Stock not consumned from own storage location

Hi all
Scenario is make to order scenario 
I have stock of raw material in my own storage location
but at a time of planned order is converted to production order error comes raw material shortage it means finish material ordered not consider my own stock, i want to consume my own stock for finished material production but its not happened what setting can i do for this
pl help me
Regards
Rahul

Hi Rahul,
It doesn't mean that that it doesn't consider your storage location stock.There may be some other problem are also there.
Do following checks.
- Check in Order.In Material Screen for that component Account Assignment is set (E).If yes then System will consider only Sales Order stock for Material Availability.This is due to In MRP 4 view of Material Master requirement type is set as Individual Requirement.Change it to Collective.
- Also Check in T.code OPJJ.
Check box for NO Storage Location should be Inactive. in this case system will consider All the storage location for material Availability.
Regards,
Dhaval

Similar Messages

  • Stock Overview per plant wise/Storage location wise

    hi
        is there any <b>transaction</b> or <b>report</b> to get Stock overview plantwise/ storagelocationwise ... except MMBE it gives particular material.. i want per particular plant or storage location total materials stock.
    I want stock report similar to <b>MMBE</b> it gives available stock per single material in a palnt but my requirement to print available stock per all materials in a given material along with storagelocation wise/batch wise and total quantity.
    Points guaranteed..
    Message was edited by: Ashok Parupalli
    Message was edited by: Ashok Parupalli

    There's quite a lot you can do in Logistics Info Systems to report on stocks across multiple materials.
    Other than that, it depends on what you really want to show - stock that's physically present (e.g. including vendor-owned consignment), stock that you own (e.g. including customer consignment or toll manufacturers' stocks); do you want to show quantities (doesn't usually make much sense for more than one material, of course, due to varying units of measure) or values, etc.
    Some of these data are quite expensive to read from a runtime perspective, in particular the "special" stocks (e.g. consignment).
    You also have to consider that stock you own but that's not physically present on site (e.g. customer consignment), or GR blocked stock, usually is not assigned to a storage location.
    If you give me some more info about what you're actually trying to achieve, I may be able to help you better.

  • SAP AFS - VL10B delivery from specified storage location

    Dear all,
    I have created STO for an AFS material.
    As this material is available in various storage locations of the supplying plant.
    Now I am trying to create delivery through VL10B, entered the Purchase Order, Plant and specific location in the material tab, but system is not generating any outbound delivery in the background.
    again, in VL10B, if I have not specified any storage location in the material tab, system is generating the Outbound delivery for multiple storage locations with reference to batch split.
    How come system is not picking the specified storage location in VL10B transaction.
    Can I specify the issuing storage location while creating the STO, so that during VL10B, automatically the system will pickup the same storage location.
    thanks in advance,
    urendra

    Dear Urendra,
    If you creating a delivery for an AFS material, system picks the stocks based on the allocation rule defined in the system. Hence first efine the allocation rule in the system.
    To achieve the functionality of issuing stock in case of a STO from a
    particular storage location kindly maintain the below customizing.
    1) Go to transaction J3AS -> arun detail -> define allocation logic ->
    stock sorting
    3) Here maintain a stock sort rule .
    5) To this sort rule you can assign fields in this case it would be
    LGONR with field values EW and QA
    6)Once that is done, give the priority to the storage location in
    accordance to your requirement.
    7) Assign this sort rule to the main Arun type following the
    path J3AS-> ARun type-> here select Arun type and then under allocation tab
    go to the allocation rule maintained , out here there is the option
    stock sorting.
    Once this is done the storage location picked would be in the order
    of the above mentioned priority.
    Only if there is no stock in storage location of higher priority
    will the stock be then picked from storage location of lower priority.
    I hope this helps.
    Regards,
    Rakesh

  • One SO but I would like Post Goods Issue from different Storage Locations?

    Dear All,
    Pls help me solve this issue below:
    I have one SO, Item xzy, Qty = 300 but I would like to Post Goods Issue from different Storage Locations (Qty = 100 for each locations)
    E.g I have 3 storage locations: A, B, C and need to assign Post Goods Issue authorizations to 3 users U1, U2, U3:
    - U1 can Post Goods Issue from storage location A only (but cannot from B, C)
    - U2 can Post Goods Issue from storage location B only (but cannot from A, C)
    - U3 can Post Goods Issue from storage location C only (but cannot from A, B)
    How can I assign the Authorization for users?
    How can I create Outbound Delivery:
    a. 1 SO --> 1 outbound delivery --> Post GI 3 times
    b. 1 SO --> 3 outbound delivery --> Post GI
    Thank you very much for your support
    Cao Huy.

    Hi Senthils,
    Pls see my comment below:
    For Authorization check for storage Location
    1. GO to the following Menu path
    Spro>Material Management> Inventory manangement and Physical Inventory>Authorization Management>Authorization check for Storage Location.
    Here you have activate authorization tick for storage location and plant combination.
    --> Done
    2. Set authorization for Authorization object MM_MSEG_LGO thro Basis for the combination of movement type and storage location
    for each user.
    --> Done
    There are 3 storage locations(A,B,C) in one outbound delivery, and when user 01 tries to Post GI this outbound, it means that the system will Post GI for all line items in this outbound, but user 01 has not authorization for location B, C.
    How can user 01 Post GI from only location A in this outbound???
    And then user 02 will Post GI from only location B in this outbound,
    user 03 will Post GI from only location C in this outbound.
    Thanks
    Cao Huy

  • How to block movement type 261 and 262 from several storage locations

    Dear Expert,
    Can we block the  261 and 262 movement type from several storage locations? These storage locations are not affected by the MRP run, where for the materials that have been moved to these storage locations their existance are not count. These storage locations could not be used for confirmation production order, therefore i want to block  261 and 262 movement type from these storage locations.
    Thanks
    Pauline

    Dear Pauline,
    if my understanding is correct abt ur query,
    1) you want in confirmation screen, Consumption should happen only from one storage location
    2) Rest all storage locations should not be allowed
    3) Maintain Storage location in BOM component view, in mass you can maintain in CEWB
    4) Now GO with SHD0, Make storage location field as Out put only, for CO11N Transaction
    Plz refer this link for SHD0 Demo
    [https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/transactionVariant-AStepbyStepGuidefor+Creation]
    Regards
    Madhu Kumar

  • Stock transfer order between two storage locations in IS Retail

    Hi,
    I want to have a Stock transfer order between two storage locations in the plant.
    I have activated the "Activate Stock Transfer Between Storage Locations", now i can create a STO and have the "Issuing SLoc" tab.
    Having that i get an error message "Not possible to determine shipping data for material XXX" Message no. 06280.
    I am trying to have the shipping data in customizing for set stock transfer - "Define Shipping Data for Plants", but my site is not listed due to the use of IS Retail. Is there a way to configure it?
    Tnx
    Lior

    Hola.
    Voy a contestar tu pregunta en espanol. Debes crear al centro  emisor  como  deudor  en la transaccion WB02  y ampliar a la organizacion  de compra.
    Posterior, debes crear al centro  receptor como  acreedor en la transaccion  wb02.
    Cesar Moreno. Funcional MM Retail.

  • Transfer material from one storage location to another storage location

    Is there any bapi  to transfer material from one storage location to another storage location

    Hi,
    You need to use the below BAPI
    BAPI_GOODSMVT_CREATE
    Regards
    Sudheer

  • File is not picking from the source location.

    Hi all,
    File is not picking from the source location. FTP is working properly and file is also placed in source location. I am new the XI, if anybody can give me the solution it would be really helpfull.
    Thanks to all.
    Korean

    Hi Majin,
      Check the folder path properly, check the file name( file name is case sensitive) you have given correct or not. See that your communication channel is active. Also check the cache status and check adapter status also by that you will come to know wht is the problem.
    Thanks,
    Ranjeeth.

  • QI stock from one Storage location to other

    I have a scenario where QM is implemented and Material is received in storage location "A" against purchase order through movement type 101.But for testing we need to send material to storage location"B"for testing. I want to send the material under inspection lying in storage location "A" to "B" for testing purpose. Is it possible to move stock under quality inspection , If yes through which movement tyep. Is there any process in QM which allows the stock under quality inspection to move.
    Thanks in advance
    Regards,
    Jeewan

    hi
    Goto MB1B and try with this movement types
    311 Transfer posting storage location to storage location in one step
    The quantity is transferred from unrestricted-use stock of the issuing storage location to unrestricted use in the receiving storage location.
    Possible special stock indicators: E, K, M, Q
    313 Stock transfer storage location to storage location in two steps - removal from storage
    The quantity is transferred from unrestricted-use stock of the issuing storage location to stock in transfer in the receiving storage location.
    Possible special stock indicators:
    • K Goods receipt for purchase order to consignment stock
    • O Goods receipt for purchase order to stock of material provided to vendor
    • E GR for purchase order or order to sales order stock
    • Q GR for purchase order or order to project stock.
    Regards

  • Serial numbers are not copied to new storage location for 311 mvt type

    Hi Guys
    I have 10 stock of material A in 001 Storage location ,which all the quantity is serial number managed
    I have transfered 10 quantity of Material A to 002 location from 001 location using 311 MIGO
    But serial numbers are not copied to 002 location after transfer posting
    001 and 002 are both are WM linked and belongs to same plant
    Can any body suggest good solution,how it can be done

    Hi
    1.Check in material master whether serial number management is active in Plant data/stor Tab and serial number profile is assigned
    2. Check while doing MIGO once if u enter the material and transfer qty you are getting the serial number tab or not
    3. If everything is ok, then after posting the document check the serial number status in IQ09, check the stock type and the storgae location in the serdata tab
    Regards
    Amuthan M

  • Has anyone picked materials from one storage location but confirmed TO to different storage location?

    The business does not want to use MRP areas to segregate materials between service part and production. What they want to do is separate service parts on deliveries at our shipping storage types (915/916) from MRP view. This requirement is primarily for our international shipping area. We may pick parts for an international shipment and the parts will sit on the delivery - not goods issued because we don't want to invoice - for up to 3 months. During that time, MRP sees the inventory so replenishment is not done in a timely fashion or parts may get stolen from the shipment for a production requirement because the inventory is seen.
    Could one solution be to create a non-MRP relevant storage location (say 1200) and place the shipping storage types in this storage location?  Then when the transfer order creates, the system would show the source to be from the MRP relevant SLoc (1100), stype (130), bin (A-01-A), - these are examples - with the destination to be to non-MRP relevant SLoc 1200, stype 915, bin (dynamic using the delivery number) 0080745298? Has anyone had this type of request or know of a way to satisfy the business requirements without different MRP areas? They also do not want to have two transfer orders - one with a 601 movement and one with a 311 movement.
    Any known solutions or outside-the-box thinking would greatly appreciated.
    Marla

    I don't have the solution, just some critical questions and hints
    Even a non-MRP relevant storage location can be warehouse managed.
    The stock is shown in any stock list as long it is not goods issued, no matter if it is stored in a
    non-MRP relevant storage location.
    Stock that is picked for a delivery is not available for others, it is reserved. A delivery is a MRP element and hence should be taken into consideration in the planning run.
    A non-MRP relevant storage location will only solve your planning issues if you move the material there if it is not yet picked  and allocated to a delivery.
    Do your thieves really use SAP to check if the stock is there, or do they just see the stock in the warehouse? As said, the non-MRP relevant storage location will not solve this issue since the stock is still visible.

  • STO - Delivery to be created from specific storage location

    Hi,
    My requirement is after STO creation stock would be consider from a specific Storage Location and if stock is not available in that specified storage location system should throw an error at the time of delivery creation(VL10B) or delivery would be created for the available stock in the specified storage location.
    Please advice what configuration to be done to achieve this functionality.
    Thanks,
    Victor

    Dear Venkatesh,
    Thanks for your prompt reply,
    But I could not find the Storage Location field in Purchase Order Header, checked in field selection layout 'UBF' and in table 'EKKO', wherein a Storage location field is available in Item Overview next to the receiving Plant.
    Plz help me out,
    regards,
    urendra

  • Stock valuation different for different storage location in same plant

    Hi SAP Gurus,
    Please provide me a detailed idea and solution for this.
    My client has simulated several transactions in MM.
    Say it has two storage location 1110 and 1120 under plant 1100
    Now in 1120 there are stock movements pertaing to a project (includes stock transafers from 1110 and issues made to project)
    Finally, the MB52 report is showing valuation of stock (unrestricted) at different rates for 1110 and 1120.
    My client is raising issue, saying the value should be same for stock under a single plant as valuation is done at plant level.
    Also, both the stock is under unrestricted category, so valuation should be same.
    What could be the issue?
    Any solution?
    The auditors will raise issue over this.
    Please help ASAP.
    Regards,
    Sumit

    Hi Sumit,
    In valuation using the moving average price (price control u201CVu201D), the system valuates goods receipts with the purchase order price and goods issues with the current moving average price.
    So, for Plant 1110 the rate could be the PO price used for procuring the material whereas for Plant 1120, it is the moving average price and hence the difference in rates.
    However the auditors would look after the Material Valuation at the Valuation Area level which is the Plant.
    Thanks,
    Ankur

  • Stock transfer between 2 different storage location

    Hello ,
    Is anybody can help ? We have below scenario :
    Plant : P1 P2
    WH  :   W1 (W1 cross 2 different plants P1 and P2)
    Storage Location : S1 S2 under W1
    We want MRP can trigger the replenishment between 2 different storage location within same warehouse
    but the warehouse is cross 2 plants
    Thanks !

    Dear Denny,
    Pls. maintain following setting which will fulfill your requirement :
    Go to Material Master -> MRP-2 View -> Special procurement type
    40     Stock transfer (proc.from alter.plant)
    Try above & revert in case any doubt.
    Hope this helps.
    Regards,
    Tejas

  • Where data come from in storage location automatically?

    Hi!
    In SPRO, if I select  the storage location automatically option (in movement type and in plant), when the systems creates the data automatically, where the data comes from?
    Thanks in advance.

    in the moment when you perform the first movement to this storage location, then SAP will extend the material master. Most fields in the material master storage location view are not storage location specifc, the are kept at client or plant level. Only a few fields are storage location specific. you either have to complete those fields later manually or you must not activate auto storage location creation .

Maybe you are looking for