch upgraded to 123893-10***
    **** The default OS dependency modules are in /etc/cacao/instances/default/private/modules****
    clnode1# ls -l /etc/cacao/instances/default/private/modules
    total 98
    -rw-r--r-- 1 root sys 627 Dec 6 2006 agent_snmp_events_mib.properties
    -rw-r--r-- 1 root sys 56 Apr 25 20:57 com.sun.cacao.auth.session.properties
    -rw-r--r-- 1 root sys 2399 Apr 25 20:57 com.sun.cacao.auth.session.xml
    -rw-r--r-- 1 root sys 56 Apr 25 01:11 com.sun.cacao.cached_connector.2.2.properties
    -rw-r--r-- 1 root sys 883 Apr 25 01:11 com.sun.cacao.cached_connector.2.2.xml
    -rw-r--r-- 1 root sys 56 Apr 25 01:11 com.sun.cacao.command_stream_adaptor.2.2.properties
    -rw-r--r-- 1 root sys 995 Apr 25 01:11 com.sun.cacao.command_stream_adaptor.2.2.xml
    -rw-r--r-- 1 root sys 56 Apr 25 01:11 com.sun.cacao.dtrace.properties
    -rw-r--r-- 1 root sys 957 Apr 25 01:11 com.sun.cacao.dtrace.xml
    -rw-r--r-- 1 root sys 56 Apr 25 01:11 com.sun.cacao.efd.2.2.properties
    -rw-r--r-- 1 root sys 1105 Apr 25 01:11 com.sun.cacao.efd.2.2.xml
    -rw-r--r-- 1 root sys 56 Apr 25 01:11 com.sun.cacao.instrum.2.2.properties
    -rw-r--r-- 1 root sys 1010 Apr 25 01:11 com.sun.cacao.instrum.2.2.xml
    -rw-r--r-- 1 root sys 56 Apr 25 01:11 com.sun.cacao.invoker.2.2.properties
    -rw-r--r-- 1 root sys 1076 Apr 25 01:11 com.sun.cacao.invoker.2.2.xml
    -rw-r--r-- 1 root sys 56 Apr 25 20:57 com.sun.cacao.jaxws.2.2.properties
    -rw-r--r-- 1 root sys 3417 Apr 25 20:57 com.sun.cacao.jaxws.2.2.xml
    -rw-r--r-- 1 root sys 56 Apr 25 01:11 com.sun.cacao.logging_manager.2.2.properties
    -rw-r--r-- 1 root sys 893 Apr 25 01:11 com.sun.cacao.logging_manager.2.2.xml
    -rw-r--r-- 1 root sys 56 Apr 25 01:11 com.sun.cacao.mib2simple.2.2.properties
    -rw-r--r-- 1 root sys 2804 Apr 25 01:11 com.sun.cacao.mib2simple.2.2.xml
    -rw-r--r-- 1 root sys 56 Apr 25 01:11 com.sun.cacao.rbac.2.2.properties
    -rw-r--r-- 1 root sys 1285 Apr 25 01:11 com.sun.cacao.rbac.2.2.xml
    -rw-r--r-- 1 root sys 56 Apr 25 01:11 com.sun.cacao.rmi.2.2.properties
    -rw-r--r-- 1 root sys 950 Apr 25 01:11 com.sun.cacao.rmi.2.2.xml
    -rw-r--r-- 1 root sys 56 Apr 25 01:11 com.sun.cacao.snmpv3_adaptor.2.2.properties
    -rw-r--r-- 1 root sys 2039 Apr 25 01:11 com.sun.cacao.snmpv3_adaptor.2.2.xml
    -rw-r--r-- 1 root sys 56 Apr 25 01:11 com.sun.cacao.watchdog.heartbeat.2.2.properties
    -rw-r--r-- 1 root sys 2514 Apr 25 01:11 com.sun.cacao.watchdog.heartbeat.2.2.xml
    -rw-r--r-- 1 root sys 56 Apr 25 01:11 com.sun.cacao.watchdog.probe.2.2.properties
    -rw-r--r-- 1 root sys 1744 Apr 25 01:11 com.sun.cacao.watchdog.probe.2.2.xml
    -rw-r--r-- 1 root sys 56 Apr 25 20:57 com.sun.cacao.webserver.2.2.properties
    -rw-r--r-- 1 root sys 2843 Apr 25 20:57 com.sun.cacao.webserver.2.2.xml
    ****The solaris cluster dependecies modules are in /etc/cacao/instances/default/modules****
    clnode1# ls -l /etc/cacao/instances/default/modules
    total 104
    -rw-r--r-- 1 root sys 627 Dec 6 2006 agent_snmp_events_mib.properties
    -rw-r--r-- 1 root sys 1170 Dec 6 2006 com.sun.cluster.agent.cluster.xml
    -rw-r--r-- 1 root sys 1174 Dec 6 2006 com.sun.cluster.agent.config_access.xml
    -rw-r--r-- 1 root sys 2916 Mar 23 15:21 com.sun.cluster.agent.dataservices.xml
    -rw-r--r-- 1 root sys 1829 Dec 6 2006 com.sun.cluster.agent.devicegroup.xml
    -rw-r--r-- 1 root sys 1312 Dec 6 2006 com.sun.cluster.agent.dpm.xml
    -rw-r--r-- 1 root sys 1168 Dec 6 2006 com.sun.cluster.agent.event.xml
    -rw-r--r-- 1 root sys 1525 Dec 6 2006 com.sun.cluster.agent.event_mib.xml
    -rw-r--r-- 1 root sys 1004 Dec 6 2006 com.sun.cluster.agent.failovercontrol.xml
    -rw-r--r-- 1 root sys 2064 Dec 6 2006 com.sun.cluster.agent.ganymede.xml
    -rw-r--r-- 1 root sys 1963 Dec 6 2006 com.sun.cluster.agent.ipmpgroup.xml
    -rw-r--r-- 1 root sys 2066 Dec 6 2006 com.sun.cluster.agent.logquery.xml
    -rw-r--r-- 1 root sys 1636 Dec 6 2006 com.sun.cluster.agent.node.xml
    -rw-r--r-- 1 root sys 1692 Dec 6 2006 com.sun.cluster.agent.quorumdevice.xml
    -rw-r--r-- 1 root sys 2603 Mar 23 15:21 com.sun.cluster.agent.rgm.xml
    -rw-r--r-- 1 root sys 1475 Dec 6 2006 com.sun.cluster.agent.transport.xml
    -rw-r--r-- 1 root sys 2478 Mar 23 15:21 com.sun.cluster.agent.zonecluster.xml
    -rw-r--r-- 1 root sys 3047 Nov 5 2008 com.sun.cluster.cfgchk.xml
    -rw-r----- 1 root sys 2581 Mar 28 2006 com.sun.scn.base.SCNBase.xml
    -rw-r----- 1 root sys 2921 Dec 4 2007 com.sun.scn.offering.ProductRegistration.xml
    -rw-r--r-- 1 root sys 2789 Dec 4 2007 com.sun.scn.offering.SWUPRegistration.xml
    -rw-r----- 1 root sys 1307 Feb 14 2007 com.sun.scn.sam.SolarisAssetModule.xml
    -rw-r----- 1 root sys 1010 Mar 17 2006 com.sun.scn.sensor.Sensor_Module.xml
    clnode1#
    6. Now reboot the system into non-cluster mode and add this node to cluster, ensure that cluster pre-requisites are met.
    7. do not regenerate the security keys unless otherwise required.
    **********************END**********************
    I advice you to try another way to deploy and register cluster modules into OS cac-1:default and enable cac-1:default if you can and let me know.
    -- T. Gajam.

  • Novell Access Manager J2EE Agent Installation

    First post and first time attempting to install NETIQ unto my desktop. I'm a little confused as to the section of "Novell Access Manager J2EE Agent Installation" and what to enter for my Admin Console IP Address, username, password, & Application Server IP Address?... I'm not sure as to where to get this information from,..so if anyone could assist me, I'd greatly appreciate it very much, thanks in advance.

    kpjones76,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • VALUATION TYPE AND STOCK MANAGEMENT

    When trying to do a Good Receipt on a subcontract PO against a line item with non-valuated material (UNBW) and Account Assignment "K" (cost center), the system is asking for a Storage Location and is putting the non-valuated material into stock.  We are using the UNBW material and the Acct Assginment K PO Line Item as a cost collector for services performed against a supplier.  The UNBW material should NOT go into inventory.
    CAN SOME ONE TELL ME IF THIS IS STANDARD SAP OR SOME CONFIG THAT IS MAKING THE NON-VALUATED MATERIAL SUBJECT TO STOCK
    THANK YOU IN ADVANCE

    Hi ,
    The goods in general can be managed for 1) Quantity update only : using material type : UNBW   2) Without quantity and without  Value Update : Using material Type : NLAG.
    This is the recommended standard SAP functionality.
    How ever , since you are processing the sub contracting orders , you ought to have at least stocks management by quantity.
    For material type UNBW : since this material type is meant for non valuated stocks , the value update does not take place( the value of goods of this material type is not included in the inventory value), but the quantities are always monitored.
    Hope this information will be useful .
    Regards
    raghuramam.

  • Where is  mobile stock management customizing guide ?

    Hello
    For CRM 2007 mobile stock management in Mobile service. Netweaver 7.1 mobile is mandatory. However, I could not find the IMG guide for this area. Such as connectivity setup between that and CRM or backend ECC. Has anyone done that part?
    Thanks
    Ming

    Hi Abishek
    I have read that part of the document. But that is more of a user guide. It describes the functionality. But what I need is how to implement the functionality.
    There is additional middleware component involved in this scenario, Netweaver mobile 7.1 DOE. But we can't find any document on setup and customizing. There are only few hints in release notes which does not give  us a good picture. So if you have seen this scenario working please let me know. Any hint is helpful
    Thanks
    Ming

  • Oracle Fuel Stock Management

    Anyone can tell me how i can get material for this module Oracle Fuel Stock Management?
    thanks
    kiran

    Hi Srinivas,
    Can you send me some docs on Oracle Fuel Stock Management extension to OPM. Need it urgently to perform a fit-gap analysis vis a vis other Oil Accounting solutions from Yokogawa & AspenTech.
    Pls send the docs to [email protected]

  • Stock Manager in j2me

    Hello,
    I want to create a stock manager in j2me similer as http://www.tinystocks.com/sm.html Is there any body help to give me idea. i want create this program for all java enabled devices. but i dont know where from i fatch the information of online stocking. Any body tell me please, is there any online service which i can access.
    can this program be created for any hend held devices.
    i explored this link but all are implemented in microsoft technology byt i want to develop in java.
    Any body can help me. i'll appricate all replies.
    thanks in advance
    Jack

    Do the following config in Table T588J to enable the manger field in IT0001. this will auto populate the chief of the org unit in which that employee belongs.
    60     1     1     1          ENAME     DD1
    60     1     13     1          ENAME     DAT
    60     1     34     1          PERSK     DD4
    60     1     41     1          PERSK     DAT
    60     1     46     1          PERSK     DTX
    60     1     75     0          PERNR     PIC
    60     2     1     1          PERSG     DD2
    60     2     13     1          PERSG     DAT
    60     2     15     1          PERSG     DTX
    60     2     34     1          WERKS     DD4
    60     2     41     1          WERKS     DAT
    60     2     46     1          WERKS     DTX
    60     3     1     1          OMNGR_NA     DD1
    60     3     13     1          OMNGR_NR     DAT
    60     3     23     1          OMNGR_NA     DAT
    60     3     52     1          KOSTL     DD4
    60     3     61     1          KOSTL     DAT

  • SQL Management Pack Agent Job Unit Monitors

    I am trying to utilize the SQL Agent Job Monitors included with the SQL Management Pack (page 81 of the MP guide), particularly the "Last Run Status" monitor. I have set an Override for "Generate Alerts" to True. The goal
    is to have an email notification sent when any SQL Agent job fails on a specific group of computers. However, I am not familiar enough with what "Last Run Status" is actually monitoring and if it will do what I am looking for. Does this monitor
    check the job status of any agent job on the target group? I tried setting up a job for it to fail, which it does fail, but it does not generate an alert. Any suggestions appreciated. Thanks.

    1) For monitoring SQL server job status, you can refer to the following blog
    http://blogs.technet.com/b/kevinholman/archive/2011/08/05/how-to-monitor-sql-agent-jobs-using-the-sql-management-pack-and-opsmgr.aspx
    2) For troubleshoot: Make sure that your SQL agent job is discovered, you may find the discovered job under Microsoft SQL Server --> SQL Agent --> SQL agent job status. By default, the discovery is disabled and you should enabled the discovery by using
    override.
    Roger
    Thanks. So I enabled Agent Job discovery for the systems that I want. It discovered those objects. Now, I still cannot get the alerting to work. I can see the Health State of the job change to a Warning, indicating "Last Run Status" equals Failed, but
    it is not generating an alert. I set Overrides (Generates Alert = True) on a Group that included one of the job objects, nothing. I also set the same Override directly on the job object and I still do not receive an alert. Any ideas? I
    noticed someone in the comments mentioned in the blog you linked, a similar issue, except with the Job Duration monitor. However, he was able to get alerts to generate by setting the Override directly on the Job object and noted that it is not a
    feasible solution due to the number of jobs he wants to monitor. Again, I tried the same, but still could not get alerts. That solution would not be acceptable for me either because of the number of jobs that I would have to set individual Overrides for.

  • Is Mobile 2007 Stock Management Service Compatibile with R/3 4.7

    Can any one tell me if I can implement Mobile Service - Service Parts management - Van stock with R/3 47 back-end
    Installation guide says ERP 6.0 as a landscape requirements..
    I have few questions
    Can Ii implement CRM Mobile 2007 Service Module including the Vanstock with a R/3 47 Back-end
    If I can what is the plug-in I use to integrate the Mobile database to CDB and to R/3
    Any help will be rewarded.
    Thanks
    Raj

    Hi Raj,
    For using Vanstock scenrios on the mobile service application, SAP ECC 6.0 and SAP Netweaver Mobile 7.1 are the minimum requirements.
    It cannot be implemented for any release lower than these because these functionalities/APIs are available from the mentioned releases.
    Best Regards,
    Pravin..

  • Problems Implementing SnapShots Scenario for Stock Management

    Hello All,
    I am trying to configure the Inventory Management with snapshots and I am using the snapshot scenario. According to the document I have created alternative ODS ODSSNAP and infocubes to accumulate 2LIS_03_BX, 2LIS_03_BF and 2LIS_03_UM.
    My problem is with the key figures ZTOTALST,ZVALSTCKV and ZVALSTCKQ.
    I am facing this problem in the ODS when i try to create the update rule for 2LIS_03_BX. I have the two Characteristics Unit and Currency automatically mapped but i don´t see the key figures of the ODS. I supposed that my key figures may appear without assignment but they don´t appear.
    I should have my key figures non mapped but instead I cannot see them.I tried with another standard infosource 2LIS_03_BF and I see my key figures.
    I have BW 3.5 patch level 20.
    Can you please let me know any ideas?
    Thanks
    TK

    OK, non cumulative are not stored in your provider but calculated on the fly:
    NonCum = InFlow - OutFlow.
    then you have to work with your good receipts and goods issue flow key figures....
    For your scenario, as far as I understood you just need to see a "snapshot" (latest know stock values) you just need to update your receipts and issues with summation in your ODS; your stock will then be calculated.
    Usually a "snapshot" scenario means that you want to store your stock at the end of each month for example; in this case you need to use cumulatives with exception aggregation "LAST" on your time period so that the stocks aren't summarized over time. This way you update your cumulative Stk KF is updated with goods receipts - good issues. Also remind that in this scenario you'll have to load the previous month stock into the next
    Stock July = Stock June + Receipts July - Issues July.
    As you realize, it can get quite complex...
    Please precise your requirement and we'll help you further since I am doing all kind of scenario re stocks...
    hope this helps...
    Olivier.

  • NSAPI in Access Manager & Policy Agent

    Hi all,
    May I know is it possible to use NSAPI to be a communication channel between policy agent and access manager?
    I have installed Sun One Web Server together with policy agent, access manager is installed in another machine.
    I've looked through all related documentation but could not find NSAPI for policy agent or access manager.
    Thanks in advance!

    Hi all,
    May I know is it possible to use NSAPI to be a communication channel between policy agent and access manager?
    I have installed Sun One Web Server together with policy agent, access manager is installed in another machine.
    I've looked through all related documentation but could not find NSAPI for policy agent or access manager.
    Thanks in advance!

  • Access Manager Policy Agent 2.2

    Hello
    Has anyone experienced the error noted below. This is occurring after Access Manager has validated the
    user and redirected the request back to the agent on the protected box.
    PolicyEngine: am_policy_evaluate: InternalException in Service::do_update_policy with error message:Policy query failed. and code:6
    PolicyAgent: validate_session_policy() status: Access Manager policy service failure (6)
    Any help will be greatly appreciated.

    Hi,
    Are you using a 2.1 agent ? If yes are you using a custom Authentication module ? try setting the com.sun.am.policy.am.library.loginURL if needed. Also check for valid certs if you are using ssl

  • Configuration Manager 2012 Agent Crashing - Faulting Application Name: CcmExec.exe

    We have recently experienced ~1,000 systems that have the SCCM 2012 SP1 client crashing every 5 to 10 minutes. The SCCM 2012 environment is SP1 CU3 and most SCCM clients are running the SP1 version of 5.00.7804.1000.
    The following errors are written in the Application Event Log every time this occurs:
    Log Name:      Application
    Source:        Configuration Manager Agent
    Date:          12/5/2013 8:32:07 AM
    Event ID:      669
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      %ComputerName%
    Description:
    The component raised an exception but failed to handle it and will be stopped immediately.
     Component name: KERNELBASE.dll
     Executable:
     Process ID:
     Thread ID:
     Instruction address: 8791750393037
     Exception code: -286326786
     Client version: 5.00.7804.1000
    Log Name:      Application
    Source:        Application Error
    Date:          12/5/2013 8:32:07 AM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      %ComputerName%
    Description:
    Faulting application name: CcmExec.exe, version: 5.0.7804.1000, time stamp: 0x50add6eb
    Faulting module name: KERNELBASE.dll, version: 6.1.7601.17965, time stamp: 0x506dcae6
    Exception code: 0xeeeefffe
    Fault offset: 0x000000000000bccd
    Faulting process id: 0x1120
    Faulting application start time: 0x01cef1be5aad21ad
    Faulting application path: C:\Windows\CCM\CcmExec.exe
    Faulting module path: C:\Windows\system32\KERNELBASE.dll
    Report Id: a24071a5-5db1-11e3-b5bc-d4bed936cdee
    Log Name:      Application
    Source:        Windows Error Reporting
    Date:          12/5/2013 8:32:07 AM
    Event ID:      1001
    Task Category: None
    Level:         Information
    Keywords:      Classic
    User:          N/A
    Computer:      %ComputerName%
    Description:
    Fault bucket , type 0
    Event Name: APPCRASH
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: CcmExec.exe
    P2: 5.0.7804.1000
    P3: 50add6eb
    P4: KERNELBASE.dll
    P5: 6.1.7601.17965
    P6: 506dcae6
    P7: eeeefffe
    P8: 000000000000bccd
    P9:
    P10:
    I also saw the post below regarding a similar issue, but nothing has helped resolve the issue as of yet. 
    http://social.technet.microsoft.com/Forums/en-US/5ad3d7d4-2a87-473d-8c9d-41ad100e134a/random-client-failures-ccmexecexe-exception-code-0xeeeefffe?forum=configmanagergeneral#30791e92-6dc3-4466-9e07-bc2552e6aa3b
    Any assistance or guidance is greatly appreciated.  Thanks!

    Yes, I know that this is an old post, I’m just trying to clean them up. Did you find the answer for this?
    By change do you have McAfee and have you told McAfee to exclude ccmexec.exe from AV scanning?
    http://www.enhansoft.com/

Maybe you are looking for

  • HT201272 My iMac can't get to previously purchased on my Apple ID to find Lion 10.7

    I bought Lion 10.7 on my MacBook Air from App Store; it's still there under Previous Purchases. Now, I went to update on my iMac to OS 10.7.4 and it says I need 10.7 first (iMac is running 10.6.8) but I can't figure how to access Previous Purchaes on

  • SQL*Loader-925: Error while parsing a cursor (via ocisq)

    Receiving the following error message when trying to use SQLLoader (on NT) >>> SQL*Loader-925: Error while parsing a cursor (via ocisq) ORA-00942: table or view does not exist Trying to use the application for the first time, logon using userid for w

  • Get VLC to do fullscreen float in Xmonad

    Hi, Short background: I have started to use XBMC for watching and organizing videos. Everything works great except playing the videos. I have a constant stutter about every 3-4 seconds and from time to time the picture freeze but the movie running in

  • Sync with Outlook 2010 does not work

    While it seems to work, showing the normal progess bar in iTunes - taking some time and feels like normal, no data is transferred from or to outlook. No difference with Outlook x32 and x64, iTunes is 10.2.2 x64. Reinstalled office and iTunes several

  • UK Skype Number - no need for country code?

     Hi Just bought a UK Skype Number here in Oz. Just double checking that for family in the UK, they just need to enter the 11 digit Skype number, not the UK country code as well- because it is an online number (eg. 0113 not +44 113 etc)?? Dont want to