Stock not posted to Inspection stock

Hi,
1. The inspection type 04 - Goods receipt from production is maintained in material master.
2. The Inspection plan is maintained
But the stock is directly posted to Unrestricted stock. When I check Goods receipt tab in process order, the stock type is Unrestricted. How come here the stock type is Unrestricted.
Please clarify.
thanks and regards
Murugesan

Hy,
Have you mark or tick for Post to Insp. Stock for that Inspection type in QM view of Material Master.If not then tick that selection and do the GR again.
Regards
Dhaval

Similar Messages

Displaying inspection lot (not posted in inspection stock) as mrp element

Hi guys,
we are implementing SAP QM. Our problem is that we are not using the inspection stock because we are also implementing a non-sap warehouse system. So we are not posting our goods receipt which have to be inspected in inspection stock but the inspection lot for the material is generated. Now we want to display this inspection lot in the transaction MD04. We suspect that we have to injoin in coding which we want to avoid. Has anybody of you experience or information with this issue? If yes I would appreciate your help a lot.
Thanks for your help and answers in forward. Of course I reward all answers with points.
BR,
Bernd
Message was edited by:
        Bernd Korder
Message was edited by:
        Bernd Korder
Message was edited by:
        Bernd Korder

Hi Ymreddy,
thanks a lot for your answer. Unfortunately the situation is as i had explained. We are implementing SAP QM and we also have to link a external warehouse-management-system with our SAP-system-landscape. So if we want to post the goods receipt, which has to be inspected by quality department, in our warehouse manangement system, we cant post anything if the goods are on inspection stock. Goods in inspection stock can only be posted out with usage of the UD (usage decision). But the goods receipt place in reality is too small for waiting of this decision from quaility and so the goods have to be posted in the warehouse. Because of this situation we can not use the inspection stock. If we would use SAP WM we would not have this problem. We handle this problem in using restricted batches for the goods receipts. So we can post the GRs in the warehouse system but you can not use it if the usage decision is not made. I hope i have made the situation a bit clearer to you now.
My problem now is, that the material requirements planning team wants to see in MD04 the goods which are in a inspection lot as you can see it in standard if you use inspection stock for these goods. But if the goods are not posted in inspection stock with the inspection lot you can not see it in MD04, unfortunately. My question is, are there any user exits, customizing settings or any experiences/ideas of you to handle this problem?
I appreciate your help a lot. So thanks for your help in forward.
BR,
Bernd

Inspection type 08 not posting stock to QI

Hi Friends ,
I have activated inspection type 01,08 for a material in the sending plant and 01,08 in receiving plant also for the same material . Now when we are creating sTO for the material , then in PO the stock type is "Unrestricted" , the lot is not getting generated for the material . We have to manually change the stock type in STO to QI to generate lot
NOTE : we are creating STO by considering plants as customers and vendors .So migo is against outbound delivery .
Can anybody help ?

Dear SAP PM
If the receiving material's QM view is having Inspection type 08, after that if the material receives any stock from other material it will go to quality stock only as per std SAP.
Please check the below points
Active check box should be checked for 08 inspection type in insp setup of material master
Post to inspection stock should be checked
Check whether any other inspection types are assigned to 08 origin. If so check the preferred inspection type in material master.
Check whether the quality not active check box is checked for 309 movement type at SPRO > Quality Management > Quality Inspection > Inspection lot creation > Inspection for goods movements
Revert back in case of any queries
Regards

Post to inspection stock indicator not selected

Hi
We have a material with LEER material type (i.e. empties) with serial numbers. We don't want it to post in inspection stock when GR is performed. I have deselected indicator "Post to inspection stock" in inspection type setup in material master. User performs 103 Mov Type in MIGO screen and an inspection lot is created. We enter results using serial numbers and make UD successfully.
MM user performs Release GR block stock and stock is moved into un-restricted using Mov Type 105 irrespective of inspection lot status (coz Inspection Lot was not stock relevant)
The only problem is that UD is done successfully despite inspection lot stock tab which shows quantities to be posted and lots are shown in QVM2 - Inspection Lots with Stock.
We want that when post to inspection lot stock indicator is deselected for the material, its inspection lot quantities posting status should be closed at UD and should never be appeared on QVM2.

hi
i think you have to activate the QM functions for delivery using the QM info record,use T code QV51 and for your customer and sales organisation assing the material for which you want to use the QM and specify whether you want to do QM before or after delivery
in Standard SAP for inspection type 12 you will not find the Post to inspection tab button
regards
thyagarajan

Post to Inspection Stock Problem

Dear Gurus,
What is the other ways for a material to be able to be posted in "QI stocks aside from MM02? I am referring to a production order when GR should be in QI stocks. I am using CO11N for production order GR not MIGO. Is there a setting in CO02 where I can set-up inorder for the stocks to be posted in "QI"?
Please advise.
Thanks and regards.
Ching

Ching
First of all , will you please tell us why you are looking for another option than MM02 for stock posting to QI.
The QM logic is as follows....
1 - We set the inspection set up in Material Master with inspection type 04, to create inspection lot upon release/confirmation of production order.
2 - We then process the inspection lot after carrying out the inspection to move the stock from quality to unrestricted.
If you do the settings in CO02, as suggested by others, you may not have the inspection lot created to process though the stock will be posted to inspection.
Can you be clear, on your requirement in detail
Regards
Mahesh

BAPI_INSPLOT_SETUSAGEDECISION is not posting the Stock

BAPI_INSPLOT_SETUSAGEDECISION is not posting the stock in usage decision. Is there any field needs to be set in BAPI or any seperate function module to set this?
Thanks in Advance.

Automatic Usage Decision Bapi
Regarding problem with QA11 - Force inspection Completion
Please give me reward points...

Post to inspection stock in inspection lot origin 12

hello,
any body please help me. when i am using inspection type 12(delivery general). in that i am not getting post to inspection stock field. how i get that. because my senario is when i am doing delivery stock should go quality and then only deliverd. because products are batch sensitive product. but when i am using that inspection type inspection lot is creating but stock is not posting to quality. how can i overcome this issue.
thanks and regards
bhakta

hi
i think you have to activate the QM functions for delivery using the QM info record,use T code QV51 and for your customer and sales organisation assing the material for which you want to use the QM and specify whether you want to do QM before or after delivery
in Standard SAP for inspection type 12 you will not find the Post to inspection tab button
regards
thyagarajan

Service item should not post to stock

Dear Experts,
I have the following scenario.
I have a service material (DIEN). And created a PO with Account assignment M with SO. I have done the GR, accounting entries are posted as:
+ KBS --> CoGS
- WRX --> GR/IR Clearing
Account entries are correct. But when I check in MB52, stock is there as a special stock with E/SO number. But in my case, it should not post to stock.
How to achieve this? Kindly explain please.
Regards,
Sham.

Hello Biju,
I am using the AAC as "C" now. It is working fine.
I have an issue here. I will explain my scenrio. It is actually a trading process.
we trade machines as well as the service (Implementation of the machine).
1. Create Sales Order with Material and Service and it internally creates PR with 2 item to vendor X as follows.
   M MAT 1 EA
   C SRV 1 EA
2. When we recive the material MAT, we do the GR, it goes to inventory.
3. For the implementation of machine in the customer premise, we go with the vendor X and implement the machine.
4. At this point, we do GR for service and accounting entry created in COGS for the service
   + KBS --> CoGS
   - WRX --> GR/IR Clearing
5. Vendor X raise the invoce and we pay the vendor
6. But the problem is, we invoice the customer after a month or two based on our terms with the customer. so until we bill the customer, the service cost is lying as cost in COGS expense account.
Is there any way to clear it from expense account to some receivable account? And the receivable account should be nullified when we actually bill the customer.
Kindly let me know, if I am not clear enough.
regards,
Sham.

BAPI_INSPLOT_SETUSAGEDECISION Error during quantity posting for inspection

Dear SAP Guru,
I used a BAPI call : BAPI_INSPLOT_SETUSAGEDECISION in my program to perform UD and post Q-stock to Unrestricted stock. The BAPI executed successfully for my developer user account but not for end user account login.
The BAPI returns an error as below:
Error captured in system: EQV 054Error during quantity posting for inspection lot 340005776022, manual proc. Required
Guess some authorization object for the BAPI_INSPLOT_SETUSAGEDECISION call is missing.
Have tried SE97 for possible Authorization Check for Start of a Transaction but not able to solve the problem.
Can anyone help? Really appreciate that.
Thanks and Regards.

Hi ,
Run the transction SU53 after the error with user login id , to see authorization .
Amol

Exchange Rate is not posting to respective GL account

Hello,
My user is trying to post Invoice receipt at rate 0.6(Ex.Rate) for $.1000 on June 10. Then post Goods receipt on June 12 system rate is 0.7 but system is taking current rate and not IR rate. If it takes current rate it is also OK but it is not posting to exchange gain or loss account.
Can anyone help me out in this error....
Regards
KK

Dear Krishna,
During MIRO postings, if any exchange gain or loss arise then it is treated as Price Difference Account and goes to the G/L Account you have configured in PRD Key in OBYC TCode. If it is not configured then SAP posts this exchange gain / loss amount on the original expense or stock G/L Account which would have been used in MIGO (Goods Receipt) posting.
Realized Exch Gain / Loss Amount is only posted when you carry out the payments to vendors. However you can create unrealized exch gain / loss using TCode FAGL_FC_VAL as a monthly process to meet your GAAP Requirement.
Regards,
Sanjay

Hierarchies - Showing not posted values.

Hi,
I've a query, I'm using InfoObject 0GL_ACCOUNT and a hierarchy for displaying it.
For some accounts, no values have been ever posted, but I wan't this accounts tho show when you expand the hierarchy.
Now when you expand the hierarchy only the accounts that have posted values are showing.
Is this possible ?
I'm using BW 3.5 SP15
Thanks in Advance,
Miguel P.

Hi,
As Jaya mentioned you need a Multiprovider on 0GL_ACCOUNT characterstic and Base Cube.
Take a look on the standard query 0IC_MC01_Q0001 which is bulit on Multi provider 0IC_MC01 in the query designer .Here the important Thing is The column caleed "All Mterias" ,which makes all the materials to be displayed in the report.
Similarly you need to take a KF which is only available in 0GL_ACCOUNT as an attribute. And restrct it with Info provider = 0GL_ACCOUNT. And take Tick mark(by right click on this column) for Constant selection and tick mark for "Display values not posted".
Foe more general info:
Re: "Dead stock" report
Re: Multiprovider(infocube + info object)
Re: How to display Fat/Medium/Slow moving materials in Query
Re: Inventory
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma

CO11N can not post the backflush material properly

Dear Gurus,
When I use CO11N to post a Backflush material, the system returns error logs " No stock posting possible for this material". Aside the warning and confirm straghtly, then I use COGI to post this error backflush material, It post successfully without any warnning message.
(PS: I have checked my material type in OMS2, the parameter was right. And I can use MIGO_561 to post this material.)
Why the CO11N can not post the backflush material properly, and then can be COGI properly ?
Thanks in advance for your kindly help.
BRGs
Sivan

Sivan,
This is due to missing entry in a customisation table T158.
Call Transaction SM30.Enter view 'V_158_ALL' for field 'Table/view'.Consider the entry for Transaction CO11 as a template and adjust the entry for Transaction CO11N correspondingly so that both entries are identical.Afterwards table T158 must be transported from the Customizing client into the other clients.
Regards,
Prasobh

K8N Neo4 Platinum 7125 not posting after overclock testing okay

Hi Guys,
I'm having a real stinker of a problem with my 7125 board. I have all good components, but can't seem to get this bastard to post reliably when I'm overclocking. I was thinking that it was my power supply so I bought a new Antec Neo3 650W supply and it doesn't matter. I also got a new Opteron 165 processor and it still has problems. I even RMA'd my board and then sent me a new one. Here is my setup.
7125 ver1
Opty 165
Crucial PC3200 Ballistix
Nvidia PCIE Gforce 6200 video
Antec Neo3 650W
2x Seagate SATA 80gig (matched) 7200.9
RAID 0 via the SIL 3114
extra 160 gig HD (using the Nvidia SATA port)
Pioneer DVD 109 DVDRW - pri IDE
Sony DRU-820A DVDRW - sec IDE
Hauppauge PVR150
3.5" card reader (connected via internal usb header)
Lian Li case
When I run the system at stock speeds everything works fine, including the initial posts.
However, when I overclock, everything is erratic. Sometimes, I can overclock the entire system to 290x3, 166, stable memory settings, and prime 95 orthos the out of it for days on end (max CPU at 49C), but when I select restart in windows, it shuts down fine, but will subsequently not post. I have to hit the reset key several times, then it recovers itself and undoes the overclocks.
I have tried all sorts of memory timings from the crucial info - it recommends 2.8V and 2-2-2-8 timings.
I have heard that my memory is good for overclocking, but I'm now starting to wonder if it is the MSI Neo4 board or the Nvidia Nforce 4 ultra chipset.
Could it be the Raid 0 on the Sil 3114? I haven't messed with this as I would rather have a RAID 0 setup, then a little overclock.
Is there a good NF4 ultra board out there that is better than this?
I can't imagine anything else to do except keep spending more money to eliminate more variables.
Your thoughts? Thx Nick

relax your CPU HTT freq. by 10-20Mhz and retest.
relax your memory timings e.g. from 2-2-2-8 to 2.5-3-3-8, to findout from where its comes then find optimal settings.

New H97 Gaming 3 will not POST with i5 4690 - Need an old CPU to reflash BIOS?

I just finished assembling my new computer with an i5 4690, H97 Gaming 3, 8GB Kingston DDR3 RAM, 600W PSU. I ordered everything from Amazon a week ago.
When I turn it on, it does not POST or beep, it just power cycles every few seconds. I don't know what BIOS version it has because nothing shows on the screen. I believe I an old version of the BIOS that is incompatible with the i5 4690 but I need the CPU to work to update the BIOS..
I'm not sure I am reading the compatibility list correctly. Are CPUs listed as "7918v10.zip" working on stock BIOS?
msi.com/support/mb/H97-GAMING-3.html#support-cpu
I will install an old CPU, reflash BIOS with current version, and replace the CPU with my i5 4690.
I read on Tom's Hardware that the Pentium G3258 is compatible with stock BIOS. Is this true?

Quote from: nealshireman7 on 21-February-15, 22:34:27
I believe I an old version of the BIOS that is incompatible with the i5 4690 but I need the CPU to work to update the BIOS..
Beliefs and computers are two opposite things.
http://www.msi.com/support/mb/H97-GAMING-3.html#support-cpu
Did you put it all in the case or is it still on the bench?

POST TO INSPECTION

dear expert's
In MM01 I selected POST TO INSPECTION that can be changeable.
I want to restrict the posting of this material to QULITY INSPECTION STOCK only.
Can you suggest me how to make settings for this
Thanks in advance
padmaraj

Hi,
Do the following settings in material master in Quality Management view -
1. Check "Post to insp stock" box
2. Check "QM Procurement active" n fill neccessary dat in QM control key, certification type, Target QM system
Regards,
Ganesh Satam
Award if Helpful

Stock not posted to Inspection stock

Similar Messages

Maybe you are looking for